Disable the password for installations

How do I disable the password I'm always asked for EVERY app install?

I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

Similar Messages

What is the "password" for installer?

I'm trying to attach my HP printer wirelessly to my home net. It's a new Apple machine, of course.

What model is the printer?
Are you being prompted for a password when installing the printer on your Mac computer?
If so, this should be the same password you would use to log in to your OS X system.
At some point, this feature was added to OS X for an added measure of security. This prevents malicious programs from installing without any interaction from the user.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

I reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

i reset my disabled ipad 2 and it is asking me for the apple id which first set it up but i forgot the password for that apple id and the password/recovery information for the recovery email address. What can i do?

Click here and use Apple's iForgot service, or contact their Account Security team, or if you're the device's original owner, take it and its purchase receipt to a physical Apple Store.
(124525)

What is the password for 'oracle' user created during XE installation?

Hi,
What is the password for 'oracle' user automatically created when XE is installed?
I installed XE on Linux and it's created under 'oracle' user, but I don't know 'oracle' password. So, I cannot stop TNS listener.
During configuration, it prompted me to enter SYS and SYSADMIN password but it didn't ask me to enter 'oracle' user password.
Please let me know or point me to the document.
Thanks,
N

Hi Jari,
I tried your suggestion, but it didn't work unfortunately.
When I type (sudo su -oracle) as follows, it still prompts the password. When I hit Enter key w/o anything, it seems to proceed and the prompt shows up in the following line. So, I thought it was successful, but when I checked 'whoami', it's not logged in as 'oracle'.
So, I created the password for 'oracle' and logged in as 'oracle' using a new password. Then, I stopped TNS listener to uninstall XE.
It would be nice if it's documented in XE document somewhere... since it's created by XE installation, I assumed some kind of default password was used.
Thanks,
N

I cannot install mac os x snow leopard as i dont have the previous installation disk os x 10.5.8 and I cant remember the password for the mac. How can I install snow leopard.

Hi I have just received Mac OS X Snow leopard but when I tried to install it i couldn't as I have forgotten the password for the mac and I can't find the disk for OS X 10.5.8 its running on. Is there any way to install the new software without both of these?

you can reset your password. restart, and hold down Command-s before the apple logo appears (when the screen is white). you will see scrolling scripts until you see something like "root:" then type /sbin/mount -uw / to mount the disk. after that, type sudo passwd admin or whatever your admin password is. type in the new password two times. it doesn't show what you typed when you type the password so make sure you are pressing the right keys. after you done that, type exit to start up the computer. now you will be able to login with the new password.

Changing the password for OIM Database User

We need to change the password of the database user that created and user to run the prepare_xl_db.sh. I changed the <password encrypted="true"> to "false" and modified the password in the xlconfig.xml and restarted the app server but I can't log in. I get the below error. - what else is needed?
ERROR,30 Oct 2008 09:31:56,265,[XELLERATE.SERVER],Class/Method: XLJobStoreCTM/initialize encounter some problems: Error while connecting to Database. Please check if DirectDB settings are correct in Xellerate configuration file.
FATAL,30 Oct 2008 09:31:56,265,[XELLERATE.SCHEDULER],QuartzSchedulerImpl constructor Exception
org.quartz.SchedulerConfigException: Failure occured during job recovery. [See nested exception: org.quartz.JobPersistenceException: Failed to obtain DB connection from data source 'noTXDS': org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (ORA-01017: invalid username/password; logon denied
) [See nested exception: org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (ORA-01017: invalid username/password; logon denied
     at org.quartz.impl.jdbcjobstore.JobStoreSupport.initialize(JobStoreSupport.java:429)
     at org.quartz.impl.jdbcjobstore.JobStoreCMT.initialize(JobStoreCMT.java:131)
     at com.thortech.xl.scheduler.core.quartz.XLJobStoreCTM.initialize(Unknown Source)
     at org.quartz.impl.StdSchedulerFactory.instantiate(StdSchedulerFactory.java:753)
     at org.quartz.impl.StdSchedulerFactory.getScheduler(StdSchedulerFactory.java:885)
     at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.initialize(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.<init>(Unknown Source)
     at com.thortech.xl.scheduler.core.quartz.QuartzSchedulerImpl.getSchedulerInstance(Unknown Source)
     at com.thortech.xl.scheduler.core.SchedulerFactory.getScheduler(Unknown Source)
     at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.startScheduler(Unknown Source)
     at com.thortech.xl.scheduler.deployment.webapp.SchedulerInitServlet.init(Unknown Source)
     at com.evermind.server.http.HttpApplication.loadServlet(HttpApplication.java:2371)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4824)
     at com.evermind.server.http.HttpApplication.findServlet(HttpApplication.java:4748)
     at com.evermind.server.http.HttpApplication.initPreloadServlets(HttpApplication.java:4936)
     at com.evermind.server.http.HttpApplication.initDynamic(HttpApplication.java:1145)
     at com.evermind.server.http.HttpApplication.<init>(HttpApplication.java:741)
     at com.evermind.server.ApplicationStateRunning.getHttpApplication(ApplicationStateRunning.java:414)
     at com.evermind.server.Application.getHttpApplication(Application.java:570)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.createHttpApplicationFromReference(HttpSite.java:1987)
     at com.evermind.server.http.HttpSite$HttpApplicationRunTimeReference.<init>(HttpSite.java:1906)
     at com.evermind.server.http.HttpSite.initApplications(HttpSite.java:643)
     at com.evermind.server.http.HttpSite.setConfig(HttpSite.java:290)
     at com.evermind.server.http.HttpServer.setSites(HttpServer.java:270)
     at com.evermind.server.http.HttpServer.setConfig(HttpServer.java:177)
     at com.evermind.server.ApplicationServer.initializeHttp(ApplicationServer.java:2493)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1042)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
* Nested Exception (Underlying Cause) ---------------
org.quartz.JobPersistenceException: Failed to obtain DB connection from data source 'noTXDS': org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (ORA-01017: invalid username/password; logon denied
) [See nested exception: org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (ORA-01017: invalid username/password; logon denied
)]

During oim installation datasources are created to access the database.
So when you change the password for the database user you have to adjust the password in the datasources.

ITunes 10.1 installed but it disabled the driver for my DVD player

I installed iTunes 10.5.1.42 on my laptop HP PC and it disabled the driver for my DVDRW player. Before iTunes installation DVD player worked fine. After installation DVD player does not work, and is not see by iTunes or the computer. Device manager shows the player but indicates that the driver has been disabled.
I uninstalled iTunes and the DVD player worked. It also worked with iTunes 10.5.0. But then I reinstalled 10.5.1.42 with the same results--disabled DVD.
Anyone with similar problem or with suggestions???

some dvd players are very picky on what they will play some only
play dvd+r some only dvd-r some can't play dvd+rw and or dvd-rw
dvd burnable is a pretty fragmented std.

How can I disable the Keychain for an application?

How can I disable the Keychain for an application? A window pops up every time I open a page in Safari asking me for a password. I'm using a student laptop, so while I'm an administrator I lack access to a few things, such as the Keychain Access application. Is there any way to deal with this?

It's possible you may be able to trick it by creating an Applications folder in your Home directory and moving Safari to it.
I can't test this but it might work. The problem is that you would miss Safari updates, so you'd have to keep an eye out for them. Another solution may be to download another Safari and install in yourname/Applications.

Hi kids, my first day using apple, anyway, is a Power Book 4.1 , bought from someone else,and i dont have the password for the key chain, and no chances of getting it, the screen, for the password keeps on coming up, any ideas?

my first day using apple, i love it, is a power 4.1, older, but is ok to learn it, however, i bought it from someone , and i was not
given the password for key chain, so, this screen keeps on coming up, and i dont know the password, so i keep on canceling out
of it, ..... any ideas on how to fix this problem, is the key chain, that you can access through utilities, but i dont have the old password, that is my first
problem
my second problem is that the key board, closer to the screen, is coming out, as it needs to be put in place, you would imagine you can
put it back in place, but, not sure i should mess with it, any input would be greatly appreciated it
thank you
lisa

Hi, Lisa. Now I see what you're desperate about.
Does it allow you to go ahead and use the iBook after you cancel the Keychain login? If so, it's not a big deal.
Are you able to go to System Preferences > Accounts and create a new account for yourself? That should eliminate Keychain password problems.
Check out these instructions on replacing the keyboard:
http://docs.info.apple.com/article.html?artnum=111917
Maybe they will help you get it seated better. It's considered a customer-installable part, so it should be easy enough for you to handle without worrying about goofing anything up.
What CDs (if any) came with the iBook?
Which version of the operating system is it running?
How big is the hard drive and how much space remains available on it? If it's the original hard drive, it's getting very old and could fail at any time. The identifier "PowerBook 4,1" tells me that the iBook is ten years old, and is either a 500 or 600 MHz PowerPC G3 (Dual USB) iBook. As such, you can't expect a whole lot from it.
The optical drive on this iBook could be a CD-ROM (reads CDs only), CD-RW (reads and writes CDs; no DVD capability), DVD (reads CDs and DVDs), or Combo (reads and writes CDs; reads DVDs) drive.
Good luck with it.

TS3276 I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

I just upgraded to 10.8.2 and Mail is having a problem. It won't remember my password for getting mail; but it does remember the password for sending mail, i.e., smtp. Does anyone know of a fix?

The solution surprised even me, and we've been using Macs since 1984 (still have an original 128K).
I contacted Apple support, and because we had just upgraded yesterday, clicked on the "exception" button as opposed to paying the $19.99 one-time support fee. An Apple tech called and the problem was solved in two minutes.
Somehow during the installation of OS 10.8.2 (over 10.6.x) the key chain data for my email ISP login password got corrupted. The solution was to delete both the POP mail and SMTP entries in my keychain.
Back to Mail, it asked for the POP password, I entered it and bingo, mail got busy downloading. Interestingly, the password was also entered into the SMTP panel.
So, that's it. Thanks for you response, Mr. Hoffman, and regards.

I just buy a new iphone 4S, i wanna sync my data from 3GS to new iphone but i forget the password for the 3GS

i just buy a new iphone 4S, i wanna sync my data from 3GS to new iphone but i forget the password for the 3GS

Connect your 3GS in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

I tried to remember the password for the iPod and introduced several times and is now locked How do I open the lock

I tried to remember the password for the iPod and introduced several times and is now locked How do I open the lock

iOS: Wrong passcode results in red disabled screen: http://support.apple.com/kb/HT1212
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
iOS: Unable to update or restore

I forgot the password for my ipod

i forgot the password for my ipod. What do i do?

In the absence of any more information:
1. iOS- Forgotten passcode or device disabled after entering wrong passcode

I forgot the password for my i pad

i forgot the password for my i pad

If You Are Locked Out Or Have Forgotten Your Passcode
iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
iOS- Understanding passcodes
A Complete Guide to Recover Your iDevice if You Forget Your Passcode
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
Follow these steps to restore your device:
     1. Verify that you are using the latest version of iTunes before attempting to update.
     2. Connect your device to your computer.
     3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
     4. Select the Summary tab.
     5. Select the Restore option.
     6. When prompted to back up your settings before restoring, select the Back Up
         option (see in the image below). If you have just backed up the device, it is not
         necessary to create another.
     7. Select the Restore option when iTunes prompts you (as long as you've backed up,
         you should not have to worry about restoring your iOS device).
     8. When the restore process has completed, the device restarts and displays the Apple
         logo while starting up:
           After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
          to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
          iOS, keep your device connected until the "Connect to iTunes" screen goes away or
          you see "iPhone is activated."
     9. The final step is to restore your device from a previous backup.
If you can not restore your device then you will need to go to recovery mode.
Placing your device into recovery mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
     1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
         of the cable connected to your computer's USB port.
     2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
         red slider appears, then slide the slider. Wait for the device to turn off.
          If you cannot turn off the device using the slider, press and hold the Sleep/Wake
          and Home buttons at the same time. When the device turns off, release the Sleep/Wake
          and Home buttons.
     3. While pressing and holding the Home button, reconnect the USB cable to the device.
         The device should turn on. Note: If you see the screen pictured below, let the device
         charge for at least ten minutes to ensure that the battery has some charge, and then
         start with step 2 again.
     4. Continue holding the Home button until you see the "Connect to iTunes" screen.
         When this screen appears you can release the Home button.
     5. If necessary, open iTunes. You should see the following "recovery mode" alert:
     6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

Deactivating the password for the given user

Hi All,
I have used the FM SUSR_ZBV_USER_SEND for deactivating the user passwords . passed bapi method PWDINIT
the report which has been developed will deactivate the password for a given user in particluar sub system.
suppose if i am executing the report in ABC system and deactivated the password of a given user for XYZ system its working fine. However if i am trying the deactivate the password of a user in ABC system . its not getting deactivated.
please let me know what has to be done in order to deactivate the password if i am using the same systems.
Thanks & Regards.
Preeth.

Jeremy,
The default password for the Portal user in the same password as ias_admin. This would be defined at install time through the Oracle Universal Installer. However, if you're asking about identifying the Portal schema password in the database, you can login to the Directory Manager(assuming you're using Windows)and login as
cn=orcladmin
password: (ias_admin password)
Click on (entry management)=>(cn=OracleContext)=>(cn=Products)=>(cn=IAS)=>cn=Infrastructure Databases => ReferenceName=sid:host=>ResourceName=Portal. Click on the entry and look at the orclpasswordattribute.
Incidentally, you can also find the orasso password by checking the ResourceName=orasso.
Note:198800.1 on metalink would be a good resource to follow.
Thanks,
Sudi Narasimhan
Oracle9iAS Portal Partner Management
What is the default password for the Portal User in 9i AS Release 2? I'm assuming this is the equivalent user to the Portal30 user in 3.0.9?
Thanks.

Disable the password for installations

Similar Messages

Maybe you are looking for