Disable the multiple Logons in ECC6 and allowing few users

Dear All,
I need to disable the multiple Logons in ECC6 and allowing few users, can multilogin in system.
I have seen that the parameter login/disable_multi_gui_login and login/multi_login_users can be set.
But need to know did any once use in Ecc6 system and what values to be given in login/multi_login_users.
Please suggest .
Regards,
Kumar

I have found an exmaple on the web of using javascript (it opens a child window that polls the parent window, and invalidates the session if the parent window is closed). I agree there always appears to be loop holes around most of th e solutions i've come across.
I had the same idea about invalidating any previously known session for the same userid, I'm pretty new to the java/web app world so I'm struggling with finding the information I need. I couldn't find any methods to call to invalidate another session, I only came accross example where the current session invalidated its own session via call to the session object, do you have any idea how I would do that for other sessions.
Mant thanks for your input.
Derek.

Similar Messages

  • How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013

    Folks,
    How to Disable the Process Header, collapsible Area, and Process Warning Bar from Contacts Form of CRM 2013
    Thank you.

    Hi,
    You can deactivate the business process itself if you do not want at all. So that the header will not available for the entity.
    Regards,
    Priya

  • Since i have upgradet my ipod touch 3g with the new 5.0.1 version,  i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is the 10.5.3 ... please help me!

    since i have upgradet my ipod touch 3g with the new 5.0.1 version,  i can`t upload music or pictures or apps or anything else. the synchronize button is gray and allows nothing. the i tunes version is  10.5.3 ... please help me!

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • Limited-access user permission lockdown mode and allowing anon users to view list items

    I'm working on setting up a public-facing SharePoint website that will need to support anonymous user access. I'm using the Enterprise Publishing Portal site collection template, so the Limited-access user permission lockdown mode feature is turned on.
    Everything is working great, except allowing users to view a list item. One of the key features I was hoping to leverage was the ability to display custom lists on a web page using a List View web part. Then they could click on an item and see the DispForm.aspx
    so the item's content was accessible, including any file attachments.
    A real-world example is adding an RSS viewer web part to the home page and allowing anon users to click on one of the events to see the details of it. Currently, in lockdown mode, the users gets an authentication prompt. 
    I toyed with the idea of turning the lockdown feature off. However, I'm uncertain of the full impact that would have on security. For example, I know it will allow anonymous users to see who created and modified an item, which we don't want exposed to the
    public (i.e. our employee names). Seems like opening a can of worms by disabling the lockdown mode... 
    Any ideas on how to tackle this would be greatly appreciated.

    So far, this is the most promising solution I've come across:
    http://soerennielsen.wordpress.com/2012/05/29/how-to-make-list-items-visible-to-anonymous-users-in-search

  • How to disable the validity of a particular Role for 100 users, in a single

    Hi
    How to disable the validity of a particular Role
    which is assigned to 100 users. (disabling the role of change the validity of the role )
    at present am doing manually, by entering into each user and changing the validity of the role
    Thanks.

    > How to disable the validity of a particular Role for 100 users, in a single ...
    ... shot?
    Assign a reference user to the 100+ users and create events in the factory calendar which assigns and removes the role from the reference user only.
    The downside is that it is not scalable for many of the same concepts at the same time, because a dialog user can at one logon time only have one reference user assigned to them.
    Cheers,
    Julius

  • I uploaded music in the match and when i want to play it in my phone, some of the tracks appear blocked (blanked) and a few not. When I'm connected through a wi fi spot, i can play all of the tracks. Help!

    I uploaded music in the match and when i want to play it in my phone, some of the tracks appear blocked (blanked) and a few not. When I'm connected in a wi fi spot, I can play all of the tracks. Help please.

    Hi,
    You need a wifi connection to stream. Previously played tracks appear in a temporary cache which allows them to be played again when yOu have no wifi..
    You can either predownload selected tracks or use cellular data.
    Jim

  • [svn:osmf:] 10364: Latest updates to the Dynamic Streaming sample app , and a few bug fixes.

    Revision: 10364
    Author:   [email protected]
    Date:     2009-09-17 14:49:03 -0700 (Thu, 17 Sep 2009)
    Log Message:
    Latest updates to the Dynamic Streaming sample app , and a few bug fixes.
    Modified Paths:
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/.project
        osmf/trunk/apps/samples/framework/DynamicStreamingSample/src/DynamicStreamingSample.mxml
        osmf/trunk/framework/MediaFramework/org/openvideoplayer/composition/ParallelSwitchableTra it.as
    Property Changed:
        osmf/trunk/libs/adobe/NetMocker/
        osmf/trunk/libs/adobe/StrobeUnit/

    Thanks 
    Now we can call and game at the same time
    Life is a train. You can choose your path choice, but you can not choose when the track will end...
    Where will the track take you?
    If my post has answered your question. Please mark it as an answer.

  • Disabling the unlimited Lifetime option in Cisco WCS Guest User Creation

    Is there  a way to disable the unlimited Lifetime option in Cisco WCS Guest User Add/Schedule tab.If i make those fields uneditable, it just takes out the option to schedule any meetings in future.Using Cisco WCS version 7.0.220.0.

    i'm also searching for an solution to disable the unlimited lifetime button for the Lobby Ambassador.
    could it that Cisco introduces this maybe a future release?
    couldn't be that there are only few people who are disappointed with this solution.
    My Customer is thinking now that cisco isn't the right solution for him.

  • I want to disable the DHCP server on HH3 and use l...

    Hi, i live in a flat with 5 other people so i have my HH3 connected to a linksys wrt5gl so that i can use the QoS capbilities of the linksys (tomato firmware). The linksys router can also limit bandwidth per ip address IF its also the DHCP server. When i disable the DHCP on the HH3 and enable it on the linksys the internet no longer works on any of the PC's, but if i have the DHCP on the hh3 i cannot limit bandwidth per ip on the linksys.
    In the flat before this i managed to set this up fine (wasnt with the HH3- some other router) just need some advice on how to disable DHCP on the HH3 and enable it on the linksys wrt5gl whilst still being able to connect to the net.
    Here is how its set up atm:
    Phone line>>>HH3 (assighns IP through DHCP)>>>Linksys (data goes through QoS)>>>PC's/laptops/consoles in flat
    Here is how i want it set up:
    Phone line>>>HH3 (Acts as a modem)>>>Linksys (assighns IP through DHCP to allow bandwidth limiting /data goes through QoS)>>>PC's/laptops/consoles in flat
    thanks in advance, sorry if this is hard to understand- im not so good at putting the problem into words
    Solved!
    Go to Solution.

    Hi,
    Don't know to be honest......but as an idea....you will have to disable DHCP server on the hub, apply a static ip to the Linksys, 192.168.1.100. You'll then need to set up DHCP on the Linksys....start ip 192.168.1.64 end 192.168.1.253, you'll need to add a subnet 255.255.255.0, then the gateway.....192.168.1.254 that's the ip address of the HH and that could be the real problem as normally the default gateway for DHCP on routers is the routers ip address.
    So the chandes of it working are slim.....however you dont have to use your HH on your BT broadband you can use another make/model. 
    One option to use with that router is a Draytek 120 ADSL modem, which does PPOA to PPOE.

  • How to block the multiple logons with NWBC?

    Hello,
    With Sapgui we have the possibility to prevent the multiple dialog logon by profile parameters (login/disable_multi_gui_login).
    How to prevent the multiple dialog logon using NWBC to the same system?
    Best regards
    Frédéric Blaise
    e-Kenz S.A.
    Luxembourg

    Hello,
    I opened a ticket at Sap but unfortunately they do not have a solution even if the problem is known.
    "Unfortunately, due the HTTP protocol nature, is not possible to force a single logon via web browser. The profile parameter login/disable_multi_gui_login is solely valid for SAPGUI logons."
    "Since this case is known since the Web Application Server was created, I am pretty convinced that SAP knows about the fact that multiple logons cannot be blocked (you can only give a warning for the user)."
    Since we monitor multiple connections with the SM04 transaction and notify customers that they may be controlled by Sap.
    Best regards
    Frédéric

  • Need to disable the clearing of browsing history and what is the "about:config" function for it?

    I am working on an Group Policy Administrative template for Wetdog.exe, and it's awesome by the way. Just want to know what function to use (listed in "about:config" url) so i can turn this feature off entirely.
    I don't want my users deleting browsing history, or have any ability to view it either.
    Still, i want the browser to keep at least 30 days of history.
    This is EASILY accomplished in Internet Explorer via GPO, but not so much in Mozilla with wetdog.exe and it's admin templates. I am using Windows Server 2003 enterprise edition R2 on 2 domain controllers, and Windows XP Professional SP3 client workstations with Mozilla 3.6.3 and the latest version of Wetdog.exe and it's admin templates.
    Any help would be much appreciated!!!
    == This happened ==
    Every time Firefox opened
    == My boss decided that we need to keep browsing history locked out of our existing 700+ workstations ==
    == Troubleshooting information ==
    just need to disable the "history" button, the "tools\clear recent history" button, and "tools\options\privacy tab\history"

    It can be annoying, but I think their motivation is good.  They are trying to make things better for their customers and I think they have, even though sometimes it is annoying.  I think it would be nice if they would advise us when the pages are going to be down for maintenance,  In the mean time, you could have another E mail account so you can always get access to your E mail.

  • How to disable the popup bar that won't allow redirecting of pages?

    I want to be able to disable the 'redirect bar' when I want to!!!!!
    Annoys the heck out of me when trying to view something.
    Just get it to '''''shut up''''', please.....

    See:
    * Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    * http://kb.mozillazine.org/accessibility.blockautorefresh
    * https://support.mozilla.com/kb/Options+window+-+Advanced+panel#General_tab

  • MSI installation, how to disable the online functions (like Cloud and login)?

    How can I disable the online functions which need a login with the adobe id? I want to do this while I install the Adobe Reader DC with the MSI installer.

    Hi Yannic,
    I can understand your concern, however Document Cloud is a core part of Adobe Acrobat Reader DC and Adobe Acrobat DC so it cannot be disabled. If you don't want to use this feature then you don't need to sign in.
    If you really feel that this does not suites your requirement then you can uninstall it & re-install Adobe Reader 11 Adobe Acrobat Reader DC Install for all versions.
    Let me know if you have any further queries.
    Regards,
    Aadesh

  • How to disable the menu bar from hiding and fix screen?

    I've looked thoughly to find the answer online, system preferences and here with no luck. I recently updated my software to Mac OS X 10.7.4. Now the menu bar is automatically hiding, but reapearing when I mouse over and the screen in all windows are too wide and long. When I click the 'green' icon for resizing the window, it sizes it too wide and long. I am not in full screen and do not have enlarge on (COMMAND +) and i've check the display settings. Maybe Mac added this as a feature with the update thinking people will like it but I don't like it at all, my typing in an email is not visable on the right. Can someone please tell me how to turn this feature off? Also the resolution/clarity of my screen is not as good since the update. It is not much of a difference but enough to make my eyes hurt a bit.
    thanks for your help!

    Yes it is Aluminium. Yes I checked that it is set to 1280 by 800 and changed the resolution and changed it back many times to see if that would help. Is this not a new feature with the new OS X update? Thanks

  • My iPod has two small dots on it. The first one is red and the other is white. The red one came first and a few weeks later the white one showed up. Can I take it to the Apple store and have it exchanged?

    I've had it for less than a year and noticed a few weeks ago that it had a red dot on the center of the screen. About a week ago I noticed another dot, a white one, right next to it. I've never dropped it and even went out of my way to buy a decent case to keep it safe. I spent over 200$ on my 4Gen iPod Touch it and I'm very concerned that these dots will spread across my screen. Can I send it to the Apple store by me and have it replaced?

    Make an appointment at the Genius Bar of an Apple store and find out. If defective, within warranty and not abused Apple may exchange it at no cost.
    See:
    About LCD display pixel anomalies for Apple products released in 2010 and later

Maybe you are looking for