Disable web access

Cisco CUCM SRND:
With the Web Access feature disabled, the phones will be unable to receive applications pushed to them from Unified CM.
Can anybody give me an example what kind of application it is will be pushed to phone? Thanks

Any 3rd party applications that push to the phone. For example, PhoneTop Messenger can push audio pages, text messages, surveys, weather alerts from NWS, Amber alerts, etc. to your IP phone and web access must be enabled for it to work.

Similar Messages

Disable Webservices access through web

Hi All,
In OFMW and AIA 11g ps3, how can we disable webservices access through web i.e. restrict webservice call from outside
world using OWSM security policies?
We dont want to use username based authentication or any other policies that is based on authentication and authorization.
Please let me know how can we achieve this?
Thanks in advance.

Hi,
I think the best way would be to block the access to services at firewall so that these services have restricted access within the network. This can be achieved only if none of the services need to be exposed over to the internet.
Regards,
Neeraj Sehgal

Disable phone Web access ..

Hi,
we are using UC560 for IP Telephony system and i received complain from end users about that any user know the IP address of IP phone he can access it through the web and view all call history as dialed calls or received calls.
so i need to disable phone web access to protect end user privacy .
kindly advice .
Moe

Hello Moe,
Just to add to what John said there is a technical mistake to stop the web access to the phone you need to enter the following on the UC:
Telephony-service
Service phone webAccess 1
Create cnf-files
For SPA phones you may try the following:
Cisco SPA303, Cisco SPA500 Series
To allow or disallow from the phone viewing of the phone web user interface:
STEP 1 Press the Setupbutton.
STEP 2 To display the Web Server Writable option either:
• Select Network> Enable Web Server.
• Select Settings> Security Configuration> Web Access Enabled.
NOTE This option is available in SPCP mode only.
STEP 3 Press Edit to change the status of the Web Access Enabled parameter.
If the option to edit the parameter is not displayed, press **#to display the option.
If the edit option still does not display,it might be set by your phone system
administrator such that you cannot modify this parameter.
STEP 4 Press Y/ N to toggle the parameter and press ok to set the parameter.
STEP 5 To save your change, press save.
HTH,
Alex
*Please rate helpful posts

Remote Web Access; Disable enom/godaddy check?

Hello, I am trying to setup an existing domain and SSL certificate for use with WinSBS 2011 essentials Remote Web Access.
None of the info in any online guide has been any help (and most irritatingly, and recursively, link to one another); I have used:
http://blogs.technet.com/b/sbs/archive/2011/08/04/how-to-install-your-existing-certificate-into-sbs-essentials.aspx
http://titlerequired.com/2012/03/05/sbs-2011-essentials-manually-installing-ssl-certificate/
etc.
The problem lies in the fact that the "Wizard" believes my current domain name (mydomain.com) to be registered with enom, when I KNOW FOR A FACT IT IS *NOT*. I have an existing domain and an existing wildcard SSL certificate issued for it.
Setting registry value 'UseV2CertificateSupport' = 0 (and restarting the services, as outlined in above links) does not change the behavior.
If I type in any random domain name that either does not exist, or that is (also) not registered with godaddy or enom, I can get to a point in the Wizard setup where I can import the existing certificate, and finish the Wizard. I need to figure out how to
disable this online webservice check for godaddy/enom, or atleast, force the wizard to allow me past this check; as if the check returned "IsGodaddyOrEnom"= false
Posting here is my last resort. Please, Microsoft, please help me fix your terribly implemented RWA setup "wizard".

this may be helpful...
http://forum.wegotserved.com/index.php/topic/23871-setting-up-remote-access-on-own-domain-wo-cert/
Best,
Howtodo

VLAN on RVS4000 disables access to Remote Web Workplace, Outlook Web Access

I have an RVS4000 setup with a VLAN to a wireless "guest" network, guest network is 192.168.1.x, internal network is 10.0.0.x both have Internet access, and cannot see each other, exactly what I wanted. The only problem is that either from the internal network or the guest network I can no longer access the Remote Web Workplace - https://mail.mydomain.com/remote or Outlook Web Access https://mail.mydomain.com/exchange fails with page not found. Internally I can access via \\server\remote and \\server\exchange but of course this does not work for the guest network. We have Small Business Server 2003. External access if fine. I'm assuming this is some kind of routing issue but not sure how to fix. Thanks.

These forums are dedicated to Residential products and services offered by Verizon.
For help on Verizon Wireless issues, please post your topic on the Verizon Wireless community.
Thank you
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

How do I change the URL to the Remote Web Access server in Windows Server 2012?

Hallo!
I have set up a Remote Dexktop Service using the "Quick" deployment method in Server Manager and everything is working greate internally, but I cannot start an app published in Remote Web Access from outside our network.
The problem is that it wants to start the using the internal URL, for example, server.domain.local, instead of the external one, for example remote.server.com.
I therefore want to know how I can change the default URL for the Remote Web Access server and all the Remote Web Apps in Windows Server 2012?
I have allready looked in Server Manager and I can change some of the deployment settings in server manager, but there is no way to alter the URL of the Remote Web Access server. See below images:
Pressing the internal URL only results in opening the internal URL.
This was very simple to do in Windows Server 2008 R2 using the tsconfig tool, but it does not seam to be any way of solving this in server manager.
A possible sollution would be to alter the registry someware in HKLM->Software->Microsoft->Windows NT->Terminal Services. But this can easaly lead to problems due to wrong format, etc. and is probably not supported.
Is there a simpler and supported way?

That option can be used to connect to any machine that you want. The error message indicates that the client machine cannot resolve the name "server.domain.local" to an IP address that it can connect to.
You have several options for configuring that tab on the RDweb site. You can even remove it entirely.
Customization of RD Web Site
RD Web provides a number of customization options for the RD Web interface, including the ability to control default Gateway server settings and redirection settings. These settings
are controlled by editing the web.config file located in %SYSTEMROOT%\Web\RDWeb\Pages.
Displaying Local Help
To display local help for users instead of the web-based help, edit the LocalHelp value and change the value from false to true.

<add key="LocalHelp" value="false" />
When this value is changed, a user that clicks on Help in the upper right corner of the RD Web login page will open the local help file instead of web-based help.
Hiding the Connect to a Remote PC Tab
The RDWeb page
Connect to a Remote PC tab can be hidden from users to prevent connections to any servers through RD Web other than the servers configured in a collection. By default, this setting is set to true and the
Remote Desktops tab is displayed. To hide the tab, set the value to false.

<add key="ShowDesktops" value="true" />
When the value is set to false, a user will not see the Connect to a Remote PC tab when logged on to the RD Web page
RD Gateway Settings
If the Connect to a Remote PC tab is enabled, an administrator can configure RD Web to use a Gateway server when connecting to remote computers. To specify a gateway, edit the below
value with the name of the RD Gateway server:

<add key="DefaultTSGateway" value="" />
The default authentication method for the RD Gateway server can also be configured by editing the following section of the web.config:

<add key="GatewayCredentialsSource" value="0" />
Devices and Resources
By default, only Printers and Clipboard are redirected on connections made using the Connect to a Remote PC tab. If the user clicks the
Options << button, the redirection settings for a specific connection can be modified
To configure each specified redirection option to be enabled or disabled by default, edit the following section in the web.config file:

<add key="xPrinterRedirection" value="true" />
<add key="xClipboard" value="true" />
<add key="xDriveRedirection" value="false" />
<add key="xPnPRedirection" value="false" />
<add key="xPortRedirection" value="false" />
LAN Experience Defaults
Windows Server 2012 RD Web Access can display a new user selectable option for optimizing the connection for a LAN experience. This option is displayed at the bottom of the RD Web
page and can be controlled by the administrator using the following section of the web.config file:

<add key="ShowOptimizeExperience" value="false" />
<add key="OptimizeExperienceState" value="false" />
This value is set to false by default, but when changed to true, the following checkbox will display at the bottom of the webpage. The LAN experience
checkbox can also be set as enabled by default.
Each setting can also be modified using the IIS Manager user interface:
Don Geddes - SR Support Escalation Engineer - Remote Desktop Services - Printing and Imaging

Fix many web access problems with IFS 9.0.1 on Solaris (and other OS's)...

When the installation is done according to the documentation,
web access does not work because the scripts that add entries to
the jserv.properties file add duplicate references to
wrapper.env and wrapper.classpath. Look at the jserv.properties
file below and look at the remarked-out (#) lines of the
duplicate references. For example, look at the references to the
wrapper.env=LD_LIBRARY_PATH
Oracle, please note this bug so the web access problems are
minimized when the product is intstalled.
Thank you,
William T.
# Apache JServ Configuration
File #
################################ W A R N I N G
# Unlike normal Java properties, JServ configurations have some
important
# extensions:
# 1) commas are used as token separators
# 2) multiple definitions of the same key are concatenated in
a
# comma separated list.
# Execution parameters
# The Java Virtual Machine interpreter.
# Syntax: wrapper.bin=[filename] (String)
# Note: specify a full path if the interpreter is not visible in
your path.
wrapper.bin=/d3/Apache/jdk/bin/java
# Arguments passed to Java interpreter (optional)
# Syntax: wrapper.bin.parameters=[parameters] (String)
# Default: NONE
wrapper.bin.parameters=-Xms64m
wrapper.bin.parameters=-Xmx128m
# Apache JServ entry point class (should not be changed)
# Syntax: wrapper.class=[classname] (String)
# Default: "org.apache.jserv.JServ"
# Arguments passed to main class after the properties filename
(not used)
# Syntax: wrapper.class.parameters=[parameters] (String)
# Default: NONE
# Note: currently not used
# PATH environment value passed to the JVM
# Syntax: wrapper.path=[path] (String)
# Default: "/bin:/usr/bin:/usr/local/bin" for Unix systems
# "c:\(windows-dir);c:\(windows-system-dir)" for Win32
systems
# Notes: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters
# Under Win32 (windows-dir) and (windows-system-dir) will
be
# automatically evaluated to match your system
requirements
# CLASSPATH environment value passed to the JVM
# Syntax: wrapper.classpath=[path] (String)
# Default: NONE (Sun's JDK/JRE already have a default classpath)
# Note: if more than one line is supplied these will be
concatenated using
# ":" or ";" (depending wether Unix or Win32) characters.
JVM must be
# able to find JSDK and JServ classes and any utility
classes used by
# your servlets.
# Note: the classes you want to be automatically reloaded upon
modification
# MUST NOT be in this classpath or the classpath of the
shell
# you start the Apache from.
wrapper.classpath=/d3/Apache/jdk/lib/tools.jar
wrapper.classpath=/d3/Apache/Jserv/libexec/ApacheJServ.jar
wrapper.classpath=/d3/Apache/Jsdk/lib/jsdk.jar
# An environment name with value passed to the JVM
# Syntax: wrapper.env=[name]=[value] (String)
# Default: NONE on Unix Systems
# SystemDrive and SystemRoot with appropriate values on
Win32 systems
wrapper.env=PATH=/d3/bin
# An environment name with value copied from caller to Java
Virtual Machine
# Syntax: wrapper.env.copy=[name] (String)
# Default: NONE
# Uncomment the following lines to set the default locale and
NLS_LANG
# setting based on the environment variables.
# wrapper.env.copy=LANG
# wrapper.env.copy=NLS_LANG
# Copies all environment from caller to Java Virtual Machine
# Syntax: wrapper.env.copyall=true (boolean)
# Default: false
# Protocol used for signal handling
# Syntax: wrapper.protocol=[name] (String)
# Default: ajpv12
# General parameters
# Set the default IP address or hostname Apache JServ binds (or
listens) to.
# If you have a machine with multiple IP addresses, this address
# will be the one used. If you set the value to localhost, it
# will be resolved to the IP address configured for the locahost
# on your system (generally this is 127.0.0.1). This feature is
so
# that one can have multiple instances of Apache JServ listening
on
# the same port number, but different IP addresses on the same
machine.
# Use bindaddress=* only if you know exactly what you are doing
here,
# as it could let JServ wide open to the internet.
# You must understand that JServ has to answer only to Apache,
and should not
# be reachable by nobody but mod_jserv. So localhost is usually a
# good option. The second best choice would be an internal
network address
# (protected by a firewall) if JServ is running on another
machine than Apache.
# Ask your network admin.
# "*" may be used on boxes where some of the clients get
connected using
# "localhost"and others using another IP addr.
# Syntax: bindaddress=[ipaddress] or [localhost] or [*]
# Default: localhost
bindaddress=localhost
# Set the port Apache JServ listens to.
# Syntax: port=[1024,65535] (int)
# Default: 8007
port=8007
# Servlet Zones parameters
# List of servlet zones Apache JServ manages
# Syntax: zones=[servlet zone],[servlet zone]... (Comma
separated list of String)
# Default: NONE
zones=root
# Configuration file for each servlet zone (one per servlet zone)
# Syntax: [servlet zone name as on the zones list].properties=
[full path to configFile]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
root.properties=/d3/Apache/Jserv/etc/zone.properties
# Thread Pool parameters
# Enables or disables the use of the thread pool.
# Syntax: pool=true (boolean)
# Default: false
# WARNING: the pool has not been extensively tested and may
generate
deadlocks.
# For this reason, we advise against using this code in
production environments.
pool=false
# Indicates the number of idle threads that the pool may contain.
# Syntax: pool.capacity=(int)>0
# Default: 10
# NOTE: depending on your system load, this number should be low
for contantly
# loaded servers and should be increased depending on load
bursts.
pool.capacity=10
# Indicates the pool controller that should be used to control
the
# level of the recycled threads.
# Syntax: pool.controller=[full class of controller] (String)
# Default: org.apache.java.recycle.DefaultController
# NOTE: it is safe to leave this unchanged unless special
recycle behavior
# is needed. Look at the "org.apache.java.recycle" package
javadocs for more
# info on other pool controllers and their behavior.
pool.controller=org.apache.java.recycle.DefaultController
# Security parameters
# Enable/disable the execution of org.apache.jserv.JServ as a
servlet.
# This is disabled by default because it may give informations
that should
# be restricted.
# Note that the execution of Apache JServ as a servlet is
filtered by the web
# server modules by default so that both sides should be enabled
to let this
# service work.
# This service is useful for installation and configuration
since it gives
# feedback about the exact configurations Apache JServ is using,
but it should
# be disabled when both installation and configuration processes
are done.
# Syntax: security.selfservlet=true (boolean)
# Default: false
# WARNING: disable this in a production environment since may
give reserved
# information to untrusted users.
security.selfservlet=true
# Set the maximum number of socket connections Apache JServ may
handle
# simultaneously. Make sure your operating environment has
enough file
# descriptors to allow this number.
# Syntax: security.maxConnections=(int)>1
# Default: 50
security.maxConnections=50
# Backlog setting for very fine performance tunning of JServ.
# Unless you are familiar to sockets leave this value commented
out.
# security.backlog=5
# List of IP addresses allowed to connect to Apache JServ. This
is a first
# security filtering to reject possibly unsecure connections and
avoid the
# overhead of connection authentication.
# <warning>
# (please don't use the following one unless you know what you
are doing :
# security.allowedAddresses=DISABLED
# allows connections on JServ'port from entire internet.)
# You do need only to allow YOUR Apache to talk to JServ.
# </warning>
# Default: 127.0.0.1
# Syntax: security.allowedAddresses=[IP address],[IP Address]...
(Comma
separated list of IP addresses)
#security.allowedAddresses=127.0.0.1
# Enable/disable connection authentication.
# NOTE: unauthenticated connections are a little faster since
authentication
# handshake is not performed at connection creation.
# WARNING: authentication is disabled by default because we
believe that
# connection restriction from all IP addresses but localhost
reduces your
# time to get Apache JServ to run. If you allow other addresses
to connect and
# you don't trust it, you should enable authentication to
prevent untrusted
# execution of your servlets. Beware: if authentication is
disabled and the
# IP address is allowed, everyone on that machine can execute
your servlets!
# Syntax: security.authentication=[true,false] (boolean)
# Default: true
security.authentication=false
# Authentication secret key.
# The secret key is passed as a file that must be kept secure
and must
# be exactly the same of those used by clients to authenticate
themselves.
# Syntax: security.secretKey=[secret key path and filename]
(String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
#security.secretKey=./etc/jserv.secret.key
# Length of the randomly generated challenge string (in bytes)
used to
# authenticate connections. 5 is the lowest possible choice to
force a safe
# level of security and reduce connection creation overhead.
# Syntax: security.challengeSize=(int)>5
# Default: 5
#security.challengeSize=5
# Logging parameters
# Enable/disable Apache JServ logging.
# WARNING: logging is a very expensive operation in terms of
performance. You
# should reduced the generated log to a minumum or even disable
it if fast
# execution is an issue. Note that if all log channels (see
below) are
# enabled, the log may become really big since each servlet
request may
# generate many Kb of log. Some log channels are mainly for
debugging
# purposes and should be disabled in a production environment.
# Syntax: log=[true,false] (boolean)
# Default: true
log=true
# Set the name of the trace/log file. To avoid possible
confusion about
# the location of this file, an absolute pathname is recommended.
# This log file is different than the log file that is in the
# jserv.conf file. This is the log file for the Java portion of
Apache
# JServ.
# On Unix, this file must have write permissions by the owner of
the JVM
# process. In other words, if you are running Apache JServ in
manual mode
# and Apache is running as user nobody, then the file must have
its
# permissions set so that that user can write to it.
# Syntax: log.file=[log path and filename] (String)
# Default: NONE
# Note: if the file could not be opened, try using absolute
paths.
log.file=/d3/Apache/Jserv/logs/jserv.log
# Enable the timestamp before the log message
# Syntax: log.timestamp=[true,false] (boolean)
# Default: true
log.timestamp=true
# Use the given string as a data format
# (see java.text.SimpleDateFormat for the list of options)
# Syntax: log.dateFormat=(String)
# Default: [dd/MM/yyyy HH:mm:ss:SSS zz]
log.dateFormat=[dd/MM/yyyy HH:mm:ss:SSS zz]
# Since all the messages logged are processed by a thread
running with
# minimum priority, it's of vital importance that this thread
gets a chance
# to run once in a while. If it doesn't, the log queue overflow
occurs,
# usually resulting in the OutOfMemoryError.
# To prevent this from happening, two parameters are used:
log.queue.maxage
# and log.queue.maxsize. The former defines the maximum time for
the logged
# message to stay in the queue, the latter defines maximum
number of
# messages in the queue.
# If one of those conditions becomes true (age > maxage || size
maxsize),# the log message stating that fact is generated and the log
queue is
# flushed in the separate thread.
# If you ever see such a message, either your system doesn't
live up to its
# expectations or you have a runaway loop (probably, but not
necessarily,
# generating a lot of log messages).
# WARNING: Default values are lousy, you probably want to tweak
them and
# report the results back to the development team.
# Syntax: log.queue.maxage = [milliseconds]
# Default: 5000
log.queue.maxage = 5000
# Syntax: log.queue.maxsize = [integer]
# Default: 1000
log.queue.maxsize = 1000
# Enable/disable logging the channel name
# Default: false
# log.channel=false
# Enable/disable channels, each logging different actions.
# Syntax: log.channel.[channel name]=[true,false] (boolean)
# Default: false
# Info channel - quite a lot of informational messages
# hopefully you don't need them under normal circumstances
# log.channel.info=true
# Servlets exception, i.e. exception caught during
# servlet.service() processing are monitored here
# you probably want to have this one switched on
log.channel.servletException=true
# JServ exception, caught internally in jserv
# we suggest to leave it on
log.channel.jservException=true
# Warning channel, it catches all the important
# messages that don't cause JServ to stop, leave it on
log.channel.warning=true
# Servlet log
# All messages logged by servlets. Probably you want
# this one to be switched on.
log.channel.servletLog=true
# Critical errors
# Messages produced by critical events causing jserv to stop
log.channel.critical=true
# Debug channel
# Only for internal debugging purposes
# log.channel.debug=true
#wrapper.classpath=/d3/ord/jlib/ordim.zip
#wrapper.classpath=/d3/ord/jlib/ordhttp.zip
# Oracle XSQL Servlet
wrapper.classpath=/d3/lib/oraclexsql.jar
# Oracle JDBC
wrapper.classpath=/d3/jdbc/lib/classes12.zip
# Oracle XML Parser V2 (with XSLT Engine)
wrapper.classpath=/d3/lib/xmlparserv2.jar
# Oracle XML SQL Components for Java
wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
# XSQLConfig.xml File location
wrapper.classpath=/d3/xdk/admin
# Oracle BC4J
wrapper.classpath=/d3/ord/jlib/ordim.zip
wrapper.classpath=/d3/ord/jlib/ordvir.zip
wrapper.classpath=/d3/ord/jlib/ordhttp.zip
wrapper.classpath=/d3/BC4J/lib/jndi.jar
wrapper.classpath=/d3/BC4J/lib/jbomt.zip
wrapper.classpath=/d3/BC4J/lib/javax_ejb.zip
wrapper.classpath=/d3/BC4J/lib/jdev-rt.jar
wrapper.classpath=/d3/BC4J/lib/jbohtml.zip
wrapper.classpath=/d3/BC4J/lib/jboremote.zip
wrapper.classpath=/d3/BC4J/lib/jdev-cm.jar
wrapper.classpath=/d3/BC4J/lib/jbodomorcl.zip
wrapper.classpath=/d3/BC4J/lib/jboimdomains.zip
wrapper.classpath=/d3/BC4J/lib/collections.jar
wrapper.classpath=/d3/Apache/Apache/htdocs/onlineorders_html
#wrapper.classpath=/d3/Apache/Apache/htdocs/OnlineOrders_html/Onl
ineOrders.jar
# The following classpath entries are necessary for EJBs to run
in IAS or DB when
present
wrapper.classpath=/d3/lib/aurora_client.jar
wrapper.classpath=/d3/lib/vbjorb.jar
wrapper.classpath=/d3/lib/vbjapp.jar
# Oracle Servlet
wrapper.classpath=/d3/lib/servlet.jar
# Oracle Java Server Pages
wrapper.classpath=/d3/jsp/lib/ojsp.jar
# Oracle Util
wrapper.classpath=/d3/jsp/lib/ojsputil.jar
# Oracle Java SQL
wrapper.classpath=/d3/sqlj/lib/translator.zip
# Oracle JDBC
#wrapper.classpath=/d3/jdbc/lib/classes12.zip
# SQLJ runtime
wrapper.classpath=/d3/sqlj/lib/runtime12.zip
# Oracle Messaging
wrapper.classpath=/d3/rdbms/jlib/aqapi.jar
wrapper.classpath=/d3/rdbms/jlib/jmscommon.jar
# OJSP environment settings
#wrapper.env=ORACLE_HOME=/d3
# The next line should be modified to reflect the value of the
SID for your
webserver.
#wrapper.env=ORACLE_SID=cmpdb
#wrapper.env=LD_LIBRARY_PATH=/d3/lib
## Enable the flag below if you are using jdk 1.2.2_05a or above
#wrapper.env=JAVA_COMPILER=NONE
# Advanced Queuing - AQXML
wrapper.classpath=/d3/rdbms/jlib/aqxml.jar
#wrapper.classpath=/d3/rdbms/jlib/xsu12.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/lib/xschema.jar
#wrapper.classpath=/d3/jlib/jndi.jar
wrapper.classpath=/d3/jlib/jta.jar
oemreporting.properties=/d3/Apache/Jserv/oemreporting/oemreportin
g.properties
zones = root, oemreporting
wrapper.classpath=/d3/jlib/share-opt-1_1_9.zip
wrapper.classpath=/d3/jlib/caboshare-opt-1_0_3.zip
wrapper.classpath=/d3/jlib/marlin-opt-1_0_7.zip
wrapper.classpath=/d3/jlib/tecate-opt-1_0_4.zip
wrapper.classpath=/d3/jlib/ocelot-opt-1_0_2.zip
wrapper.classpath=/d3/jlib/regexp.jar
wrapper.classpath=/d3/jlib/sax2.jar
#wrapper.classpath=/d3/jlib/servlet.jar
wrapper.bin.parameters= -DORACLE_HOME=/d3
#wrapper.env=LD_LIBRARY_PATH=/d3/lib32
wrapper.env.copy=DISPLAY
wrapper.bin.parameters=-DORACLE_HOME=/d3
#wrapper.classpath=/d3/lib/vbjorb.jar
#wrapper.classpath=/d3/lib/vbjapp.jar
wrapper.classpath=/d3/classes/classesFromIDLVisi
wrapper.classpath=/d3/jlib/swingall-1_1_1.jar
wrapper.classpath=/d3/jlib/ewtcompat3_3_15.jar
wrapper.classpath=/d3/jlib/ewt-3_3_18.jar
wrapper.classpath=/d3/jlib/share-1_1_9.jar
wrapper.classpath=/d3/jlib/help-3_2_9.jar
wrapper.classpath=/d3/jlib/ice-5_06_3.jar
wrapper.classpath=/d3/jdbc/lib/classes111.zip
wrapper.classpath=/d3/classes
wrapper.classpath=/d3/jlib/oembase-9_0_1.jar
wrapper.classpath=/d3/jlib/oemtools-9_0_1.jar
wrapper.classpath=/d3/jlib
wrapper.classpath=/d3/jlib/javax-ssl-1_1.jar
wrapper.classpath=/d3/jlib/jssl-1_1.jar
wrapper.classpath=/d3/jlib/netcfg.jar
wrapper.classpath=/d3/jlib/dbui-2_1_2.jar
#wrapper.classpath=/d3/lib/aurora_client.jar
#wrapper.classpath=/d3/lib/xmlparserv2.jar
wrapper.classpath=/d3/network/jlib/netmgrm.jar
wrapper.classpath=/d3/network/jlib/netmgr.jar
wrapper.classpath=/d3/network/tools
wrapper.classpath=/d3/jlib/kodiak-1_2_1.jar
wrapper.classpath=/d3/sysman/jlib/netchart360.jar
wrapper.classpath=/d3/jlib/pfjbean.jar
wrapper.env=SHLIB_PATH=/d3/lib32
wrapper.env=LIBPATH=/d3/lib32
wrapper.classpath=/d3/ultrasearch/lib/isearch_midtier.jar
wrapper.classpath=/d3/ultrasearch/lib/isearch_query.jar
wrapper.classpath=/d3/ultrasearch/lib/jgl3.1.0.jar
wrapper.classpath=/d3/lib/mail.jar
wrapper.classpath=/d3/lib/activation.jar
wrapper.classpath=/d3/ultrasearch/jsp/admin/config
# Additions for iFS
## DO NOT REMOVE OR ALTER THE FOLLOWING LINE ....
# iFS true
# Uncomment if you want to use the same Jserv as other
applications
wrapper.classpath=/d3/9ifs/custom_classes
wrapper.classpath=/d3/9ifs/settings
wrapper.classpath=/d3/9ifs/lib/adk.jar
wrapper.classpath=/d3/9ifs/lib/email.jar
wrapper.classpath=/d3/9ifs/lib/http.jar
wrapper.classpath=/d3/9ifs/lib/release.jar
wrapper.classpath=/d3/9ifs/lib/repos.jar
wrapper.classpath=/d3/9ifs/lib/utils.jar
wrapper.classpath=/d3/9ifs/lib/webui.jar
wrapper.classpath=/d3/9ifs/lib/provider.jar
wrapper.classpath=/d3/jlib/javax-ssl-1_2.jar
wrapper.classpath=/d3/jlib/jssl-1_2.jar
wrapper.env=ORACLE_HOME=/d3
wrapper.env=ORACLE_SID=cmpdb
wrapper.env=LD_LIBRARY_PATH=/d3/lib:/d3/ctx/lib:/d3/lib32
wrapper.env=NLS_LANG=.US7ASCII
## Additions for the iFS zone
# Uncomment if you want to use the same Jserv as other
applications
zones=ifs
ifs.properties=/d3/Apache/Jserv/etc/ifs.properties
# End iFS section

About your home page; Manually set up Firefox with the window(s) and tab(s)
the way you want them to be. Then;
'''''Firefox Options > General > Homepage'''''.
Press the button labeled ''''Use Current'''.'
=====================================
Open a new window or tab. In the address bar, type '''''about:config'''''.
If a warning screen comes up, press the '''''Be Careful''''' button.
This is where Firefox finds information it needs to run.
At the top of the screen is a search bar. Enter '''''browser.newtab.url'''''
and press enter. '''''browser.newtab.url'''''
tells Firefox what to show when a new tab is opened.
If you want, right click and select '''''Modify'''''. You can change the
setting to; about:home (Firefox default home page), 
about:newtab (shows the sites most visited), 
about:blank (a blank page), 
or you can enter any web page you want. 
The same instructions are used for the new window setting, listed as
'''''browser.startup.homepage'''''.

Windows Home Server 2011, How to Turn off Remote Web Access for Dashboard completely?

I have a Dell Server at my House and i thought it would be a good idea to use it to run a website on so, i set up Apache and get it installed. But then every time I type http://localhost/ it would always Come up with the remote web access! So i thought
ok no problem you can disable that in Dashboard. Well i was wrong when i typed http://loacalhost/ it came up with the Proceed Anyways option but sent me to a Big
Bad GateWay. So what im trying to get at is i need to Fully Disbale that Remote Web access or Set a specific Port so it does not interfere with port 80. So does any one know how to fix this or get rid of this issue?

This one may help.
http://technet.microsoft.com/en-us/library/remote-access-overview.aspx
I'd ask them more over here.
http://social.microsoft.com/Forums/en-us/home?forum=whs2011
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows 8.1 pro Remote App crashes connecting to 2012 Remote Desktop Web Access published application

Using 2012 Remote Desktop Web access to gain access to published applications. The workstation was a Windows 8.1 (home) upgraded to Windows 8.1 Pro with the Media Center add on. Launching the url to the login page for the RDW works fine. When the app is
clicked on to launch the Remote App crashes. How do I get it to properly connect. Other Windows 8.1 pro workstations work. Although none were upgraded from the 8.1 (home) Here is the event.
Faulting application name: mstsc.exe, version: 6.3.9600.16384, time stamp: 0x5215e2b5
Faulting module name: ntdll.dll, version: 6.3.9600.17031, time stamp: 0x530895af
Exception code: 0xc0000005
Fault offset: 0x0000000000065e8e
Faulting process id: 0xab4
Faulting application start time: 0x01cf5f2ed029e83f
Faulting application path: C:\Windows\System32\mstsc.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 21a471d6-cb22-11e3-8263-a0886933dd25
Faulting package full name:
Faulting package-relative application ID:

More info.
The computer is brand new HP.
Windows 8.1 pro with media center
processor Intel i7-4700mq - 12gig ram -64bit
Full windows touch support with 10 touch points
The computer is connecting to a 2012 Server hosted on Microsoft's Azure platform. Trying to access applications hosted by this server with Remote Desktop Web services. The computer can RDP using just the mstsc.exe to other computers and to the server with
no problem.
The computer presents the following msg box Body: Remote Desktop Connection has stopped working. I have tried the following to resolve this and narrow the scope:
-Created a new user account for the computer with admin rights, rebooted and logged in as the new user.
-Tried a different user account for the portal, that does work. The user does not show up as connected.
-All MS updates were loaded.
-Added these changes to the registry to keep alive the connection: HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Gateway\Transports\Rpc-----HttpKeepAliveTimeout=dword:00000001
And HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client----RDGClientTransport=dword:00000001
Loaded this update http://support.microsoft.com/kb/2919394/EN-US
-Removed all printers
-Removed Antivirus
-Added the server to HKEY_CURRENT_USER\Software\Microsoft\Terminal Server Client\Default
-Disabled everything in MSCONFIG startup
-Ran sfc /scannow as administrator - no integrity violations
Any suggestions?

Making changes to web access phone setting CUCM 8.6.2

Hello,
I have a question on a change I need to make on our Call Manager. We use the Berbee Informacast product for emergency notification. It requires that the Web Access parameter be enabled on the individual phones in order to send audio broadcasts. I have learned that after a certain version of CUCM (8.6 perhaps) this setting was set to disable by default on the Enterprise Phone Configuration section on CUCM. We have had this version running about a year now and many many phones have been installed since then. These phones have the web access disabled I believe because of this being disabled on the server settings side. My question is this...
Would it be better to go into System > Enterprise Phone Configuration>Web Access setting and set to enable
or
Do a bulk edit on all phones to enable, reset phones.
What I am not sure about also is if I change on the system side if it will automatically update and reset phones.
Just not clear on the right path to take on this...
Any ideas?
Thanks,
-Nick

Thanks for the great info. This is what I did.
Changed web access to enabled in Enterprise Phone Configuration. Clicked Ok, manually rebooted a couple of phones with no web access. Still didn't work.
Changed web access to enabled in Device>Device Settings>Common Phone Profile>Standard Common Phone Profile. Clicked Save and rebooted the same two phones. Worked great.
Ran job scheduler to reboot all phones (1600 of them) and all seems to be good now.
Thanks again Chris!

Can't download files on Android from Server 2012 Essentials Remote Web Access

I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011. Employees like using Remote Web Access to log in from anywhere and have access to shared folders. It works perfect on a Desktop computer, but when they try to
use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails. When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
separately to make this happen?
I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
but eventually after a few minutes, will time out and show "Download Unsuccessful".
Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
UPDATE: I found this in the event handler when I tried to download something from a mobile device...
- System
- Provider
[ Name] ASP.NET 4.0.30319.0
- EventID 1309
[ Qualifiers] 32768
Level 3
Task 3
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-01-12T16:49:12.000000000Z
EventRecordID 72818
Channel Application
Computer MYSERVER.MYDOMAIN.local
Security
- EventData
3005
An unhandled exception has occurred.
1/12/2014 11:49:12 AM
1/12/2014 4:49:12 PM
953eedf1ad414391a193e5f98a281da5
263
3
0
/LM/W3SVC/1/ROOT/Remote-1-130340167702975633
Full
/Remote
C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
MYSERVER
2592
w3wp.exe
NT AUTHORITY\NETWORK SERVICE
HttpException
Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
/Remote/fs/MobileDownload.aspx
MY.IP.ADDRESS.141
MYDOMAIN\user
True
Forms
NT AUTHORITY\NETWORK SERVICE
31
NT AUTHORITY\NETWORK SERVICE
False
at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Hi,
Before going further, would you please let me confirm something firstly?
Would you please let me know if all Android devices
encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
the Android device, will still fail to download?
Please check if there has enough free space in Android devices that be used to save download.
When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
it can find. Then monitor the result.
Run the Windows Server 2012 Essentials Best Practices Analyzer
http://technet.microsoft.com/en-us/library/jj200181.aspx
In addition, regarding to the Event ID 1309, please refer to the following articles.
Event ID: 1309 Source: ASP.NET 4.0.30319.0
http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
Hope this helps.
Best regards,
Justin Gu

Hyperlinks don't work in Visio Web Access

Hi guys,
I need a little help here. I'm using Visio Web Access (Sharepoint 2010). My shapes have 1 hyperlink each. When I publish these files, sometimes it's possible to simple click on the shape to go to the hyperlink, but sometimes it doesn't work at all.
Can anybody help me, please?
Thanks in advance!
Ju Yoko

Hi,
I have a test with Firefox, the hyperlink behind the shape doesn’t work as expected. You can try this workaround:
Edit the page in Firefox and Edit the Visio Web Access web part.
Check ‘Disable Hyperlink’ under ‘Web Drawing Interactivity’ tab.
Then save the changes.
Edit the web part again to uncheck ‘Disable Hyperlink’. Save the changes.Now the hyperliks will work.
I have a test with Firefox and IE9 and this workaround works. I don’t have Google Chrome installed, you can have a test.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Send to ERP option in Primavera Web Access

Dear All,
Even the user is authorized to send data to ERP, Send to ERP option is disabled in primavera web access. Any suggestion please share with me.
Barathidasan

A couple of things to note:
1.) The web install is separate from the client.
2.) An application server (WebSphere or Weblogic) must be setup and configured for the web to be deployed.
If you simply ran a stand-alone P6v7 install this will not install the web portion.
While I would not necessarily advise running P6v7-Web against a stand-alone database for production use, it is certainly possible (I have done this myself for testing). First thing you'll want to look at it is "Installing P6 Web Access" page 139 / 452 in the admin guide.

HOW TO DISABLE WEB CONSOLE IN A 2950 CISCO SWITCH

HOW TO DISABLE WEB CONSOLE IN A 2950 CISCO CATALYST SWITCH ?

I have disabled HTTP access but enabled HTTPS access on my switches.
switch(config)#no ip http server
(this will disable web or http access)
switch(config)#ip http secure-server
(this will enable https access or no ip http secure-server will disable https access)

Disable web access

Similar Messages

Maybe you are looking for