Disable sleep on HP LaserJet 400 color M451dn

Hello.I have this printer set up as a network printer, connected directly to the network.I already know that this printer doesn't allow ACL. Bummer.Now I have another problem with sleep mode. It's constantly in sleep mode and it takes one minute for it to wake up and print any document. I've installed the latest firmware (date: 20150126), still it doesn't allow to disable the sleep mode, unlike it is shown on the manual. The best option seems to be setting the  delay sleep mode for one hour, but this isn't good enough for my users.Any ideas, please?Regards. 

As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

Similar Messages

  • HP LaserJet 400 color M451dn - help connecting wirelessly

    Hello,
    I am having the hardest time connecting my HP LaserJet wirelessly.  I bought it to be able to print wirelessy, but I cannot get it connected.  Does anyone have any suggestions?  It seems like this should be something very simple...
    Thank you,
    Ben

    As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

  • HP LaserJet 400 color M451dw asking password to login

    Hello,
    I purchased HP LaserJet 400 color M451 dw. after two months all the menu of this device disabled and it is asking password to login. i have in a big trouble. can anyone please help me how to reset this. i attached you the print screen. Thanks:

    As far as I'm aware, the LaserJet Pro 400 colour printer M451dn model does not support wireless connections; you'd need the M451dw model for that.

  • HP LaserJet 400 Color MFP M475dw Problems in OS 10.9.4

    I'm using a 2013 MacBook Pro, 2.4 GHz Intel Core i7, 9 GB 1600 MHz DDR3.  I connect via wifi to the referenced printer (for almost a year now).  Since updating to OS 10.9.4 I am able to print only one document at a time.  Attempting to print a second document generates the message "Printer is not connected."  If I turn the printer off and back on again, I'm able to print one document.  Then the same thing occurs again.  I have done the following so far, all to no avail:
    Downloaded and installed latest driver (specifically for Mavericks) from HP
    Checked for Apple software updates and found none
    Reset the printing system (per instructions elsewhere in these forums)
    I updated to OS 10.9.4 on July 5th and that is when this problem started.  Where do I go from here???

    And BTW, here's a repost of what I posted on July 7th:
    I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd).  For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection.  A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S.  I discovered there was an updated printer driver on HP's website, specifically for OS 10.9.  Downloaded and installed it, and the problem was seemingly solved.
    Then I updated the OS to 10.9.4.  AARRRRGH!!!!!!  For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected.  I turn the printer off and back on, get one print job, then have to repeat the process.  Here are all the things I've tried to resolve the issue:
    Verified settings on the printer to make sure everything is set up properly
    Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification:  I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
    Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
    Searched help/support forums on Apple, HP, and the internet in general
    Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8).  I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
    All of these efforts have been to no avail.  The problem persists, and I'm at my wit's end how to solve it.  HELP, please..........anyone??????

  • HP LaserJet 400 color M451nw

    Dear support,
    The firmware link for HP LaserJet 400 color M451nw is not working.
    May you please fix it, thanks.
    regards,
    Frank

    There is no option to change what tray ePrint prints from.  
    For now, it will only print from tray 1.  
    However, you could load paper into tray 1 since it is currently left empty and change the default in the printer settings to tray 2 so that all print jobs (except for ePrint) will bypass tray 1.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Hoping for repsonse from HP, re: Laserjet 400 Color MFP M475dw can not locate wifi network

    Greetings! 
    MY HP Laserjet Pro 400 Color MFP M475dw (9 months old) no longer finds any wireless network in my home. It worked fine then stopped for no reason I can determine. Nor will it print via USB cable direct from my PC.  I opened a case with HP on 9/1/14 for this issue (Case [Edited for Personal Information]) but have only received emails from HP asking for a valid phone number and the address of the printer location, all of which has been provided several times. The first email from HP gave me a phone number to contact HP but that number was missing a digit (1-890-946-500). Please help! This printer is the only color printer I have to use for my home-based small business. Thank you! Wendy [Edited for Personal Information]

    Hello @windypoo ,
    I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Windows 7 32 bit with no support for HP Laserjet Pro 400 color M451dn help.

    I live in a mac / PC house, I have to admit that the apple movement is growing here.
    My problem Is getting my small little PC netbook Windows 7 32 bit to be able to print to my new HP Laserjet Pro 400 M451dn printer which is plugged into my 2 TB Time Capsul.
    I have been successfull connecting the mac computer, and my old Windows XP computer and they work perfectly.
    Everything is connected throught an etheir net corded network in the house.
    I used Bonjour to connect the Windows XP computer and it worked like a charm.
    When I used Bonjour to connect with my Windows 7 computer the pinter HP Laserjet Pro 400 M451dn is not listed.  I have a disk with the drivers that came with the printer  but it is a setup disk which is not able to provide the necessary drivers.
    If any one has some suggestions I am open to give them a try.  I have a portable CD / DVD player burner that I can hook to the net book as it does not have a CD drive.
    Thanks

    Okay, so I'm feeling slightly stupid right now.  I decided I would shut the printer down for about an hour to see if that was it and what do you know- it was!  I had shut it off a few times before but I guess it just wasn't long enough.  What a pain!  
    Thank you to anyone who took the time to read this!  Sorry to waste anyone's time!!

  • HP LaserJet Pro 400 color M451dn Printing Color Streaks: HELP!

    We recently replaced the ink cartridges in our printer, but now, it's printing color streaks on our paper. The weird thing is, it only does this for 4 pages every 4 pages. 4 pages will be okay, then we'll get cyan, magenta, yellow, and black horizontal stripes on the next 4 pages. We think it's because we replaced the Laserjet cartridges with a generic toner. Is there any way to fix this???

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP laserjet Pro 400 color Printing Delay after 2 pages

    i have HP laserjet pro 400 color m451dn printer . which have printing delay problem. it prints 2 pages and then delay for 5 to 10 second, then it again print 2 pages and so on. anyone can help me urgently.

    To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
    I hope this helps!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Cannot print to HP LaserJet 400 colorMFP M475dw after updating OS

    I'm running a 2013 Macbook Pro, 2.4 GHz Intel Core i7, 8 GB 1600 MHz DDR3, OS version 10.9.4 (updated to this OS version 5 days ago, on July 2nd).  For a little less than a year I've been printing to a HP LaserJet 400 Color MFP M475dw via wireless connection.  A few weeks ago I began to have numerous "printer is not connected" events, and it reached the point I could not print anything - from my MacBook, my iPad Air, or my iPhone 5S.  I discovered there was an updated printer driver on HP's website, specifically for OS 10.9.  Downloaded and installed it, and the problem was seemingly solved.
    Then I updated the OS to 10.9.4.  AARRRRGH!!!!!!  For the last 5 days, the printer will - sometimes - print the first document in a queue of 2 or more and then, while the printer is still "running," tell me the printer is not connected.  I turn the printer off and back on, get one print job, then have to repeat the process.  Here are all the things I've tried to resolve the issue:
    Verified settings on the printer to make sure everything is set up properly
    Restarted Airport Extreme, printer, and MacBook (multiple times) -- clarification:  I turned off both the MacBook and the printer, then unplugged Airport for a few minutes, replugged it, restarted the printer, then restarted the MacBook
    Reset the printing system (as suggested elsewhere in the Support forums), which basically removes all printers from the MacBook, then lets you add back those that you want - presumably with the most current driver(s).
    Searched help/support forums on Apple, HP, and the internet in general
    Found a firmware update for the printer on HP's website -- but it is not compatible with OS 10.9 (only goes up through 10.8).  I downloaded it and tried, even though 10.9 was not listed, and the "app" wouldn't even open.
    All of these efforts have been to no avail.  The problem persists, and I'm at my wit's end how to solve it.  HELP, please..........anyone??????

    I also wanted to know if a HP M575f MFP is able to scan-to-email to MS Office 365 before buying the printer.
    Because I didnt find reliable information in the internet, I contacted HP Germany.
    Today they told me that HP printers don't support Office 365. The original wording was:
    'Allerdings wird Office 365 nicht von unseren HP Druckern unterstützt.'
     So far my present knowledge.

  • Laserjet 400 can't print envelopes ...

    All-
    We purchesed a LaserJet 400 Color (M451) nw printer last year, and printing regular documents works fine. However, we have a lot of problems printing "non-letter" documents such envelopes, 3x5 cards, and other items. We are not trying to load different trays with different paper products -- we just want to manally feed single items using Tray 1 and have them print as directed.
    The main issue is that the printer gives up before it even starts. If we create an envelope in something like Microsoft Word, and then press print, the printer automatially comes back with a "Jam in Tray 2" message before it even attempts to feed paper of any kind. Once we clear the message, it tries again, and usually prints a blank page from the normal letter-paper tray, completely ignoring our envelope sitting in the manually feed tray. The only way we have found to print these items, is to (1) open all paper trays and remove their contents, (2) re-insert all empty paper trays, and (3) manually feed the desired paper iteam (e.g. envelope) through Tray 1, and then it will work. 
    I miss our old HP printers that used to just work out of the box. (Sigh)
    Welcome comments.
    Seattle Expat

    Have same issue. HP salesman said put several envelopes in to raise the paper pile up higher so when it trys to grab the envelope it is easier to access. Also, don't forget to set the selection on your PC to the same size envelope that you are using. It won't print a #9 envelope if your selection is set on #10.
    Alternative: Fool the printer! Open Windows WORD to a blank document page. Go to 'mailings' (envelopes) - click on ADD TO DOCUMENT - -- it will give you an envelope on the screen above the blank page.  Type your address onto the envelope -  
    be sure to place your paper envelope into the printer tray and lay a blank piece of paper on top.
    When you click PRINT  -  The printer will grab the paper and pull it through as if you were printing a letter and the envelope will follow automatically.  Tah Tah!!!!   You have a printed envelope.   

  • Hp LaserJet 400 M451 replaced cartridges​, but they still read "low"

    I have an HP LaserJet 400 color M451nw
    When the cyan cartridge said it was low, I replaced it.  It then printed another 100 pages or so, without problems, then the printer told me the magenta was low , and I replaced it.  It printed a few more sheets, told me the yellow was low, I replaced it.
    Now, although 3 cartridges have been replaced, it tells me the cyan cartridge is empty, the magenta cartridge is at 20%, and the yellow cartridge is at 70%  (all 3 of these cartridges are brand new HP catridges)
    Now, it will not print at all, and insists the cyan cartridge is very low.
    I have inspected all of the cartridges, was sure they were seated correctly, and I have reset the printer several times.
    I cannot get the printer to "see" I have plenty of toner.

    [Disclaimer - I have little experience or expertise in printers that use the 02 ink cartridges.]  That said the issue sounds like one that would be caused by air in the plumbing.  There is a long thread here, reading through has a few reported successes from reseting the printer.  I would suggest reading and trying the steps in these posts:
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/td-p/4101#m85... by longtimemacuser
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/td-p/4101#m17... by GRO
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/m-p/257743#M1... by sjwoolf
    http://h30434.www3.hp.com/t5/Other-printing-questions/Ink-cartridge-empty-but-it-s-not/m-p/564581#M3... by sparky2011
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • HP LaserJet Pro 400 color Printer M451dn won't print

    My HP LaserJet Pro 400 color Printer M451dn stopped printing after a short usage of non hp toner. How do I get this printer to accept these toner cartridge ? My 3600dn never has a problem

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

  • Disable wireless broadcasting - HP laserjet pro 400 color mfp m475dw

    How do I disable SSID broadcasting for HP laserjet pro 400 color mfp m475dw.  I have turned off wireless configuration through printer web console, but it is still broadcasting.  I have also updated the firmware to latest available 20131028.
    This question was solved.
    View Solution.

    The information is in the manual.  Did you download it and read it?
    Go here.
    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/manualsResults/?sp4ts.oid=433754...
    Page 28 Network options.  Disable Wireless Direct.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HP Laserjet Pro 400 color printer M451dn Driver needed

    I need to install an HP Laserjet Pro 400 color printer.  When I plug in the USB - it provides a driver which I can open and get to the install process -  The process takes me to the point of plugging in the USB and starts to install.
    After 10 minutes and getting to 99% complete the install stops because it is taking to long.
    I have searched for the driver on the web site but when I click on the printer name - the HP web site goes into an
    Internet Explorer cannot display the webpage
    Need help with installing this printer - this printer is only available to me by USB

    If you are using non-HP toner cartridges, then I would say that the onus is on the supplier of these to resolve the problem.
    Or to accept that these cartridges aren't quite as compatible as they've no doubt been advertised to be.

Maybe you are looking for