Disable/remove What's new in 4.4.4

I don't want the What's New feature popping up right next to Google Now when I swipe up from the Home key. How can I disable it? I wish to retain the Google Now feature though. I don't want to root the phone.

alexdon wrote:
You can block it like this:
1.Install ADB
2.Run ADB shell from Windows cmd
3.Write pm block com.sonymobile.advancedwidget.entrance (to reset it just replace block with unblock)
4.That's it (in some cases you might need to restart)
Me neither but I did get used easily to these steps.Install ADB (Android Bridge Debug) from that link on XDA.Click on the executable and select Yes only for ADB,for the ADB system wide and for drivers select No.It should install ADB. After that,open Windows cmd and change director to the folder where ADB is installed.You can follow the above steps from now on.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Similar Messages

Get rid of "What's New"

Please Sony give us a way to opt out of "What's New" . When I slide my finger up from home to launch Google Now I have to be careful not to open "What's New". We have Google Play Store, we know what apps we want, we don't need this! Don't force it on us!
PS: I know that you can get rid of that by rooting but that means (at this moment) unlocking the bootloader, which means losing the warranty. I'm not prepared to do that on a 600-650 euros device. Not to mention a lot of people who can't unlock the bootloader even if they want to.

As I understand, it's not possible to disable or remove "What's new" for the moment. And unfortunately, I have no information when or if this will be possible in the upcoming future.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Adb block command strange error on What's New

I have the latest android sdk and adb is running fine.
Ran pm block com.sonymobile.advancedwidget.entrance
reboot
Etc etc. But after reboot the **bleep** thing was still inside the app drawer. So I checked again. It seems adb is not recognising 'block' command. It knows 'hide' but that's also not working.
The entire world has removed What's New using adb. Please help why this block command is not working.

Usually for developing stuff you can either go to XDA or to our developer world:
https://talk.sonymobile.com/t5/Developer-World/ct-p/DeveloperWorld
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

I installed Firefox 29.01 but two pages keep popping up, my home page and the what's new in Firefox page. How do I stop the What's New page from popping up?

I installed Firefox 29.01 but every time I open it my home opens and so does the What's new in Firefox page. I want to disable the What's New page and only want the home page to open up but everytime I start Firefox both pages open up.

hello, this might happen when firefox is not able to properly save preferences in its profile folder. please try this: Click the menu button [[Image:New Fx Menu]] and then click help [[Image:Help-29]] > troubleshooting information > profile folder - "show folder". then a new window will open up. in this window look out for a file named '''user.js''' (it might be used to overwrite your custom settings). in case it is present , delete or rename this file and restart firefox afterwards.
for more information and other steps please also see: [[How to fix preferences that won't save]]

HT201401 I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

I changed my pass code and couldn't remember the new pass code. After several failed attempts, my iPhone has been disabled. What do I do?

If you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

HT4113 Iphone is disabled then how change new or remove?

Iphone is disabled then how change new or remove?

See if this helps: http://support.apple.com/kb/HT1212

Keeps coming up with "What's New" page everytime I open Firefox.

Everytime I open Firefox (5) it keeps checking whether my add-ons would work with it and then opens the "What's New" page. It's starting to get really irritating.
Is there a way to stop it from doing this?

I suspect a bad add-on. Since add-ons often are installed externally to Firefox, I suggest starting here:
Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
Then, in Firefox, open the '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Finally, you can "mop up" remaining issues with the scanning/cleaning tools suggested in this support article: [[Troubleshoot Firefox issues caused by malware]].
Does that clear it up?

What's New and What's Fixed in 2014.1

First, here are links to the two main documents about new features in the 2014.1 release:
Product Manager Al Mooney's blog: Premiere Pro CC 2014.1 Release
The What's New page in the Help: Adobe Premiere Pro Help | New features summary
(I'll review both of those documents ASAP to see if any little goodies got skipped.)
And now, the bugs that were fixed in this release:
Import
Import of CinemaDNG clip fails if the file has been renamed.
Gamma shift in some re-imported QuickTime IMX clips
Some QuickTime Reference files import without timecode.
Indexing of XDCAM clips can take an excessively long time, footage shows Media Pending until indexing completes.
XAVC-S files import without Timecode
Unable to import certain XDCAMHD 422 Long-GOP clips with Pixel Aspect Ratio of 0.7500 MXF
Spanned XDCAM HD422 clips not handled correctly if the clip names do not follow the normal convention
When a sequence is loaded from Media Browser to the Source Monitor and then inserted to a sequence without explicitly importing, two copies of the sequence are added to project.
Scaling values are not properly handled for clips/sequences imported via an XML file written by some shot management and conforming programs
If the reported duration of an XDCAM HD MXF clip shorter than the actual length in the file, then frames outside the stated duration can be accessed.
Some XAVC and XDCAM-IMX-MXF clips have audio noise introduced on playback
Some .mp4 have green frames and 'static' garbage when played in Source Monitor
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
PPro no longer recognizes timecode from a .qtc file, referenced from within a QuickTime reference movie.
Some XDCAM422 clips fail to import with generic error
Occasional crash on opening Source Settings for DNG footage, with 2nd monitor enabled
Overexposed white areas in some CinemaDNG footage display magenta artifacts.
When scrubbing C300 clips in Project panel’s Icon view, red frames sometimes show and Event panel reports error decoding frame.
If SpeedGrade was installed before Premiere, then double-clicking a prproj file launches SpeedGrade (Mac Only)
Growing Files
The last frames of some growing file are green. Must relaunch Premiere to correct the problem.
Importing a growing file can take an exceedingly long time, with footage showing as Media Pending
When a growing file refreshes, it stops voiceover recording
The incorrect timecode is shown in the Timecode Panel for growing files.
Timeline playback of growing files drops audio for about 1 second each time the growing file refreshes.
QuickTime reference files for growing files fail to import.
Export
When source is 120fps, export fails if Match Sequence Settings enabled
The Advanced XDCAM Settings section in Export Settings is blank for imported XDCAM presets
In QuickTime encodes, audio exported as uncompressed stereo imports into FCP as dual mono.
When you export to 5.1 AAC with the “Import into Project” option enabled, the resulting clip fails to import, throwing
“File import failure”
Image flicker is introduced in some constant-bitrate MPEG2 encodes
When the only variable blocking smart rendering is an adjustment layer, the effect(s) thereon are ignored and the segment is smart rendered.
ProRes media encoded by Premiere causes are not compatible with certain video QC programs.
AAF export: 88.2kHz and 96kHz audio clips exported to AAF do not appear in some audio production programs.
Audio EDL gets wrong source timecode if clip is nested or part of a multicam source sequence
EDL does not give correct Source In and Out for clips with speed reversed.
EDL does not give correct source in and out on reversed clips.
OMF export fails with some multicam sequences, reporting Audio Export Failure.
Hang during OMF export when the sequence contains a 5.1 audio track/clip.
Smart rendering can introduce black and red frames
Playback
Playback of IMX 50 clip freezes after 12 seconds.
With XDCAMHD and DVCProHD footage, frames are sometimes dropped though the render bar is green.
Audio for some mp4 files plays back at double speed
When pre-roll is set to 1 frame, timecode and video of XDCAM .mxf files are out of sync
Some DNxHD do not decode properly, resulting in frames being played out of order
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Audio
With Maintain Pitch enabled, no audio when playing at slower than real-time
Solo buttons in Audio Meters do not work for clips loaded into the Source Monitor
Mono and Standard track puck and tray panner routing for Ls, Rs, C and LFE channels do not adhere to ITU-R BR.1384 standard.
Occasional crash on switching a clip from mono to stereo via Modify>Audio Channels
5.1 channels are not properly mapped for some Dolby content.
5.1 clip changes to a 6 mono channel clip when “Extract Audio” or “Edit in Adobe Audition>Clip” is performed on a project item or track item.
Changes to Frame Rate via Interpret Footage are sometimes not applied to saved for all audio streams, causing most audio channels to be out of sync after closing/reloading project.
Constant Power audio transitions introduce buzz if either track item has zero channels (generally limited to multicam clips)
Crash on applying changes in Modify Audio Channels dialog [Mac Only]
Project Panel
Sorting by Duration is broken if the column has been moved during the current session
If the Project panel is filtered via Rapid Find when a bin is created, the edit control for naming the new bin does not become active automatically, and it cannot be activated manually until Rapid Find is cleared.
Project items cannot be deleted or renamed if the list view is scrolled to the right.
Project panel does not autoscroll to the left when a column is dragged to the right side of the Name column
When a timecode value is typed in the Video Out control for a clip in the Project panel, the value gets reduced by 2 frames upon committing the change
Subclip
When a soft subclip with only an Out Point set is edited into a sequence, the Subclip Start is ignored; the resulting track item extends all the way to Media Start.
The Media Start/End and Subclip Start/End times for subclips from a merged clip are incorrect
Editing/Timeline
3-Point edit: If the source is a sequence and only an Out Point is set for the source, the wrong segment gets inserted when KEM Roll is set to Insert as Individual Clips
Keyboard trim commands do not affect clips on targeted tracks that are outside of visible area of in the Timeline
Switching between sequences can turn the render bar red.
Frame Hold option doesn't generate the freeze frame when speed change is in effect
In the Timeline, the FX badge gets hidden when the clip is not wide enough to show the full clip name.
If the Left/Right Balance control is displayed in Timeline header, the balance will change if the mouse strays over the Header region during click-and-drag operations in the Timeline (such as trimming out)
'Select In to Out' selects clips on locked tracks.
Multicam
If time-remapping is used on a Multicam Source Sequence, the Program Monitor's multicam view continues to play at 100%; if source sequence was slowed, the Composite view goes black after the original end point.
When a multicam source sequence has been slowed down via speed change or time remapping, the extended of the clip goes black—no video
If the audio in a multicam sequence is selected when it is flattened, the audio is sometimes deleted.
Disabled multicam source clips are sometimes rendered to the composite output
The camera can be changed for a multicam clip on a locked track.
The overlay displays timecode in audio time units for part of a multicam sequence if the source clips are stereo and the MC sequence is mapped to mono
If a nested multicam sequence's duration has been increased via Time Remapping, then upon reaching the original end point during an editing pass, the composite view restarts from beginning
Flattening
If a multicam sequence’s audio is 5.1 or adaptive, then flattening deletes the audio.
Crash on flattening multicam clip with keyframed scale when using a camera angle that does not start at time zero.
Flattening multicam can remove some audio clips from the sequence.
Flattening a multicam sequence with reverse speed applied results in incorrect frames being used
Effects
AE Text Template] When text fields are active for editing, they’re not being visually highlighted
Adding mask points very close to each can result in the ordering of the points being incorrect
Incorrect scaling of 1920x1080 adjustment layers in 720 sequences
Unexpected behavior with Cross Dissolves between Adjustments Layers.
Applying both Echo & Levels effects to an adjustment layer causes video playback to freeze
Crash on rendering previews for a Lumetri filter in Software-Only mode.
Crash on deleting a clip from a sequence after pasting an effect mask to the clip.
JPG frame sequence gets scaled down if an adjustment layers is in effect above it [OpenCL only]
Rename GoPro lens distortion presets to include the camera name
Clip name effect doesn't work correctly if Source Track is set to a different track.
Crash on using Clip effect or Timecode effect on a transparent video.
Crash on loading or applying VST Effects (Mac only)
Intermittent Crash with Warp Stabilizer applied (AEVideoFilter)
The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip.
Crash on applying audio transition to clips with overlapping timecode
Previewing fails when an adjustment layer has an animated mask applied to Opacity and any other video effect.
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Masking and Tracking
Shift-dragging a control point for an effect mask sometimes yields unexpected results
If a clip has an effect with a mask applied, moving the clip in the Timeline cause rendered preview files to be lost.
Previews rendered to a P2 codec are incorrect for the first 10-30 frames of an Opacity effect with mask applied
If a mask is applied to a GPU accelerated effect on an adjustment layer, the Program Monitor shows a cropped frame with Playback Resolution at Half and goes completely black at Quarter.
Opacity effect on Adjustment Layers fails to render within the mask with tracking.
After rendering an adjustment layer with multiple effects with masks applied, some of the effects are no longer confined within the mask [Mac only]
Crash on opening some projects with masking and tracking applied to effects
Direct Manipulation control fails to switch between multiple masks that are applied to the Opacity intrinsic effect.
3rd Party
Certain audio filters cannot be applied to a clip in a sequence that is imported via XML
PPro reports audio filter missing when opening a saved project with certain audio filters applied to the clips in a sequence that was imported via XML
Artifacts are introduced when using certain 3rd party transitions.
Certain 3rd party stabilizer plug-in are not working
Markers
On mouse-up after adjusting the Out point of a marker with duration, the playhead jumps to the marker's In point.
Video in Program Monitor strobes when dragging the In or Out point of a sequence marker
GPU
With GPU acceleration enabled, Gamma is being applied to some RAW media when it shouldn’t be.
Basic 3D effect can result in Program Monitor’s video overlay to become corrupted on some GPUs
Performance (Note: Most of these fixes are also listed under a product area)
Locking all Audio Tracks can significantly impair performance.
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Navigating through projects in multiple Media Browser panels impairs performance and can culminate in a crash
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
Interop
Crash on selecting Edit>Edit in Adobe Audition>Sequence...
When a 5.1 clip is sent to Audition via Edit Clip In Adobe Audition, the first channel is used for all channels.
Exporting from Audition to Premiere Pro opens Premiere, but the file fails to import
After grading a sequence in SpeedGrade, Premiere regenerates index & pek files
Miscellaneous
With some capture card hardware, captured uncompressed clips have the wrong field order
In the Overlay Settings dialog, the Track control is not properly constrained by the Property control.
A single preference flag is used for the "Import into Project" setting in the Export Settings dialog and the Export Frame dialog; they should be managed independently.
Custom scratch disk location for Video and Audio Preview folders get’s reset to default, “Same as Project File"
Changes to the label color cannot be undone.
In the Usage lists, all instance are ordered by track item start time; should sort by Sequence Name first, then by track item start
Automatic relinking fails in certain cases when the name of a folder in the relative paths are too similar. [Mac only]
With OpenCL GPU acceleration and Transmit enabled with some 3rd party I/O cards, the video on the output monitor is corrupted
Newly created projects sometimes have multiple Project Panels open.
And in closing, a request: If this post prompts you to think "Great, but what about..." or "Thanks, but I just found this new bug in 2014.1," please start a new thread--after, of course searching to see if there's already a topic on that issue.
[And Shooter, I apologize in advance if the foregoing contains any typos ;-)]

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

What's New in Audition 3.0?

Don't have time now to get into how they help, but I would just like to say that there is MUCH improvment in Audition 3.0...I'd like to say this because I've heard lots of grumbling on other forums about 3.0 not being an upgrade at all over the previous versions 1.5 or 2.0, this is completely false, for me in particular the improvement in MT View (editing: collectively trimming, duplicate entire track and fading improvements) are indispensable.
and most people don't even mention any improvement aside from spectral view (which is pretty big in itself, isn't it?) spot healing etc...which I haven't even used yet.
I just want to say, they definetly made some good improvements, while they may not be overwhelming to some they are entirely useful in my situation and I think for most people they would come to see they are definite improvements if they used it long enough.
Getting started / New features
What’s new
Record and mix
Adobe Audition 3.0 is a powerful tracking and mixing application. Mix faster with new automatic crossfades, clip fade handles, and automation-editing improvements. Take full advantage of the latest hardware with multicore processor support and an optimized mixing engine.
VST plug-in manager
Quickly enable or disable specific VST plug-ins, optimizing performance. (See Enable VST effects.)
Auto crossfades and clip fade handles
Simply overlap clips to crossfade them, and adjust fade curves with on-clip handles. (See Fade or crossfade clips in a track.)
Improved multitrack editing
Efficiently edit sessions with these key enhancements:
Collectively trim and fade grouped clips. (See Grouping clips.)
Ripple-delete ranges of clips, instantly removing time gaps. (See Trimming and extending clips.)
Adjust selected ranges of automation points. (See Edit automation envelopes.)
Duplicate the contents of entire tracks, including clips, effects, and automation. (See Duplicate a track.)
Simultaneously view all input and output levels to comprehensively monitor a mix. (See Monitor levels.)
XML session support
Save sessions to XML format and other shared standards for multitrack applications. (See Save multitrack sessions.)
Mix down directly to Edit View
Quickly output a session directly to Edit View, without first exporting a file. (See Create a single audio clip from multiple clips.)
Video previews for surround mixes
Watch a preview in the Video panel while adjusting mixes in the Surround Encoder. (See Previewing video.)
Create and arrange
Adobe Audition 3.0 offers powerful and extensive looping capabilities, as well as support for VST instruments, making it easy to create and arrange great-sounding music. Improved processing, including the high-quality Radius time-stretching engine from iZotope and numerous new effects, gives you infinite creative options.
MIDI tracks and piano-roll editor
Import, record, and edit MIDI, and output it through VST instruments or hardware synthesizers. (See Composing with MIDI.)
New effects
Explore creative sonic possibilities with Convolution Reverb, Analog Delay, Guitar Suite, and other new effects. (See Effects reference.)
Radius time-stretching from iZotope
Access industry-standard algorithms in the updated Stretch effect, as well as the File Info and Audio Clip Looping dialog boxes.
Bitmap audio images
Export spectral graphs for detailed editing in an image-editor like Adobe Photoshop®. Or, import visually-oriented graphics as source material for experimental sound designs. (See Spectral Bitmap Image (.bmp) and Import a bitmap image as audio.)
Improved CD ripping
Automatically import track information from your favorite CD database. (See Extract CD tracks with the Extract Audio From CD command.)
Enhanced file sorting
Sort files by track number, or by the date they were opened or created. (See Change how files appear in the Files panel.)
Customizable workspaces
Tint panels and dialog boxes to suit your working style. Add favorite commands to the shortcut bar. (See Change interface brightness or tint and Display the shortcut bar.)
Edit and master
Adobe Audition 3.0 includes a full set of editing, restoration, and mastering tools that give you unprecedented flexibility and control. Comprehensive waveform-editing tools combined with innovative spectral frequency brushes let you edit with power and precision. The new Mastering effect, phase correction tools, and Top/Tail view make Adobe Audition 3.0 the ideal audio editing and mastering environment.
Spot Healing Brush
Quickly brush over artifacts to seamlessly remove them. (See Select artifacts and repair them automatically.)
Effects Paintbrush
Create free-form selections, and layer brush strokes to determine the intensity of effects. (See Select spectral ranges.)
Marquee pan and phase selections
Process discrete stereo information such as center-panned vocals in Spectral Pan Display or out-of-phase audio in Spectral Phase Display. (See Select spectral ranges.)
Play spectral selections
Play back selected frequency, pan, and phase ranges to precisely restore and process audio. (See Play audio linearly.)
On-clip fade and gain controls
Visually adjust selections or entire files. (See Visually fading and changing amplitude.)
Top/Tail View
Fine-tune loop transitions by simultaneously viewing the beginning and end of files. (See View the top and tail of an audio file.)
Mastering effect
Optimize audio for maximum impact with a series of professional processors. (See Mastering effect.)
Adaptive noise reduction
Quickly correct a wide range of variable broadband noise. (See Adaptive Noise Reduction effect.)
Graphic Panner
Visually adjust the stereo field to enhance spatial perception. (See Graphic Panner effect.)
Play lists
Organize and play marker ranges for live performance and broadcast. (See Creating play lists.)
Efficient file opening and saving
Specify default formats for Open and Save As dialog boxes, and quickly save groups of files to one format. (See System preferences and Save a group of audio files to one format.)

ah guh suk yuh dutty sket mudda bumbohole battybway!
It's a very helpful post because there is people who come to this forum when trying to decide to what recording software too purchase, and there's also people all over the internet who say that Audition is not better then Pro-Tools and more amateurish when in many regards it is more professional and has a better interface and GUI, especially if you're not doing too many tracks (less then 16 or perhaps more on a high end system). It's multi-track is easy and stays out of your way, has great automation, and some updated editing capabilities and has an excellent mbc that pro-tools does not have (maybe not excellent but very good)..and I believe pro-tools is a cpu hog doing certain things just like Audition is.
So people come to this site and I'm going to tell them the truth that it has been added to nicely since Adobe bought it and hopefully if people buy it will have another update to make the multi-track even better. It has a few bugs and downsides but so does pro-tools, I think the upsides are greater then pro-tools.
The only downsides are the midi is a bit lacking compared to other programs which have been in the midi-game longer, and that it does use alot of cpu for certain efx, and the multi-track is better in some ways but not as advanced in others in terms of sequencing and arranging, it could improve in that area, loops and stretching loops to match each other then being able to record how you bring the loops in and out in a sequence like ableton but in it's own way then it would rule the world forever.

Disabled remove icon of collaboators in Auction Template

Hi Sourcing Guru!
I duplicated an Auction Template and tried to remove some collaborators from it.
However, remove icon for each of them is disabled. Therefore, I could not remove them.
Do you know why remove icon was disabled? And How do I remove some of collaborators from Auction Template ?
Thank you in advance.

Hi Vikram,
We are using release 5.1.10.
I understand that the new Auction Template reflects the change.
But this is not what I want to do.
My original question is that is if we can enable remove icon for collaborators when I duplicated the existing template.
Obviously the duplicated one inherited collaborator attribute from the existing one. And it has disabled remove icon too.
The reason we tried to do instead of creating new one is that the existing template already includes all necessary information. Therefore, we do not want to lose them except collaborators.
Is there any way we can do this?
Thanks a lot.

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

It is asking me for a password when I want to update my ipad, it has never done this before. I thought it ment my Apple ID but it didn't work and my ipad is now disabled. What should I do ? Is there a way of getting my password sent to me ?

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

What's new in the BIOS Update v2.00 for Satellite L505-144

What's new in the BIOS Update v2.00 for Satellite l505-144
Thanks

Hi mate
As far as I know Toshiba European driver page does not provide any details what has been changed in the BIOS.
But I found some details on Toshiba US page.
It seems that Fn+N+1/2/3/4 debug function has been removed in BIOS 2.0 to avoid keyboard abnormal behavior.
Greets

Photo editor app now available but doesn't work, after latest What's New update

hi all
odd experience what I wanted to highlight with you all.
I've just had an updated (this morning) to What's New build 3.0.A.0.2
After installing this patch / update, I was then told that "Photo Editor" was available to download. Build is 5.0.A.0.12
As far as I'm concerned I've not had this app on my phone before - checking in system apps reveals this is a fresh install, rather than an update to an existing app.
Also, I've not worked out how to run it, as there's no app shortcut on my homescreen. The app is not visible in the app picklist (when adding new items to my homescreens) either. Nor is the app in the main app list (accessed with the 6 dots button in the middle of the permanent shortcut panel on the homescreen).
I've even tried using a very useful app "quick shortcut maker" and although I can find photo editor in its activity list, when i test the generated shortcut, I get "unfortunately, photo editor has stopped".
Any ideas?
I do have some apps disabled, so does photo editor have any known dependencies?
EDIT: I've tried clearing photo editor data and restarting - no change.
Cheers,
Gary
Solved!
Go to Solution.

Hi MyAliasIsGary
Photo Editor is a system app only, it is available for use when editing photo's through your Album or Photo's app. For example, if you go into Album > tap on a photo > tap the icon at the bottom that looks like a pencil on paper > tap Photo editor.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

What's new in Font Folio 11.1?

Looks like Font Folio 11.1 released today, per http://adobe.com/products/fontfolio.
Can anyone tell us what is new in the past 5 years? I had hoped for some better glyph coverage in fonts like Utopia, but I don't see any evidence of that in the documentation, but I'm still hopeful?
The list of 80 additional fonts does not seem all that exciting for Western users, but perhaps much more so for users of other Arabic, Hebrew, Devanagari, etc.
Comparing the PDF font listings, here's what the new faces are:
HypatiaPro-ExtraLight.otfHypatiaPro-ExtraLightIt.otfHypatiaPro-Light.otfHypatiaPro-LightIt.otfHypatiaPro-Regular.otfHypatiaPro-It.otfHypatiaPro-Semibold.otfHypatiaPro-SemiboldIt.otfHypatiaPro-Bold.otfHypatiaPro-BoldIt.otfHypatiaPro-Black.otfHypatiaPro-BlackIt.otfKinesisPro3-Light.otfKinesisPro3-LightItalic.otfKinesisPro3-Regular.otfKinesisPro3-Italic.otfKinesisPro3-Semibold.otfKinesisPro3-SemiboldItalic.otfKinesisPro3-Bold.otfKinesisPro3-BoldItalic.otfKinesisPro3-Black.otfKinesisPro3-BlackItalic.otfAdobeTextPro-Regular.otfAdobeTextPro-It.otfAdobeTextPro-Semibold.otfAdobeTextPro-SemiboldIt.otfAdobeTextPro-Bold.otfAdobeTextPro-BoldIt.otfTrajanPro3-ExtraLight.otfTrajanPro3-Light.otfTrajanPro3-Regular.otfTrajanPro3-Semibold.otfTrajanPro3-Bold.otfTrajanPro3-Black.otfTrajanSansPro-ExtraLight.otfTrajanSansPro-Light.otfTrajanSansPro-Regular.otfTrajanSansPro-Semibold.otfTrajanSansPro-Bold.otfTrajanSansPro-Black.otfMyriadArabic-Light.otfMyriadArabic-LightIt.otfMyriadArabic-Regular.otfMyriadArabic-Italic.otfMyriadArabic-Semibold.otfMyriadArabic-SemiboldIt.otfMyriadArabic-Bold.otfMyriadArabic-BoldIt.otfMyriadArabic-Black.otfMyriadArabic-BlackIt.otfAdobeDevanagari-Regular.otfAdobeDevanagari-Italic.otfAdobeDevanagari-Bold.otfAdobeDevanagari-BoldItalic.otfMyriadHebrew-Light.otfMyriadHebrew-LightIt.otfMyriadHebrew-LightItAlt.otfMyriadHebrew-Regular.otfMyriadHebrew-It.otfMyriadHebrew-ItAlt.otfMyriadHebrew-Semibold.otfMyriadHebrew-SemiboldIt.otfMyriadHebrew-SemiboldItAlt.otfMyriadHebrew-Bold.otfMyriadHebrew-BoldIt.otfMyriadHebrew-BoldItAlt.otfMyriadHebrewCursive-Light.otfMyriadHebrewCursive-LightIt.otfMyriadHebrewCursive-Regular.otfMyriadHebrewCursive-It.otfMyriadHebrewCursive-Semibold.otfMyriadHebrewCursive-SemiboldIt.otfMyriadHebrewCursive-Light.otfMyriadHebrewCursive-BoldIt.otfKazurakiSP2NLight.otfRyoDispPlusN-Medium.otfRyoDispPlusN-Semibold.otfRyoDispPlusN-Bold.otfRyoDispPlusN-ExtraBold.otfRyoDispPlusN-Heavy.otf
I suppose one answer is just "upgrade and find out." Looking at the case of Utopia, can I assume that the latest version from UtopiaStdReadMe.html is available? For instance, it reads:
    The following faces have version 2.096:
     UtopiaStd-BlackHeadline created Fri Dec 17 18:01:27 2010.     UtopiaStd-BoldCapt created Fri Dec 17 18:01:28 2010.     UtopiaStd-BoldCaptIt created Fri Dec 17 18:01:28 2010.     UtopiaStd-BoldDisp created Fri Dec 17 18:01:28 2010.
     UtopiaStd-BoldDispIt created Fri Dec 17 18:01:28 2010.     UtopiaStd-BoldSubh created Fri Dec 17 18:01:29 2010.     UtopiaStd-BoldSubhIt created Fri Dec 17 18:01:29 2010.     UtopiaStd-Capt created Fri Dec 17 18:01:30 2010.     UtopiaStd-CaptIt created Fri Dec 17 18:01:30 2010.     UtopiaStd-Disp created Fri Dec 17 18:01:30 2010.
     UtopiaStd-DispIt created Fri Dec 17 18:01:31 2010.     UtopiaStd-SemiboldCapt created Fri Dec 17 18:01:32 2010.     UtopiaStd-SemiboldCaptIt created Fri Dec 17 18:01:32 2010.     UtopiaStd-SemiboldDisp created Fri Dec 17 18:01:32 2010.     UtopiaStd-SemiboldDispIt created Fri Dec 17 18:01:33 2010.     UtopiaStd-SemiboldSubh created Fri Dec 17 18:01:33 2010.
     UtopiaStd-SemiboldSubhIt created Fri Dec 17 18:01:34 2010.     UtopiaStd-Subh created Fri Dec 17 18:01:34 2010.     UtopiaStd-SubhIt created Fri Dec 17 18:01:34 2010.
The following faces have version 2.097:
     UtopiaStd-Bold created Wed Mar 16 14:24:26 2011.     UtopiaStd-Bold created Wed Mar 16 14:24:26 2011.
     UtopiaStd-BoldIt created Wed Mar 16 14:24:24 2011.     UtopiaStd-BoldIt created Wed Mar 16 14:24:24 2011.     UtopiaStd-Italic created Wed Mar 16 14:24:25 2011.     UtopiaStd-Italic created Wed Mar 16 14:24:25 2011.     UtopiaStd-Regular created Wed Mar 16 14:24:26 2011.     UtopiaStd-Regular created Wed Mar 16 14:24:26 2011.
     UtopiaStd-Semibold created Wed Mar 16 14:24:27 2011.     UtopiaStd-Semibold created Wed Mar 16 14:24:27 2011.     UtopiaStd-SemiboldIt created Wed Mar 16 14:24:25 2011.     UtopiaStd-SemiboldIt created Wed Mar 16 14:24:25 2011.
version 2.097 created 2011/03/16
     Utopia Std
     Utopia Std
version 2.096 created 2010/12/17
     Added code at end of name ID 3 'Unique Name' to indicate licensing foundry.
     Remove deprecated ForceBold keyword from CFF table.
     Update OS/2 table to version 4: add WPF names name ID 21 and 22 to name table, if needed.
version 2.076 created 2009/11/23
     Corrected font menu names in name table for Mac platform names. Name
     ID's 1,2 16 and 17 are now written following the same rules as the
     Windows platform names. Previous releases put the Preferred Name
     and Style in Mac platform name ID 1 and 2, and did not write name ID
     16 and 17, for legacy issues with old Mac OS versions.
version 2.066 created 2009/08/11
     Added Windows platform name ID 8- Manufacturer.
version 2.050 created 2007/08/16
     Release for FontFolio 11... [actually a lot of bullets here!]
So can I assume FF11.1 will have Utopia 2.097? I can't really see anything in the above that looks like a user-visible change of significance...
On the other hand, FF11.1 upgrades seem to be extremely reasonably priced. List price of the upgrade is $29.95/seat (20-pack), so really that's chump-change. So I suppose I can't really go wrong. But it's hard to get excited about, especially when I already have Adobe Text and Hypatia Pro from giveaway incentives (though I guess having them in FF clarifies some potentially thorny licensing questions...)
Thanks!

Err, so I thought this would be an easy question...not so?

InDesign CC 2014 freezes on "What's New" window

Dear All,
InDesign CC 2014 is freezing up everything when it hangs on the "What's New" window which is completely a blank white. I can't close the application or force quit or do anything else…I have to shut down the computer in order to quit the application or do anything else on the computer -- it is completely frozen. When the computer restarts, InDesign CC 2014 automatically tries to start up again and freezes the computer unless I get to it before it launches and force quit before it gets a chance to freeze again.
InDesign CC is working normally, but I notice that when CC 2014 launches, it also launches InDesign CC with it and both seem to run at the same time. This does not happen when I start from InDesign CC -- only that application is then active.
"I'm also getting an Adobe warning that has begun to appear stating: "Administrator rights are required to complete Adobe add-ons installation or removal" and I'm not sure which application this is referring to or how to log in for these "rights",
Anyone else having these issues? I'm working on a Mac pro.
Small Town Gal

Sorry for not being clear. I did the fix in CC2014 and worked great.
El 06/30/2014, a las 8:40, Small Town Gal <[email protected]> escribió:
InDesign CC 2014 freezes on "What's New" window
created by Small Town Gal in InDesign - View the full discussion
Dear Alberto,
I'm not sure what vernon you're now running? Did the above fix work on the new InDesign 2014? or are you saying that InDesign CC is now working? The suggested "fix" says to open the InDesign CC folder, so I'm wondering if deleting the "What's New" folder from InDesign CC actually also removes it from InDesign 2014? and is a temporary fix for InDesign 2014, allowing it to finally launch? Thanks.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6509465#6509465
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Disable/remove What's new in 4.4.4

Similar Messages

Maybe you are looking for