Disable Video Recorder on Cisco MediaSense

Anybody knows how to disable video record at Cisco MediaSense? I'm calling from Cisco IP Phones with video enable but i need only the audio record at mediasense.
Thanks

Just to add to Chris, what version of firmware/did you upgrade the firmware?
HTH,
Chris
Sent from Cisco Technical Support iPad App

Similar Messages

  • Disable Continuous Autofocus during Video Recording

    Hi, is there a way to disable the continuous autofocus during video recording? The continous autofocus is very annoying during video recording as the video consistently appear out of focus when during refocusing. There are alot of situations where continuous focusing is not required.
    Can we have a new video focusing mode where the camera will only refocus to an area that is tapped on the screen? This is a very basic feature that is available in almost all other smartphones. Without this focusing mode, the video recording of the Z1 is 99% unusable although the phone has a very good sensor. As the Z1 is Sony's flagship smartphone, I hope that you can add this simple feature as a software update asap. Thanks.

    Is there any way to disable continuous auto focus? or at least any setting which can help getting a better video. In My xperia z1 compact , when i take a video, it will always hunt for the focus, result is Jurky video.
    after lollipop upgrade also, things doesn't changed much.
    so can anybody tell, any setting that can avoid this?
    Thanks
    Pavan

  • N8 - Disable red light video recording

    Any way to disable the red light during video record? Thanks

    I tried all settings, and wherever i could find an option for turning the focus light off, i did.
    So, i noticed that once i have settings on macro, it turns off the red light, but only for the first video shoot. If i pause, instead of stopping, and keep recording the video, it's alright.
    But once i stop, the red light turns on again. In that case I have to restart the camera pro.
    Not a perfect solution, but nevertheless, there is a solution.

  • App with continuous autofocus during video recording?

    Is there an iPhone app which allow continuous autofocus during video recording? (W/o tapping)
    Thanks!

    Is there any way to disable continuous auto focus? or at least any setting which can help getting a better video. In My xperia z1 compact , when i take a video, it will always hunt for the focus, result is Jurky video.
    after lollipop upgrade also, things doesn't changed much.
    so can anybody tell, any setting that can avoid this?
    Thanks
    Pavan

  • IPhone 4 video recording

    Wondering why whenever i transfer videos that ive recording on my iphone 4 back to iphoto the resolution is vertically oriented - as in I can't make by video fill the screen, its just a tall, thin, vertical column of video. I suspect it has to do with the resolution the video was recorded in (720x1280) and my monitor's resolution 1440 x 900. Yes? If you are using a macbook pro are there any options or workarounds for this?

    ahh.. stupid me. leave it to apple to make the solution maddeningly simple. you want 16:9 video - record in landscape mode. duh!
    Neither here nor there but i would LOVE a phyiscal button camera trigger. Loved it on Camera+ until they disabled it.

  • 8945 Disable Video in CM Admin

    I am trying to disable video for 12 phones through CM Admin without changing the setting on each phone. I also do not want users to be able to enable video. Does anyone know if this is possible? If so, how do I go about it?
    I've already changed the settings under Device, Phone, and Product Specific Configuration Layout to "Video Capabilities: Disabled." I've also setup a Common Phone Profile with "Cisco Camera: Disabled" and "Video Calling: Disabled (Checked for Override Common Settings)."
    Any suggestions?

    Just to add to Chris, what version of firmware/did you upgrade the firmware?
    HTH,
    Chris
    Sent from Cisco Technical Support iPad App

  • CUCI-Lync Disable Video Registry Key

    In the CUCI-Lync release notes:
    Release 8.5(2)
    This release provides the following new functionality and enhancements:
    • Added registry setting to enable administrators to enable or disable video calls for individual users •Added registry setting to enable administrators to enable or disable video calls for individual users
    However the actual keys that have been added don't seem to be listed... does anyone know what they are?
    Aaron

    HKEY_CURRENT_USER\Software\Cisco Systems, Inc.\Client Services Framework\AdminData
    Or
    HKEY_CURRENT_USER\Software\Policies\Cisco Systems, Inc.\Client Services Framework\AdminData
    Depending if you are using .reg or group policy.
    Keys are here:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucimoc/8_5/english/installguide/config_clients.html#wp1084131
    The key you want is:
    VideoEnabled
    Type REG_SZ set to either "True" or "False"

  • How Do I Pause A Video Recording?

    How can I pause a video recording using the inbuilt camera on my iPod Touch 8GB? There don't seem to be a option to do this. Is there a way of combining videos to be as one instead?
    Thanks

    You can also check for problems caused by recent Flash updates and try these:
    *disable a possible RealPlayer Browser Record Plugin extension for Firefox and update the RealPlayer if installed
    *disable protected mode in Flash 11.3 and later
    *disable hardware acceleration in the Flash plugin
    *http://kb.mozillazine.org/Flash#Troubleshooting
    *http://helpx.adobe.com/flash-player/kb/flash-player-113-crash-mozilla.html

  • Record Level Adjust for Audio in Voice Memo or Video Recorder

    I would like to request that Apple allow me to adjust the record audio volume level when recording in Voice Memo or Video Recorder modes. Often I find that the audio is distorting and most times I cannot step back far enough to avoid distortion levels. While I love the ability to SEE the audio level in Voice Memo mode, I am hoping that it is only a matter of firmware upgrade to be able to ADJUST the record level.
    Also, if it is possible, it would be great to see some indication of audio level when recording video... something simple like a bar graph with green, yellow and red bars with the highest level reached sticking for a few seconds so that I can tell what the level is.
    An alternate solution (if none of the above is possible in a firmware update) would be to automatically adjust the recording level to prevent audio distortion.
    Thanks for the great iPod and here's hoping for a great firmware update in the near future!

    Thanks, I've submitted my recommendation to Apple.

  • Hi,,does the new 2011 imac 27 inch U.S version  support any pal signal inputs as video or hdmi through the video recorder device or kanex xd ?

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

    Hello,,
    I have 1 question please,,,
    does the new 2011 imac 27 inch from USA support or lay any PAL signal ??
    as for example
    I have a friend who lives in the middle east &  has kanex xd & he wants to connect it with the imac 27 inch from Satellite receiver  or PS3 though HDMI cable,, but yet the signal is PAL not NTSC in the middle east,, so will the imac 27 inch play the movie from the satellite in full colour or in blue & says cannot play the movie because its not NTCS ?  because this is U.S version  of imac then he might need an convertor?
    the same as if he want to record any hdmi or analog  device from his video recorder  device,,but the input is pal,,so will it plays normal in the U.S machine or will he find any trouble ???
    so can you pls give me an advice for him
    should he buy the imac from the U.S store or the europe store ??
    N.b : there is no mac store ONLINE in the middle east espicaly in Gulf, thats why he want to buy the imac from the mac store online,,
    and thank you

  • CP 6.0.1.240 - Video Demo Project vs. Video Recording & YouTube

    Hello,
    I have a project with two small slide videos included.  I recorded them using Record New Video Demo and I embedded them on 2 different slides using Video > Insert Video.  Once embedded I added text captions etc and timed them to coincide with the video.  When I preview the video, timing is dead on.  When I publish to YouTube, one of the two videos delays noticeably and it throws off the timiing of all the related captions, etc.  I tried F4V and MP4, I tried uploading using the YouTube button and directly, no change.  I even tried manually pushing the timing of the captions out to see if I could account for the delay on YouTube but it doesn't have to do with the slide just the pre-loading or starting of the video on that slide.  The fact that I have 2 slides each with an embeded video and one works fine and the other doesn't is driving me around the bend.  I compared the two slides side-by-side and could not find any differentiating settings.
    Does anyone have any other suggestions for me to try?
    Thanks
    Julie
    UPDATE:  I went back to compare side-by-side the videos and I have noticed a difference.  One is called a Video Recording and the one that pauses for too long is called a Video Demo Project.  I could have sworn I recorded them in the exact same way.  This sounds silly but does anyone know what I did differenty; why one is a video demo and why the other is a video recorrding?

    UPDATE:  When I finally published the video to YouTube, the hiccup or pause on the background audio seems to have resolved.  It was very evident in previewing the project and not noticeable once published to YouTube.  I have a new issue now as it relates to pausing but not of the audio of the video itself.  I will be posting a new thread for that.

  • In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice.

    In my first iPhone 5, the speaker didn't work and people could not hear me on Speaker phone when I used it. When I used the video recording it did not record sound at all only a hissing/static sound, no voice. I wished for a software fix. I did a hard reset, nothing. I did a full restore to factory settings not putting my backup on and the problem persisted.
    i have been provided with this info
    You can find troubleshooting tips, how-to articles, and moderated
    > > discussion forums on our support website:
    > >
    > > www.apple.com/support
    > >
    > > iPhone: Basic troubleshooting
    > > http://support.apple.com/kb/HT1737
    > >
    I did every step in the link that i have been provided with (thank you), but I’m
    still experiencing the same issue. My experience with Apple has been
    excellent and this has been the first time I have experienced something
    like this with an Apple product. I hope we can find a quick solution.
    In order to get the iPhone 5 as soon as it launched (being a major fan of
    Apple products!), I purchased my iPhone 5 from the UK through a friend of
    mine who lives there.
    My question is: can I have the faulty device replaced within Saudi by one
    of the official resellers here (we have 3: STC, Mobily and Zain)? I want to
    avoid the disruption, complication and expense of sending it back to the
    UK.
    Could you advise whether this is possible or not, and if not how should I
    go about having the device replaced?
    Thank you in advance for your cooperation.

    Nice try! Take a hike.

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • Help me pick a new video recorder

    I need a new video recorder. Please give me some suggestions in the $400-800 range. I have used a Hi-8 Sony, but the sound went, got old, etc.
    My primary use will be videos taken for coaching and my family, which I will put into iMovie and eventually burn to DVD through iDVD. I have been using iMovie 4, but I will upgrade if that would be better. The coaching movies are about 25 minutes with many, many clips, as they are short highlights (2-10 seconds each).
    I currently (and most likely for at least one more year) use an eMac 1.25 GHz G4 with 768 MB RAM and a superdrive.
    So, give me some good options. I like having a decent screen (my current one is a whopping 3"), as I often show athletes their form during practice, although that is not my top priority.
    eMac 1.25 G4   Mac OS X (10.4.4)  

    Hi! Purds,
    You didn't say where you were from. I had to purchase a new camera last semester and having no job, I had no money. I went to the WALMART Website and was able to find a good camera at the lowest price. (About $50 cheaper than I could find the camera anywhere else!) They shipped it right to my house within three day.
    And make sure it has FireWire! Sony has their own version of FireWire, i.Link, but you have to make sure that you can get the proper cable to use on the Mac.
    Always buy the best camera you can afford!
    Clay

  • Video recording issues (it jumps and the audio sto...

    Dear Support team,
    I was very satisfied with my phone for a couple of months but nowadays I've an annoying issue with the video recordings of my Nokia Lumia 920. I've noticed in the past few weeks that there's a "bleep" or a "jump" in each video I take. (Nokia Camera software, Lumia Black, RM-821_eu_hungary_434)
    It's very dissapointing because every video is let's say faulty at some point of the video.
    For example please take a look at the following video at 0:34 where not just the video "jumps" but the audio recording also stops for a couple of seconds:
    https://www.youtube.com/watch?v=xD9R2x5Kx4c
    The interesting thing is that during the next 21 minutes it did not make any mistakes while recording.
    Please take a look at an another example at 3:31:
    https://www.youtube.com/watch?v=hYQ5vNY-BUw
    If you're interested in debugging the issue I can send you somehow (by FTP or so) the original files as well.
    I have got more videos which are like this and it was shown like this on the phone's screen as well so I've ruled out the possibility to have an issue while transfering it to my PC.
    I'm assuming that possibly there's something wrong with the Lumia 920's RAM memory or with the 32GB internal storage drive, e.g.: let's say bad sector like on hard drives.
    The phone recently had it's first freezing while I was reading my facebook the phone suddenly went black and restarted.
    I still have 1,5 year warranty on my phone but I've bought ~150 km far away so I hopeI won't need to travel there and wait for weeks and to travel there again to get my phone back! What do you suggest?
    Is it possible that it's rather a software issue not a hardware? Or should I return my phone to the retail shop or is there any downloadable software patch to correct this issue? Is this a known issue to you?
    I've noticed one more thing: when I'm using my phone for e.g. like 10 minutes it's back cover gets warmer and warmer somewhere around the camera; I thought first it's because of the higher processor and battery usage but I don't think it's normal. The "heat issue" is also present while playing with a game.
    Info: my battery lasts for 1,5 day or so by very moderate usage, is it normal? (4 times a day wifi for 5-10 minutes, max. 1 pcs one minute call per day)
    Thanks for your help in advance,
    Best Regards
    Richárd Márk NAGY

    Hi All,
    I'm shocked about this device as you know I was disappointed due to the video recording glitches previously, but what yesterday happened is the worst I could ever imagine: I've recorded 3 videos and from this 3 videos 2 are unplayable even on my phone and on my PC, it gives an error message: "The video failed to play".
    The 2 files can't be seen in the camera roll only by using Pocket File Manager.
    I was able to copy all files to my computer:
    WP_20140802_21_16_58_Pro.mp4 - 661 203 084 bytes - playable
    WP_20140802_21_22_19_Pro.mp4 - 3939 658 131 bytes - unplayable
    WP_20140802_22_13_59_Pro.mp4 - 3235 991 965 bytes - unplayable
    To me these 2 videos are really very important, please help me to recover them! Please tell me, how you want me to send the files as they're, ~4GB each, by using Onedrive or how?
    If this issue won't be solved I'm considering NOT TO BUY a Nokia again! Can it be a hardware related issue, e.g. faulty internal flash? Should I return the phone to the retail shop?
    Regards
    Richard Mark NAGY

Maybe you are looking for