Disable the xauth in IOS router for EZVPN client

I am trying to diable the xauth option and make the authentication by default not the interactive. I have tried using the username option, still its in the xauth interactive mode.Please can anyone help me out in this.

If possible, Can you post the current configuration from the router. If not, make sure that your configuration looks like the below:
crypto ipsec client ezvpn EZVPNCLIENT
connect auto
group TEST key TEST123
mode network-extension
peer 1.1.1.1
username cisco password cisco
xauth userid mode local
Let me know if it helps.
Regards,
Arul

Similar Messages

  • The version of iOS on does not match any of the versions of iOS supported for development with this installation of the iOS SDK

    Getting this error message as of this morning: The version of iOS on “iPad” does not match any of the versions of iOS supported for development with this installation of the iOS SDK. Please restore the device to a version of the OS listed below, or update to the latest version of the iOS SDK. I've downloaded the latest SDK and gone through the usual turn off and turn on again for iPad and computer, removed and reinstalled the iPad from Organizer and have no idea how to make apps build now. I was prompted to update the iphone too but there's no way I'm updating it if this issue can't be resolved.

    Okay these are the steps I took to solve the problem - they may not be the right ones for you but they've solved the problem and saved time hunting for some other solution. Firstly I changed my MAC system to Lion with the £20 download, then I deleted the old Xcode and installed the new version that is app based and doesn't support Snow Leopard, then all was well. I can now update my xcode via the app which is quicker and more logical and can update my iPhone rather than chug along avoiding updates as I need to update my existing apps on the app store and upload a new one.

  • IWork apps didn't requested a download in the opening of ios 7 for free like you said so on my ipad 4

    Work apps didn't requested a download in the opening of ios 7 for free like you said so on my ipad 4

    We are fellow users here on these forums, you're not talking to iTunes Support or Apple. When did you buy and activate your iPad ? The apps are only free for devices activated on or after 1st September which have iOS 7 installed.

  • After downloading the latest update IOS.8, for my IPad the Backup

    After downloading the latest update, IOS.8 , for my IPad the Backup  and Storage option under settings is no longer there

    The iCloud backup option has moved - it's now Settings > iCloud > Backup (it's towards the bottom of the list of items to back e.g. photos, mail, contacts, calendars ...  Backup, Keychain, Find My iPad).
    The storage option is Settings > iCloud > Storage (above the list of items to back up)

  • After downloading the new update ios 6 for the iPad , I can not find the YouTube app

    After downloading the new update ios 6 for the iPad , I can not find the YouTube app. Is there a way to get the YouTube app back?

    It's now not part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
     Cheers, Tom

  • Protocol Router for Rich Client Front Controller

    Hello,
    I would like to support multiple client types in my J2EE application - Web Client and Rich Client (Swing Application).
    Java BluePrints (Designing Enterprise Applications
    with the J2EETM Platform, Second Edition) suggests using a Protocol Router for centralized control in case of supporting multiple client types with multiple controllers - http://java.sun.com/blueprints/guidelines/designing_enterprise_applications_2e/web-tier/web-tier5.html.
    I have several doubts with this approach and will appreciate very much any help with clarifying the following:
    1) How does a Rich Client communicate to Protocol Router? Using HTTP? That means then that each request/response has to be wrapped in HTTP Request/Response object. It may impact the performance and make the communication between Rich Client and back-end slower.
    2) If rich client communicates with Protocol Router through HTTP, what is the difference between Fron Controller for Web Client and for Rich Client?
    3) The J2EE Tutorial on the other hand, shows direct connection from Application (Rich) Client to EJB layer - http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/Ebank.html.
    It will be greatly appreciated to know how would you address the above doubts.
    Best Regards.

    1) How does a Rich Client communicate to Protocol
    Router? Using HTTP? Yes, HTTP . You are right about performance issues. That protocol router seems to me like like overengineering. Anyway, I think a WEB service could be better choice. It's a standart way how to wrap remote requests in HTTP.
    2) If rich client communicates with Protocol Router
    through HTTP, what is the difference between Fron
    Controller for Web Client and for Rich Client?I think the difference is in types of requests. WEB client would request
    WEB pages, SWING client doesnt need WEB pages. It would request contents
    of list boxes and things like that.
    I would suggest you to use EJB's with session facade pattern. Provide WEB service style access to your app. Many app. servers provide feature to expose SLSB as WEB services. Thus you will support almost any types of clients (.NET, Perl, whatever). You can also use WEB service to connect from you'r SWING client. If later you are not satisfied with performance, you can switch to RMI. If you use BusinessDelegate pattern then you will need to change BusinessDelegate only, just one class.
    I have written an example EJB based app. which can be accessed by SWING client using RMI or SOAP, WEB client, .NET client and CORBA.
    You can get it from:
    http://www.datapro.lv/~mariso/ejb.html
    feel free to ask questions, if you have any
    Maris Orbidans

  • Can Time Capsule Function as an Internet Router for Wired Clients?

    I have a 1st Generation Time Capsule with three Gigabit Ethernet LAN ports. Currently the Time Capsule is connected to a 12-year old Linksys router which connects with my DSL modem and functions as the router for the Time Capsule and several other wired devices connected to the Linksys Ethernet ports.
    Can I get rid of the Linksys and use the Time Capsule as the Internet gateway and router for the whole network? All the documentation I've been able to find seems ambiguous. For example, a knowledge base article, "Airport Utility 6.x: Connect to the Internet using PPPoE" (http://support.apple.com/kb/PH5099) says "...Time Capsule...uses DHCP and NAT to share that IP connection with computers on your wireless network. (emphasis mine).
    If I can use the Time Capsule as a wired router, and I want to connect more than three wired devices, can I connect them to the Time Capsule via an Ethernet switch?
    Thanks for your help!

    The Time Capsule is both a wired and wireless router, so it can connect to a modem and function as the main router for the network.
    If you do not need the wireless function of the Time Capsule, the wireless radio can be turned off manually once the device has been configured. If you need more Ethernet connections, a 5-port, 8-port, 16-port etc. Ethernet switch can be connected to one of the LAN <-> ports on the Time Capsule.
    If your Linksy is currently configured to connect using PPPoE settings, then the Time Capsule will need to be setup to provide those settings in order to connect to the Internet. Most DSL providers require a user name and password to establish the PPPoE service.

  • Option to disable the "slide to call" feature for missed calls from lock screen

    I realized that when the iphone (running iOS5) is locked, the“Slide to Call” allows anyone to make an outgoing call to the missed calls from a locked phone (with passcode). This may allow malicious and unwanted calls to be made from a locked phone by anyone having access to the phone and defeats the purpose of having the phone locked by a passcode.
    Don't get me wrong, it is nice feature for people who don't care about locking their phone, but I believe there should be an option to disable the “slide to call” or at least require password before allowing the outgoing call to go through. 
    At this point the only option that I see is to disable the phone related notifications from lock screen, which prevents all phone related notifications to be displayed on lock screen (missed or voicemail). This is not a desired solution.....
    This is the first time in the history of iOSes, that a user can make outgoing calls from a locked phone with a passcode. Even the voice commands (for dialling a number) have option to be disabled on locked screen.
    I was wondering if anybody else feels the same way about this? or have a solution?

    I share the same feeling with you about this issue.
    Actually I was very surprised when I discovered that!
    In addition to this, when you actually slide a missed call, it calls the person and when you end the call, the notification of the missed call is still present! So that person can be called again and again and again.
    This is a serious issue that Apple has overlooked!
    Please secure the iOS 5.
    Thanks.

  • Disabling the default search when searching for master Agreements

    Hello Experts
    I am relatively new to SAP e sourcing ,we are working on 5.1 system.
    We have a query , Contract management->Agreements->Search master agreements and Sub agreements.
    This query takes a lot of time for execution.
    When user selects this option , it runs this query and then displays a screen with all the filters and search results at the bottom.
    I want to ensure that this query is not run by default, so that when user selects this option , the page only displays the selection criteria , users can specify the filter values and hit on search.
    Can anyone please help me on how can we disable the default execution of query everytime "Search master agreements and Sub agreements " is selected from the dropdown.
    is there any option within the query itself or do we need any script for doing this.
    Regards
    Vikas

    Hello Vikas,
    This should be the general approach.
    1) Write a new query that has the functionality you desire. In your case you can duplicate the existing query and make one of the filters mandatory. This will ensure that the query does not get executed by default. Save this new query in the system.
    2) Identify the corresponding query group. In your case it is FCI-ContractBuyList.
    3) In this query group, find the entry for 'Search Master Agreements and Agreements' query and check 'Remove Query from Selection List'.
    4)Add your new query in this query group and check the 'Include in SRM Navigation' checkbox. Click Save.
    Let us know if this works.
    Thanks
    Devesh

  • Where is the update to iOS 6 for Apple TV?

    I assumed iOS 6 would be available to the Apple TV at the same time as the idevices, but it doesn't seem to be.

    ATV iOS updates don't happen for a while after other iDevices.  The iOS beta for ATV hasn't hit GM yet and may do so soon.

  • Whats the use of ios 8 for 8GB iphone 4 users?

    This is patankars from mumbai
    I beleive in steve jobs iphone 4
    have not updated latest ios 7 its not feasible for 8 GB phones ( you can check the reviews)
    In ios 8 had they kept in mind to make useble for ipnone 4 users

    Well no.  They can't keep in mind every singe version of the iPhone with every single iOS update - an iPhone 4 is quite old in technology terms now, so if you want something different, then you'll have to by a new iPhone that is more up-to-date, so this means you are looking at either an iPhone 5s or 5c or perhaps the new iPhone due to be announced in September we think.
    In technology terms, you cannot update every single iPhone, due to storage capacity etc.  Perhaps it is time to buy a new phone.

  • Is there a way to disable the itunes video pop up for music videos in itunes 11?

    I'm wondering if there is a way to disable the video window from popping up everytime I change a music video track in itunes in previous versions I always used play in artwork viewer but I accidentally updated and now that option is no longer there.  I use itunes to organize my music collection as I'm a video dj but it's becoming to be a really big pain now with all the videos popping up. Any help would be greatly appreciated

    You can choose to have videos play in the iTunes window, rather than a separate window. Start playback of a video, then right click in the video and choose "Play video in iTunes window"

  • Disabling the creation of sample application for new workspace

    Hi,
    Just wondering if it's possible to disable the sample the application that is created when ever you create a new workspace? Also so that it doesn't create the 'demo' tables and associated sequences. Pretty sure we have this configured at work, but can't remember how we did it.
    Any help appreciated.
    Ta,
    Trent

    Hi,
    Yes it is
    http://download.oracle.com/docs/cd/E14373_01/admin.32/e13371/adm_wrkspc.htm#sthref154
    Br ,Jari

  • HT4623 What is the most current iOS version for iPhone 3G?

    I have an iPhone 3G, what is the most current iOS version? I have 4.2.1 and when I tried to update, iTunes says that I have the current version. I can't seem to download any apps with 4.2.1.

    That is correct,
    The last release of iOS to support the 3G model was 4.2.1, released on November 22, 2010
    The 3G model is now 4 and half years old.

  • Disable the entry to a database for update

    Hi,
    I have database uses by business program.
    When I want to upgrade the database, no one else can log in. But for upgrade the software use multithread.
    For prepare upgrade, first I write message for users, who uses the database, for logout. But someone come back before i can start upgrade. Ex. not used it when i send mail.
    So I thought for deny login for users to successfully upgrade. But deny only for this database! The other database must be accessible! And the database must be accessible for me, and for program I'm started from my local computer!
    How can i solve this problem?
    Gyula

    But the program use same SQL login for user and for update too. Therefore, if I run the program for update, it use owner SQL login. If the user want to use the software, it use owner SQL login too.
    The different only the IP_Address, or Host Name (System_User is the softwer used user).
    You could mess with a login trigger, but I don't like that since the login trigger is on server level.
    Rather I think that you should have different logins. The login for the application should have plain rights, like db_datareader/writer and EXECUTE on stored procedures. The login for the upgrade should be db_owner.
    An alternative is to have a table that application looks at when the user logs in which says "Upgrade in progress, please try later". To kick out the users you would flip to SINGLE_USER WITH ROLLBACK IMMEDIATE, set this flag, and then switch back
    to MULTI_USER.
    Erland Sommarskog, SQL Server MVP, [email protected]

Maybe you are looking for