Disable / re-assign key lock button on top of device

Hi,
I'd appreciate your help please.  How can I disable or re-assign the key lock button on the top of my 9320?
Thanks
Andy
Solved!
Go to Solution.

Hi Welcome to the Forums!
You can't disable or re-assign the key lock button on your 9320, But you can on the "Convenience keys", the buttons on the left and right side of your device. Here's how: Assign an application to a convenience key.
Cheers!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

Similar Messages

  • My lock button on top of my iphone 4 is completely stuck down. Also, my iphone completely shut off and will not turn back on and is nonresponsive to a charger. Is there a way I can revive it? Is there a way I can get my pictures and videos off of it?

    Please help me!!! The lock button on top of my Iphone 4 is pushed down completely and is stuck! And then yesterday I looked down and my iphone was completely black. It would not turn on seeing as how I could not push the top button to reset it to turn back on and then also it would not respond to a charge. I was wondering if anyone could suggest anything at all in how to turn it back on and bring it back to life and if there was any way I could save my photos and such off there! Thank you!!

    SIDE NOTE!!!!!!!!!
    This phone does NOT have water damage and was working just fine until i had this problem

  • HT4993 my lock button on top is stuck help

    how do i fix the lock screen on the top

    Mine is too! There is really no at- home way to fix this. There is something you can use to fix it MOMENTARILY WITHOUT USING THE LOCK BUTTON!!!!!!
    STEP 1: Go to settings.
    STEP 2: Go to General.
    STEP 3: Click Accessibility.
    STEP 4: Scroll down. Under Physical & Monitor, there should be a white box that says AssistiveTouch. Click on it.
    STEP 5: Click on. Now, you can turn it off and lock the screen without using the lock button (Which is stuck)! There should now be a little white dot in the area of you screen. You can actually control where it is by dragging it to a corner of the screen. If you click on the white dot and click Devices, you can see that you can do all sorts of things. You can rotate the screen, lock it, turn the volume up and down, and shake it (that's if you are to lazy to change the music)!  If you want to turn your iPod off, just hold down on the lock screen icon and it should bring you to the power slider! The only thing is, you have to plug the iPod in (As if you were going to charge it) for it to turn on!
    I highly recommend that you go to the closest Apple store. They will help you. The amount of which they charge you depends on how stuck it is. If it is minor, they won't charge you a whole lot. But if they have to take the whole thing apart, they will charge you a fair amount of money.
    If they cannot fix it at all, then they will give you a new iPod. That fee will be from $99 to $199! (But for a new iPod that's not too bad. I got mine for almost $300!)
    I hope this helped!

  • I have an ipad wi-fi cellular 32gb. Died in march after 3 month has been replaced now the replacement has died, holding home key and button on top doesnt work at all,  not even if left over night and the next day and night, still nothing.

    I was given a ipad after xmas 2012. Within a month it was freezing up and returned to apple to replace. It was sent straight back to me saying it was fine. The day I got it back it was faulty again only this time it was worse, it was switching itself off and turning itself back on when it liked. A back up and restore was completed AGAIN. 3 weeks later it was sent straight back to apple to be replaced, this time a higher authority from apple in brisbane said it was to be replaced immediately. Which it was. Then within 6 weeks this ipad the replacemetn ipad has started having issues by turing itself off. Now it has completely shut itself down and off. Charge was at 81%. I put it on charge as maybe the %% was wrong. A few hours later, tried turning it on by holding top button, nothing happened  I have also held down top button and home key for 10 sec, nothing so I tried longer nothing happened. Rang apple support and they have suggested holding top button down for 10 sec then add home key for 10 sec both top button and home for 10 sec then they top button off followed by leaving home key for 10 sec by itself. This did not work. I have tried this again this morning and again at lunch at work and again now tonight. Still nothing at all. Even plugging it into the computer doesn't do anything at all. Has anyone else come across this at all with two ipads doing exactly the same thing. My power points are fine, I've had an electrician check them and my computer is fine aswell. I stumped as to what can be going wrong. Thanks

    Is your battery dead or alive?
    If the battery is dead, we must find out if it is:
    1. Charger problem
    2. Cable problem
    3. Docking port problem
    4. Wall socket problem

  • My iphone 4 wont turn on. The lock button at the top doesn't work so I can't reset it.  What do I do???

    My iphone4 went blank, won't turn on.  The lock button on top doesn't work so I can't reset it.  It does nothing when I plug it into a receptacle or the computer.  What else can I try??????

    My iphone4 went blank, won't turn on.  The lock button on top doesn't work so I can't reset it.  It does nothing when I plug it into a receptacle or the computer.  What else can I try??????

  • HT4528 hard to press lock button. how can i fix it or how much would it be to fix it? i have Iphone4s and its only a year old

    My lock button on top of my phone does not work. In order for it to work it needs to be pressed really hard. Phone was not dropped or damaged and just started having this problem. Concerned because cannot afford a new phone so i would like to know how to fix this problem.

    If you're within the first year of purchase, or if you purchase AppleCare/Apple protection plan the warranty is extended to two years, then you can get the device replaced for free under warranty.  Just set an appointment at a local retail store or call 800-MY-APPLE to determine if a replacement device is needed.

  • My lock button doesn't work. It didn't break, it just stopped working

    Ok. So apparently during a workout outside, my brand new, month old iPhone 4S decides it wants to workout too. So I brought it to my workout, put it in a backpack, and set the bag down as I normally do. The dew on the grass that morning apparently casused enough condensation to trigger my litmus paper, and now my brnad new iPhone has no warranty, hence my question here. I have been searching for a week or 2 now on information for this, and can find nothing. Apple will do nothing but tellme they can replace the phone for $200 but then won't wanswer questions about the issue itself, and I seem to be the only iPhone owner in the world with this problem, so it's nowhere on the intarwebz.
    So my lock button, up top, on the shoulder, stopped working. It didn't break, it didn't get stuck down, it just stopped working. Like, the screen flashed (go to wake the phone up, it didn't wake up, so I pressed the button again, and it flashed on and then off again real quick, like normally would). Hit it again, nothing. Hit the Home button, woke up. Played with phone, etc, went to put to sleep...... nothing. Hit the button multiple times, nothing. Button still clicks down and functions as the button itself should, but no sleep or wake. The button only actually does what it's supposed to do when I hard reset, or the phone is off and I'm turning it on. I can't take a screenshoot of the phone, and every now and then my phone will be just sitting on the table or wherever, and it will wake up, the "Slide to Close" bar pops up, and then 15 seconds later, goes back to bed.
    Has anyone else experienced this issue, and what should I look at fixing inside? I have not taken this one apart yet as I don't have the tools anymore, waiting on them to get here, but I figure Apple has screwed me on my warranty, so I'm just going to fix it myself. Never had this specific issue before, so I'm not really sure what the **** is messed up until I can take a look inside. Any help until then would be wonderful. Sorry for the long back story, and thanks for looking.

    Your problem is rare from the symptoms you describe. Most lose the click function, yours still has it. Yours functions sporadically or only for certain functions. Maybe it is liquid damage causing this. Maybe it will dry and be OK.
    While waiting for your Pentalobe Screwdriver, try a Firmware Restore with iTunes. See if this helps. If you still decide to procede, the first step inside should be to carefully disconnect the battery at its connector. Also all the screws inside are different sizes, except for some of the Screen screws, so keep them well sorted.

  • N97 mini key lock problem

    Hi there NSeries experts!
    I couldn´t find a topic related to my question,
    so here´s my post:
    I´ve got a little problem with my N97 mini
    (type "RM-555" software-version: "11.0.102"):
    The key lock button at the side of the phone
    does not work properly in my eyes.
    Sometimes - yes, it does not show up every
    time you use it, only in about 50 % of usage -
    when you use the button it works "back and
    forth". That means, if you wanna lock the phone
    it gets locked and then directly unlocked again,
    although the button has only been used once.
    Same thing sometimes the other way round:
    The phone is locked, the button is used, the
    phone unlocks and directely locks itself again.
    It is not the worst bug I can imagine but after
    a while it is quite annoying.
    Does anyone have an idea what this is all
    about? Do you think it is more likely some
    hardware defect or rather more a software
    bug?
    Thanks for any help!
    If you need further Info about the phone,
    software etc. just tell me...
    Tom.

    Then if you want to try everthing before going to nokia, first try reset *#7370# , backup your data first. Still no success? Reflash with same firmware version via NSU. (back up your data in both cases)
    Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
    Current Phones: Nokia N9, iPhone 4

  • Key lock problem!!!

    I accidently pressed the key lock button and now my ipod is locked. I have NOOOO idea what my pass was and now I can't open my ipod. Please HELP!!

    Restore it in iTunes and it will clear the lock. Then Resync.

  • N79 Key Lock

    I am wondering how does "key lock" button is functioning. I have no idea is it working or not on my unit.

    By the way, if yours isn't working, try a Software Update, even if there's no new version of the software available. My handset's keylock hasn't worked properly (it comes and goes) since a service centre did a restore on it.
    Help I'm trapped in a sig factory.

  • Lock button on iphone is in an angle

    Hi!
    I was just wondering if the silver coloured "lock" button on top of the iphone 3gs is supposed to be in an angle down to the left, towards the SIM card slot? It works fine and all, just wanted to check.
    Best regards,
    Sebastian

    I am having same problem as this one. will warranty fix this problem? In Thailand, they said that the button function is still fine, they cannot do anything with it. I was so upset. I have to push the button really hard all time.

  • Stuck lock button on iPhone 4s, Stuck lock button on iPhone 4s

    My lock button on top of phone is stuck down slightly still works but have to push it harder. How do I fix it ?

    Hello Jsdima9113,
    The steps below can help resolve issues with a non-functional sleep/wake button on your iPhone.
    Sleep/Wake button won't lock or unlock iPhone
    To lock the phone, press the Sleep/Wake button. Note: By default, if you don't touch the screen for a minute, iPhone locks automatically.
    To unlock iPhone, press the Home button or the Sleep/Wake button, then slide the slider.
    If either of the above steps don't work, try turning iPhone off and then on again.
    If the iPhone will not power off, reset it.
    Try to lock or unlock the phone.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • Zen Touch - loose key-lock but

    I bought my Zen Touch last month. When I received it, the key lock-button has already been loose. Now, it falls out of the hole all the time. I have to keep an eye on it to avoid losing it. It bothers me so bad. Does it happen to other Zen Touch ownners? How can I get it fix? I still have the warranty for it's

    I have a Touch myself and, luckily, nothing like that happends with mine!
    As said, you can contact customer support to see what can be done! Hopefully you'll be able to send it back in to repair or get a new one in return!

  • I tried changing my password, and it changed to one that wasnt it, and i dont know it. So i tried it too many times and now its saying it is disabled, connect to itunes. but a problem is that my power button on top is broken. how to i fix it?

    I tried changing my password, and it changed to one that wasnt it, and i dont know it. So i tried it too many times and now its saying it is disabled, connect to itunes. but a problem is that my power button on top is broken. how to i fix it?

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

  • HT1459 i have an ipod touch that is amounted with WAY to many minutes and we do not know the password. i would reset it with itunes but i cannot turn it off for the top lock button doesnt work. how do i restore it to factory settings or fix the lock butto

    I have an ipod touch that i would like to restore to factory settings. Having said that the ipod is locked for over 1,000 minutes and i do not know the password. I know the trick of holding down the lock button and home button at the same time until the "Connect to iTunes" message pops up, but the lock button on my ipod does not work. Is there anything i could do? I really could use some help im very stuck!

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    Or try using this program to place the iPod in recovery mode
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Mail takes a long time to connect to outgoing server

    This has been touched upon in a number of threads but I'll post my own particular version in case anyone can throw any light on it. When sending emails (Mail 3.6, OS10.5.8) it can take up to 1 minute for Mail to connect to the outgoing server. In the

  • Error using Database addons with SQL query.

    I get a LabVIEW error when I provide the following SQL query to the NI database VI: ..vi.lib\addons\database\Connection.llb\Conn Execute.vi.  declare @SR_ID table ( script_result_id uniqueidentifier ) insert into @SR_ID select script_result_id from S

  • How to pass a range in OLEMethod?

    I have this code for inserting an image into a DOC: COleVariant varFile(szFilename); COleVariant varLink((BYTE)0); COleVariant varSave((BYTE)1); OLEMethod(DISPATCH_METHOD,NULL,pInlineShapes,L"AddPicture",3, varSave.Detach(), // Save in document varLi

  • ISchedulerTask - Access Resources

    Hi guys, does anyone of you know how to access a resource from an ISchedulerTask's "run" method? I want to access an XML-file that contains some configuration data. The XML-file is in the same PAR-file as the ISchedulerTask. Although they are in diff

  • Adding Tab to VL02N Transaction Using BDT

    Hi All, Can any one tell me how to add TAB to the transaction VL02N using BDT. Let me know the steps to add tab. Function guys knows very well about BDT if any one can tell me this it will be appreciated. Thanks in Advance