Disable/suppress the TPM ownership restart
Using MBAM 2.5 (w/ the KB2975636 hotfix).
As the MBAM client is installed on new computers as part of the provisioning process, it is displaying the "Restart Required" dialog box to complete taking ownership of the TPM. Screenshot below:
I understand the reasoning for this and that this is fully expected behavior.
My issue/question is the following: as this prompt can appear during the installation of other software and/or patches, if the user were to click the "Restart now" it could cause other issues (bad or incomplete software installatoins, for example).
As the machine reboots numerous times as part of the provisioning process, is there a way to suppress this particular prompt to avoid this issue from occurring, and instead let the TPM ownership process complete during a scheduled reboot?
thanks!
Hello,
Unfortunately it's depend on how the manufacturer implement the TPM, the reboot belong of this.
As far as I know if the manufacturer if you meet this behavior you can't avoid it instead of changing the manufacturer of your computer ;).
Regards,
Follow me on Twitter http://www.twitter.com/liontux | My Blog (French/English) :
http://security.sakuranohana.fr/
Similar Messages
-
I got stuck with the Yahoo tab that opens Yahoo every time you open a new tab . I looked online for a way to get rid of it and in the process told the computer to restart Firefox in safe mode. Here I chose to permanently disable add on s and then I clicked the apply and restart button. Since then I can't download the new version of flash because Firefox sees it as and add on. Any Idea on how I can get this to work with out having the Yahoo tab back?
See:
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can enable individual extensions on the Tools > Add-ons > Extensions page. -
I resets my iphone without disabling touch ID lock, it restarts, apple logo appears, and it stays like that, it never starts till now, just the apple logo and stays that way, please give a solution???
Hi ahmedsgh,
I'm sorry to hear you are having issues with your iPhone. If it isn't responding or starting up past the Apple logo screen, you may find the troubleshooting steps outlined in the following article helpful, in particular this portion:
If your device gets stuck during startup
When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
Make sure that you have iTunes 12 or later on your computer.
Put your device in recovery mode.
When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden -
OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as
OBIEE Report Export from Dashboard to Excel doesn't suppress the columns as expected even after the properties are set to Suppress in the report. In Dashboard it is suppressed Properly but in the excel export it is not suppressed and values for the columns are repeated.
Added the following to the instanceconfig :
<Download>
<Export xsi:type="excel">
<DataValue>UseFormattedValue</DataValue>
<RepeatRows>false</RepeatRows>
</Export>
</Download>
But then could not restart services.The following error occured :
Util Logger] Exception occurred:
Severity:1
Type:PKN3saw9ExceptionE
File:saxreader.cpp
Line:681
Message:Sax parser returned an exception.
Message: The prefix 'xsi' has not been mapped to any URI, Entity publicId: /oracle/ofm/instances/instance1/config/OracleBIPresentationServicesComponent/coreapplication_obips1/instanceconfig.xml, Entity systemId: , Line number: 43, Column number: 26
Edited by: 887111 on Mar 27, 2013 11:23 PMProblem solved!!
<br><br>
See this part of the query:
<br><br>
if :P15_GESTOR_PROPIETARI='-3' then<br>
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';<br>
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';<br>
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=<FONT color=red>:P15_CANVI_DE_CLUB</FONT> ';
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';<br>
end if;<br>
<br>
when instead of :P15_CANVI_DE_CLUB I put a value (say ''EE'') it works correctly, finally I created an application item (ASSOCIAT) and when when I change :P15_CANVI_DE_CLUB I set :ASSOCIAT to the same value and the query is based on this application item:
<br><br>
if :P15_GESTOR_PROPIETARI='-3' then<br>
w:= w||' AND (("STASVWREPORT_TASQUES"."GES_GES_ID"=:GESTOR ';<br>
w:= w||'OR "STASVWREPORT_TASQUES"."GES_GES_ID_ESTA_ASSIGNADA"=:GESTOR)';<br>
w:= w||'OR ("STASVWREPORT_TASQUES"."AGR_***_***_ID"=<FONT color=red>:ASSOCIAT </FONT>';<br>
w:= w||' AND "STASVWREPORT_TASQUES"."PUBLICA"=''S''))';<br>
end if;<br>
<br> -
How to suppress the Acknowledgement Error in IDOC to File scenario?
Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
TirumalHi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy -
ArchLinux causes the router to restart
Hello!
I don't know what exactly, but something causes the router to disconnects and restarts. And dhcpcd fails after reboot.
I'm having this problem since some iso releases. Like 5 or 6 months ago.
Well, I download the ISO, I dd it to a memory stick, and boot a PC with it. Everything goes fine, I do whatever I want. But after a while the router loses Internet connection and it does not accept any device to connect. Then, I reboot the PC, and dhcpcd@<whatever>fails. It doesn't matter if it's a wireless or wired connection. To get a connection, I restart the router (turn it off and on). But the router continuously restarts itself if I continue using the ArchLinux machines.
(To get the router working again, I disconnect any ArchLinux running machine and restart the router)
Because of that I thought it was the router, but I tried with other router (at another place) with my laptop, and I got the same result. The router restarts and everything. So I thought It was my laptop. I tried with another computer (a desktop) and I got the same result. Then I said "Maybe it's the memory stick", so I tried with other one... the same result. To be sure of that, I used other distro (LMDE) on those PC's with the same memory stick and different routers. Everything worked fine.
I've searched this issue on the forum and the Bug Tracker, but I don't find this exact problem. Or maybe I didn't get it because of my English. If this post is duplicated, or it's submitted on the bug tracker, I apologize and will be thankful for someone to redirects me. If is not, here are the PCs' specs and command outputs: (all using 2014.02.01 installation media)
If other command output (or output filtering) is necesary, please let me know.
Laptop:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
03:00.0 Ethernet controller: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) (rev 01)
dmesg before reboot
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201402 initrd=boot/x86_64/archiso.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077b6bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077bbf000-0x0000000077c85fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077c86000-0x0000000077cbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077cbf000-0x0000000077cebfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077cec000-0x0000000077cfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077cff000-0x0000000077cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077d00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA Satellite L305/Portable PC, BIOS 2.20 12/09/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x77d00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-CFFFF uncachable
[ 0.000000] D0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 078000000 mask FF8000000 uncachable
[ 0.000000] 4 base 077E00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 077D00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x76600000-0x767fffff]
[ 0.000000] [mem 0x76600000-0x767fffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x74000000-0x765fffff]
[ 0.000000] [mem 0x74000000-0x765fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x73ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x73ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x76800000-0x77b6bfff]
[ 0.000000] [mem 0x76800000-0x779fffff] page 2M
[ 0.000000] [mem 0x77a00000-0x77b6bfff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x77bbf000-0x77c85fff]
[ 0.000000] [mem 0x77bbf000-0x77c85fff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x77cbf000-0x77cebfff]
[ 0.000000] [mem 0x77cbf000-0x77cebfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x77cff000-0x77cfffff]
[ 0.000000] [mem 0x77cff000-0x77cfffff] page 4k
[ 0.000000] RAMDISK: [mem 0x768ab000-0x77b6bfff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 TOSINV)
[ 0.000000] ACPI: XSDT 0000000077cfe120 00064 (v01 TOSINV TOSINV00 00000001 01000013)
[ 0.000000] ACPI: FACP 0000000077cfd000 000F4 (v04 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0000000077cef000 09476 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 0000000077c93000 00040
[ 0.000000] ACPI: HPET 0000000077cfc000 00038 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 0000000077cfb000 0006C (v02 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0000000077cfa000 0003C (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! 0000000077cf9000 000A5 (v32 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 0000000077cee000 00176 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: BOOT 0000000077ced000 00028 (v01 TOSINV TOSINV00 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0000000077cec000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000077cfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x77cfffff]
[ 0.000000] NODE_DATA [mem 0x77ce7000-0x77cebfff]
[ 0.000000] [ffffea0000000000-ffffea0001dfffff] PMD -> [ffff880074200000-ffff880075ffffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x77b6bfff]
[ 0.000000] node 0: [mem 0x77bbf000-0x77c85fff]
[ 0.000000] node 0: [mem 0x77cbf000-0x77cebfff]
[ 0.000000] node 0: [mem 0x77cff000-0x77cfffff]
[ 0.000000] On node 0 totalpages: 490494
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7604 pages used for memmap
[ 0.000000] DMA32 zone: 486497 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77b6c000-0x77bbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77c86000-0x77cbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x77cec000-0x77cfefff]
[ 0.000000] e820: [mem 0x80000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880076600000 s86464 r8192 d24128 u524288
[ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 482805
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201402 initrd=boot/x86_64/archiso.img
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1899744K/1961976K available (5119K kernel code, 807K rwdata, 1628K rodata, 1144K init, 1288K bss, 62232K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 7864320 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2161.512 MHz processor
[ 0.003339] Calibrating delay loop (skipped), value calculated using timer frequency.. 4324.15 BogoMIPS (lpj=7205040)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003387] Security Framework initialized
[ 0.003404] AppArmor: AppArmor disabled by boot time parameter
[ 0.003405] Yama: becoming mindful.
[ 0.003633] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.007774] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.008450] Mount-cache hash table entries: 256
[ 0.008831] Initializing cgroup subsys memory
[ 0.008862] Initializing cgroup subsys devices
[ 0.008866] Initializing cgroup subsys freezer
[ 0.008869] Initializing cgroup subsys net_cls
[ 0.008872] Initializing cgroup subsys blkio
[ 0.008904] CPU: Physical Processor ID: 0
[ 0.008906] CPU: Processor Core ID: 0
[ 0.008909] mce: CPU supports 6 MCE banks
[ 0.008919] CPU0: Thermal monitoring enabled (TM2)
[ 0.008930] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
[ 0.009038] Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
[ 0.010444] ACPI: Core revision 20130725
[ 0.010448] TOSHIBA Satellite detected - force copy of DSDT to local memory
[ 0.010570] ACPI: Forced DSDT copy: length 0x09476 copied locally, original unmapped
[ 0.016698] ACPI: All ACPI Tables successfully acquired
[ 0.020011] ftrace: allocating 20320 entries in 80 pages
[ 0.027216] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062785] smpboot: CPU0: Intel(R) Pentium(R) Dual CPU T3400 @ 2.16GHz (fam: 06, model: 0f, stepping: 0d)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] perf_event_intel: PEBS disabled due to CPU errata
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.083419] smpboot: Booting Node 0, Processors # 1 OK
[ 0.096694] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096710] Brought up 2 CPUs
[ 0.096713] smpboot: Total of 2 processors activated (8649.30 BogoMIPS)
[ 0.097667] devtmpfs: initialized
[ 0.105993] PM: Registering ACPI NVS region [mem 0x77c86000-0x77cbefff] (233472 bytes)
[ 0.107250] RTC time: 4:00:36, date: 02/03/14
[ 0.107320] NET: Registered protocol family 16
[ 0.107477] cpuidle: using governor ladder
[ 0.107479] cpuidle: using governor menu
[ 0.107515] ACPI: bus type PCI registered
[ 0.107518] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.107601] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.107605] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.114576] PCI: Using configuration type 1 for base access
[ 0.115274] bio: create slab <bio-0> at 0
[ 0.115274] ACPI: Added _OSI(Module Device)
[ 0.115274] ACPI: Added _OSI(Processor Device)
[ 0.115274] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.115274] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.117503] ACPI: EC: Look up EC in DSDT
[ 0.119480] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.120679] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.121126] ACPI: SSDT 0000000077b77c18 0026B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.121590] ACPI: Dynamic OEM Table Load:
[ 0.121593] ACPI: SSDT (null) 0026B (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.121748] ACPI: SSDT 0000000077b75598 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.122196] ACPI: Dynamic OEM Table Load:
[ 0.122199] ACPI: SSDT (null) 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.136848] ACPI: SSDT 0000000077b76e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.137328] ACPI: Dynamic OEM Table Load:
[ 0.137331] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.143461] ACPI: SSDT 0000000077b77f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.143925] ACPI: Dynamic OEM Table Load:
[ 0.143928] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.156692] ACPI: EC: GPE storm detected(70 GPEs), transactions will use polling mode
[ 0.273795] ACPI: Interpreter enabled
[ 0.273805] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.273813] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.273838] ACPI: (supports S0 S3 S4 S5)
[ 0.273840] ACPI: Using IOAPIC for interrupt routing
[ 0.273881] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.274057] ACPI: No dock devices found.
[ 0.284145] ACPI: Power Resource [FN00] (on)
[ 0.285271] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.285278] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.285281] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.285843] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.286045] PCI host bridge to bus 0000:00
[ 0.286049] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.286052] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.286054] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.286057] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.286059] pci_bus 0000:00: root bus resource [mem 0x80000000-0xfebfffff]
[ 0.286071] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.286099] DMAR: Forcing write-buffer flush capability
[ 0.286100] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.286195] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.286213] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff 64bit]
[ 0.286223] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.286230] pci 0000:00:02.0: reg 0x20: [io 0x5110-0x5117]
[ 0.286336] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.286350] pci 0000:00:02.1: reg 0x10: [mem 0x93500000-0x935fffff 64bit]
[ 0.286515] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.286603] pci 0000:00:1a.0: reg 0x20: [io 0x50e0-0x50ff]
[ 0.286768] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.286856] pci 0000:00:1a.1: reg 0x20: [io 0x50c0-0x50df]
[ 0.287026] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.287058] pci 0000:00:1a.7: reg 0x10: [mem 0x96705c00-0x96705fff]
[ 0.287192] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.287295] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.287316] pci 0000:00:1b.0: reg 0x10: [mem 0x96700000-0x96703fff 64bit]
[ 0.287420] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.287480] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.287527] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.287633] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.287692] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.287743] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.287841] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.287903] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.287954] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.288048] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.288104] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.288160] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.288245] pci 0000:00:1d.0: reg 0x20: [io 0x50a0-0x50bf]
[ 0.288393] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.288445] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.288532] pci 0000:00:1d.1: reg 0x20: [io 0x5080-0x509f]
[ 0.288673] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.288722] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.288803] pci 0000:00:1d.2: reg 0x20: [io 0x5060-0x507f]
[ 0.288966] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.289053] pci 0000:00:1d.3: reg 0x20: [io 0x5040-0x505f]
[ 0.289225] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.289256] pci 0000:00:1d.7: reg 0x10: [mem 0x96705800-0x96705bff]
[ 0.289388] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.289461] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.289510] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.289629] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.289680] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.289899] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.289929] pci 0000:00:1f.2: reg 0x10: [io 0x5108-0x510f]
[ 0.289942] pci 0000:00:1f.2: reg 0x14: [io 0x511c-0x511f]
[ 0.289953] pci 0000:00:1f.2: reg 0x18: [io 0x5100-0x5107]
[ 0.289965] pci 0000:00:1f.2: reg 0x1c: [io 0x5118-0x511b]
[ 0.289975] pci 0000:00:1f.2: reg 0x20: [io 0x5020-0x503f]
[ 0.289987] pci 0000:00:1f.2: reg 0x24: [mem 0x96705000-0x967057ff]
[ 0.290061] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.290156] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.290180] pci 0000:00:1f.3: reg 0x10: [mem 0x96706000-0x967060ff 64bit]
[ 0.290212] pci 0000:00:1f.3: reg 0x20: [io 0x5000-0x501f]
[ 0.290471] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.290535] pci 0000:02:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.290644] pci 0000:02:00.0: reg 0x18: [mem 0x90410000-0x90410fff 64bit pref]
[ 0.290713] pci 0000:02:00.0: reg 0x20: [mem 0x90400000-0x9040ffff 64bit pref]
[ 0.291017] pci 0000:02:00.0: unsupported PM cap regs version (7)
[ 0.291241] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.291246] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.291252] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff]
[ 0.291260] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x914fffff 64bit pref]
[ 0.291374] pci 0000:03:00.0: [168c:001c] type 00 class 0x020000
[ 0.291406] pci 0000:03:00.0: reg 0x10: [mem 0x94600000-0x9460ffff 64bit]
[ 0.291630] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.291643] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.291648] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.291654] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff]
[ 0.291661] pci 0000:00:1c.1: bridge window [mem 0x91500000-0x924fffff 64bit pref]
[ 0.291764] acpiphp: Slot [1] registered
[ 0.291771] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.291777] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.291782] pci 0000:00:1c.4: bridge window [mem 0x93600000-0x945fffff]
[ 0.291790] pci 0000:00:1c.4: bridge window [mem 0x92500000-0x934fffff 64bit pref]
[ 0.291902] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[ 0.291916] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.291919] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.291921] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.291924] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.292142] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12)
[ 0.292216] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.292289] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.292360] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.292431] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.292503] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.292574] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.292644] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.293398] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.293413] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.293477] Found 1 acpi root devices
[ 0.293538] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.293662] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.293662] vgaarb: loaded
[ 0.293662] vgaarb: bridge control possible 0000:00:02.0
[ 0.293662] PCI: Using ACPI for IRQ routing
[ 0.295666] PCI: pci_cache_line_size set to 64 bytes
[ 0.295756] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.295762] e820: reserve RAM buffer [mem 0x77b6c000-0x77ffffff]
[ 0.295764] e820: reserve RAM buffer [mem 0x77c86000-0x77ffffff]
[ 0.295766] e820: reserve RAM buffer [mem 0x77cec000-0x77ffffff]
[ 0.295768] e820: reserve RAM buffer [mem 0x77d00000-0x77ffffff]
[ 0.295898] NetLabel: Initializing
[ 0.295900] NetLabel: domain hash size = 128
[ 0.295901] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295917] NetLabel: unlabeled traffic allowed by default
[ 0.295944] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.295949] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.295954] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.297695] Switched to clocksource hpet
[ 0.304063] pnp: PnP ACPI init
[ 0.304092] ACPI: bus type PNP registered
[ 0.304555] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.4 BAR 13 [io 0x1000-0x1fff]
[ 0.304628] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.304631] system 00:00: [io 0x0810-0x0817] has been reserved
[ 0.304634] system 00:00: [io 0x0820-0x0823] has been reserved
[ 0.304637] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.304639] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.304642] system 00:00: [io 0x0580-0x05ff] has been reserved
[ 0.304645] system 00:00: [io 0x0600-0x0627] has been reserved
[ 0.304649] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.304651] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.304654] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.304657] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.304660] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.304662] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.304665] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.304668] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.304671] system 00:00: [mem 0xff800000-0xffffffff] could not be reserved
[ 0.304676] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.304687] pnp 00:01: [dma 4]
[ 0.304718] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.304765] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.304873] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.304912] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.304963] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.305021] pnp 00:06: Plug and Play ACPI device, IDs SYN1913 SYN1900 SYN0002 PNP0f13 (active)
[ 0.305172] pnp: PnP ACPI: found 7 devices
[ 0.305174] ACPI: bus type PNP unregistered
[ 0.312417] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.312423] pci 0000:00:1c.0: bridge window [io 0x3000-0x4fff]
[ 0.312430] pci 0000:00:1c.0: bridge window [mem 0x95700000-0x966fffff]
[ 0.312436] pci 0000:00:1c.0: bridge window [mem 0x90400000-0x914fffff 64bit pref]
[ 0.312444] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.312448] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.312455] pci 0000:00:1c.1: bridge window [mem 0x94600000-0x956fffff]
[ 0.312460] pci 0000:00:1c.1: bridge window [mem 0x91500000-0x924fffff 64bit pref]
[ 0.312468] pci 0000:00:1c.4: PCI bridge to [bus 06-07]
[ 0.312472] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]
[ 0.312478] pci 0000:00:1c.4: bridge window [mem 0x93600000-0x945fffff]
[ 0.312484] pci 0000:00:1c.4: bridge window [mem 0x92500000-0x934fffff 64bit pref]
[ 0.312492] pci 0000:00:1e.0: PCI bridge to [bus 04]
[ 0.312507] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.312510] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.312512] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.312515] pci_bus 0000:00: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.312517] pci_bus 0000:02: resource 0 [io 0x3000-0x4fff]
[ 0.312520] pci_bus 0000:02: resource 1 [mem 0x95700000-0x966fffff]
[ 0.312522] pci_bus 0000:02: resource 2 [mem 0x90400000-0x914fffff 64bit pref]
[ 0.312525] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.312527] pci_bus 0000:03: resource 1 [mem 0x94600000-0x956fffff]
[ 0.312529] pci_bus 0000:03: resource 2 [mem 0x91500000-0x924fffff 64bit pref]
[ 0.312532] pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
[ 0.312534] pci_bus 0000:06: resource 1 [mem 0x93600000-0x945fffff]
[ 0.312537] pci_bus 0000:06: resource 2 [mem 0x92500000-0x934fffff 64bit pref]
[ 0.312539] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.312541] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.312544] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.312546] pci_bus 0000:04: resource 7 [mem 0x80000000-0xfebfffff]
[ 0.312593] NET: Registered protocol family 2
[ 0.312808] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.312953] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.313069] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.313132] TCP: reno registered
[ 0.313145] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.313165] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.313290] NET: Registered protocol family 1
[ 0.313313] pci 0000:00:02.0: Boot video device
[ 1.646685] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.980019] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.980295] PCI: CLS 64 bytes, default 64
[ 2.980359] Unpacking initramfs...
[ 5.721347] Freeing initrd memory: 19204K (ffff8800768ab000 - ffff880077b6c000)
[ 5.721400] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 5.721402] Simple Boot Flag at 0x44 set to 0x1
[ 5.721585] Scanning for low memory corruption every 60 seconds
[ 5.722005] audit: initializing netlink socket (disabled)
[ 5.722025] type=2000 audit(1391400041.719:1): initialized
[ 5.736232] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 5.737874] zbud: loaded
[ 5.738072] VFS: Disk quotas dquot_6.5.2
[ 5.738126] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.738361] msgmni has been set to 3747
[ 5.738724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 5.738771] io scheduler noop registered
[ 5.738774] io scheduler deadline registered
[ 5.738810] io scheduler cfq registered (default)
[ 5.739136] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 5.739386] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 5.739471] pcieport 0000:00:1c.4: enabling device (0000 -> 0003)
[ 5.739639] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 5.739740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 5.739759] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 5.739822] intel_idle: does not run on family 6 model 15
[ 5.739881] GHES: HEST is not enabled!
[ 5.739965] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 5.740521] Linux agpgart interface v0.103
[ 5.740604] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 5.770209] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.770256] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 5.770379] mousedev: PS/2 mouse device common for all mice
[ 5.771302] rtc_cmos 00:02: RTC can wake from S4
[ 5.771474] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 5.771510] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[ 5.771618] drop_monitor: Initializing network drop monitor service
[ 5.771701] TCP: cubic registered
[ 5.771814] NET: Registered protocol family 10
[ 5.772033] NET: Registered protocol family 17
[ 5.772044] Key type dns_resolver registered
[ 5.772322] registered taskstats version 1
[ 5.772977] Magic number: 2:581:8
[ 5.773090] rtc_cmos 00:02: setting system clock to 2014-02-03 04:00:42 UTC (1391400042)
[ 5.773157] PM: Hibernation image not present or could not be loaded.
[ 5.774695] Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
[ 5.774702] Write protecting the kernel read-only data: 8192k
[ 5.778338] Freeing unused kernel memory: 1012K (ffff880001503000 - ffff880001600000)
[ 5.779789] Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
[ 5.791935] systemd-udevd[47]: starting version 208
[ 5.804285] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 5.817811] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.817819] ACPI: Power Button [PWRB]
[ 5.817913] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 5.819923] ACPI: Lid Switch [LID0]
[ 5.820087] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.820094] ACPI: Power Button [PWRF]
[ 5.835548] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 5.835668] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 5.836407] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 5.836578] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 5.838170] [drm] Initialized drm 1.1.0 20060810
[ 5.843237] ACPI: bus type USB registered
[ 5.843284] usbcore: registered new interface driver usbfs
[ 5.844901] usbcore: registered new interface driver hub
[ 5.845043] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 5.845062] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 5.845440] r8169 0000:02:00.0: irq 43 for MSI/MSI-X
[ 5.845619] usbcore: registered new device driver usb
[ 5.845978] r8169 0000:02:00.0 eth0: RTL8102e at 0xffffc9000031e000, 00:1e:33:77:17:ff, XID 14a00000 IRQ 43
[ 5.846922] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.847211] ehci-pci: EHCI PCI platform driver
[ 5.847429] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.847465] ehci-pci 0000:00:1a.7: setting latency timer to 64
[ 5.847486] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 5.847496] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.847518] ehci-pci 0000:00:1a.7: debug port 1
[ 5.851133] SCSI subsystem initialized
[ 5.851435] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 5.851477] ehci-pci 0000:00:1a.7: irq 19, io mem 0x96705c00
[ 5.858037] libata version 3.00 loaded.
[ 5.860105] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.860401] hub 1-0:1.0: USB hub found
[ 5.860413] hub 1-0:1.0: 4 ports detected
[ 5.860881] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.860886] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.860894] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 5.860941] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000050e0
[ 5.861165] hub 2-0:1.0: USB hub found
[ 5.861176] hub 2-0:1.0: 2 ports detected
[ 5.861502] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.861506] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.861514] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 5.861559] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000050c0
[ 5.861761] hub 3-0:1.0: USB hub found
[ 5.861770] hub 3-0:1.0: 2 ports detected
[ 5.862094] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.862099] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.862110] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 5.862173] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[ 5.862518] hub 4-0:1.0: USB hub found
[ 5.862536] hub 4-0:1.0: 2 ports detected
[ 5.862938] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.862944] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.862956] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 5.862991] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005080
[ 5.863221] hub 5-0:1.0: USB hub found
[ 5.863232] hub 5-0:1.0: 2 ports detected
[ 5.863599] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.863604] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.863611] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 5.863651] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005060
[ 5.863869] hub 6-0:1.0: USB hub found
[ 5.863885] hub 6-0:1.0: 2 ports detected
[ 5.864240] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.864245] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.864252] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 5.864300] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00005040
[ 5.864816] hub 7-0:1.0: USB hub found
[ 5.864830] hub 7-0:1.0: 2 ports detected
[ 5.865511] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 5.866246] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 5.866256] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 5.866276] ehci-pci 0000:00:1d.7: debug port 1
[ 5.870291] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 5.870307] ehci-pci 0000:00:1d.7: irq 23, io mem 0x96705800
[ 5.880033] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.880639] hub 8-0:1.0: USB hub found
[ 5.880654] hub 8-0:1.0: 8 ports detected
[ 5.903435] hub 4-0:1.0: USB hub found
[ 5.903449] hub 4-0:1.0: 2 ports detected
[ 5.926760] hub 5-0:1.0: USB hub found
[ 5.926773] hub 5-0:1.0: 2 ports detected
[ 5.950089] hub 6-0:1.0: USB hub found
[ 5.950105] hub 6-0:1.0: 2 ports detected
[ 5.973422] hub 7-0:1.0: USB hub found
[ 5.973436] hub 7-0:1.0: 2 ports detected
[ 5.973567] ahci 0000:00:1f.2: version 3.0
[ 5.973836] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 5.973962] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 5.973966] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[ 5.973973] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.994153] scsi0 : ahci
[ 5.994272] scsi1 : ahci
[ 5.994364] scsi2 : ahci
[ 5.994481] scsi3 : ahci
[ 5.994574] scsi4 : ahci
[ 5.994649] scsi5 : ahci
[ 5.994712] ata1: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705100 irq 44
[ 5.994715] ata2: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705180 irq 44
[ 5.994718] ata3: DUMMY
[ 5.994719] ata4: DUMMY
[ 5.994722] ata5: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705300 irq 44
[ 5.994726] ata6: SATA max UDMA/133 abar m2048@0x96705000 port 0x96705380 irq 44
[ 5.995447] [drm] Memory usable by graphics device = 2048M
[ 5.995460] i915 0000:00:02.0: setting latency timer to 64
[ 6.031720] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 6.031732] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.031734] [drm] Driver supports precise vblank timestamp query.
[ 6.031800] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.166711] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 6.292176] fbcon: inteldrmfb (fb0) is primary device
[ 6.313402] ata2: SATA link down (SStatus 0 SControl 300)
[ 6.323381] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.333408] [drm:intel_pipe_config_compare] *ERROR* mismatch in gmch_pfit.lvds_border_bits (expected 32768, found 0)
[ 6.333409] ------------[ cut here ]------------
[ 6.333447] WARNING: CPU: 0 PID: 50 at drivers/gpu/drm/i915/intel_display.c:8853 check_crtc_state+0x61f/0xb10 [i915]()
[ 6.333447] pipe state doesn't match!
[ 6.333459] Modules linked in: ahci libahci libata scsi_mod uhci_hcd ehci_pci i915(+) ehci_hcd r8169 mii usbcore usb_common i2c_algo_bit drm_kms_helper drm intel_agp i2c_core intel_gtt video button
[ 6.333462] CPU: 0 PID: 50 Comm: systemd-udevd Not tainted 3.12.9-2-ARCH #1
[ 6.333463] Hardware name: TOSHIBA Satellite L305/Portable PC, BIOS 2.20 12/09/2009
[ 6.333467] 0000000000000009 ffff880072a45188 ffffffff814ed0d3 ffff880072a451d0
[ 6.333469] ffff880072a451c0 ffffffff81062aed ffff8800737eb000 ffff8800737eb6d8
[ 6.333471] ffff880072ee4c40 ffff880072ee4800 ffff880072ee4c48 ffff880072a45220
[ 6.333471] Call Trace:
[ 6.333478] [<ffffffff814ed0d3>] dump_stack+0x54/0x8d
[ 6.333482] [<ffffffff81062aed>] warn_slowpath_common+0x7d/0xa0
[ 6.333484] [<ffffffff81062b5c>] warn_slowpath_fmt+0x4c/0x50
[ 6.333504] [<ffffffffa00c052f>] check_crtc_state+0x61f/0xb10 [i915]
[ 6.333527] [<ffffffffa00cbdf3>] intel_modeset_check_state+0x2c3/0x780 [i915]
[ 6.333547] [<ffffffffa00cc345>] intel_set_mode+0x25/0x30 [i915]
[ 6.333568] [<ffffffffa00ccc33>] intel_crtc_set_config+0x7e3/0x9d0 [i915]
[ 6.333578] [<ffffffffa003b50d>] drm_mode_set_config_internal+0x5d/0xe0 [drm]
[ 6.333581] [<ffffffffa0084671>] drm_fb_helper_set_par+0x71/0xf0 [drm_kms_helper]
[ 6.333584] [<ffffffff812f9454>] fbcon_init+0x4f4/0x570
[ 6.333588] [<ffffffff81363888>] visual_init+0xb8/0x120
[ 6.333590] [<ffffffff81365e53>] do_bind_con_driver+0x163/0x380
[ 6.333592] [<ffffffff81366654>] do_take_over_console+0x114/0x1c0
[ 6.333594] [<ffffffff812f9533>] do_fbcon_takeover+0x63/0xd0
[ 6.333597] [<ffffffff812fdc4d>] fbcon_event_notify+0x60d/0x720
[ 6.333599] [<ffffffff814f7d6c>] notifier_call_chain+0x4c/0x70
[ 6.333603] [<ffffffff8108a8bd>] __blocking_notifier_call_chain+0x4d/0x70
[ 6.333605] [<ffffffff8108a8f6>] blocking_notifier_call_chain+0x16/0x20
[ 6.333608] [<ffffffff812ed94b>] fb_notifier_call_chain+0x1b/0x20
[ 6.333610] [<ffffffff812ef93b>] register_framebuffer+0x1db/0x310
[ 6.333613] [<ffffffffa008441f>] drm_fb_helper_initial_config+0x32f/0x510 [drm_kms_helper]
[ 6.333616] [<ffffffff811893d7>] ? kmem_cache_alloc_trace+0x257/0x280
[ 6.333618] [<ffffffffa00828a9>] ? drm_fb_helper_init+0x179/0x210 [drm_kms_helper]
[ 6.333642] [<ffffffffa00ef6f1>] intel_fbdev_initial_config+0x21/0x30 [i915]
[ 6.333660] [<ffffffffa0096307>] i915_driver_load+0xf27/0xf50 [i915]
[ 6.333669] [<ffffffffa0036f99>] drm_get_pci_dev+0x129/0x2f0 [drm]
[ 6.333686] [<ffffffffa009265c>] i915_pci_probe+0x2c/0x70 [i915]
[ 6.333690] [<ffffffff812c4bee>] local_pci_probe+0x3e/0x70
[ 6.333692] [<ffffffff812c4df1>] pci_device_probe+0x121/0x130
[ 6.333696] [<ffffffff81389be7>] driver_probe_device+0x87/0x3a0
[ 6.333698] [<ffffffff81389fd3>] __driver_attach+0x93/0xa0
[ 6.333700] [<ffffffff81389f40>] ? __device_attach+0x40/0x40
[ 6.333702] [<ffffffff81387a83>] bus_for_each_dev+0x63/0xa0
[ 6.333704] [<ffffffff8138963e>] driver_attach+0x1e/0x20
[ 6.333706] [<ffffffff813891b0>] bus_add_driver+0x200/0x2d0
[ 6.333708] [<ffffffffa0134000>] ? 0xffffffffa0133fff
[ 6.333710] [<ffffffff8138a654>] driver_register+0x64/0xf0
[ 6.333712] [<ffffffffa0134000>] ? 0xffffffffa0133fff
[ 6.333714] [<ffffffff812c4a5b>] __pci_register_driver+0x4b/0x50
[ 6.333719] [<ffffffffa003727a>] drm_pci_init+0x11a/0x130 [drm]
[ 6.333722] [<ffffffff814f0e1e>] ? mutex_unlock+0xe/0x10
[ 6.333724] [<ffffffffa0134000>] ? 0xffffffffa0133fff
[ 6.333739] [<ffffffffa0134066>] i915_init+0x66/0x68 [i915]
[ 6.333742] [<ffffffff810020f2>] do_one_initcall+0xf2/0x1a0
[ 6.333745] [<ffffffff8108a8c8>] ? __blocking_notifier_call_chain+0x58/0x70
[ 6.333747] [<ffffffff810d2f46>] load_module+0x1b76/0x2620
[ 6.333750] [<ffffffff810cf8f0>] ? store_uevent+0x40/0x40
[ 6.333753] [<ffffffff810d3b66>] SyS_finit_module+0x86/0xb0
[ 6.333756] [<ffffffff814fbbed>] system_call_fastpath+0x1a/0x1f
[ 6.333757] ---[ end trace 9a79094c20842610 ]---
[ 6.356434] Console: switching to colour frame buffer device 160x50
[ 6.359569] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.359571] i915 0000:00:02.0: registered panic notifier
[ 6.367896] acpi device:03: registered as cooling_device0
[ 6.367995] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 6.368062] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 6.368551] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.436706] usb 1-4: new high-speed USB device number 3 using ehci-pci
[ 6.480036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.490054] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.503918] ata6.00: ATAPI: TSSTcorp CDDVDW TS-L633A, TO01, max UDMA/100
[ 6.517114] ata6.00: configured for UDMA/100
[ 6.546779] ata1.00: ATA-8: TOSHIBA MK2552GSX, LV010M, max UDMA/100
[ 6.546783] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 6.547690] ata1.00: configured for UDMA/100
[ 6.547852] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2552GS LV01 PQ: 0 ANSI: 5
[ 6.551525] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A TO01 PQ: 0 ANSI: 5
[ 6.555197] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 6.555272] sd 0:0:0:0: [sda] Write Protect is off
[ 6.555276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.555307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.563105] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.563110] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.563322] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 6.577056] usbcore: registered new interface driver usb-storage
[ 6.577480] ums-realtek 1-4:1.0: USB Mass Storage device detected
[ 6.579940] scsi6 : usb-storage 1-4:1.0
[ 6.580072] usbcore: registered new interface driver ums-realtek
[ 6.619760] sda: sda1 sda2 sda3
[ 6.620283] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.680046] usb 8-1: new high-speed USB device number 2 using ehci-pci
[ 6.723358] tsc: Refined TSC clocksource calibration: 2161.486 MHz
[ 6.806287] usb-storage 8-1:1.0: USB Mass Storage device detected
[ 6.806430] scsi7 : usb-storage 8-1:1.0
[ 7.296719] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 7.585680] scsi 6:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 7.589928] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.723410] Switched to clocksource tsc
[ 7.807500] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
[ 7.808757] sd 7:0:0:0: [sdc] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
[ 7.809360] sd 7:0:0:0: [sdc] Write Protect is off
[ 7.809365] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 7.809984] sd 7:0:0:0: [sdc] No Caching mode page found
[ 7.810038] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 7.812983] sd 7:0:0:0: [sdc] No Caching mode page found
[ 7.813024] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 7.813741] sdc: sdc1 sdc2
[ 8.039236] sd 7:0:0:0: [sdc] No Caching mode page found
[ 8.039277] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 8.039312] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 8.669981] ISO 9660 Extensions: RRIP_1991A
[ 8.688130] loop: module loaded
[ 8.859911] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 8.879202] device-mapper: uevent: version 1.0.3
[ 8.879357] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
[ 8.885173] bio: create slab <bio-1> at 1
[ 8.904551] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
[ 9.437289] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 9.443163] systemd[1]: Set hostname to <archiso>.
[ 9.534674] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 9.534770] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 9.534791] systemd[1]: Starting Remote File Systems.
[ 9.534951] systemd[1]: Reached target Remote File Systems.
[ 9.534964] systemd[1]: Starting Root Slice.
[ 9.535275] systemd[1]: Created slice Root Slice.
[ 9.535290] systemd[1]: Starting User and Session Slice.
[ 9.535500] systemd[1]: Created slice User and Session Slice.
[ 9.535513] systemd[1]: Starting System Slice.
[ 9.535692] systemd[1]: Created slice System Slice.
[ 9.535707] systemd[1]: Starting system-getty.slice.
[ 9.535910] systemd[1]: Created slice system-getty.slice.
[ 9.535923] systemd[1]: Starting Slices.
[ 9.536023] systemd[1]: Reached target Slices.
[ 9.536037] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 9.536189] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 9.536202] systemd[1]: Starting Delayed Shutdown Socket.
[ 9.536339] systemd[1]: Listening on Delayed Shutdown Socket.
[ 9.536351] systemd[1]: Starting LVM2 metadata daemon socket.
[ 9.536482] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 9.536494] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 9.536624] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 9.536636] systemd[1]: Starting Encrypted Volumes.
[ 9.538052] systemd[1]: Reached target Encrypted Volumes.
[ 9.538104] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 9.539690] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 9.539712] systemd[1]: Starting Journal Socket.
[ 9.541224] systemd[1]: Listening on Journal Socket.
[ 9.541413] systemd[1]: Starting Apply Kernel Variables...
[ 9.548274] systemd[1]: Starting Load Kernel Modules...
[ 9.551238] systemd[1]: Mounting POSIX Message Queue File System...
[ 9.554809] systemd[1]: Mounting Huge Pages File System...
[ 9.557044] systemd[1]: Starting Journal Service...
[ 9.561210] systemd[1]: Started Journal Service.
[ 9.853230] systemd-journald[157]: Vacuuming done, freed 0 bytes
[ 9.894466] FS-Cache: Loaded
[ 9.955808] RPC: Registered named UNIX socket transport module.
[ 9.955814] RPC: Registered udp transport module.
[ 9.955816] RPC: Registered tcp transport module.
[ 9.955817] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.085173] FS-Cache: Netfs 'nfs' registered for caching
[ 10.142900] systemd-udevd[187]: starting version 208
[ 10.197123] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 10.673822] ACPI: Requesting acpi_cpufreq
[ 10.688878] Monitor-Mwait will be used to enter C-1 state
[ 10.688891] Monitor-Mwait will be used to enter C-2 state
[ 10.688896] tsc: Marking TSC unstable due to TSC halts in idle
[ 10.688941] ACPI: acpi_idle registered with cpuidle
[ 10.689683] Switched to clocksource hpet
[ 10.787812] ACPI: Battery Slot [BAT0] (battery present)
[ 10.828742] ACPI: AC Adapter [ADP0] (on-line)
[ 10.858236] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.977996] ACPI: Fan [FAN] (on)
[ 11.027394] thermal LNXTHERM:00: registered as thermal_zone0
[ 11.027399] ACPI: Thermal Zone [THRM] (38 C)
[ 11.084350] wmi: Mapper loaded
[ 11.250190] systemd-udevd[200]: renamed network interface eth0 to enp2s0
[ 11.269021] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMBA 1 (20130725/utaddress-251)
[ 11.269032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.269036] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 11.269040] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.269042] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251)
[ 11.269046] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 11.269048] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 11.271170] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19
[ 11.271744] input: Toshiba input device as /devices/virtual/input/input6
[ 11.303900] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 11.488116] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 11.502556] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.504790] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.508418] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 11.607189] media: Linux media interface: v0.10
[ 11.614358] cfg80211: Calling CRDA to update world regulatory domain
[ 11.664492] r8169 0000:02:00.0 enp2s0: link down
[ 11.664527] r8169 0000:02:00.0 enp2s0: link down
[ 11.664542] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.827588] input: PC Speaker as /devices/platform/pcspkr/input/input10
[ 11.845447] Linux video capture interface: v2.00
[ 11.887623] Bluetooth: Core ver 2.16
[ 11.887653] NET: Registered protocol family 31
[ 11.887655] Bluetooth: HCI device and connection manager initialized
[ 11.887666] Bluetooth: HCI socket layer initialized
[ 11.887669] Bluetooth: L2CAP socket layer initialized
[ 11.887676] Bluetooth: SCO socket layer initialized
[ 11.927341] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3
[ 12.008018] usbcore: registered new interface driver btusb
[ 12.071971] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3
[ 12.073621] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 12.138239] iTCO_vendor_support: vendor-support=0
[ 12.212116] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 12.212164] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 12.212290] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 12.226526] ath5k 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 12.227023] ath5k 0000:03:00.0: registered as 'phy0'
[ 12.371710] uvcvideo: Found UVC 1.00 device CNF7051 (04f2:b070)
[ 12.388446] input: CNF7051 as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input12
[ 12.388694] usbcore: registered new interface driver uvcvideo
[ 12.388697] USB Video Class driver (1.1.1)
[ 12.443999] cfg80211: World regulatory domain updated:
[ 12.444008] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.444011] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.444014] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 12.444016] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 12.444018] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 12.444021] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 12.444023] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 12.888755] ath: EEPROM regdomain: 0x65
[ 12.888760] ath: EEPROM indicates we should expect a direct regpair map
[ 12.888764] ath: Country alpha2 being used: 00
[ 12.888766] ath: Regpair used: 0x65
[ 12.938969] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.939468] ath5k: phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 12.970186] systemd-udevd[200]: renamed network interface wlan0 to wlp3s0
[ 13.098892] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa04000/0x20000, board id: 3655, fw id: 515625
[ 13.098900] psmouse serio1: synaptics: Toshiba Satellite L305 detected, limiting rate to 40pps.
[ 13.176505] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11
[ 13.281202] r8169 0000:02:00.0 enp2s0: link up
[ 13.281217] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 58.128158] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 58.130408] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 58.130452] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 109.328326] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 109.330585] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 109.330630] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 160.528316] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 160.530573] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 160.530618] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 211.728185] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 211.730571] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 211.732244] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 262.928181] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 262.930566] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 262.930611] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 265.370085] usb 8-2: new high-speed USB device number 4 using ehci-pci
[ 265.494922] usb-storage 8-2:1.0: USB Mass Storage device detected
[ 265.495068] scsi8 : usb-storage 8-2:1.0
[ 266.497382] scsi 8:0:0:0: Direct-Access ADATA USB Flash Drive 1.00 PQ: 0 ANSI: 6
[ 266.498486] sd 8:0:0:0: [sdd] 30869504 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 266.498838] sd 8:0:0:0: [sdd] Write Protect is off
[ 266.498846] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 266.499693] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: disabled, doesn't support DPO or FUA
[ 266.504858] sdd: sdd1
[ 266.507231] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 314.128208] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 314.130471] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 314.130515] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 365.328177] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 365.330426] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 365.330468] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 416.528155] sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 416.530414] sd 6:0:0:0: [sdb] Asking for cache data failed
[ 416.532015] sd 6:0:0:0: [sdb] Assuming drive cache: write through
dmesg after reboot
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-2-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 31 10:22:54 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=arch archisolabel=ARCH_201402 initrd=boot/x86_64/archiso.img
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000077b6bfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077b6c000-0x0000000077bbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000077bbf000-0x0000000077c85fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077c86000-0x0000000077cbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000077cbf000-0x0000000077cebfff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077cec000-0x0000000077cfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000077cff000-0x0000000077cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000077d00000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA Satellite L305/Portable PC, BIOS 2.20 12/09/2009
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x77d00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-CFFFF uncachable
[ 0.000000] D0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFFE0000 mask FFFFE0000 write-protect
[ 0.000000] 1 base 000000000 mask FC0000000 write-back
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 078000000 mask FF8000000 uncachable
[ 0.000000] 4 base 077E00000 mask FFFE00000 uncachable
[ 0.000000] 5 base 077D00000 mask FFFF00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x766Hi!
Well, I turned off the WiFi physical switch, turned on the computer and then I did:
sudo systemctl disable NetworkManager
sudo systemctl disable dhcpcd
sudo systemctl disable netctl
I'm not sure if that's enough.
Then I rebooted the machine, connected the ethernet cable, and:
[me@there ~]$ sudo dhcpcd
dhcpcd[520]: version 6.1.0 starting
dhcpcd[520]: no interfaces have a carrier
dhcpcd[520]: forced to background, child pid 639
I ping Google, and I could reach it, but I could not connect some other device. Then:
[me@there ~]$ sudo dhcpcd -x
dhcpcd[742]: sending signal 15 to pid 639
dhcpcd[742]: waiting por pid 693 to exit
Again:
[me@there ~]$ sudo dhcpcd
dhcpcd[746]: version 6.1.0 starting
dhcpcd[746]: wlp3s0: up_interface: Operation not possible due to RF-kill
dhcpcd[746]: enp2s0: rebinding lease of 192.168.1.70
dhcpcd[746]: wlp3s0: waiting for a carrier
dhcpcd[746]: no interfaces have a carrier
dhcpcd[746]: enp2s0: soliciting a DHCP lease
dhcpcd[746]: timed out
dhcpcd[746]: forced to background, child pid 868
And, just to be sure, ping returned "unknown host".
After a while, the router restarted.
I also looked for a newer firmware for my router, but I couldn't find one, nor the manufacturer home page.
And I have thought like that, fukawi2, ArchLinux is so Up-To-Date, other things may fail.
I can request a new router to my ISP, but I may encounter this issue again when I use my laptop somewhere else.
Last edited by Ricardo Galo (2014-02-05 18:31:36) -
I bought an ipod 4g at a pawn shop, it was locked and disabled but the guy said I could restore it by connecting it to my computer and pressing the home and sleep buttons at the same time, it didn't work and he won't take back the ipod what do i do?
When I try connecting it to my computer itunes opens and says I cannot connect to the ipod because it is disabled, enter passcode on ipod. The ipod is locked and disabled and will not allow me to try and put in a passcode, which I wouldn't be able to do because I have no idea what it might have been.
I downloaded the newest version of Itunes, restarted computer, connected ipod, nothing, held every button down for what seems like forever, nothing. I think I have been screwed by the pawnshop. Is there anyway of restoring this thing or is now just a $60.00 paperweight?torreto44. that does not work with a Disabled iPod. Jim's gave the correct answer for a Disabled iPod
torreto44 wrote:
Hey man don't worry bout it ! Hold the power button and the circle button for a long time and it should reboot meaning the iPod will restart and u can set it up as yours with new apple i.d and password -
On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done. -
X61 - Vista Business - Client Security Solution Error - There was a problem connecting to the TPM
During startup my x61 has been displaying the following message, 'Client Security Solution' - "There was a problem connecting to the TPM (security device) ont his computer. It is possile that anti-virus or firewall software is blocking the connection. A missing or disabled device driver could also cause this problem. Please refer to the online documentation for more information".
I have spent an extraordinary amount of time and effort to find identify the cause and a solution for this problem. It occurs whether or not virus software is enabled or disabled and numerous calls to Lenovo, Symantec, Kaspersky, and Microsoft have resulted in finger pointing and no answers. None of the vendors acknowledge the problem yet this same issue is a significant topic of concern as found in various blogs and 'help' sites. Lenovo thought it was hardware and changed the motherboard. Lenovo told me to call Microsoft since it was a Vista issue. Microsoft told me to call Lenovo since Vista Business was preinstalled on the machine. Lenovo told me to call Microsoft and so it goes. I removed Symantec's anti-virus and replaced it with Kaspersky.
The strangest thing is that the module works intermitently and it seems that everytime a Lenovo update is performed (via Thinkvantage) the problem reoccurs for sometime.
Does anyone out there have an understanding of the cause and a potential solution???I have the same problem on an X 60 platform, which only surfaced in the last two weeks subsequent to running all of the Lenovo updates. Prior to this, I had reinstalled all programs, starting with the Recovery Disks for the Think Pad. Everything, including start up, was exceptionally fast. Once I ran the most recent BIOS updates, along with several others, this error message surfaced. It is intermittent, however, and I have not noted an issue.
In reviewing several other Message Boards, I have seen this issue raised several times. Here is a link to a thread where the individual did achieve a solution through Lenovo, but their response is nonspecific as to what they did: (http://forums.lenovo.com/lnv/board/message?board.id=T400_series_ThinkPads&message.id=7143&query.id=1... -
[HELP] Error: "JDBC theme based FOI support is disabled for the given data"
Hi all,
I have already set up MapViewer version 10.1.3.3 on BISE1 10g OC4J server. I am current using JDK 1.6. I create a mvdemo/mvdemo user for demo data.
The MapViewer demo is running fine with some demo without CHART. But give this error with some maps that have CHART like: "Dynamic theme, BI data and Pie chart style", "Dynamic theme and dynamic Bar chart style". The error is:
----------ERROR------------
Cannot process the FOI response from MapViewer server. Server message is: <?xml version=\"1.0\" encoding=\"UTF-8\" ?> <oms_error> MAPVIEWER-06009: Error processing an FOI request.\nRoot cause:FOIServlet:MAPVIEWER-06016: JDBC theme based FOI support is disabled for the given data source. [mvdemo]</oms_error>.
----------END ERROR------
I searched many threads on this forum, some point me to have this allow_jdbc_theme_based_foi="true" in mapViewerConfig.xml and restart MapViewer.
<map_data_source name="mvdemo"
jdbc_host="localhost"
jdbc_sid="bise1db"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
Error Images: [http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png|http://i264.photobucket.com/albums/ii176/necrombi/misc/jdbcerror.png]
I have this configuration, but no luck. Could anyone show me how to resolve this problem?
Rgds,
Dung NguyenOop, i managed to have this prob resolved!
My prob may come from this I use both scott and mvdemo schema for keeping demo data (import demo data).
Steps i made to resolve my prob are:
1) Undeploy MapViewer from Application Server Control (http://localhost:9704/em in my case)
2) Drop user mvdemo
3) Download mapviewer kit from Oracle Fusion Middleware MapViewer & Map Builder Version 11.1.1.2
4) Deploy MapViewer again
5) Recreate mvdemo and import demo data
6) Run mcsdefinition.sql, mvdemo.sql with mvdemo user (granted dba already)
7) Edit mapViewerConfig.xml
<map_data_source name="mvdemo"
jdbc_host="dungnguyen-pc"
jdbc_sid="bise1db"
jdbc_port="1521"
jdbc_user="mvdemo"
jdbc_password="!mvdemo"
jdbc_mode="thin"
number_of_mappers="3"
allow_jdbc_theme_based_foi="true"
/>
Save & Restart MapViewer
And now, all demos run fine. Hope this helpful for who meet prob like my case. -
dont know what to do. When watching a movie, closed caption comes up and it wont go away unless I stop the movie and restart it. Closed caption and sub titles are off but still comes up. I restored my apple tv to factory settings to see if that would stop it, but it didn't work still comes up. What can I do?
Hi,
I suggest you try the steps in this thread for test:
Disable Suggested Sites does not work.
http://answers.microsoft.com/en-us/ie/forum/ie9-windows_7/disable-suggested-sites-does-not-work/4ba064b1-1c6e-43f1-939e-2db1d335b2ef
Regards,
Vincent Wang
TechNet Community Support -
Quality of service (QOS) is disabled in the HTTP service. Unable to tur...
Hi,
"Quality of service (QOS) is disabled in the HTTP service. Unable to turn on QOS features." this message is seen and server restart itself. Why this occur?
Thanks..That message is logged when you have QOS disabled. Check http://docs.sun.com/source/817-1831-10/agsnmp.html#wp999778 for information on enabling QOS.
However, the server should not crash/restart. Please describe the steps to reproduce the problem.
Message was edited by:
Arvind_Srinivasan -
I have edited the default edit form for my Issue Tracking Tool using Info Path, But currently when I try accessing the form using IE 10 64x , I got the following error-
“The form cannot be displayed in the browser because the use of DOM storage has been disabled in the current browser settings. In order to load the form, DOM storage must be allowed.”
But using Firefox I was able to access the edit form , so can anyone advice on this please?
Thanks. Tools > Internet Options > Privacy Tab > Advanced
Check the over-ride box to Enable/Accept cookies. Click on Always allow session
cookies.
2. Clear Your Cache and Cookie Files
If you are using an Internet Explorer browser, please follow these instructions to clear
your cache and cookie files: Open your Internet Explorer browser.
Tools > Internet Options > General > Browsing History
Click Delete Browsing History.
Delete Temporary Internet Files, Cookies and History Also under Browsing History,
click Settings and make sure that your browser automatically checks for newer versions
of stored pages. Click OK and restart your browser
3. Pop-up Blockers
Turn Off the firewall in IE.
you can disable\enable it from below:
http://webdevwonders.com/clear-dom-storage/
Clear DOM Storage in Firefox:
Select “Tools” -> “Clear Recent History”, open “Details”, check “Cookies” and select “Everything” as time range.
ATTENTION: No other time range will clear the DOM Storage. Have a look at
Mozillas documentation for further info.
Disable DOM Storage in Firefox:
Type “about:config” in your address bar and hit enter to view your internal browser settings. Scroll down to „dom.storage.enabled“, right click on it and hit „Toggle“ to disable the DOM Storage.
Clear DOM Storage in Internet Explorer:
Select “Tools” -> “Internet Options” -> “General” -> check “Delete browsing history on exit”, click on “Delete”, check “Cookies”, click on “Delete” once more and restart your browser afterwards.
Disable DOM Storage in Internet Explorer:
Select “Extras” -> “Internet Options” -> “Advanced” Tab -> Go to “Security” -> uncheck “Enable DOM-Storage”
Clear DOM Storage in Chrome:
Select “Tools” -> “Clear browsing data…”, check “Delete cookies and other site data”, select “Everything” from “Clear data from this period” and click on “Clear browsing data”.
Disable DOM Storage in Chrome:
Open “Options” and select “Under the Hood” Tab. Click on “Content settings…”, select “Cookies” and set “Block sites from setting any data”.
If this helped you resolve your issue, please mark it Answered
ok i did all these steps but still i am getting the same error,, i can not understand how SharePoint works better on firefox and chrome comparing to IE !!! so what i should do now , as all the edit forms that are customized using Info path can not be viewed
on IE 10 64x !!!! -
i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled....... -
Trying to upgrade server 2012 with RDS role on it, to server 2012 R2.
It stays for a while on step "Collecting files, settings, and applications 0%"
and then returns the error:
Error upgrading: Setup can't continue. Restart the computer and restart Setup. When prompted, try getting the latest update
Installed all the latest updates, rebooted, also tried to to run setup with local admin, still the same.
Setup logs contain user profile related errors:
[0x08039d] MIG Cannot add mapping for user profile C:/Users/Administrator.001. Error: 32: Win32Exception: The process cannot access the file because it is being used by another process. [0x00000020] __cdecl Mig::CIndirectKeyMapper::CIndirectKeyMapper(class
UnBCL::String *,struct HKEY__ *,class UnBCL::String *,class UnBCL::String *,int,int,const Mig::HiveLoadRetryOptions *)[gle=0x000000cb]2014-08-17 03:30:13, Error [0x080801] MIG User profile loading error. Aborting
due to external request.[gle=0x000000cb]I was able to get past "Collecting files, settings, and applications 0%" by disabling user profile disks, but then on reboot I got another error:
Setup can't continue. Your computer will now restart, and your previous version of Windows will be restored.
Setuperr.log
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:34, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:37, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:40, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:01:44, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:11:43, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-08-17 04:11:46, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-08-17 04:15:12, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2014-08-17 04:15:23, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2014-08-17 04:15:23, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2014-08-17 08:52:44, Error Mig::CUpgradeTransportPlatform::SetUserContext: Offline platform failed to set the user context
USER00000000[gle=0x000000cb]
2014-08-17 08:52:44, Error MIG Mig::CKnowledgeManager::BeginProcessingContext: Source platform failed to set the user context USER00000000[gle=0x000000cb]
2014-08-17 08:52:44, Error MigApply caught exception: Win32Exception: Can't switch to requested user context: USER00000000.:
A device attached to the system is not functioning. [0x0000001F] int __cdecl Mig::CKnowledgeManager::Apply(class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CPlatform *,class Mig::CUserMappingList *,class UnBCL::Hashtable<class UnBCL::String *,class
UnBCL::String *> *,class Mig::CAgentManager *,struct IMigExecuteProgress *)[gle=0x000000cb]
2014-08-17 08:52:44, Error MIG pDoOnlineApply: Apply operation failed. Error: 0x00000004[gle=0x000000cb]
2014-08-17 08:52:44, Error [0x0802f5] MIG CMediaManager::Close: m_pSelectedTransport->Close(1) failed with Exception Win32Exception: Device was open with readonly access.: Access is denied. [0x00000005] void
__cdecl Mig::CMediaManager::CloseTransport(int)
void __cdecl Mig::CUNCTransport::Close(int).[gle=0x000000cb]
2014-08-17 08:52:44, Error MigCloseCurrentStore caught exception: Win32Exception: Device was open with readonly access.:
Access is denied. [0x00000005] void __cdecl Mig::CMediaManager::CloseTransport(int)
void __cdecl Mig::CUNCTransport::Close(int)[gle=0x000000cb]
2014-08-17 08:52:47, Error MIG Callback_ApplyNewSysMachineSpecific: Migration phase failed.
Maybe you are looking for
-
Mapping issue in idoc to JDBC scenario
mapping issue in idoc to JDBC scenario source structure E1KNB1M BUKRS = 1000 E1KNB1M BUKRS= 9000 E1KNB1M BUKRS= 2000 THE NODE E1KNB1M is repeated many times and the field BUKRS is also repeated with E1KNB1M as above TARGET field : ISFRANCHISE
-
Server almost out of Storage Space
Running a Dell PowerEdge F710 and am almost out of Free space on the drives. Looking for software that will provide me with real time space use so I can prepare to show how much time till we are out of space. Sorry for the general question... new jo
-
Hey all, looking for a little advice. My elderly mother's 350, on which I installed 10.3.9, has been running maddingly slowly. The hard drive (Quantum fireball 6.8 gig) whirs and clicks (no high-pitched whining) a lot, and the pinwheel of frustration
-
Migrating data without losing anything
I need to use Migration Assistant with Firewire cables to copy data from a Macbook Pro using SnowLeopard to a MacBook Pro using Lion OX. The computer I'm copying too (the one using Lion) has many programs on it that I don't want to lose – they will n
-
How to Upgrade Solaris Package ?
Hi, I created a solais package (*.pkg), which I've installed with the following command: "pkgadd -d mypkg.pkg" 1. What command should I use in order to upgrade it to a higher version? 2. What are the changes I have to do in the installation pkg for s