Disable the finger print scanners

how do i disable the finger print scanners...I think they are slowing my system down quite a bit.
Thanks!

Go into the device manager under personal identification devives, right click and disable.

Similar Messages

Can two people use the finger print reader on the same computer

I can not get the finger print reader work for me. My wife can use it, but I can not get registered.

Hi,
Based on the following link, you need a different account to be able to register your fingerprint, the rest should be the same:
http://bizsupport1.austin.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c01471790&printver=tru...
Can multiple people log into the same PC with the fingerprint reader?
Yes, multiple people can log into the same computer with the fingerprint reader if each has their own user account.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

When I lock my screen I can't slide it to unlock I can unlock by the finger print but once on home screen I can swip or press any apps

When I lock my screen I can't slide it to unlock I can unlock by the finger print but once on home screen I can swip or press any apps

Try holding the Power and Home button until the phone powers off and the Apple logo appears
No data will be lost

Will the iPhone 5 have the finger print scanner?

I recently bought an iPhone 5 not knowing that the 5s is coming out and I wanted to know if the iPhone 5 will have the finger print scanner on the next update.

A software update will not change the hardware in your phone.

Is it possible to turn off the finger print sensor?

Right now I am not sure if I buy the new iphone 5s.
The finger print sensor make me worry!
Is it possible to switch it completely off?
Maybe like SIRI - during installation you can say, I don't want to use it!
Thanks for your help and sorry for my bad english!

Thanks for your fast reply!
Thats perfect! Now I can order the new iphone without my concerns!
Thank you very much!
Have a nice weekend!

Have a new 5s iPhone how do I set up the finger print ID?

My new 5s phone how do I activate the finger print ID?

It's under settings. However you still use the 4 digit code sometimes. Set up finger print. Turn screen off and then turn screen on. U should see a lock screen. At that time hold your finger on the home button for three seconds. Screen should unlock using finger print.

Can the Finger Print Reader be used for the Hard Disk Password at Power-On Boot Time on the W700?

I own a W700 and I have enabled the Hard Disk password at boot time (I have 2 HDDs, so there are two password prompts).
I always type in the passwords, but was wondering if the Finger Print Reader can be used instead?
The Finger Print Reader works fine from Windows 7 logon onwards, but it would also be nice to use it at system boot time, after powering on.
Please let me know if this is possible.
Thanks!
Solved!
Go to Solution.

Sorry I did not get back online quick enough...but the passwords are the same.
For some reason, after my first cold boot, I was still prompted for the hard disk passwords. I powered down again and when I powered back up, it signed me on all the way through. So it was just a hiccup.
All is good now and I'm very happy!
Thanks for pointing me in the right direction.

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

It has been not more than 10 days since i bought iphone 5s 32gb and the finger print scanner is not detecting the prints.what to do??is it an issue with the device or iOS??

Standard practices:
Restart the device (power off completely, then back on) - retest.
Reset (hold sleep wake and home buttons until apple logo appears) - you can try this, but it is most useful when your device is frozen.
Restore to factory settings - retest.
Make an appointment at an Apple retail store genius bar if the above did not resolve the issue.
HTH.

The finger print scanner doesn't work 90% of the time please help! I have tried everything.

Dose any one else have problems with the iPhone 5s finger print scanner??
I've tried rescanning, different fingers, scanning different ways. But 95% of the time it just won't work. It is soooo frustring!! I would have saved a bunch of $ and bought a 5 or 5c if I wanted a phone that didn't fingerprint scan. has any one got advice that can help? It would be appreciated. I do work with my hands ( manual labour) but it's not like I tear up my fingers every day. Any help would be appreciated.
Peter.

If any one is still reading this thread you would know that I've been having problems with my finger print scanner. Well it turns out that the issue is not with the 5s but with my fingers. My fingers are too big for the scanner, so if your having trouble with your scanner try using just the very tip of your finger. I did a lot of research on my issue and found nothing suggesting this. My brother had the idea that this might be the problem and turns out he was right. Since rescanning the tip of my finger I have 100% success rate and am very happy with my new phone. Thanks again for all the help I got from people on this issue.

Does HP sell a USB extension for the finger-print reader in an Elitebook 8540p?

I have an Elitebook 8540p. I can use the fingerprint reader to log in to Windows when the screen is open. However, when the laptop is 'docked' the screen is closed, covering the built-in finger print reader. Does HP sell a USB fingerprint extender or adapter which would allow me to use the biometric sign in when the laptop is docked?

I am sure they are the correct drivers, they worked with the system when it was an "HP" version of Windows.
The screens work for me, here they are again:

8.1.2: is there any way to disable the new 'printing attempt' alert triggered by javascript print ?

Hi,
i've been using the embedded javascript print function with the silent interaction parameter to make a PDF file printed as soon as it's opened without any user iteraction, until this annoying new 'protection' implemented in 8.1.2.
is it possible either in adobe reader options or in embedded javascript to have such a workflow-friendly behavior back in version 8.1.2 ? thanks in advance.
and please do not say that this 'feature' was added to save trees and world climate :p

hi
if my understanding is right you want to disable the users for 2 days for any reason let say he is on holiday for 2 days then why dont u lock this user and submit the job for unlock after two days.
Khurram Siddiqui
[email protected]

I want to disable the wireless printer on my ipod touch

i want to disable the printer on my ipod touch

Just turn off the real printer.
Maybe I do not understand your question.

Is it possible to disable the test print for when printer turns on?

We sometimes shut the printer off, and other times have storms where power often flickers. Every time the printer goes back on it automatically prints a test page and eats up ink. We are not too happy about this. Is there a way to disable that? I can't seem to find it.

Matt - just tap and hold on the PDF (even though it rendered in the mail) and you will get the Open In option.

About The Finger print device Problem

I have a pavilion m6 notebook,a days ago i installed windows 8.1 on it.Now the fingerprint is not working
(It worked perfectly on windows 7)
When i touch the scanner this error comes..
please tell me it anyone know how to solve my problem!

Hi Indula,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion m6 Notebook and having an issue with the Fingerprint reader. Here is a link to download and install the Fingerprint Sensor Software.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Tecra M5: finger print sensor is not working properly since a drink was spilt into the keyboard

My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.

Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook.

Disable the finger print scanners

Similar Messages

Maybe you are looking for