Disable SCCM Task Sequence Using WMI

Hello everyone,
So I'm attempting to use WMI/SDK to disable a task sequence. I've dug for a method to do it, but am not having any luck. I am aware of the Disable-CMTaskSequence Cmdlet, but I really wanting to find the WMI method, assuming one exists.
I've used the WMI Code Creator to browse the classes with methods and of the 99 available, I can't find any that seem to fit.
If anyone has any ideas where I might look, then that would be great. If not, I'll integrate PS into my solution, but I was hoping to keep everything to using .Net/SDK/WMI without any PS integration.
Thanks!

Hi,
I don't understand why you don't want to use the cmdlet?
I'm not a big fan of the native cmdlets either, but when they work, they do save you a lot of work going the WMI route.
If, for whatever reason, you really want to use WMI, then have a look at SMS_TaskSequencePackage. You have to then change the property ProgramFlags via a bitwise operation. In this case it's Bit 12.
Don't try to hardcode the value, that might work, but is a wrong way to go. Have a look at one of my previous articles where I show a similar thing on SMS_Program :
http://www.david-obrien.net/2014/01/24/convert-configmgr-applications-packages-powershell/
Hope that helps!
My blog on ConfigMgr automation: www.david-obrien.net | me on Twitter: @david_obrien Please remember to mark the post(s) that helped you resolve the issue (even if it was your own)

Similar Messages

Install CS6 Applications via SCCM Task Sequence

Hi
We have an SCCM 2012 R2 infrastructure on our network, and want to deploy Adobe CS6 applications using Windows Installer Packages created with Adobe Application Manager Enterprise Edition 3.1
We created individual packages for each application (for flexibility) following the instructions provided at this address: http://wwwimages.adobe.com/content/dam/Adobe/en/devnet/creativesuite/pdfs/AdobeApplication ManagerEnterpriseEditionDeploy…
When we go to install the packages via an SCCM Task Sequence, the following occurs:
1     The application is installed
2     The application is not installed
We have followed the instructions provided by Adobe for the deployment, and cannot get any consistency with the installers. For example, when we run the task sequence, the following applications will be installed:
1     Dreamweaver
2     Fireworks
3     Flash Professional
4     Illustrator
5     InDesign
6     Photoshop
When we run the same task sequence again, the following applications are installed:
1     Dreamweaver
2     Fireworks
3     Illustrator
4     Photoshop
The task sequence first images the computer with Windows 7, and reboots the computer between each application being installed
I have also attempted packaging all the applications together, in a Design and Web Premium style package, with the same, unfortunate results
Please, can you help with this?

The error means RPC server unavailable. TS needs to invoke Execution Manager by RPC. This may be caused by the issue of RPC starting. I suggest you check the RPC service availability first. Another try is to add a restart computer step before installing
SQL. If still no avail, add a Delay "cmd.exe /c timeout /t 900".
Regarding the connecting network share issue, seems the network services has not been initializing or ready. Another possibility is the DHCP time out. Check the Event log and this may give you some clues of why the network is not ready or DHCP cannot get
IP address. Network Monitor can also be used to monitor the IP helper when the Client try to send DHCP request after reboot.
Juke Chou
TechNet Community Support

Regkey Import via task sequence using command line. Running directly from DP.

I have a package that is going to run straight from the dp called JAVAHOME. Inside this package there is a regkey called JAVAHOME.REG
If I want to run it as part of a task sequence using a command line.
The run a command line step has use package called JAVAHOME checked.
Now to import it, in run a command line I use
cmd.exe /c reg.exe import javahome.reg
or
cmd.exe /c reg.exe import .\javahome.reg
I always get it wrong when running things directly from the DP.

To be sure about the behavior, I would use a batch file and use the %~dp0 variable. So, the command line in the batch file would be something like
reg.exe import %~dp0javahome.reg
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Deploy all software updates using SCCM task sequences

Hi, we are using System Center Configuration Manager 2012 R2 and I want to include software update installation part within the OSD.
So far I tried below links but not able to make it work:
https://technet.microsoft.com/en-in/library/bb632402.aspx
http://www.gerryhampsoncm.blogspot.ie/2013/04/sccm-2012-sp1-step-by-step-guide-part_5.html
http://dptechjournal.blogspot.in/2014/04/weekly-lab-patching-task-sequence.html
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b525aafc-b613-49a2-9015-3ae1c2db2e01/applying-software-updates-through-a-task-sequence
Can someone help me with this please?
~VST
~VST

Hi,
Please provide more information. If the task sequence failed to run, you need to check smsts.log and update logs on the client.
https://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Best Regards,
Joyce
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

SCCM Task Sequence no longer installs SCCM Client

I am using SCCM 2007 R3 with SP2 and MDT 2010
My task sequences were all working fine until one of the other SCCM admins "Synced all sites" by transferring the site settings of one site to all the other sites. How this broke OSD I don't know.
At this point the best I can tell is that the SCCM client is not being installed in the Task Sequence and so when it reboots to the installed OS there is no longer any communication and the task sequence fails with an error of "Windows could not configure
one or more system components. To install Windows, restart the computer and then restart the installation.
I have run out of ideas to fix it so I am asking for the collective knowledge of the Interwebs for help.

Please post the contents of C:\Windows\ccmsetup\logs\ccmsetup.log in order for us to help you further
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Powershell and SCCM Task Sequences

I previously posted this to the Powerwshell forum so hopefully cross posting isn't breaking any rules....
Does anyone know if there is any way to modify the sequence propery of an sms_tasksequencepackage object with Powershell? I am trying to migrate a task sequence from one site to another and want to programatically update the package IDs to match what
is on the destination site. I have everything down except the ability to actually write the value of the xml string to the sequence property.
When I connect to the wmi object directly, I can't even get the sequence property. It just comes back blank. When I use the get-cmtasksequence cmdlet, I can get the value, but I can't find any way to modify it and write it back. I have tried
using a combination of the two to get the sequence value with the cmdlet and then try to write it back to the wmi object, but that won't take either.
I have even tried running an export, extracting the zip, and modifying the xml from there to reimport, but there is some kind of psmdcp hash value that appears to be rejecting it when I try to reimport.
It seems like there must be some way unless Microsoft has just made the property read only via WMI and is using some proprietary hash value to prevent changing the task sequence between export and import. I'd love to hear anyone's input on this.

I am working on the route of exporting the zip, extracting the object.xml file, updating all the package references to point to the package ID on the destination site, re-zipping and then importing. It always ends up with a blank package object and
I have to go select the package manually. I have even re-exported the task sequence after I updated it with the correct package ID and compared to one I tried to import and the only differences seem to be related to the task sequence ID which should
be fine. I have updated both the object.xml and the referencesinfo.xml but I get the same results.
Here is an object.xml file that I generated and when I import it gives me a blank package.
<INSTANCE CLASSNAME="SMS_TaskSequencePackage">
<QUALIFIER NAME="dynamic" PROPAGATED="true" TYPE="boolean" TOSUBCLASS="false" TOINSTANCE="true">
<VALUE>TRUE</VALUE>
</QUALIFIER>
<QUALIFIER NAME="SecurityVerbs" TYPE="sint32" TOSUBCLASS="false">
<VALUE>-1</VALUE>
</QUALIFIER>
<PROPERTY NAME="__PATH" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>\\IODWAPP242\root\sms\site_DV0:SMS_TaskSequencePackage.PackageID="DV0003BE"</VALUE>
</PROPERTY>
<PROPERTY NAME="__NAMESPACE" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>root\sms\site_DV0</VALUE>
</PROPERTY>
<PROPERTY NAME="__SERVER" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>IODWAPP242</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="__DERIVATION" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE.ARRAY>
<VALUE>SMS_PackageBaseclass</VALUE>
<VALUE>SMS_BaseClass</VALUE>
</VALUE.ARRAY>
</PROPERTY.ARRAY>
<PROPERTY NAME="__PROPERTY_COUNT" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>57</VALUE>
</PROPERTY>
<PROPERTY NAME="__RELPATH" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequencePackage.PackageID="DV0003BE"</VALUE>
</PROPERTY>
<PROPERTY NAME="__DYNASTY" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_BaseClass</VALUE>
</PROPERTY>
<PROPERTY NAME="__SUPERCLASS" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_PackageBaseclass</VALUE>
</PROPERTY>
<PROPERTY NAME="__CLASS" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequencePackage</VALUE>
</PROPERTY>
<PROPERTY NAME="__GENUS" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY NAME="ActionInProgress" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="AlternateContentProviders" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="BootImageID" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Category" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="CustomProgressMsg" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="DependentProgram" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Description" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Duration" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>360</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="ExtendedData" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint8">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint8</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="ExtendedDataSize" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="ForcedDisconnectDelay" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>5</VALUE>
</PROPERTY>
<PROPERTY NAME="ForcedDisconnectEnabled" CLASSORIGIN="SMS_PackageBaseclass" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
<VALUE>FALSE</VALUE>
</PROPERTY>
<PROPERTY NAME="ForcedDisconnectNumRetries" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="Icon" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint8">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint8</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="IconSize" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="IgnoreAddressSchedule" CLASSORIGIN="SMS_PackageBaseclass" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
<VALUE>FALSE</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="ISVData" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint8">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint8</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="ISVDataSize" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="IsVersionCompatible" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY NAME="Language" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="LastRefreshTime" CLASSORIGIN="SMS_PackageBaseclass" TYPE="datetime">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>datetime</VALUE>
</QUALIFIER>
<VALUE>20150208163546.000000+000</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="LocalizedCategoryInstanceNames" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="Manufacturer" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFFilename" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFName" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFPublisher" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Name" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>test</VALUE>
</PROPERTY>
<PROPERTY NAME="NumOfPrograms" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY NAME="PackageID" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<QUALIFIER NAME="key" PROPAGATED="true" TYPE="boolean" OVERRIDABLE="false" TOINSTANCE="true">
<VALUE>TRUE</VALUE>
</QUALIFIER>
<VALUE>DV0003BE</VALUE>
</PROPERTY>
<PROPERTY NAME="PackageSize" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY NAME="PackageType" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>4</VALUE>
</PROPERTY>
<PROPERTY NAME="PkgFlags" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="PkgSourceFlag" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="PkgSourcePath" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="PreferredAddressType" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Priority" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY NAME="ProgramFlags" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>152084496</VALUE>
</PROPERTY>
<PROPERTY.OBJECTARRAY NAME="References" CLASSORIGIN="SMS_TaskSequencePackage" REFERENCECLASS="SMS_TaskSequence_Reference">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>object:SMS_TaskSequence_Reference</VALUE>
</QUALIFIER>
<VALUE.OBJECTARRAY>
<VALUE.OBJECT>
<INSTANCE CLASSNAME="SMS_TaskSequence_Reference">
<PROPERTY NAME="__PATH" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__NAMESPACE" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__SERVER" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY.ARRAY NAME="__DERIVATION" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE.ARRAY></VALUE.ARRAY>
</PROPERTY.ARRAY>
<PROPERTY NAME="__PROPERTY_COUNT" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>3</VALUE>
</PROPERTY>
<PROPERTY NAME="__RELPATH" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__DYNASTY" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequence_Reference</VALUE>
</PROPERTY>
<PROPERTY NAME="__SUPERCLASS" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__CLASS" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequence_Reference</VALUE>
</PROPERTY>
<PROPERTY NAME="__GENUS" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY NAME="Package" CLASSORIGIN="SMS_TaskSequence_Reference" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>DV000216</VALUE>
</PROPERTY>
<PROPERTY NAME="Program" CLASSORIGIN="SMS_TaskSequence_Reference" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>Adobe Reader Install</VALUE>
</PROPERTY>
<PROPERTY NAME="Type" CLASSORIGIN="SMS_TaskSequence_Reference" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
</INSTANCE>
</VALUE.OBJECT>
</VALUE.OBJECTARRAY>
</PROPERTY.OBJECTARRAY>
<PROPERTY NAME="ReferencesCount" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="RefreshPkgSourceFlag" CLASSORIGIN="SMS_PackageBaseclass" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
<VALUE>FALSE</VALUE>
</PROPERTY>
<PROPERTY.OBJECTARRAY NAME="RefreshSchedule" CLASSORIGIN="SMS_PackageBaseclass" REFERENCECLASS="SMS_ScheduleToken">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>object:SMS_ScheduleToken</VALUE>
</QUALIFIER>
</PROPERTY.OBJECTARRAY>
<PROPERTY NAME="Reserved" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY.ARRAY NAME="SecuredScopeNames" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE.ARRAY>
<VALUE>Default</VALUE>
</VALUE.ARRAY>
</PROPERTY.ARRAY>
<PROPERTY NAME="SedoObjectVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>2F190ADF-31AD-4FFC-94C1-8A2DECA2373B</VALUE>
</PROPERTY>
<PROPERTY NAME="Sequence" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE><![CDATA[<sequence version="3.00"><referenceList><reference package="DV000216" program="Adobe Reader Install"/></referenceList><step type="SMS_TaskSequence_SetVariableAction" name="Set Task Sequence Variable" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>tsenv.exe "bleh=bleh"</action><defaultVarList><variable name="VariableName" property="VariableName" hidden="true">bleh</variable><variable name="VariableValue" property="VariableValue" hidden="true">bleh</variable></defaultVarList></step><step type="SMS_TaskSequence_InstallSoftwareAction" name="Install Package" description="" runIn="FullOS" successCodeList="0" runFromNet="false"><action>smsswd.exe /pkg:DV000216 /install /basevar: /continueOnError:</action><defaultVarList><variable name="PackageID" property="PackageID" hidden="true">DV000216</variable><variable name="_SMSSWDProgramName" property="ProgramName">Adobe Reader Install</variable></defaultVarList></step></sequence>
]]></VALUE>
</PROPERTY>
<PROPERTY NAME="ShareName" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="ShareType" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="SourceDate" CLASSORIGIN="SMS_PackageBaseclass" TYPE="datetime">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>datetime</VALUE>
</QUALIFIER>
<VALUE>20150208010121.000000+000</VALUE>
</PROPERTY>
<PROPERTY NAME="SourceSite" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>DV0</VALUE>
</PROPERTY>
<PROPERTY NAME="SourceVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="StoredPkgPath" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="StoredPkgVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY.OBJECTARRAY NAME="SupportedOperatingSystems" CLASSORIGIN="SMS_TaskSequencePackage" REFERENCECLASS="SMS_OS_Details">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>object:SMS_OS_Details</VALUE>
</QUALIFIER>
<VALUE.OBJECTARRAY></VALUE.OBJECTARRAY>
</PROPERTY.OBJECTARRAY>
<PROPERTY NAME="TaskSequenceFlags" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="Type" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="Version" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
</INSTANCE>
Here is the exported object.xml from the destination site after I manually updated the package and it reimported successfully.
<INSTANCE CLASSNAME="SMS_TaskSequencePackage">
<QUALIFIER NAME="dynamic" PROPAGATED="true" TYPE="boolean" TOSUBCLASS="false" TOINSTANCE="true">
<VALUE>TRUE</VALUE>
</QUALIFIER>
<QUALIFIER NAME="SecurityVerbs" TYPE="sint32" TOSUBCLASS="false">
<VALUE>-1</VALUE>
</QUALIFIER>
<PROPERTY NAME="__PATH" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>\\IODWAPP242\root\sms\site_DV0:SMS_TaskSequencePackage.PackageID="DV0003B2"</VALUE>
</PROPERTY>
<PROPERTY NAME="__NAMESPACE" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>root\sms\site_DV0</VALUE>
</PROPERTY>
<PROPERTY NAME="__SERVER" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>IODWAPP242</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="__DERIVATION" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE.ARRAY>
<VALUE>SMS_PackageBaseclass</VALUE>
<VALUE>SMS_BaseClass</VALUE>
</VALUE.ARRAY>
</PROPERTY.ARRAY>
<PROPERTY NAME="__PROPERTY_COUNT" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>57</VALUE>
</PROPERTY>
<PROPERTY NAME="__RELPATH" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequencePackage.PackageID="DV0003B2"</VALUE>
</PROPERTY>
<PROPERTY NAME="__DYNASTY" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_BaseClass</VALUE>
</PROPERTY>
<PROPERTY NAME="__SUPERCLASS" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_PackageBaseclass</VALUE>
</PROPERTY>
<PROPERTY NAME="__CLASS" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequencePackage</VALUE>
</PROPERTY>
<PROPERTY NAME="__GENUS" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY NAME="ActionInProgress" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="AlternateContentProviders" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="BootImageID" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Category" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="CustomProgressMsg" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="DependentProgram" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Description" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Duration" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>360</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="ExtendedData" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint8">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint8</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="ExtendedDataSize" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="ForcedDisconnectDelay" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>5</VALUE>
</PROPERTY>
<PROPERTY NAME="ForcedDisconnectEnabled" CLASSORIGIN="SMS_PackageBaseclass" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
<VALUE>FALSE</VALUE>
</PROPERTY>
<PROPERTY NAME="ForcedDisconnectNumRetries" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="Icon" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint8">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint8</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="IconSize" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="IgnoreAddressSchedule" CLASSORIGIN="SMS_PackageBaseclass" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
<VALUE>FALSE</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="ISVData" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint8">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint8</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="ISVDataSize" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="IsVersionCompatible" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY NAME="Language" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="LastRefreshTime" CLASSORIGIN="SMS_PackageBaseclass" TYPE="datetime">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>datetime</VALUE>
</QUALIFIER>
<VALUE>20150208165428.000000+000</VALUE>
</PROPERTY>
<PROPERTY.ARRAY NAME="LocalizedCategoryInstanceNames" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
</PROPERTY.ARRAY>
<PROPERTY NAME="Manufacturer" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFFilename" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFName" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFPublisher" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="MIFVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Name" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>test</VALUE>
</PROPERTY>
<PROPERTY NAME="NumOfPrograms" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY NAME="PackageID" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<QUALIFIER NAME="key" PROPAGATED="true" TYPE="boolean" OVERRIDABLE="false" TOINSTANCE="true">
<VALUE>TRUE</VALUE>
</QUALIFIER>
<VALUE>DV0003B2</VALUE>
</PROPERTY>
<PROPERTY NAME="PackageSize" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY NAME="PackageType" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>4</VALUE>
</PROPERTY>
<PROPERTY NAME="PkgFlags" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="PkgSourceFlag" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="PkgSourcePath" CLASSORIGIN="SMS_PackageBaseclass" PROPAGATED="true" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="PreferredAddressType" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="Priority" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY NAME="ProgramFlags" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>152084496</VALUE>
</PROPERTY>
<PROPERTY.OBJECTARRAY NAME="References" CLASSORIGIN="SMS_TaskSequencePackage" REFERENCECLASS="SMS_TaskSequence_Reference">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>object:SMS_TaskSequence_Reference</VALUE>
</QUALIFIER>
<VALUE.OBJECTARRAY>
<VALUE.OBJECT>
<INSTANCE CLASSNAME="SMS_TaskSequence_Reference">
<PROPERTY NAME="__PATH" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__NAMESPACE" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__SERVER" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY.ARRAY NAME="__DERIVATION" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE.ARRAY></VALUE.ARRAY>
</PROPERTY.ARRAY>
<PROPERTY NAME="__PROPERTY_COUNT" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>3</VALUE>
</PROPERTY>
<PROPERTY NAME="__RELPATH" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__DYNASTY" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequence_Reference</VALUE>
</PROPERTY>
<PROPERTY NAME="__SUPERCLASS" CLASSORIGIN="___SYSTEM" TYPE="string"></PROPERTY>
<PROPERTY NAME="__CLASS" CLASSORIGIN="___SYSTEM" TYPE="string">
<VALUE>SMS_TaskSequence_Reference</VALUE>
</PROPERTY>
<PROPERTY NAME="__GENUS" CLASSORIGIN="___SYSTEM" TYPE="sint32">
<VALUE>2</VALUE>
</PROPERTY>
<PROPERTY NAME="Package" CLASSORIGIN="SMS_TaskSequence_Reference" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>DV000216</VALUE>
</PROPERTY>
<PROPERTY NAME="Program" CLASSORIGIN="SMS_TaskSequence_Reference" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>Adobe Reader Install</VALUE>
</PROPERTY>
<PROPERTY NAME="Type" CLASSORIGIN="SMS_TaskSequence_Reference" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
</INSTANCE>
</VALUE.OBJECT>
</VALUE.OBJECTARRAY>
</PROPERTY.OBJECTARRAY>
<PROPERTY NAME="ReferencesCount" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="RefreshPkgSourceFlag" CLASSORIGIN="SMS_PackageBaseclass" TYPE="boolean">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>boolean</VALUE>
</QUALIFIER>
<VALUE>FALSE</VALUE>
</PROPERTY>
<PROPERTY.OBJECTARRAY NAME="RefreshSchedule" CLASSORIGIN="SMS_PackageBaseclass" REFERENCECLASS="SMS_ScheduleToken">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>object:SMS_ScheduleToken</VALUE>
</QUALIFIER>
</PROPERTY.OBJECTARRAY>
<PROPERTY NAME="Reserved" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
</PROPERTY>
<PROPERTY.ARRAY NAME="SecuredScopeNames" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE.ARRAY>
<VALUE>Default</VALUE>
</VALUE.ARRAY>
</PROPERTY.ARRAY>
<PROPERTY NAME="SedoObjectVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>EB3AFD91-21C9-4762-AEF8-A5DB6F96C83D</VALUE>
</PROPERTY>
<PROPERTY NAME="Sequence" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE><![CDATA[<sequence version="3.00"><referenceList><reference package="DV000216" program="Adobe Reader Install"/></referenceList><step type="SMS_TaskSequence_SetVariableAction" name="Set Task Sequence Variable" description="" runIn="WinPEandFullOS" successCodeList="0" runFromNet="false"><action>tsenv.exe "bleh=bleh"</action><defaultVarList><variable name="VariableName" property="VariableName" hidden="true">bleh</variable><variable name="VariableValue" property="VariableValue" hidden="true">bleh</variable></defaultVarList></step><step type="SMS_TaskSequence_InstallSoftwareAction" name="Install Package" description="" runIn="FullOS" successCodeList="0" runFromNet="false"><action>smsswd.exe /pkg:DV000216 /install /basevar: /continueOnError:</action><defaultVarList><variable name="PackageID" property="PackageID" hidden="true">DV000216</variable><variable name="_SMSSWDProgramName" property="ProgramName">Adobe Reader Install</variable></defaultVarList></step></sequence>
]]></VALUE>
</PROPERTY>
<PROPERTY NAME="ShareName" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="ShareType" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="SourceDate" CLASSORIGIN="SMS_PackageBaseclass" TYPE="datetime">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>datetime</VALUE>
</QUALIFIER>
<VALUE>20150208165139.000000+000</VALUE>
</PROPERTY>
<PROPERTY NAME="SourceSite" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE>DV0</VALUE>
</PROPERTY>
<PROPERTY NAME="SourceVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="StoredPkgPath" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
<PROPERTY NAME="StoredPkgVersion" CLASSORIGIN="SMS_PackageBaseclass" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY.OBJECTARRAY NAME="SupportedOperatingSystems" CLASSORIGIN="SMS_TaskSequencePackage" REFERENCECLASS="SMS_OS_Details">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>object:SMS_OS_Details</VALUE>
</QUALIFIER>
<VALUE.OBJECTARRAY></VALUE.OBJECTARRAY>
</PROPERTY.OBJECTARRAY>
<PROPERTY NAME="TaskSequenceFlags" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>0</VALUE>
</PROPERTY>
<PROPERTY NAME="Type" CLASSORIGIN="SMS_TaskSequencePackage" TYPE="uint32">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>uint32</VALUE>
</QUALIFIER>
<VALUE>1</VALUE>
</PROPERTY>
<PROPERTY NAME="Version" CLASSORIGIN="SMS_PackageBaseclass" TYPE="string">
<QUALIFIER NAME="CIMTYPE" PROPAGATED="true" TYPE="string" TOINSTANCE="true">
<VALUE>string</VALUE>
</QUALIFIER>
<VALUE></VALUE>
</PROPERTY>
</INSTANCE>
Is there some other file in play? I don't see anything in these that would suggest a problem.

SCCM Task Sequence Fail to Connect Share Folder on SCCM server

those days we have an task sequence issue- can't connect to share folder on the SCCM server
Enviroment
in our network, we have DHCP server, DC server, DNS server. we are trying to bring up an new server to boot from the SCCM server. we have two VLAN in our environment. VLAN 54 and VLAN 200.
the DHCP/DC/SCCM/DNS are all running on VLAN200
Issue
we have those steps in this task sequence
Installing OS
setup windows and configuration manager
connect to an share folder to SCCM(run some sicrpts)
run the scripts
install the sqlserver
1. when the VM running on VLAN 200, no issue on all the task list, we can access the share folder on SCCM server.
and task sequence run ran success.
2. but when VM running on VLAN 54, issue came. when the task sequence run into the [Setup Operation System]/[Connect to network folder]. this step can't get the share folder to sccm server.
then the task sequcne was quit, so we logined to vm have a look. run the ipconfig/all. no IP address get from DHCP server.
but when we run the command ipconfig/renew on this VM, then we can get the IP address from DHCP server.
we have tried an alternative solution like below.
add an step ipconfig/renew before connect to share folder, then the task sequence can connect to share folder, but when the task run into last step- install the SQL from package.
unfortunately, we came cross another issue.
Failed to invoke Execution Manager to Install Software for PackageID='GDL00008' ProgramID='Install SQL 2005 Standard SP4' AdvertID='GDL2001F' hr=0x800706ba InstallSoftware 12/10/2013 11:48:17 PM 1012 (0x03F4)
InstallSoftware failed, hr=0x800706ba InstallSoftware 12/10/2013 11:48:17 PM 1012 (0x03F4)
Quetions
so we suspect there may something to do with network, but the network team said there is no issue on their side. so what i can go to research, how can i fiind the root cause or how to confirm it is an network issue. do you guys have any idea on this issue?

The error means RPC server unavailable. TS needs to invoke Execution Manager by RPC. This may be caused by the issue of RPC starting. I suggest you check the RPC service availability first. Another try is to add a restart computer step before installing
SQL. If still no avail, add a Delay "cmd.exe /c timeout /t 900".
Regarding the connecting network share issue, seems the network services has not been initializing or ready. Another possibility is the DHCP time out. Check the Event log and this may give you some clues of why the network is not ready or DHCP cannot get
IP address. Network Monitor can also be used to monitor the IP helper when the Client try to send DHCP request after reboot.
Juke Chou
TechNet Community Support

Question about Disable Step Task Sequence

Hello guys,
I have 2 doubt about my scenario, I hope you help me.
Scenario1
I want deploy SO Windows7, I have only one partition.
If a disable step: Apply data image1 my deploy ocurred with sucess.
But if no disable step I saw up, ocurred error 0X8004005.
My question so: Why is
mandatorily I
disable this step?
Print1 Partition Disk0
Print2 Apply Data Image
Thanks any idea.

It seems the answer has been staring us in the face this whole time.
In the above image you posted previously, you are clearly applying an image that, from the title, contains an OS despite the warning below the selection box stating that this image
can not contain any operating system.
The apply operating system task sequence step is for applying any WIMs involved with OS or boot partitions. The apply image step should only be used if you had data partitions that you wanted all machines to have, for instance raw storage sections with company
specific data on it. I have never seen it used but I can imagine where it would come in handy.
I would recommend replacing all of those steps with the appropriate task sequence step.
I also recommend you stop using hardware specific WIMs, as it seems you are using based on the title
WIN7HP8200... above. You should be able to go fairly hardware independent with the WIM and only apply drivers to the Task SEquence based on hardware detected.
Dustin Estes - MCP | www.dustinestes.com

Sccm Task Sequence Error Code 0x80070570

I have been using sccm succesfully for a while now and have recently re-imaged 150 existing machine and all have work, with the exception of one that start to resolve the task sequence then drops out with the error code 0x80070570, I can not check the smsts.log as it have not been created by this point on the local hard drive and have been unable to find this error code on the internet, does anyone know what this error code means.

I know that this is an old post but I had a similar issue using a boot media to run a Task Sequence in ConfigMgr 2012 SP1 environment and I wasn't able to find a proper answer on that one.
So here it is:
The computer I was trying to image was shutdown using the good old holding the power button thing.
The drive was marked as dirty and had to run a checkdisk on reboot.
Once the checkdisk was done, the Task Sequence was able to start without any problem.
So the answer is, let the OS restart or run a checkdisk.
Mathieu

Is it possible to disable Mandatory Task Sequence Warning Message ?

Hello,
When I deploy a mandatory OSD task sequence, the client pc's receives the request, however, a "Mandatory Task Sequence" messages appears saying that the OS deployment will commence in 180 seconds.
Is there an option to disable this warning or reduce the timeout value of 180 seconds ?
Thanks
Imran
Imran

Hi,
The following thread might be helpful, although it is for SCCM 2007.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/da7b304b-457e-4fff-bcb9-d40ceb0675ec/configuration-manager-mandatory-task-sequence-warning?forum=configmgrosd
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error installing MBAM client through SCCM task sequence error code 80070005

Hi
I'm getting a weird error when trying to deploy the MBAM 2.0 client through a task sequence, it was working but now keep seeing the below two errors in the AppEnforce log, after it has returned the 3010 soft reboot code.
CoCreateInstance failed on CLSID_ProductSrcUpdateMgr, error 80070005
Failed to update msi source list, error 0x80070005
does anyone have any idea what these mean?
thanks
Mark

What is the silent installation command line for MBAM client you are using. I would suggest to first test the silent installation manually and test whether it is working successfully or not.
Are you using the msi installer or the setup.exe
Command Line for Deploying the MBAM 2.0 Client
MBAMClientSetup.exe /q
Gaurav Ranjan

SCCM Task sequence OSD issue with windows recovery

Hi,
Just wanted to know if anyone else gets a strange issue I have sometimes during my W7 deployment. We have deployed approx. 1500 PCs using this task sequence with no problems but about 5 or so PCs get stuck after different stages and windows start automatic
repair and tries to fix an issue which fails and sticks at the recovery screen.
If you cancel the auto repair the TS continues no issue but this usually happens at our remote sites that are a days drive away. I have just had it happen on a new PC we just got that I am testing the driver pack with and just wanted to know if
anyone else has this issue?
I have a script I run out to all my PCs after SOE is applied to prevent this as we have found our users are not good a clean shutdowns and this prevents auto repair after the fact but I am thinking I might push this script after applying the image to prevent
this from happening again.
The script I use is as follows.
cmd.exe /c "%windir%\system32\bcdedit.exe" /set {default} bootstatuspolicy ignoreallfailures >c:\tempsccm\bcdedit.log
If anyone can let me know if this happens to you that would be great.
Cheers.

You PC need to be recovered error may come in below cases.
1. MAC id is wrong while importing the asset in CM.
2. BIOS date and time is improper.
3. Disk failure
4. WDS is not functional.
Regards, Shishir Kushawaha "If this thread answered your question, please click on "Mark as Answer"

Disable a Task Sequence step

If you disable a step will it still check for the package content during an image drop?

The answer is no. It won't.
Test it yourself. Choose a task sequence and look at the References tab below. These are the objects required by the task sequence and must be available on a DP. Now disable a step containing a package. See that the package disappears from the References
tab. It is no longer required content.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM Task Sequence And Program Behavior

Are task sequences subject to the actions you set for the program, such as normal, hidden, restart after running, etc? I know they show the task sequence progress bar, but will the program run hidden all the time with just that bar visible?

Jason,
I was testing a task sequence that runs a program. The program by itself does not invoke a restart as it is a simple echo hello world. I set the program action as Configuration Manager Restarts Computer. I was expecting a notification in the tray and 90
minute delay for restart but it restarted right away. Here is the execmgr.log and it restarted despite the line - requires a reboot, however reboot is supressed. Removing request. The exit code was success and 0.
Execution is complete for program Wake On Lan Test Script. The exit code is 0, the execution status is SuccessRebootRequired execmgr 1/6/2015 2:29:47 PM 5132 (0x140C)
Requesting MTC to delete task with id: {8C840D94-E508-4030-86E2-160F11ACB6B2} execmgr 1/6/2015 2:29:47 PM 5132 (0x140C)
This execution request does not own the corresponding task in MTC, returning without deleting it from MTC. execmgr 1/6/2015 2:29:47 PM 5132 (0x140C)
Execution Request for advert CPS20194 package CPS0004B program Wake On Lan Test Script state change from Running to ReportStatusAtReboot execmgr 1/6/2015 2:29:47 PM 5132 (0x140C)
The program Wake On Lan Test Script for package CPS0004B and advertisement CPS20194 completed succesfully and it
requires a reboot, however reboot is supressed. Removing request. execmgr 1/6/2015 2:29:47 PM 5132 (0x140C)
Program exited expecting reboot, delaying execution of other programs for 60000 ms execmgr 1/6/2015 2:29:47 PM 5132 (0x140C)
When I remove the Configuration Manger Restarts Computer, it doesn't restart and exits with code 0. So it seems the TS does honor the setting in the program to restart but does it immediately and not through the normal client process with the notification
and countdown. Reason I ask is because I am trying to run a TS and present the user afterward with the temporary notification of 90 minutes to restart.
Of course when I tried this with a different application it exited with a 3010 code and if I'm correct that tells the TS engine to restart right away anyway.

Running Vbscript from MDT integrated SCCM Task sequence

Hi All,
we have got MDT integrated SCCM 2007 R3 environment where I am unable to execute moveou.vbs from %scriptroot% folder. The task finishes without any error though computer object is unable to move.
steps what I followed:
placed MoveOU.vbs into MDT toolkit package (ref :- http://blog.coretech.dk/jgs/vbscript-move-computer-object-to-another-ou-via-command-line-parameter/)
added ST task "run command line" after "use toolkit package"
At the time of OSD, script is exist in "_SMSTaskSequence\WDpackage\Scripts".
I know for many of you this will be really easy but as being a newbie I am struggling for quite a sometime now.
Thanks in-advance.

Have you reviewed smsts.log to verify that the task is completing successfully?
There's no need to prefix it with cmd.exe either, cscript is an executable that you can run just fine outside of the command-shell. Also, is there a specific reason that you disabling 64-bit redirection?
Jason | http://blog.configmgrftw.com

Disable SCCM Task Sequence Using WMI

Similar Messages

Maybe you are looking for