Disable restart and state record in Application Engine
Hi All,
can any one explain me elaborately about disable restart check box in advanced properties of an ae program ? What s the relation for this check box with state record of types i.e sql table or derived work record
When you set the application engine to enable restart your state record needs to be a database record, so that the application eninge can continue where it left off with all values in the state record on that state.
When you set the application engine to disable restart your state record can be a work record, because the application engine will always restart from the beginning, not using any variables from the staterecord.
Similar Messages
-
Lumia 925 disabled mike and voice recording issues...
Dear Nokia Team
It has been a unpleasant experience dealing with the Nokia Care centre.
I have not got any solution for the complaint registered. Its been over 45 days now.
Inspite of escalating the matter several times i have not got any response
and solution from the concerned team. Its a horrible experience and i wouldnt recommend nokia to anyone henceforth.
The problem of Out going audio on loud speaker mode and voice recording has
been not functioning after 8.1 Update and this has been a common problem
with lot of 925 users. This problem has occurred due to some issues in the
mother board of the device.
And is within the scope of warranty terms and conditions.
As highlighted by several lumia 925 users, this is a common problem with this intrument.
The handset is under normal wear and tear conditions and still i have been
denied any service under warranty.
This is absolutely unprofessional attitude from the Nokia team.
Henceforth, i would be compelled to highlight this matter to social media
followed with legal complaint.
Its been a non satisfying and unhappy experience dealing with Nokia.
I would be escalating this matter.
Thanks for such a great service !!hi mate we are a user to user forum only so cannot assist you here. u need to persist with your Nokia Care location and if they are not being helpful, then escalate the issue to head office of Nokia in your region.
-
Hi. I'm in need of great help as I do not understand how this could have happened.
I had my firefox on, with multiple tabs and windows as I was doing intense research for a paper. My screen then freezes up, but my mouse could still work. Having experienced this before, I immediately pressed and hold the power button till my macbook pro shuts down.
After which, I switched it back on. To my horror, everything was resetted to factory settings: my desktop background was replaced, the fonts on the clock display were different. But this wasn't so bad.
After which, I realised that my dock went missing, together with the icons. I clicked the apple drop down menu, and my screen hanged momentarily, and in that moment everything on the screen disappeared (including the upper dock) for a few seconds and appear again. Meaning, i cant click the drop down.
Similar thing happened with my spotlight. Using the hot keys command-space, the dropdown appeared on the top right, but when i started to type, the screen disappeared and appeared again like before.
Finally i checked my applications folder, and it seems like all the applications are missing, like they have never been installed before! Their folders are there, but the icons and apllications themselves aren't. No applications/software installed- not even the utilities and system preference softwares that came with the macbook.
Luckily though, all my documents are safe. I just cant open them because my iworks and adobe are all missing and "not installed". I cant even access the internet. I'm doing this via my iPhone.
So basically i cant do anything because my apple drop down menu is unreachable, so is my spotlight, and my apps/softwares like system preference, utility are all missing. Is there a way i can troubleshoot this? Or make my macbook work again? I have already restarted and shutdown and switch it back on again near five times.
I know my explanation is long, but do help me if you can. I'm really at a lost right now...Hi
Thanks for the help. I did what you advised, but it still did not work.
The repair disk was successful. Unfortunately when the system restarted to boot my startup disk, I faced the exact same problems as I did previously. I also did a hardware test, but no problems were found.
Even tried powering off and on the macbook pro again but the same problems remained...
I tried to back-up my files too but they refuse to copy/move into my hard disk drive folder.
Nothing works.
Do you have other ideas? Or suggestions?
Thanks so far! -
With Ajay Kumar and Telmo Pereira
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about configuration and troubleshooting the Cisco Application Control Engine (ACE) load balancer with Cisco expert Ajay Kumar and Telmo Pereira. The Cisco ACE Application Control Engine Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is a next-generation load-balancing and application-delivery solution. A member of the Cisco family of Data Center 3.0 solutions, the module: Helps ensure business continuity by increasing application availability Improves business productivity by accelerating application and server performance Reduces data center power, space, and cooling needs through a virtualized architecture Helps lower operational costs associated with application provisioning and scaling
Ajay Kumar is a customer support engineer in the Cisco Technical Assistance Center in Brussels, covering content delivery network technologies including Cisco Application Control Engine, Cisco Wide Area Application Services, Cisco Content Switching Module, Cisco Content Services Switches, and others. He has been with Cisco for more than four years, working with major customers to help resolve their issues related to content products. He holds DCASI and VCP certifications.
Telmo Pereira is a customer support engineer in the Cisco Technical Assistance Center in Brussels, where he covers all Cisco content delivery network technologies including Cisco Application Control Engine (ACE), Cisco Wide Area Application Services (WAAS), and Digital Media Suite. He has worked with multiple customers around the globe, helping them solve interesting and often highly complex issues. Pereira has worked in the networking field for more than 7 years. He holds a computer science degree as well as multiple certifications including CCNP, DCASI, DCUCI, and VCP
Remember to use the rating system to let Ajay know if you have received an adequate response.
Ajay and Telmo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum Application Networking shortly after the event.
This event lasts through July 26, 2013. Visit this forum often to view responses to your questions and the questions of other community members.Hello Krzysztof,
Another set of good/interesting questions posted. Thanks!
I will try to clarify your doubts.
In the output below both resources (proxy-connections and ssl-connections rate) are configured with a min percentage of resources (column Min), while 'Max' is set to equal to the min.
ACE/Context# show resource usage
Allocation
Resource Current Peak Min Max Denied
-- outputs omitted for brevity --
proxy-connections 0 16358 16358 16358 17872
ssl-connections rate 0 626 626 626 23204
Most columns are self explanatory, 'Current' is current usage, 'Peak' is the maximum value reached, and the most important counter to monitor 'Denied' represents the amount of packets denied/dropped due to exceeding the configured limits.
On the resources themselves, Proxy-connections is simply the amount of proxied connections, in other words all connections handled at layer 7 (SSL connections are proxied, as are any connections with layer 7 load balance policies, or inspection).
So in this particular case for the proxy-connections we see that Peak is equal to the Max allocated, and as we have denies we can conclude that you have surpassed the limits for this resource. We see there were 17872 connections dropped due to that.
ssl-connections rate should be read in the same manner, however all values for this resource are in bytes/s, except for Denied counter, that is simply the amount of packets that were dropped due to exceeding this resource.
For your particular tests you have allocated a min percentage and set max equal to min, this way you make sure that this context will not use any other additional resources.
If you had set the max to unlimited during resource allocation, ACE would be allowed to use additional resources on top of those guaranteed, if those resources were available.
This might sound a great idea, but resource planning on ACE should be done carefully to avoid any sort of oversubscription, specially if you have business critical contexts.
We have a good reference for ACE resource planning that contains also description of all resources (this will help to understand the output better):
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/virtualization/guide/config.html#wp1008224
1) When a resource is utilized to its maximum limit, the ACE denies additional requests made by any context for that resource. In other words, the action is to Drop. ACE should in theory silently drop (No RST is sent back to the client). So unless we changed something on the code, this is what you should see.
To give more context, seeing resets with SSL connections is not necessarily synonym of drops. As it is usual to see them during normal transactions.
For instance Microsoft servers are usually ungracefully terminating SSL connections with RESET. Also when there is renegotiation during an SSL transaction you may see RESETS, but this will pass unnoticed for end users.
2) ACE will simply drop/ignore new connections when we reach the maximum amount of proxied connections for that context. Exisiting connections will continue there.
As ACE doesn't respond back, client would simply retransmit, and if he is lucky maybe in the next attempt he will be able to establish the connection.
To overcome the denies, you will definitely have to increase the resource allocation. This of course, assuming you are not reaching any physical limit of the box.
As mentioned setting max as unlimited might work for you, assuming there are a lot of unused resources on the box.
3) If a new connection comes in with a sticky value, that matches the sticky entry of a real server, which is already in MAXCONNS state, then both the ACE module/appliance should reject the connection and that sticky entry would be removed.
The client would at that point reestablish a new connection and ACE would associate a new sticky entry with the flow for a new RSERVER after the loadbalancing decision.
I hope this makes things clearer! Uff...
Regards,
Telmo -
My imac will not load after I enter my password. The only thing I get is the arrow from my mouse on top of a blank white screen. Can anyone tell me what this is? I've restarted and turned off several times. I left it on in this state for 8 hours hoping it would reload and work. No luck.
Hello KCC4ME,
You may try booting your Mac in Safe Boot, as it can resolve many issues that may prevent a successful login.
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/HT1564
If a Safe Boot allows you to successfully log in, you may have issues with one or more login itmes (while the following article is labelled as a Mavericks article, it is viable for earlier versions of the Mac OS, as well).
OS X Mavericks: If you think you have incompatible login items
http://support.apple.com/kb/PH14201
Cheers,
Allen -
Hi everyone!
I tried to update a few apps from my iPhone, and to install new applications from APPSTORE. But i got a message :" Your Apple ID has been disabled"!!!!!!
What can i do now? Can you help me please?
The same thing happend with my IPAD....
How can i do to function all this in the same way which was working till this problem appears.
I want to mention that i have 2 email adresses asociated with the same Apple ID.
wait for an feedback!
Thanks a lot!Depending on why it's been disabled you might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
Or you might need to contact Apple : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page
If it then works on your computer's iTunes but not your phone/iPad then try logging out of your account on the phone/iPad by tapping on your id in Settings > Store (Settings > iTunes & App Stores on iOS 6) and then log back in and see if that 'refreshes' the account on it -
XML Publisher and Application Engine in Peoplesoft
How do i write a simple application engine program for an XML Publisher report in Peoplesoft?
Thanks in advance.
Message was edited by:
user611481Create sample output data in xml format and create a data source type rowset.
create the report defination with above data source.
Create a AE and create the rowset by using peoplecode, run the xmlp report by using PeopleCode and publish it in PeopleCode. -
Creating new BAT file script to stop, restart and disable S I agent
We have just installed BOXI3 and are in the process of updating some bat files for stopping, restarting and failover (to our backup servers)and disable services on the Central Configuration Manager. In my old scripts we called each service Examples (
sc
servername.net config "bobjspcengine" start= disabled
sc
servername.net config "BOBJWebiServer" start= disabled)
I have a few questions
1. Server Intelligence Agent... Where would I find it's name like the BOBJWebiServer example?
2. If my bat file stops this agent does that automatically stop the CMS, Webi, Report services?
3. This is for our support team in order to easliy stop Tomcat and other services for failing over to our DR sites and backups since the script automatically stops, starts, restarts disables and enable services..., is this the best approach? We put these bat files out on the servers and all they do is click on them to start the failover process.Try using
Process Monitor for looking the key.
For example, you may set the required value through the group policy and see what windows registry keys are changed. -
Application Engine and Markets
Does anyone know how Application Engine chooses which market to execute?
On each section in an Application Engine program, the developer can choose to limit a section to a specific database platform or a specific market. PeopleBooks documents how it chooses which section to execute when multiple sections exist. Most of the time, I just leave the platform as default and the market as GBL, and I never have had to worry about it.
Understanding how the Application Engine chooses based on the database platform is easy: one of the options on the command-line tells it which platform to connect. But, what about the market? PeopleBooks does not document a command-line option that passes the market to psae.exe. I originally thought it would use the market from the run control component, but I don't understand how psae.exe knows. Does the market only apply to Application Engine programs run online and not through process scheduler?the log is :
PSAESRV.496 (84) [12/28/11 ](0) Exception Code=c0000005; access violation (the memory at 0x0209d000 could not be read)
PSAESRV.496 (84) [12/28/11 ](0) Fault address=77bd8fa7 0001:00037fa7 C:\WINDOWS\system32\MSVCRT.dll
PSAESRV.496 (84) [12/28/11 ](0)
PSAESRV.496 (84) [12/28/11 ](0) Windows Operating Environment:
PSAESRV.496 (84) [12/28/11 ](0) OS Version: Windows Server 2003 Standard Edition v5.2 (Build 3790: Service Pack 2)
PSAESRV.496 (84) [12/28/11 ](0) User Account: NT AUTHORITY\SYSTEM
PSAESRV.496 (84) [12/28/11 ](0) Desktop: WinSta0\Default
PSAESRV.496 (84) [12/28/11 ](0) OS Parms: %SystemRoot%\system32\csrss.exe ObjectDirectory=\Windows SharedSection=1024,3072,512 Windows=On SubSystemType=Windows ServerDll=basesrv,1 ServerDll=winsrv:UserServerDllInitialization,3 ServerDll=winsrv:ConServerDllInitialization,2 ProfileControl=Off MaxRequestThreads=16
PSAESRV.496 (84) [12/28/11 ](0) Memory status (MB available/MB total): Physical 2489/3711; PageFile 4690/5603; Virtual 1933/2047
PSAESRV.496 (84) [12/28/11 ](0) Current Service=RunAeAsync1; Return code=0; Ok=True
PSAESRV.496 (84) [12/28/11 ](0) ==================================================================================
PSAESRV.496 (84) [12/28/11 ](0) Assertion (!nSqlRecurse) Failed at e:\pt84504b-retail\peopletools\SRC\pssys\samlib.cpp, line 2012.
Thanks,
Balu -
Application Restart and Recovery APIs doesn't work for windows services
I am using the Application Restart and Recovery mechanism (provided in Windows API Code Pack for Microsoft.NET Framework) to collect some information (i.e. stack information when there's an unhandledexception) before my windows service crash down.
It works well for windows form applications, but the callback method wouldn't be called if the host is a windows service.
I have checked the article: https://msdn.microsoft.com/zh-cn/subscriptions/downloads/cc303708
But it doesn't specify clearly whether it works for a windows service. It seems that the recovery will only be activated when the user interacts with the error dialog of Windows Error Reporting (clicking "close" on the dialog, for example).
So I am wondering is my guess right that the Application Restart and Recovery mechanism doesn't work for windows services. Or is there a better way to meet my requirement?I would suggest trying ARR if that's what you want to use. The restart portion won't work, but it doesn't need to as if you fail out of your service, the Windows service controller will handle recovery (up to and including restarting your service).
You configure those recovery actions either through code or one of the built in administrative tools for services such as services.msc.
DebugDiag/ADplus and similar tools ultimately do use built-in APIs; you don't need to add anything external to collect debugging information. You do however have to write a good deal of code to do somethings. It's pretty simple to use the unmanaged
function that I pointed out before and
MiniDumpWriteDump to write a minidump when you hit an unexpected error(the dbghelp.dll that comes installed with Windows has it so you don't need anything additional installed). You can even write a basic debugger that literally debugs a process using
only kernel32 functions (see
https://msdn.microsoft.com/en-us/library/windows/desktop/ms679301(v=vs.85).aspx if you're interested).
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/ -
My Daughter forgot her passcode and disabled her ipod touch. When I do the restore settings on itunes. It starts out fine and then in the middle it disconnects the ipod and states that itunes can not connect due to passcode locked, enter passcode. Any help would be appreciated.?
iOS: Unable to update or restore
-
my ipod 5th gen crashed unexpectedly while i was using my facebook app and then i turned it off thinking it would restart and be alright but when i turned it on like ***?! some of the applications were gone and the setting and appstore and photos and camera are gone like everything that is on it already .. please help me
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
mac crashed and now upon restart I cannot launch any applications. When I try to, I just get the colorful pinwheel spinning, spinning, spinning...
Troubleshoot the spinning beach ball
-
Finder keep on restarting and asking for "restore to a previous state"
After finder crash on OSX Lion, it keep on restarting and asking whether I want to restore to a previous saved state. I have try to relaunch and force quit it, but it still keep on restarting, making the OS unusable. When i swith to other user account, the finder are usable, so how can I remedy this ?
+When I then try and open i-tunes it says that it can't read my library+
Use the directions from this article to find an itunes database that will work.
Surely one of the files in the *Previous iTunes Libraries* folder will work.
http://support.apple.com/kb/TS1967 -
Every time I restart my mac air some applications like calendar and Microsoft word automatically starts, how can I stop such applications from starting when ever I restart my mac?
One thing to check: when shutting down or restarting, there is a checkbox in the shutdown/restart dialog which asks whether you want currently open applications to open at startup.
charlie
Maybe you are looking for
-
I have Mail set up with three gmail-based email accounts. I have chronically had an issue with sending email from one address and having responses to that original email come in to the other gmail addresses. When I try to select which server to send
-
How to create documents on Mac that are compatible with Windows?
I have just started working in InDesign for a client who uses InDesign and wanted me to learn the program so that they could make changes on their own in the future to documents I create for them. I am working on a Mac OS 10.6.2 They have PCs and ar
-
Xcode error : invalid host string:'local host'
I am trying to run in command line tool the following code: #import <Foundation/Foundation.h> int main(int argc, const char * argv[]) @autoreleasepool { // insert code here... NSLog(@"Hello, World!"); return 0; and after "Build Succeed
-
How to stop the battery draining on iphone4 with ios7?
I updated to ios 7 last week and am now starting to have battery problems with it. I charged my phone this morning and by about 5:45pm my phone was completely dead. It was fully charged at 6am and was down to 60% by 10am without me even using it. I
-
Duplex Printing on 2605 in Windows 7
I have a 2605dn color laser jet. It handles duplex printing fine with XP computers but does not provide an option to select duplex prinitng with the Windows 7 computers. I have tried installeing the drivers that came with my PC (an HP) and also che