Disable touchttone on dial pad?

How do I do it?

Once you have dialed the telephone number and tap Call, the numbers (tones) are sent as soon as you press a number on the key pad, so there is no way to retract a number that was already sent. The only way you could get around this that I can think of would in your case pose a grave security risk, but here goes. Create a contact entry for your bank when you enter the phone number, put a pause then enter the account number. Again, I must warn you that in your case this would be a serious security issue.

Similar Messages

My ipod is disabled and the dial pad isn't coming back up. What should i do?

My ipod is disabled so it told me to hook it up to itunes, so i did butthen itunes told me that it can read the ipod til i putthe code in and i cant do that because the dial pad is not showing up. What should i do?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

CTIOS softphone version 7 dial pad 'more' option not showing all callvar

All. I have an ICM version 7 system in lab. When I login CTIOS softphone and try to use 'more' option in dial pad to set a callvar1 before dialing out I saw only var8,var9, var10 and transfernote, customerid showing up. I've seen all call vars showing up in the 'more' option in other ICM system so I wonder why in this lab system I'm only seeing three of them. I've checked registry and couldn't find anywhere to configure it. Can someone please help?
Thanks.

Are the variables missing from the call grid as well? If so, someone may have disabled the display of certain variables on the server. Check the keys:
[HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\CtiOs\\\ EnterpriseDesktopSettings\
All Desktops\Grid\CallAppearance\Columns\Number\Position] [HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\CtiOs\\\ EnterpriseDesktopSettings\
All Desktops\Grid\CallAppearance\Columns\Number\Position]
More info on how the registry keys work can be found in the CTIOS System Manager's Guide here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/ctios/ctios7_0/installation/guide/cti70mgr.pdf

Dial Pad Sounds

Can I disable iPhone dial pad sounds without using the side switch as my only option?

I think it is very big problem. I hate to hear beep sound when I am dialing a number. I just bought an apple 5, but I am going to return it because of this problem. I feel like when I purchase iphone I have to use my iphone according to whatever rules iphone creates. It is my phone and I should be able to change settings and use it however I like it. It is frustrating that for every simple thing I need to download an application and pay for it. Just to be able to make my dial pad silence, I need to go and buy an application. I don't really care about paying for this specific application, but this scares me because I think for every simple thing that I'm doing for my iphone I will need to pay. Even for a very basic setting option I need to pay.

Numbers for dial pad not recognized connected to o...

Hi,
When being connected to a bank (fixed line) support number through Skype I have to choose an option in their systems menu through the dial pad to be connected to the right department. However their system is not recognizing numbers picked from the dial pad and asks again after which the call is disconnected.
Please advise?
Thanks in advance ErikT

You can uninstall current version of Skype from the control Panel and you can install Special Version.
http://www.skype.com/go/getskype-sse
and disable automatic updating of Skype.
In Skype, Tools >> Options >> Advanced >> Automatic updates >> Click on Turn off automatic updates >> Save Changes.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

Treo 680 Dial Pad not working after desktop update

I was a Zire 72 user.
I bought a Treo 690. As manual said, I installed Palm Desktop over my old Zire PD.
Everythings works fine but two problems.
1- The dial pad does not show the numbers for dial anymore.
When I press the dial pad, nothing happens. If I use the 5 way navigator, I can switch between all the other 4 tabs, but it acts like the dial pad tab does not exist.
2- Contacts were not updated ion my phone. I guess it's because I'm synchronizing with outlook 2007. Should I install 2007 conduit updater?
I'm thinking it would be better to uninstall PDesktop, reset my palm and start installing each application one by one.
Tnx
Diego

You can uninstall current version of Skype from the control Panel and you can install Special Version.
http://www.skype.com/go/getskype-sse
and disable automatic updating of Skype.
In Skype, Tools >> Options >> Advanced >> Automatic updates >> Click on Turn off automatic updates >> Save Changes.
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

How can I display the dialed digits in the dial-pad window for Jabber 9.7.4

Scenario: From his Jabber 9.7 phone-mode, the customer dials in to a auto-attendant and he cannot see the digits he is entering from the dial-pad icon, it displays **********
Is there any config to allow the display of these digits dialed after the call is connected ?

i solved this problem using this query
SELECT STOCK_CODE, COUNTRY_ID,
SUM(DECODE(to_char(the_date,'dd') ,'01', buy_qty)) "1",
SUM(DECODE(to_char(the_date,'dd') , '02', buy_qty)) "2",
SUM(DECODE(to_char(the_date,'dd') , '03', buy_qty)) "3",
SUM(DECODE(to_char(the_date,'dd') , '04', buy_qty)) "4",
SUM(DECODE(to_char(the_date,'dd') , '05', buy_qty)) "5",
SUM(DECODE(to_char(the_date,'dd') , '06', buy_qty)) "6",
SUM(DECODE(to_char(the_date,'dd') , '07', buy_qty)) "7",
SUM(DECODE(to_char(the_date,'dd') , '08', buy_qty)) "8",
SUM(DECODE(to_char(the_date,'dd') , '09', buy_qty)) "9",
SUM(DECODE(to_char(the_date,'dd') , '10', buy_qty)) "10",
SUM(DECODE(to_char(the_date,'dd') , '11', buy_qty)) "11",
SUM(DECODE(to_char(the_date,'dd') , '12', buy_qty)) "12",
SUM(DECODE(to_char(the_date,'dd') , '13', buy_qty)) "13",
SUM(DECODE(to_char(the_date,'dd') , '14', buy_qty)) "14",
SUM(DECODE(to_char(the_date,'dd') , '15', buy_qty)) "15",
SUM(DECODE(to_char(the_date,'dd') , '16', buy_qty)) "16",
SUM(DECODE(to_char(the_date,'dd') , '17', buy_qty)) "17",
SUM(DECODE(to_char(the_date,'dd') , '18', buy_qty)) "18",
SUM(DECODE(to_char(the_date,'dd') , '19', buy_qty)) "19",
SUM(DECODE(to_char(the_date,'dd') , '20', buy_qty)) "20",
SUM(DECODE(to_char(the_date,'dd') , '21', buy_qty)) "21",
SUM(DECODE(to_char(the_date,'dd') , '22', buy_qty)) "22",
SUM(DECODE(to_char(the_date,'dd') , '23', buy_qty)) "23",
SUM(DECODE(to_char(the_date,'dd') , '24', buy_qty)) "24",
SUM(DECODE(to_char(the_date,'dd') , '25', buy_qty)) "25",
SUM(DECODE(to_char(the_date,'dd') , '26', buy_qty)) "26",
SUM(DECODE(to_char(the_date,'dd') , '27', buy_qty)) "27",
SUM(DECODE(to_char(the_date,'dd') , '28', buy_qty)) "28",
SUM(DECODE(to_char(the_date,'dd') , '29', buy_qty)) "29",
SUM(DECODE(to_char(the_date,'dd') , '30', buy_qty)) "30",
SUM(DECODE(to_char(the_date,'dd') , '31', buy_qty)) "31"
FROM HS_DAY_CLOSE
GROUP BY STOCK_CODE,COUNTRY_ID

How to delete one number in the dial pad dropdown ...

When calling a phone number from Skype, I mistyped the phone number. Now whenever I call a phone number, the dial pad's dropdown list includes the mistyped phone number. I want to delete that single number from the dial pad's dropdown list.
Unfortunately I obeyed some people's suggestions in other topics. Now the contents of all chat histories with all ordinary Skype contacts are gone. I used to save logs of those forever, but the attempt to delete one phone call history actually deleted all chat histories with everyone. That was not what I wanted. ... And then, to add insult to injury, whenever I call a phone number, the dial pad's dropdown list still includes the mistyped phone number that I want to delete.
Is there any way to do it?
Even though I make more typos than everyone else, even though my keyboard's Backspace button gets a pounding, surely I'm not the only one?

NOT My day - just typed out a message and clicked Preview. The message is gone. Short reply - this is suppose, at heart, to be a telephone system. BASICS like keyboard entry error correction should be available (in an intuitive way). Backspace doesn't erase last entry and you cannot even delete ALL the entry. Would you fix this or explain why it cannot be done - and then find out how it can.

How to delete one number in the dial pad dropdown list?

When calling a phone number from Skype, I mistyped the phone number. Now whenever I call a phone number, the dial pad's dropdown list includes the mistyped phone number. I want to delete that single number from the dial pad's dropdown list. Unfortunately I obeyed some people's suggestions in other topics. Now the contents of all chat histories with all ordinary Skype contacts are gone. I used to save logs of those forever, but the attempt to delete one phone call history actually deleted all chat histories with everyone. That was not what I wanted. ... And then, to add insult to injury, whenever I call a phone number, the dial pad's dropdown list still includes the mistyped phone number that I want to delete. Is there any way to do it? Even though I make more typos than everyone else, even though my keyboard's Backspace button gets a pounding, surely I'm not the only one?

NOT My day - just typed out a message and clicked Preview. The message is gone. Short reply - this is suppose, at heart, to be a telephone system. BASICS like keyboard entry error correction should be available (in an intuitive way). Backspace doesn't erase last entry and you cannot even delete ALL the entry. Would you fix this or explain why it cannot be done - and then find out how it can.

I can't access my dial pad to make calls. The last few days when I go to the phone a pop up appears that says "unfortunatly contacts has stopped working" after pressing ok to remove the pop up, it goes back to the home screen. This also happens when I

The last several days I have not been able to access the dial pad. When I go to phone a pop up appears that says "unfortunatly contacts has stopped working." To remove the pop up you have to hit 'ok', the it goes back to the home screen. This also happens when I go to contacts.

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

Want to disable/"grey out" dial-up connection "settings" button in the "connections" tab of Internet Options

Hi, I'm looking to "grey out" a dial-up connection for some users in workplace, so that they are forced to use our VPN client in order to access the web. Does anyone know if this is possible?
I know you can disable all settings on that tab using local group policy, (e.g. Administrative Templates\Windows Components\Internet Explorer) but I only want to disable a specific dial-up connection (for usb 3G modems).
I've read of various IE settings being locked down in the registry here, HKEY_CURRENT_USER\Software\Policies\Microsoft\Internet Explorer\Restrictions, but havent seen the settings I want.
The actual connection is visible here, HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections, I just cant figure out how to grey it out. Any ideas? Thanks!

http://technet.microsoft.com/en-us/library/cc732613(v=WS.10).aspx
The following Group Policy settings can be edited and applied to users that are members of the Group Policy object (GPO) in which the Group Policy setting is included. By default, the Group Policy settings are not configured.
Prohibit deletion of remote access connections. If you enable this Group Policy setting, then affected users cannot delete any remote access connections, including those they create themselves.
Prohibit access to the Remote Access Preferences item on the Advanced menu. If you enable this Group Policy setting, then affected users cannot access the
Remote Access Preferences setting on the Advanced menu of the Network Connections folder. The top menu bar, including the
Advanced menu, appears when you press the ALT key.
Prohibit access to properties of a LAN connection. If you enable this Group Policy setting, then affected users cannot change any of the properties of a LAN connection.
Ability to change properties of an all user remote access connection. If you enable this Group Policy setting, then affected users can modify the properties of a remote access connection that is shared with the other users on the computer.
By default, standard users can only modify properties for a connection that is not shared.
Prohibit connecting and disconnecting a remote access connection. If you enable this Group Policy setting, then affected users cannot connect by using any remote access connection, or disconnect any that are currently connected.
Prohibit changing properties of a private remote access connection. If you enable this Group Policy setting, then affected users cannot change the remote access connection properties that are not shared. By default, standard users can modify
connections that are not shared.
Prohibit renaming private remote access connections. If you enable this Group Policy setting, then affected users cannot rename remote access
connections that are not shared. By default, standard users can modify connections that are not shared.
Rob^_^

Paste phone n° out of email in work environment to the phone dialing pad is not possible

Hello,
I am trying to paste a phone number out of an email in my work environment to the dialing pad of the phone.
When I do that, I receive the error message that I am not allowed to paste work content into a personal application, although I am in the work environment and I have also opened the phone in the work environment.
When the email recognized the phone number "automatically," I am able to call that number.
I am using a Z30 with the software release 10.2.1.2102.
Thank you.
Regards.

Hmmm go back and sign out and turn off iMessage then after that reset all settings, its not going to delete anything off the phone. After reset all settings. Go back turn imessages on and sign back in.

How do I turn off the iPhone dial pad tones

I Have the dial pad tones turned off before the update now it's loud how do I turn them off

Facetime preferences.

Z30 - keeping the dial pad "lit" when in a call

I have been struggling with the lack of a physical keyboard and trackpad since being upgraded to the z30. I've discovered a related problem with the touch screen dial pad. What am I missing?
I placed a call that was answered with an automated reception. It required me to press certain numbers and spell names to get my call directed to the right place. However, the screen kept "blanking out" during the call. Is there a setting that will allow me to keep the screen "lit" whenever I am on a call?
For example, it would say "press pound", so I would pull the phone away from my head, and look at the phone and it was unlit. I would touch the screen (sometimes multiple times) until it would light. Then I would press pound, but by the time I had done this, the window to do so with the automated reception had timed out. So the automated call system would repeat the question, by which time the screen would have blacked out again. Each time I had to "recussitate" the screen before I could press whatever command was required by the automated call system. Often it took too long to get the screen lit again and I had to be re-prompted. It was quite frustrating for something that used to be so simple with a physical keyboard.

TAdvisorKing wrote:
I think you are mistaken. My screen time-out is set for 5 minutes.
The time-out of the dial-pad screen appears to be instantaneous, once the call is placed.
i just tried it on mine with a call and it went off in 30 seconds, then set to one minute and it timed out in one minute
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

TS1702 applications even things like text messages and dial pad keep shutting after 30 secs to 1 minute

My iphone is less than one year old.
Just in the last two weeks it keeps crashing out of applications including text messages, dial pad, notes, calender etc.I am lucky if i get upto 2 minutes without it closing on me. It closes to home screen.
Please help
Dharmesh Parikh
New Zealand

awd_uk...
Using two pieces of software, a webpage and this walk-thru I was able to successfully put my old text messages onto the new iOS 5.0.
Can be found here >> https://discussions.apple.com/thread/3375277?start=90&tstart=0
Look for benhefron's post. It's magic.
Thanks again....
*SHiNK*

Disable touchttone on dial pad?

Similar Messages

Maybe you are looking for