Disable the AirDrop confirmation dialog?

I frequently use AirDrop to transfer files between iMac and MBA. Is there any way to disable this annoying confirmation dialog, as I am on a secure home network?

Thanks for your input. I currently have both iMac and MBP set to share over the network, but they seem to only want to connect about 50% of the time...when they don't want to communicate, I can usually use AirDrop, I just would prefer to skip the confirmation dialog (I know you can set the Shared Disk setting to not ask for confirmation)

Similar Messages

  • Disable trash emptying confirmation dialog

    Is it possible to disable the confirmation dialogue that pops up every time I have to empty the trash bin? It would make my work flow faster.

    it still displays even with that turned off
    [img]http://img.skitch.com/20100429-rc2441gcx5axrbc6b25xp2gkm5.png[/img]

  • How to disabled the input parameter dialog box in crystal reports 9

    Post Author: Murtaza
    CA Forum: General
    Hi friends,I have got stuck with a weird problem.  In my
    crystal report, I have set up some input parameters.  I am setting
    values for these parameters somewhere inside code.  But I don't
    want to show the default input parameter dialog box. Under any case,
    user should not see the ugly parameter dialog box that crystal
    presents.   Please suggest me how I can achieve
    this.  I cannot do this through code, because our environment does
    not allow that.  I have to do this in crystal reports viewer and
    by setting some property of the crystal report object. But everything
    must be done on UI, not through code. So, the solution should not be the following. 
    // step before step 1
    // **** the line needs to refer to the report and be set before setting
    ReportSource in the viewer to myReport
    myReport.EnableParameterPrompting = False
    Any help would be greatly appreciated.  Murtaza

    Post Author: sleahcim
    CA Forum: General
    Hi Murtaza,
    Unfortunately, I am not aware of any method to suppress the prompt for the input parameters, but still use them.  It is truly a design-related issue for the report.  The reason that the prompt appears is because the parameter it is prompting for is used in the report; in particular either the Group or Record Selection, or referenced in another formula.
    The only way I can think of to not show the prompt, is to not use the parameter in the report.  You did mention that you are setting the value of the parameter inside of the report -- are you doing this through using a formula?  Perhaps you can just remove the parameter and only use the formula that you are setting the default values with.
    -Michael

  • Disable the "lock confirmation windows on this page"

    The firefox is sending the message "windows to block the confirmation of this page" every time you clicked a button on a web page and this button will open a new window.
    I would like to disable this confirmation "confirmation windows block this page" at all times firefox does this question when I try to open a window on a web page.
    In version 3.5 did not have this message after it started with version 4.

    Hi, cor-el.
    Yes, I want remove it or disable it, if it's possible, because I don't want block my modal windows or alert boxes of my web applications.
    It's necessary open the modal windows and alert boxes many times to guide my customers on my web forms. That's way to help them finish the job easily.
    Thank you very much.

  • How to disable the "GETTING PLAYLIST" dialog box that appears in Radio

    In itunes radio playlists, I click on a station and a message appears in a box, centered on the monitor screen that says "getting playlist" along with a blue striped status bar. I wonder if I can get rid of this annoying thing.! Because I know it is getting the playlist; I just clicked on a station. Why do I need to have this box sit on top and in the middle of my other applications?
    Is there some genius out there who knows an answer?!

    I don't think there's anyway to disable it, I just minimise iTunes or click on another application's logo while it loads. I agree with you as to it being annoying, but I don't think there's anyway to disable it. In my opinion it should just do it in the background without the dialog box...!

  • How to avoid the "Save As" dialog when using "Close Button"

    Hello All,
    I am facing a problem while closing a pdf file.
    I am using the following code to Open a pdf file.
    CAcroApp objAcroApp = new AcroAppClass();
    CAcroAVDoc objAVDoc = new AcroAVDoc();
    objAVDoc.Open(C:\\new.pdf,Sample);
    objAcroApp.Show();
    After opening the document I am **** some changes (adding markup) in the file.
    Then I am closing the file using the Close Button and in YES for the save confirmation dialog.
    Here is the problem.
    After giving YES, I am getting a Save As dialog with "Sample.pdf" in the FileName box.
    I am getting this only in Acrobat 9.0.
    When I tried the same in Acrobat 8.0 I didnt get Save As dialog. It saved with out "Save As" dialog in "C:\\new.pdf".
    I need to give the same behavior in both Acrobat 9.0 and 8.0.
    Please help me out to fix this issue. Thanks in advance.
    Regards,
    Mohd Mustafa SK

    In what you have posted, there is no reason it shouldn't work the same way in Acrobat 9. I would recommend that you submit your complete application to developer support.

  • Confirm Dialog (JavaScript)

    Hi,
    I'm using the JavaScript confirm dialog attached to a button (return confirm('xxxxxxxxxxxxxxx').
    It works fine but I need two things:
    1. How can I change the window title?
    2. How can I change the titles of the two buttons? (I need them in Spanish).
    Thanks a lot for your help

    Hi!
    As far as I know, there is no possibility to change title of standard dialogs like alert, confirm etc. You can use window JavaScript object and set title in it's parameter name.
    And since JavaScript is realized in browser, it seems that change of your locale should change button's title to language of locale.
    Thanks,
    Roman.

  • Eliminating delete confirmation dialog

    Is there any way to eliminate the delete confirmation dialog in Finder? When I remotely browse the files on my iMac from my MacBook, I occasionally want to delete one. But I always get the popup dialog "Are you sure you want to delete the selected items?"
    Of course I'm sure. Besides, I have backups if I need them. How can I eliminate this nag message?
    Thank you!

    Press Command-Option-Delete
    http://www.macworld.com/article/143594/2009/10/networkdelete.html
    Message was edited by: Martin Pace

  • How to disable confirmation dialog when making connection??

    Hi,
    I am trying to use the BT interface on the cell phone to connect with another BT device. However, when the connect.open() fuction is called, a dialog asking for confirmation of the connection will show up. Is there any way I can eliminate the dialog and just establish the BT connection when another device directly when the connect.open() method is called??

    Hi,
    >>however I do not want to see the confirmation message each time data is submitted,  because my loop is paused each time the confirmation message appears, and the only way to resume it, is to click "ok". 
    Sorry, disabling the confirmation message is not possible.  The confirmation is always enabled.
    Thanks,
    Lucia

  • How do you disable the menu asking to confirm putting file to remote?

    I am utterly perplexed by this function.
    When I have check files in /out DISABLED I get this menu asking me to confirm that I want to put a file on the remote because someone else has the file "checked out"
    When I have file check in and out ABLED I get this same !@#E@!~ message.
    I am the ONLY one servicing this website. so why !@$@# am i getting this message telling me that the remote file has changed and that I need to confirm putting the file there.  whats the deal?
    i get asked this if i have check in/out DISABLED and if I have this function ENABLED.
    what can i do to GET RID OF THIS MENU request?  its SOOOOOOOOOOO irritating!
    help! thanks!

    Actually it does not matter whether check in/out is ENabled or DISabled. the same pain in the *** menu problem happens.
    this is the menu i get when it is DISabled
    “X is currently working on www/program/pr_index.php (Please enable Check In/Out in the Site Definition dialog box to avoid overwriting changes made by other users.) Do you want to upload the file anyway?”
    It then gives option:
    Yes, yes to all. No. no to all. Cancel.
    If I click yes to all. It will put it to the remote. Then I can immediately try to put the same file once again to remote and I will then again have to go through this SAME ROUTINE.
    Thus in other words, even with check in/out DISabled I get this message about using check in and check out that is just ridiculous.  Especially because I am the only person EVER editing the website. So how can this seriously possible?
    Thanks for your thoughts on this.

  • How to disable the reminding dialog when close the webi report viewer

    Dear all
    How to disable the reminding dialog when close the webi report viewer
    Background
    When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
    But customer need to disable this dialog, and can clost the report viewer directly.
    So is there any ways to modify this?
    I think it shoule modify some .js file under tomcat, but can not find the solution.
    Thanks a lot, any information woulde be appreciated.
    David Zhang

    I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
    It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
    I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
    MANY thanks mende1 for the answer on how to fix it.

  • How to get  the choice clicked by the user on a Confirmation dialog?

    Hi,
    'm trying with Confirmation dialog which should return
    'yes', 'No', or 'Cancel'
    I wrote like:
    String Message="Do u want  to update ??";
         IWDControllerInfo controllerInfo = wdControllerAPI.getViewInfo().getViewController();
         IWDConfirmationDialog dialog =wdComponentAPI.getWindowManager().createConfirmationWindow( Message, controllerInfo.findInEventHandlers("Yes"), "Yes");
         dialog.addChoice(controllerInfo.findInEventHandlers("No"),"No");
         dialog.addChoice(controllerInfo.findInEventHandlers("Cancel"),"Cancel");
         dialog.open();
    It works as a normal dialog window
    But how can I get the choice that is clicked by the user.
    ie . either 'Yes', 'No', or 'Cancel'.
    can any body help me
    thanks
    Smitha

    Smitha,
    In addition to your code, create 3 event handlers in your controller, name them Yes, No, Cancel. In every event handler you know what event was fired, i.e. what button is pressed.
    Valery Silaev
    EPAM Systems
    http://www.NetWeaverTeam.com

  • Disabling the Open button in the JFileChooser dialog

    Hi,
    I would like to enable/disable the Open button in the JFileChooser dialog, after the dialog is shown.
    I looked at the Java APIs but I could not find a method that gives me the access to this button.
    Could anyone let me know how to either retrieve the Open button from the JFileChooser or enable/disable it through Java APIs?
    Thanks in advance,
    Paul Rodziewicz

    As I'm editing with multiclips in my sequence, if I select "open" from the middle pulldown menu in the canvas or viewer, it will open the multiclip in the viewer and play it in sync with my timeline playhead (like the gang feature). I.E. so I can hit play in my timeline, watch the multiclip in the viewer real time, and make edits (to the clip in the timeline) as I watch. My issue is that the syncing of the viewer playhead and the timeline playhead often break when deleting clips and I constantly have to reselect the "open" button, and it would be way nicer if there was a shortcut key instead of having to mouse it. It only takes a second to use your mouse and select "open" but when you have to do it constantly, it makes you wish for a quick key.
    img src="http://a960.ac-images.myspacecdn.com/images01/47/l_b06e2e3aee5446928b2daca d1d04520f.jpg" align=left width=600 height=463 alt="pic1">pic1
    img src="http://a672.ac-images.myspacecdn.com/images01/60/l_979388c01dd9880126c0fbd 8f5ab49f7.jpg" align=left width=600 height=485 alt="pic2">pic2

  • HT204291 I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for

    I cannot find the AirPlay icon for the life of me. I have iOS 7.0.2 on my iPad Mini. Connected to my WiFi network just fine. I swipe up to get to the control center badges and all I see is the AirDrop icon. Trying to disable mirroring on ipad for Netflix streaming and don't know what to do. Any luck out there?

    If you last used an Apple TV to mirror your device and have updated to the newest Apple TV software, go into settings and turn airplay back on. The icon should then appear on your iPad mini when you swipe up allowing you to disable it for Netflix. After updating my Apple TV software for some reason it turned airplay off.
    Bob G

  • How do I stop the "Confirm Dialog Preference" box from appearing everytime I load a page?!

    Every time I a go to a new page, whether it is the same site or not, I get a dialog box that appears that reads "Confirm Dialog Preference," and the options include yes or no. How do I get this to stop? It is really, really annoying.

    Can you attach a screenshot showing the dialog?
    Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
    How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile

Maybe you are looking for

  • My apple ID is not working on my iPhone

    My Apple ID is not working on my iPhone.  Help! 

  • Spelling temporarily disabled???

    At the top of the InDesign forum page, one finds this: ANNOUNCEMENT: File Attachements temporarily disabled Show Details Would advise turning on spell checking...

  • Cannot deserialize array in Netscape 4.7

    Im trying to deserialize an object that has been assed from servlet to applet with an int[]. When i execute (int[])is.readObject in Netscape (in MSExplorer works fine) the error in java console is: java.lang.NullPointerException at java.io.ObjectInpu

  • Mac Mini Server HDD raid failure help

    My server has been running for years, perfectly, most of the time. It is set up as a mirrored raid set. I noted today that the second HDD is displaying a "failed" red flag in disk utility. I attempted to Rebuild and that failed. In the FIRsT aid tab

  • Run tasks asynchronously at boot

    [robin@pingwing ~]$ systemd-analyze blame | head -n 5 3.595s updatedb.service 1.403s man-db.service 196ms [email protected] 185ms systemd-logind.service 166ms alsa-restore.service updatedb and man-db are run every time the system boots (or only the f