Disable trash emptying confirmation dialog
Is it possible to disable the confirmation dialogue that pops up every time I have to empty the trash bin? It would make my work flow faster.
it still displays even with that turned off
[img]http://img.skitch.com/20100429-rc2441gcx5axrbc6b25xp2gkm5.png[/img]
Similar Messages
-
Disable the AirDrop confirmation dialog?
I frequently use AirDrop to transfer files between iMac and MBA. Is there any way to disable this annoying confirmation dialog, as I am on a secure home network?
Thanks for your input. I currently have both iMac and MBP set to share over the network, but they seem to only want to connect about 50% of the time...when they don't want to communicate, I can usually use AirDrop, I just would prefer to skip the confirmation dialog (I know you can set the Shared Disk setting to not ask for confirmation)
-
Every time I a go to a new page, whether it is the same site or not, I get a dialog box that appears that reads "Confirm Dialog Preference," and the options include yes or no. How do I get this to stop? It is really, really annoying.
Can you attach a screenshot showing the dialog?
Does the issue still occur if you start Firefox in Safe Mode? http://support.mozilla.com/en-US/kb/Safe+Mode
How about with a new, empty profile? http://support.mozilla.com/en-US/kb/Basic%20Troubleshooting#w_8-make-a-new-profile -
Conditional confirm dialog with button
Hi all,
I want to create a confirm dialog with submit button that can fire only if one item is not submitted in that page.
i have one check box item in my page called P2_LWF
i created confirm dialog with button using the below code
javascript:if (confirm('Are you sure you want to proceed?')) {
this.disabled=true; this.value='Submitted...';
doSubmit('SUBMIT');
The moment i click submit button i want to fire that confirm dialog only if P2_LWF is unchecked.
How can i do that in my application?
Regards,
AneesHi marko,
find application link below
http://apex.oracle.com/pls/apex/f?p=14972:1:25026364614886:::::
user name: [email protected]
pswd: symphony
you can access my work space using below credentials
http://apex.oracle.com/pls/apex/f?p=4550:1:0:::::
workspace : aneesmohd
username : [email protected]
paswd: symphony
application name: Confirmation Dialog
application id= 14972
when i press submit button i can get the confirmation dialog,but i want to make that as conditional (only when dl and lwf checkboxes are not ticked).if those are ticked i want to submit without getting the confirmation dialog.
and want to clear the employee region cashe(report region) ones submit button pressed or refresh the page.
Regards,
Anees
Edited by: anees_mohd on Jan 16, 2013 3:25 AM -
Confirmation Dialog Box Appears Disappears
Hi,
I am facing a problem here on Same os win 98 using different versions of Java run time environment.
The code is supposed to work in this way.
Applet is initiated by a click. a confirmation dialog box appears askign for input from a user in the form of a Yes or a No. if the user clicks Yes the applet continues otherwise it terminates.
while using 1.4.1_02 This problem occurs that the Confirmation dialog box appears and then disappears for the jar is being downloaded.
But using 1.3.1_04 gives no problems and the Confirmation box does not disappear.
Regards,
SaurabhHmmm, are you running 10.6.8 or later & installed the Security updates?
Java was an attack vector for FlashBack.
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link -
The operation can’t be completed because you don’t have permission to access some of the items. ive moved these files from my sd card to the trash, when i take out the sd card the trash empties but then fills up when i put it back in, it wont empty.
In the Finder, press the key combination shift-command-C, or select
Go ▹ Computer
from the menu bar. A window will open showing all mounted volumes. Select the one in question and open the Info window. What is shown as the Format in the General section? -
Empty error dialog when trying to sync (Windows 7 x64 + itunes 9)
Using Windows 7 Enterprise, 64bit and the latest x64 installer of iTunes (9.0.2.25) on a HP EliteBook 8530w.
Whenever I open iTunes, click on my iPhone (3G) and then select the "Info" tab I get an empty error dialogs popping up: See screenshot http://img214.imageshack.us/img214/1582/ituneserror.png
This dialog pops up a couple of times, one after the other. After I've dismissed them all, I can click sync and it appears to actually sync (both the phone and itunes tells me it's synchronizing). However, the empty dialog appears again during sync and once the sync has completed there hasn't been any changes to the phone
What I'm trying to sync is calendar and contacts from MS Outlook 2007. It used to work perfectly on this same computer running XP... it all happened after I re-installed the OS and upgraded to Win7.
I've searched through the internet and found various references to sync problems on vista/win7 on x64 although non of the symptoms seems to match mine (others were seeing bluescreens, frozen itunes etc.). Also, given the verbosity of the error dialog, it's quite hard to know what's wrong...
Has anyone even seen this problem or am I alone with this?I was finally able to make it work. I'm so happy.
For some reason, perhaps it was pure desperation or maybe I had read it somewhere on the internet, I decided to set Outlook as my default mail application. Unbelievably, this made it work - the empty error boxes are gone and synchronization works like a charm.
So, when Outlook asks if it should be default mailer, answer yes. You can also configure this in Outlook or in the Windows 7 start menu -> Default Programs -> Set your default programs -> Outlook.
Just make sure that Outlook is default for everything it wants to be default to. My first attempt set it to "11 out of 13" and it wasn't until I selected to use it to "all file types and protocols that it can handle to default".
Anyway, I'm a happy user now and hopefully this can help others who are experiencing the same issues -
Displaying Multiple Sentences in Confirmation Dialog Box
Hi Experts,
Can anybody please tell me how to display three or multiple separate sentences in a Confirmation
Dialog box. I am able to diaplay two sentences in a single line but the dialog box is getting stretched a
lot. So i want to diaply them in separate sentences onr below the other.
Thanks a lot.Hi shrini...
you want to number of line display in one dialog box ..
you have to declare one Strinh like thiss as below..
have to create one event method as OK...which is visible in eventhandler code as
findInEventHandlers("OK");
create one method in component aas showBox....
public void showBox( )
//@@begin showBox()
String dialogText="welocme to""\n""India""\n".........................
IWDEventHandlerInfo info=wdControllerAPI.getControllerInfo().findInEventHandlers("OK");
IWDConfirmationDialog win=wdComponentAPI.getWindowManager().createConfirmationWindow(dialogText,info,"OKK");
win.open();();
thanks
jati -
File download element in confirmation dialog box
Hi,
Can I use File Download elements in Confirmation Dialog Box?Please raply me as early as possible.
Regards
AniruddhaHi
You can not use File-Upload UI element inside confirmation dialog ,because there is no provision to add any UI ,except Button.
Please avoid my previous reply .
Best Regards
Satish Kumar
Edited by: satish jhariya on Mar 3, 2009 11:29 AM -
How to get the choice clicked by the user on a Confirmation dialog?
Hi,
'm trying with Confirmation dialog which should return
'yes', 'No', or 'Cancel'
I wrote like:
String Message="Do u want to update ??";
IWDControllerInfo controllerInfo = wdControllerAPI.getViewInfo().getViewController();
IWDConfirmationDialog dialog =wdComponentAPI.getWindowManager().createConfirmationWindow( Message, controllerInfo.findInEventHandlers("Yes"), "Yes");
dialog.addChoice(controllerInfo.findInEventHandlers("No"),"No");
dialog.addChoice(controllerInfo.findInEventHandlers("Cancel"),"Cancel");
dialog.open();
It works as a normal dialog window
But how can I get the choice that is clicked by the user.
ie . either 'Yes', 'No', or 'Cancel'.
can any body help me
thanks
SmithaSmitha,
In addition to your code, create 3 event handlers in your controller, name them Yes, No, Cancel. In every event handler you know what event was fired, i.e. what button is pressed.
Valery Silaev
EPAM Systems
http://www.NetWeaverTeam.com -
Is there an easy way to implement a confirm dialog?
Hi All,
I'm wondering is there an easy way to show an confirm dialog to user with out create a new view manually?
Thanks,
YiNingHi ,
use the below code for confirmation box , with 2 options "OK "
and "Cancel"
IWDControllerInfo controllerInfo = wdControllerAPI.getViewInfo().getViewController();
IWDConfirmationDialog dialog = wdComponentAPI.getWindowManager().createConfirmationWindow
( String dialogText,controllerInfo.findInEventHandlers ("ok"),"Ok");
dialog.addChoice(controllerInfo.findInEventHandlers ("cancel"), "Cancel");
dialog.open();
Thanks,
Sunitha Hari -
Confirmation Dialog when clicking on Tree Node.
I am working on Oracle Apex 4.2.0.00.27 and I have the following problem:
The code below shows the definition of a tree. The tree displays records from the table ACTIVITIES in hierarchical structure.
When user clicks on a leaf/node of the tree he will be redirected to another page where the details of each Activity/leaf/node are displayed.
The tree is part of a page where I have established a functionality to check for changes on the input fields of the page and inform the user when he tries to redirect without first saving the changes he made.
What I want to do is:
WHEN user clicks on a node of the tree AND he hasn't saved any changes he made
THEN
trigger a confirmation dialog.
IF
he clicks OK he is redirected to the node details page as defined on the tree definition:
f?p=&APP_ID.:10:'||:APP_SESSION||'::::P10_ID:'||"ID"
ELSE if he clicks CANCEL
he stays on the same page.
The condition to trigger the confirmation box is:
if (document.getElementById('P0_CHANGES_DETECTED').value == 1)
where P0_CHANGES_DETECTED is a universal hidden text field that is set to +'1'+ every time a change is made.
and here is the tree definition:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
+"NAME" as title,+
null as icon,
+"ID" as value,+
null as tooltip,
decode(PARENT_ID,null,null, 'f?p=&APP_ID.:10:'||:APP_SESSION||'::::P10_ID:'||"ID") as link
from "#OWNER#"."ACTIVITIES"
where GROUP_ID = :P20_GROUP_ID
start with "ID" in (select ID from "#OWNER#"."ACTIVITIES" where GROUP_ID = :P20_GROUP_ID and PARENT_ID is null)
connect by prior "ID" = "PARENT_ID"
order siblings by "ID"
I hope it is clear what I want to achieve. Thanks in advance.So you'll want to bind an event to all tree nodes that checks for the value and then fires the confirmation if there value is 1.
Try something like this:
- first, give your static ID attribute in your tree the value of tree_static_id (or whatever you want. just replace the id selector below with what you choose).
- In your Page Function and Variable Declaration Javascript:
function confirmSave() {
var changeDetected = jQuery('#P0_CHANGES_DETECTED').val();
if(changeDetected == 1) {
//only do this if change is detected
if(confirm('You have unsaved changes. Do you want to leave this page?')) {
window.location('[your url here]');
jQuery(document).ready(function() {
//bind function to the click event
$('#tree_static_id').find('li a').bind('click', function() { confirmSave(); } });
});Hope this helps -
DW CS3 does not display confirmation dialog when checking out file
We have 3 developers set up with DW CS3 Version 9 build 3481.
When checking out a file that is already checked out one pc will
display a dialog box to confirm that you want to check-out the file
as it is already checked out by someone else. This is good as we
want this dialog to appear. However on the other 2 pc's there is no
dialog box displayed and the checkout process continues as if the
file was never checked out.
The text of the confirmation dialog box reads as such :
"index.cfm is checked out by first.lastname. Are you sure you want
to override his/her checkout?". I have been through the preferences
and verified that we have setup the sites in the same manner but we
still have this issue.
Is there a known bug regarding this feature? Is there a
preference setting somewhere that I have missed?
thanksAre each of your developers sharing the same local site?
That's why you are
getting this error if they are. The proper setup would
involve THREE
locations:
1. Local sites (unique to each workstation)
2. Staging server (shared by all workstations)
3. Production server (the live site)
You would have TWO site definitions, which would be -
(for each workstation)
1. Local = #1 (unique location for each workstation)
2. Remote = #2
(for one MASTER workstation)
1. Local = #2
2. Remote = #3
Use the first site definition for day-to-day work and
checking files in/out.
Use the second site definition ONLY for pushing files from
the staging
server to the production server.
That's the only way it will work....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"bemor" <[email protected]> wrote in message
news:g3ojq5$4il$[email protected]..
> We have 3 developers set up with DW CS3 Version 9 build
3481. When
> checking
> out a file that is already checked out one pc will
display a dialog box to
> confirm that you want to check-out the file as it is
already checked out
> by
> someone else. This is good as we want this dialog to
appear. However on
> the
> other 2 pc's there is no dialog box displayed and the
checkout process
> continues as if the file was never checked out.
>
> The text of the confirmation dialog box reads as such :
"index.cfm is
> checked
> out by first.lastname. Are you sure you want to override
his/her
> checkout?". I
> have been through the preferences and verified that we
have setup the
> sites in
> the same manner but we still have this issue.
>
> Is there a known bug regarding this feature? Is there a
preference
> setting
> somewhere that I have missed?
>
> thanks
> -
Hi everyone, I need help for my problem. I want do display confirmation dialog with icon and i find that i must using method setIcon(WDURLGenerator.getSAPIconWebResourcePath("???")). I have read the help about WDURLGenerator but still i cannot understand what parameter that i must use in this method (getSAPIconWebResourcePath(...)). I have try fill this methos with this : "~sapicons/s_b_disp.gif" but it not works. Anyone can explain this to me ? Thank you.
Regards,
SatriaHi ,
For your actual question , it would be
getSAPIconWebResourcePath("s_b_disp.gif") ;
And as far as i know , using a ~sapIcons .. would inturn use the same function..!
Maybe give this function a try ! Also , check if the sapIcons folder exists in the server
usr/sap/...server0/ and then search for it ..
Regards
Bharathwaj -
Multiple Confirmation dialog boxes event handling
Hi all,
I had a scenario, where i need to display two confirmation dialog boxes based on timers.
At the first timers timeout confirmation dialog box poped up and user haven't done anything.
second confirmation dialog popup appears after second timer timeout.
But, my problem is closing or destroying the first dialog box, when handling the second dialog event or before second dialog popup on screen.
Can anyone suggest the best approach to handle dialog destroy functionality.
regards,
Venkathi!
also refer to this link if you are going for dialog windows
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903fed0d-7be4-2a10-cd96-9136707374e1
thanks
vishal
Maybe you are looking for
-
Why can't I find certain Pantone plus colors in Illustrator CS6 color books?
Why can't I find certain Pantone plus colors in Illustrator CS6 color books? For example I want to use PMS 2296C, but it is not coming up in the color swatch book in Illustrator.
-
Report: Statistical WBS elements with assets assigned to them - actual cost
Hi all, I would like to run a report that gave me this info: WBS Element (all statistical) Assets assigned to each WBS Actual costs It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
-
Execution of txkrun.pl errored out.
Hi, While executing txkrun.pl in apps server it's giving below error. Please suggest how to overcome this error. Error Message: -bash-3.2$ $FND_TOP/bin/txkrun.pl -script=DeployForms-c4ws ### Creating the directory to store temporary logs: /euat/erp/u
-
HT1766 How I restore my IPad to a previous date to recover my pictures and programs
How I restore my IPad to a previous date to recover my pictures and programs?
-
Display XML on multiple frames
Hi All, Requesting a little help please! - AS3 I'm trying to load content from an XML Document into a Flash Presentation. My AS is in the top layer. This layer spand the entire document. Layer two is set up with keyframes every 10 frames. Each keyfra