Disable spaces

I need to know how to completely disable space in a number of Mac OS X operating systems.  For testing purposes I must install a secure browser.  At this time as I install the browser and attmept to run a sample test with the browser using mavericks, I keep getting an error to completely dsable spaces.  I have attempted all the tricks that I know to disable spaces.  The error will not go away and I cannot run the sample tests.
Ideas,
Thanks in advance
Don

Not much we can do about this, then.
Tell the state folks their tool is broken, or doesn't support current OS X.   That should send the state folks back to the provider that wrote the tool for them.
I'd probably leave off the part about the whole concept probably being broken, though.
If you want to have a little fun here, suggest they allow the use of one of the Tor bundles.  Boot that from USB or such.  Or slightly more seriously, suggest that — for the purposes of the test — that they allow you to boot and run a locked-down Linux distro that meets the state requirements.
I have not tried the following to disable Mission Control on Mavericks, and will assume you already have tried this and whatever else has been posted around the 'net:
defaults write com.apple.dock mcx-expose-disabled -bool TRUE
killall Dock
To revert:
defaults write com.apple.dock mcx-expose-disabled
killall Dock

Similar Messages

  • Possible to go full-screen without "Spaces"? To disable "Spaces"?

    I never found Leopard's "Spaces" feature to be intuitive or useful. I specifically dislike that it doesn't work with the command-tab application switching and the command-h application hiding functionalities that I've used heavily since Jaguar.
    In the move from Snow Leopard to Mountain Lion, I discovered the new in-OS full-screen functionality seems to create a new "Space," to my disappointment. Now in Mavericks, more web-delivered videos are being diverted down the Mac OS Spaces route (such as Vimeo and Viddler).
    Is there a way (such as through Terminal) to circumvent the "Spacing" of full-screen modes, perhaps by disabling Spaces altogether?
    Thank you.

    iDVD is an authorihng application for createing video DVDs to play on set top DVD player on TV.  DVD Player is an application for playing video DVDs, either commercial or home made on your Mac.
    Happy Holidays

  • How to disable spaces entirely in Mountain Lion?

    Hi there,
    I just upgraded to mountain lion from snow leopard – I do not use or like using Spaces, and I've turned off all possible options in "mission control" but I still find that moutain lion is separating my firefox windows and other app windows to different spaces and it's driving me bonkers. I have never needed Spaces, I find just simple Expose to be the perfect solution, no matter how many windows I have running – how can I just completely disable Spaces in Mountain Lion?
    Any insight is greatly appreciated!

    I ran into a problem where sliding my cursor over to the RHS and hesitating "too long" there caused the Desktop to shift Right and reveal the 2nd Desktop that was hiding over there. I don't recall actually creating such a Desktop in the past - but this situation was outrageously annoying because I keep my Dock on the RHS, and apparently while hesitating trying to find a specific item in the Dock, Mountain Lion thought I meant to take it to the 2nd Desktop. This was Unexpected Behavior.
    Similar to _daniel_, I have two large monitors (27" iMac and 27" external) and so Spaces/Multiple Desktops is really not necessary for me now. Even when I had only one monitor, it was a little challenging to use. I understand the concept, and I think it can be useful - I vaguely recall making use of it when all I had was a 20" iMac screen and wanted multiple apps open at the same time. Right now though, it's usefulness is pretty minimal.
    While there is no way to "turn Spaces off", I resolved my issue with the help of silvergc's comment, launching Mission Control and clicking the X in the upper left corner of the 2nd Desktop. No more Desktop-Space-switching for me.
    Thanks to silvergc and _daniel_!

  • How to disable spaces on 10.8

    Anyone know how to disable spaces on MacAir 10.8.5?

    >As a point of interest, do people think that to have a server "pingable", involves a security risk?
    Not at all. Please explain why you think it is a risk
    IMHO, it makes no difference to the security of your site or server.
    What does it tell a remote user? oooh - there's a server at IP address x.y.z.a!!
    Big deal. If it's a public server you generally want people to know your server is there.
    Conversely, disabling ping makes troubleshooting network problems a lot harder. If your site drops offline for any reason the first tool 99.9% of network admin will try is ping. So now, is that lack of ping reply a sign that your machine really is dead, or your ICMP block actually working?
    Finally if you're running a public site you are behind some kind of firewall, right? You're not running your server with it's proverbial *** hanging out in the wind, and therefore the firewall would be the appropriate place to put such controls (especially if you're in a NATted network).

  • Disabling Spaces & Expose on 2nd Monitor

    Does anyone know if there is a way to disable spaces and expose on a 2nd monitor? I want the 2nd screen to run a keynote presentation and not be affected by my activities on the first screen.
    Thanks,
    Pete

    Having played around with the two monitor configuration for a few days now, I realized that what I really need is a way to make them run independent of each other, essentially running the second monitor as a separate tv monitor for movies and slide shows. So far I haven't found a way to do this.
    Also, whenever I play a Keynote presentation, it takes over both screens in one way or another and Apple didn't seem to have any idea of a way to change this. Is there a different way I could connect them that might make them more independent of each other?
    PC

  • How do I disable "Spaces" in Mavericks?

    I am trying to run the SBAC Secure Browser 6.3 on an iMac configured with Mac OS X v. 10.9.1.
    I am getting a message stating, "Your computer has "Spaces" enabled. This feature must be disabled before you can log in."
    I have not been able to find a way to diable "Spaces".

    Found it!
    System preferences> Keyboard> Shortcuts> make sure Mission Control options are turned off.
    I turned them all off to be safe.
    Once I did this SBAC allowed me to log in as guest.

  • Disable Spaces animation?

    I'm relatively new to MacOS. I just started using Spaces the other day and I find it very useful for organizing my desktop. However, the animated sliding from one virtual screen to another makes me dizzy (I'm serious). I'm doing some development and have a bunch of editor windows in one "space" and XCode in another, so I'm often switching back and forth quite a bit. It's much more efficient than having all the windows on one desktop, but after doing that for a while, my head is spinning. Is there a way to disable that animation?

    Sorry to reply without helpful advice. I google this question almost weekly and don't believe there's a work-around yet. I just want to second your request. This is my #1 feature request for 10.5. Power users like the eye candy as much as everyone else -- except for when is slows us down. I have 8 spaces mapped to keyboard shortcuts (using Fastscripts) so I don't even have to leave to home row to select a specific space. The animation provides no useful information if one knows exactly where one is going before even making the selection. It only slows things down and distracts. This may seem trivial, but some of us switch spaces perhaps 100 times or more per day. Workspace management is one of the few places where Gnome and KDE beat the OSX gui, IMHO.

  • Disable Spaces for second monitor

    Hi there,
    I wonder if it's possible to deactivat Spaces for my second monitor, because I primarily use it for my chat applications, so I don't have to switch back and forth.
    Thanks in advance

    I'm really surprised not more people are talking about this. Apple? You have a solution? Cause right now Spaces is un-usable. I use it on a machine at work and LOVE it! I only need 4 spaces, but with the dual monitor all of the sudden i have 8 spaces of different sizes and it *****.
    by the way, that last word that i can't believe apple blanked out is " s-u-c-k-s"
    Message was edited by: redstyles

  • Spaces : Disable on the second screen

    Hello,
    I would like to knwo how to disable spaces on my second moniteur, can you please help me ?
    Or if not possible, how to setup a different spaces for the second moniteur ?
    Thanks a lot
    zak

    zakharitch wrote:
    Hello,
    I would like to knwo how to disable spaces on my second moniteur, can you please help me ?
    not possible. the best you can do is assign all apps that you regularly keep on the second monitor to all spaces at once.
    Or if not possible, how to setup a different spaces for the second moniteur ?
    not sure what you mean by this. the second monitor is an extension of the first. that's how it will appear in every space and you can't change that.
    Thanks a lot
    zak

  • Spaces Still On, Though Disabled in Preferences

    So I set up Spaces where for instance Safari is in every space, Mail/AddressBook/iCal are in space 2, etc... I then decided to turn spaces off. Even after the 10.5.1 update (this happens in 10.5 too) I can move within the spaces I set up via the keyboard shortcuts, plus the apps I assigned are still linked though Enable Spaces in the Spaces preference pane is unchecked.
    Is this the correct behavior? At first I was confused after logging back in and launching Mail, seeing that it was open in the menu bar, but the app was no where to be seen. Shouldn't the bindings be ignored if Spaces is disabled?

    Is anyone able to reproduce this, if it is in-fact a bug?
    1) Enable Spaces
    2) Assign apps
    3) Disable Spaces
    4) Attempt to navigate through and launch apps that reside in those spaces

  • Spaces freezes when changing w/ hotkeys?

    When I use Ctrl+ arrow keys to shift spaces the small window showing which space you're moving to freezes in place and my keyboard stops working except to switch spaces. This can only be fixed by opening System Preferences and disabling spaces. Logging out, restarting etc. has no effect on this.
    Any ideas?

    Micah D,
    This is a question from another thread, but that one is locked.
    What is the chance of getting you to email me some pictures of your iMac modification (i.e., drilled holes to release the heat), as I am about to replace my video card on my late 2006 iMac and would like to do the same sort of thing. I'm a firm advocate of not reinventing the wheel unless need be.
    Thanks,
    Dean
    [email protected]

  • Unable to switch spaces

    Recently, I can't seem to switch Spaces at all despite the fact that it is turned on.
    I currently have Spaces turned on, with a few applications set to open in a particular space. For example, I have Finder and the Mail application to open up in space 1, and the web browser (Camino) to open up in space 2, etc.
    After logging in, the default space is "1", which is normal. However, from there it will not allow me to switch spaces at all.
    None of the following works:
    1) Pressing the Control key and the arrow keys
    2) Pressing the Control key and a number (1 through 4)
    3) Choosing a space from the menu bar
    4) Opening an application that will open in another space besides 1 (such as Camino, in my case)
    Of those options above, 1-3 just won't do anything. However, opening Camino does open the application (the Menu Bar displays "Camino" and it's menu bar items such as Bookmarks) but the browser window doesn't show up, nor can I manually open one from the File Menu.
    The only way to make spaces work at this point is to press F8 (show all Spaces) repeatedly, until all the spaces show up on screen. Once I do this, I can switch Spaces normally.
    I'm quite sure that this is an odd and unusual problem, as I don't see any information regarding such behavior.
    Help appreciated!
    Yoshihide

    I gave that a try and all other accounts have Spaces working correctly.
    The main differences between the other accounts and my account is that I have a few menu bar items, and startup items installed. So I disabled one of the startup items, "Dashboard KickStart" and all works fine now!
    I did a search on the web and yes, Dashboard KickStart does seem to disable Spaces. I suppose I'll have to manually start Dashboard every time I login.
    Thanks!
    Yoshihide

  • Spaces Keyboard Shortcut

    Hi all,
    This past week I upgraded to 10.5.2 and started playing with Spaces. I set up the Command+Arrows to switch between the different Spaces I created, but then I realized that this was also the keyboard shortcut to move the cursor to the end of a line of text in a word processor or Mail or whatever.
    I got back into the preferences and changed the keyboard back to Control + Arrow to switch between Spaces, thinking that I'd get my keyboard "go to the end of the line" shortcut back, but that didn't happen. So now I have no keyboard shortcut to quickly navigate to the end of a line of text.
    Is there anyone out there that knows how to get me back to square-one on this?
    Thanks in advance,
    Scott

    I tried replicating what you did, changing the Spaces to Command+Arrow, moving around Spaces a few times using the new key combination, and then changing back to Control+Arrow. But I couldn’t replicate what is happening to you - my Command+Arrow went back to moving me to the end of the line or beginning of the line in MS Word and Mail.
    A couple of things you might try. Go into Spaces and uncheck Enable Spaces. See if your Command+Arrow works properly. If not, try going back into Spaces, re-enable Spaces and remove all your applications from their Spaces and again disabling Spaces. Then see if your Command+Arrow to move to the end returns.

  • Disable editable field in ALV grid using OOPS

    I have following requirements,
    Displaying ALV grid output with most of the fields editable.
    Validations on data entered for each fields,for error messages
    Query :
    I want to make all the fields except the field in ERROR in display only mode
    similar to case when we do validation of fields in table controls.

    HI
    check the below links lot of info and examples r there for OOPS
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.geocities.com/victorav15/sapr3/abap_ood.html
    http://www.brabandt.de/html/abap_oo.html
    Check this cool weblog:
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    these links
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    For funtion module to class
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
    for classes
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    for methods
    http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
    for inheritance
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
    for interfaces
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
    For Materials:
    1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
    2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
    6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
    7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
    8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
    1) http://www.erpgenie.com/sap/abap/OO/index.htm
    2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    Check these sample code
    data : begin of it_mara occurs 0,
    mark type flag,
    matnr type matnr,
    mtart type mtart,
    meins type meins,
    end of it_mara.
    data : begin of it_mara1 occurs 0,
    mark type flag,
    matnr type matnr,
    mtart type mtart,
    meins type meins,
    end of it_mara1.
    data : begin of it_mara2 occurs 0,
    mark type flag,
    matnr type matnr,
    mtart type mtart,
    meins type meins,
    end of it_mara2.
    data : t_fieldcat type lvc_t_fcat,
    t_fieldcat1 type lvc_t_fcat,
    s_fieldcat like line of t_fieldcat.
    data : s_layout type lvc_s_layo.
    data : control type ref to cl_gui_custom_container,
    grid type ref to cl_gui_alv_grid.
    data: begin of wa ,
    mark type flag,
    matnr type matnr,
    mtart type mtart,
    meins type meins,
    end of wa.
    class lcl_events_box definition.
    public section.
    methods :
    *Handler_Data_Changed for event Data_Changed of cl_gui_alv_grid
    *imporTing er_data_changed,
    Handler_User_Command for event User_Command of cl_gui_alv_grid
    imporTing e_ucomm,
    Handler_ToolBar for event ToolBar of cl_gui_alv_grid
    importing E_object E_interactive.
    endclass.
    class lcl_events_box implementation.
    method Handler_user_command.
    PERFORM FORM_USERCOMMAND CHANGING E_UCOMM.
    endmethod.
    method Handler_ToolBar.
    PERFORM FORM_TOOLBAR CHANGING E_OBJECT E_INTERACTIVE
    E_OBJECT->MT_TOOLBAR.
    endmethod.
    ENDCLASS.
    start-of-selection.
    data : w_events type ref to lcl_events_box.
    select matnr mtart meins from mara into corresponding fields of table
    it_mara.
    call screen 100.
    *& Module pbo_module OUTPUT
    text
    MODULE pbo_module OUTPUT.
    if GRID is initial.
    CREATE OBJECT CONTROL
    EXPORTING
    CONTAINER_NAME = 'CUST_CTRL'.
    CREATE OBJECT GRID
    EXPORTING
    I_PARENT = CONTROL.
    PERFORM BUILD_CATALOG.
    PERFORM BUILD_CATALOG1.
    PERFORM BUILD_LAYOUT.
    CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
    IS_LAYOUT = s_layout
    CHANGING
    IT_OUTTAB = it_mara[]
    IT_FIELDCATALOG = t_fieldcat.
    CREATE OBJECT W_EVENTS.
    SET HANDLER : W_EVENTS->HANDLER_TOOLBAR FOR GRID,
    W_EVENTS->HANDLER_USER_COMMAND FOR GRID.
    CALL METHOD GRID->SET_TOOLBAR_INTERACTIVE.
    ELSE.
    call method grid->refresh_table_display.
    ENDIF.
    ENDMODULE. " pbo_module OUTPUT
    *& Form BUILD_CATALOG
    FORM BUILD_CATALOG .
    S_FIELDCAT-COL_POS = '1'.
    S_FIELDCAT-FIELDNAME = 'MARK'.
    S_FIELDCAT-CHECKBOX = 'X'.
    S_FIELDCAT-eDIT = 'X'.
    APPEND S_FIELDCAT TO T_FIELDCAT.
    CLEAR S_FIELDCAT.
    S_FIELDCAT-COL_POS = '2'.
    S_FIELDCAT-FIELDNAME = 'MATNR'.
    S_FIELDCAT-SCRTEXT_M = 'MATERIAL'.
    APPEND S_FIELDCAT TO T_FIELDCAT.
    S_FIELDCAT-COL_POS = '3'.
    S_FIELDCAT-FIELDNAME = 'MTART'.
    S_FIELDCAT-SCRTEXT_M = 'MATERL TYPE'.
    APPEND S_FIELDCAT TO T_FIELDCAT.
    S_FIELDCAT-COL_POS = '4'.
    S_FIELDCAT-FIELDNAME = 'MEINS'.
    S_FIELDCAT-SCRTEXT_M = 'UOM'.
    APPEND S_FIELDCAT TO T_FIELDCAT.
    ENDFORM. " BUILD_CATALOG
    *& Form BUILD_LAYOUT
    text
    --> p1 text
    <-- p2 text
    FORM BUILD_LAYOUT .
    S_LAYOUT-ZEBRA = 'X'.
    S_LAYOUT-CWIDTH_OPT = 'X'.
    S_LAYOUT-GRID_TITLE = 'Material Details'.
    ENDFORM.
    " BUILD_LAYOUT////////////////////////////////////
    " USER_COMMAND_0100 INPUT
    *& Form FORM_USERCOMMAND
    text
    <--P_E_UCOMM text
    form FORM_USERCOMMAND changing p_e_ucomm.
    CASE P_E_UCOMM.
    WHEN 'INT1'.
    DO.
    READ TABLE IT_MARA INDEX SY-INDEX TRANSPORTING MARK MATNR.
    IF SY-SUBRC <> 0.
    EXIT.
    ENDIF.
    IF IT_MARA-MARK = 'X'.
    read table it_mara into wa TRANSPORTING MATNR MTART MEINS .
    MOVE-CORRESPONDING WA TO IT_MARA1.
    READ TABLE IT_MARA1 TRANSPORTING MATNR MTART MEINS .
    MOVE-CORRESPONDING IT_MARA1 TO IT_MARA2.
    APPEND IT_MARA2.
    CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
    IS_LAYOUT = s_layout
    CHANGING
    IT_OUTTAB = it_mara2[]
    IT_FIELDCATALOG = t_fieldcat1.
    SET PARAMETER ID 'MAT' FIELD IT_MARA-MATNR.
    CALL TRANSACTION 'MM02'.
    . ENDIF.
    ENDIF.
    ENDDO.
    ENDCASE.
    endform. " FORM_USERCOMMAND
    *& Form FORM_TOOLBAR
    text
    <--P_E_OBJECT text
    <--P_E_INTERACTIVE text
    <--P_E_OBJECT_>MT_TOOLBAR text
    FORM FORM_TOOLBAR CHANGING P_E_OBJECT TYPE REF TO
    CL_ALV_EVENT_TOOLBAR_SET
    P_E_INTERACTIVE
    MT_TOOLBAR TYPE TTB_BUTTON.
    DATA WAL_BUTTON TYPE STB_BUTTON.
    *WAL_BUTTON-ICON = ICON_status_reverse.
    WAL_BUTTON-TEXT = 'GO'.
    WAL_BUTTON-QUICKINFO = 'PROCEED'.
    waL_button-FUNCTION = 'INT1'.
    WAL_BUTTON-BUTN_TYPE = 0.
    WAL_BUTTON-DISABLED = SPACE.
    insert WAL_BUTTON INTO P_E_OBJECT->MT_TOOLBAR index 1.
    endform. " FORM_TOOLBAR
    *& Module PF-STATUS OUTPUT
    text
    module PF-STATUS output.
    set pf-status 'Z7PSTAT'.
    endmodule. " PF-STATUS OUTPUT
    *& Module USER_COMMAND_0100 INPUT
    text
    module USER_COMMAND_0100 input.
    CASE SY-UCOMM.
    WHEN 'BACK'.
    LEAVE PROGRAM.
    WHEN 'CANCEL'.
    LEAVE PROGRAM.
    ENDCASE.
    endmodule. " USER_COMMAND_0100 INPUT
    *& Form BUILD_CATALOG1
    text
    --> p1 text
    <-- p2 text
    form BUILD_CATALOG1 .
    S_FIELDCAT-COL_POS = '1'.
    S_FIELDCAT-FIELDNAME = 'MATNR'.
    S_FIELDCAT-SCRTEXT_M = 'MATERIAL'.
    APPEND S_FIELDCAT TO T_FIELDCAT1.
    S_FIELDCAT-COL_POS = '2'.
    S_FIELDCAT-FIELDNAME = 'MTART'.
    S_FIELDCAT-SCRTEXT_M = 'MATERL TYPE'.
    APPEND S_FIELDCAT TO T_FIELDCAT1.
    S_FIELDCAT-COL_POS = '3'.
    S_FIELDCAT-FIELDNAME = 'MEINS'.
    S_FIELDCAT-SCRTEXT_M = 'UOM'.
    APPEND S_FIELDCAT TO T_FIELDCAT1.
    endform. " BUILD_CATALOG1
    check the below link may be useful for you
    http://www.sapdevelopment.co.uk/reporting/alvhome.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    Go thru these programs they may help u to try on some hands on
    ALV Demo program
    BCALV_DEMO_HTML
    BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
    BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
    BCALV_GRID_DEMO Simple ALV Control Call Demo Program
    BCALV_TREE_DEMO Demo for ALV tree control
    BCALV_TREE_SIMPLE_DEMO
    BC_ALV_DEMO_HTML_D0100
    <b>Reward all helpfull answers</b>
    Regards

  • Spaces 13-16 keyboard shortcut

    I moved from 12 to 16 Spaces, and for spaces 11-12 the control-option-1 and 2 work to jump to spaces 11 and 12, but when I try to go to spaces 13-16 (control-option-3, etc.) nothing happens. I tried rebooting but that didn't fix it. Does anyone know if I might have a setting wrong in the system preference for Spaces, or if there is a different keyboard sequence, or a conflict with something else such that I can get to the top 4 spaces (13-16) using a keyboard sequence. I can use the control+arrow keys to jump up from space 12, or use the overview function key to see the grid and click or use the pull down menu, and they work, I've just gotten faster at jumping using the keyboard numbers, and would like to get to spaces 13-16 that way as well.

    I tried replicating what you did, changing the Spaces to Command+Arrow, moving around Spaces a few times using the new key combination, and then changing back to Control+Arrow. But I couldn’t replicate what is happening to you - my Command+Arrow went back to moving me to the end of the line or beginning of the line in MS Word and Mail.
    A couple of things you might try. Go into Spaces and uncheck Enable Spaces. See if your Command+Arrow works properly. If not, try going back into Spaces, re-enable Spaces and remove all your applications from their Spaces and again disabling Spaces. Then see if your Command+Arrow to move to the end returns.

Maybe you are looking for