Disable Wi-Fi Connected Warning Messages

How can I disable "wi-fi connection is limited" warning messages in my hub, but without turning off my wi-fi. I know my wi-fi is unstable at home and when I'm on the road at hotels, but these constant messages are cluttering my hub and keep turning my phone's message notification light on. Thanks.

I don't have any particular reason to suspect my Z30 phone since my notebook computer has the same connection issue dropping in and out. It's also not a problem for either my Z30 or notebook when I'm around a stable Wi-Fi access point.
The symbol in the top right corner is more than sufficient to warn me of a bad Wi-Fi connection, and it's not like I get similar warnings in my hub everytime my 4G voice or data connection drops.
If anyone knows a way to turn the Wi-Fi connection warnings off, please share. Thanks!

Similar Messages

How can I disable the low ink warning messages.

How can I disable the low ink warning messages. The Photosmart Plus B210 printer is connected wirelessly to my Mac over a home network..

Open up a terminal (use spotlight to search for 'terminal')
Find the process ID of the HP Device monitor by doing
ps -eo pid,command | grep "HP Device Monitor"
The process id will be the number that is printed. Sometimes you may see two results, the correct result to use should print "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
Then using the number you got from the first step, run the following command.
sudo kill -9 <pid>; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"
You will be prompted for your admin password.
Below is an example of when I ran it:
John-MacBook-Pro:~ john$ ps -eo pid,command | grep "HP Device Monitor"
90509 /Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor
90513 grep "HP Device Monitor"
John-MacBook-Pro:~ john$ sudo kill -9 90509; sudo rm -rf "/Library/Printers/hp/hpio/HP Device Monitor.app/Contents/MacOS/HP Device Monitor"

Disable a standard AMImpl Warning message through Customization

Hi Team,
Through Customization apporach, can we disable standard Warning Message(in AMImpl) through Custom Manage Bean.
If so can you please tell me approach & sample code to be written.
Thanks,
Anil

Anil
I am not sure of the exact use case you have in mind. However, AMImpl or any other java file is not customizable by any means.
Hope this helps
Thanks
Vik

Is it possible to disable Mandatory Task Sequence Warning Message ?

Hello,
When I deploy a mandatory OSD task sequence, the client pc's receives the request, however, a "Mandatory Task Sequence" messages appears saying that the OS deployment will commence in 180 seconds.
Is there an option to disable this warning or reduce the timeout value of 180 seconds ?
Thanks
Imran
Imran

Hi,
The following thread might be helpful, although it is for SCCM 2007.
http://social.technet.microsoft.com/Forums/systemcenter/en-US/da7b304b-457e-4fff-bcb9-d40ceb0675ec/configuration-manager-mandatory-task-sequence-warning?forum=configmgrosd
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Disable "server connection interrupted" message

Does anyone know if there is a way to disable the "server connection interrupted" message that appears when a connected server goes down. This message serves no purpose. It presents the user with the choice to either "ignore" or "disconnect", but choosing either one causes the disk to unmount. A message box is unnecessary if both of the choices it presents have the same outcome. I'd be much happier if the disk just automatically unmounted in the background.
thanks

I'd like to disable this dialog as well. I know the server connections are interrupted. That happens when I pull the network cable out. In my case it makes absolutely no difference whether I hit "Ignore" or "Disconnect". You're a Mac, just do what you have to and don't bug me about it!

Disable warning message of firewall optionnal

hi ,
i have configured firewall setting ,on concentrator vpn for optionnal and this setting give a warning message one connected on the client vpn ,
i want to disable this warning fro users .
is it possible ?
thank for your help
best regards

that error is comming for ur Config, So u cannt Skip that message from BAPI returns, try to change CostCenter or Docuent Type.
regards
Prabhu

Disabling untrusted connection warning, or adding issuer without certificate?

I am using Firefox (20) in an environment where I am required to use a proxy to access any external websites, and the proxy has recently been changed in such a manner that it now intercepts HTTPS requests and seems to reissue the certificates from a new identity.
This means that every page I visit that uses HTTPS shows the 'untrusted connection' warning page. I can, of course, add exceptions - but I don't want to have to do this for every secure page (and every subdomain, including those only used for serving up images or stylesheets, etc).
Is there any way to.. disable the warning page? Add an exception for "*"? Add the identity that the certificates are being reissued under to my trusted list (I don't have access to the certificate file)?
Neither Chrome or IE exhibit this behaviour under the same conditions.
NB: Troubleshooting info attached is from a different computer.

You will have to acquire the root certificate of this proxy and install it in Firefox to prevent such an untrusted message.<br />
If you have this certificate in IE or Google Chrome then export it and import in Firefox.<br />
You can inspect the certificate chain in those browser to see how they link it to a built-in root certificate.<br />
You need to set the trust bit to trust this certificate for web pages.

Disable warning message in MB1A during BDC

Hi,
I am posting the goods issue records into SAP through MB1A in BDC. However the warning message finally becomes the return message of the BDC call and the action is failed. Actually it can be skipped by doing the transaction manually.
Any solution can be used to disable the warning?
Thanks.
Angus.

that error is comming for ur Config, So u cannt Skip that message from BAPI returns, try to change CostCenter or Docuent Type.
regards
Prabhu

Warning messages thrown while trying to connect to BW Cube

We have Websphere Application Server to deploy our servlets. The problem is when we connect to BW Server through BI Java SDK, it generates the following WARNING messages:
[2/9/06 17:48:14:682 CET] 179cdd40 SystemOut     O Warning ! Protocol Implementation [com.sap.engine.services.webservices.jaxrpc.wsdl2java.features.builtin.MessageIdProtocol] could not be loaded (NoClassDefFoundError) !
[2/9/06 17:48:14:682 CET] 179cdd40 SystemOut     O Error Message is :com/sap/guid/GUIDGeneratorFactory
[2/9/06 17:48:14:688 CET] 179cdd40 SystemOut     O Warning ! Protocol Implementation [com.sap.security.core.client.ws.SecurityProtocol] could not be loaded (ClassNotFound) !
[2/9/06 17:48:14:688 CET] 179cdd40 SystemOut     O Error Message is :com.sap.security.core.client.ws.SecurityProtocol
[2/9/06 17:48:20:325 CET] 179cdd40 SystemOut     O Warning ! Provider [SecurityProtocol] not found for feature in logical port [MsXmlAnalysisSoap] !
[2/9/06 17:49:25:069 CET] 179cdd40 WebGroup      I SRVE0180I: [Shell-CCL] [/Shell-CCL] [Servlet.LOG]: /jsps/cclMyOrderHistory.jsp: init
[2/9/06 17:51:00:564 CET] 179cdd40 WebGroup      I SRVE0180I: [Shell-CCL] [/Shell-CCL] [Servlet.LOG]: CCLMyOrderHistoryDownloadServlet: init
[2/9/06 22:08:23:755 CET] 7b749d56 SystemOut     O Warning ! Protocol Implementation [com.sap.engine.services.webservices.jaxrpc.wsdl2java.features.builtin.MessageIdProtocol] could not be loaded (NoClassDefFoundError) !
[2/9/06 22:08:23:755 CET] 7b749d56 SystemOut     O Error Message is :com/sap/guid/GUIDGeneratorFactory
[2/9/06 22:08:23:762 CET] 7b749d56 SystemOut     O Warning ! Protocol Implementation [com.sap.security.core.client.ws.SecurityProtocol] could not be loaded (ClassNotFound) !
[2/9/06 22:08:23:762 CET] 7b749d56 SystemOut     O Error Message is :com.sap.security.core.client.ws.SecurityProtocol
[2/9/06 22:08:24:943 CET] 7b749d56 SystemOut     O Warning ! Provider [SecurityProtocol] not found for feature in logical port [MsXmlAnalysisSoap] !
Any clues on this one. What causes this and why?
Thanks in advance.

http://otn.oracle.com/tech/java/sqlj_jdbc/htdocs/jdbc_faq.htm#_59_
The thin drivers are classes12.zip/classes111.zip. classes12.zip being the most recent release. You can download it from
http://otn.oracle.com/software/tech/java/sqlj_jdbc/htdocs/winsoft.html
(the general download site is http://otn.oracle.com/software/tech/java/sqlj_jdbc/content.html )
Jamie

Windows 7 computers show a Valid Trust Anchor warning message when connecting to corporate wireless

We are currently using EAP-TLS Microsoft:Smart Card or certificates" as the Authentication Method on our Radius/NPS server for authenticating domain laptops to be enable to connect to corporate wireless network.
We have a Windows 2003 Root& Issuing CA which has published computer certificates to all the domain laptops/workstations. We have also setup a parallel PKI ( Root and Issuing CA) setup on Windows 2012 OS in the same domain.
This Windows 2012 ISsuing CA has also deployed computer certificates to a cpl of testing domain workstations. So the end result, each of these testing workstations has 2 computer certificates in its PERSONAL Store for client/server auth (1)
One issued by the Windows 2003 CA (2) Other cert issued by the Windows 2012 CA.
We are noticing that windows 7 laptops are throwing a warning message similar to as shown below . I have verified that the ROOT certificate coming from both the CA's described above, is present in the ROOT TRUSTED CERTIFICATION AUTH Store on each of these
Windows 7 laptops. Surprisingly, we don't get this same warning on Windows 8 or 8.1 laptops.
Also, if i hit the CONNECT button, i am able to connect to the wireless,
but then i don't see the "Security " Tab anymore under properties of the wireless profile (SSID). I found on some forums to click on the Security Tab and further click on "SETTINGS" and check if the ROOT CA cert is present
in the Trusted Root Certification Authorities” list, . I dont get these options anymore after connecting.
These options do show up on Windows 8 machines after connecting.

in the wireless connection properties, in the dialog authentication properties you need to select root CAs which are eligible to issue RADIUS server certificates:
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.

My ipod is disabled and says connect to itunes. I am not able to get the message about restore??

Ipod touch is disabled and says connect to itunes. I have followed all of the steps but am not getting the message to restore.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

To remove warning message " CONNECTION TO LIVE CACHE FAILED"

Hi,
I am working on a stand alone SNC system , and I am testing it .
We have not installed Live cache in this system
We are creating master data directly in SNC system
never faced issue while creating location , Business partner
But while creating Product and location product as master go following warning message " CONNECTION TO LIVE CACHE FAILED"
once I click on CREATE , but if I press enter instead it takes me to following screens for master creation
We have even deactivate the live CACHe but still get this warning message,
H0w can i remove this warning mesaage and get in the following master creation screens directly
Regards
Manas Malhotra

Hi Experts,
IN the above issue i mentioned , forgot to tell you that once i try to save product or location product it again give me the same error and doent have the master
but once SNC is a stand alone system should save it even with out the live cache
there should be some setting to make this system not depended on live cache and still save all the data
please help with this
Regards
Manas

Warning: MDB application is NOT connected to messaging system on console

An application works on weblogic 8.4 recently upgraded to weblogic 10.3 with Foriegn JMS server configuration.
<foreign-server name="Fax JMSServer">
<notes>The Foreign JMS Server Confirm uses to talk to Fax</notes>
<default-targeting-enabled>false</default-targeting-enabled>
<foreign-destination name="FaxReplyQueue">
<local-jndi-name>com.foo.jms.FaxReplyQueue</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxReplyQueue</remote-jndi-name>
</foreign-destination>
<foreign-destination name="FaxRequestQueue">
<local-jndi-name>com.foo.jms.FaxRequestQueue</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxRequestQueue</remote-jndi-name>
</foreign-destination>
<foreign-connection-factory name="mq-jms-ConnectionFactory">
<local-jndi-name>com.foo.jms.FaxConnectionFactory</local-jndi-name>
<remote-jndi-name>com.foo.mq.FaxConnectionFactory</remote-jndi-name>
</foreign-connection-factory>
<initial-context-factory>com.sun.jndi.fscontext.RefFSContextFactory</initial-context-factory>
<connection-url>file:/C:/bea/mqJNDI</connection-url>
</foreign-server>
Upon deployment, an warning message "MDB application is NOT connected to messaging system" occurs on the weblogic 10 console for one of the MDBs. In log file you can find the following message:
<Oct 27, 2009 4:35:15 PM EDT> <Warning> <EJB> <BEA-010061> <The Message-Driven EJB: FaxNotificationBean is unable to connect to the JMS destination: com.foo.jms.FaxReplyQueue. The Error was:
Can not get distribute destination information. The destination JNDI name is com.foo.jms.FaxReplyQueue, the provider URL is null>
The following is the annotations of the MDB in workshop.
@ForeignJmsProvider(connectionFactoryJndiName = "com.foo.jms.FaxConnectionFactory")
@JndiName(remote = "com.foo.faxmgr.ejb.FaxNotificationBean")
@MessageDriven(defaultTransaction = MessageDriven.DefaultTransaction.NOT_SUPPORTED,
     destinationJndiName = "com.foo.jms.FaxReplyQueue",
ejbName = "FaxNotificationBean",
durable = Constants.Bool.FALSE,
transTimeoutSeconds = "0",
     destinationType = "javax.jms.Queue",
     initialBeansInFreePool = "1",
     maxBeansInFreePool = "10"
I googled and found the same questions asked before but no working answers. Does anybody know what's wrong with my MDB? BTW, it works the same way in weblogic 8.4 platform.
I even tried to add resource refs as below but the same warning message is still there. TIA.
@ResourceRefs(
     {@ResourceRef(name="com.foo.jms.FaxConnectionFactory",
     jndiName="com.foo.jms.FaxConnectionFactory", type="javax.jms.QueueConnectionFactory",
     auth=ResourceRef.Auth.CONTAINER, sharingScope=ResourceRef.SharingScope.UNSHAREABLE),
     @ResourceRef(name="com.foo.jms.FaxConnectionFactory",
          jndiName="com.foo.jms.FaxConnectionFactory", type="javax.jms.QueueConnectionFactory",
          auth=ResourceRef.Auth.CONTAINER, sharingScope=ResourceRef.SharingScope.UNSHAREABLE)}
)

Hi,
We have had this same issue and the problem was diagnosed as a Oracle listener.ora issue with the OIM database connection not beining configured to use it's 1522 connection but using the default 1521 so it was just sat there not knowing that it's port should be 1522.
Regards,
Simon

Disable Warning Message

Each time I perform an action in Forms, I have the following Message Code ('Do you want to save the changes you have made ?').
For instance, when I perform an execute_Query ...
I would disable these warning Messages ... ?Is it possible ?
Tx in advance,
Xav.

I have to perform a search.
I explain ...
I have a form with 5 tabs in which I have 90 fields. I need to perform a search on 20 of these fields.
So, we have created a sixth tab with these 20 fields (they are on NO Data Base Item).
The user can enter or not a value in the fields and then it click on a button that starts the EXEC_QY function.
So, when the button is pressed. I create the WHERE_CLAUSE of my block, using only the fields that have been entered by the user.

TS1538 I have restored my ipad 2 but it still will not let me in. It gives the message iPad is disabled...connect to iTunes

I have restored my ipad 2 but it still will not let me in it. It gives the message iPad is disabled...connect to iTunes. I already connected to iTunes and went right back to message.

Try using recovery mode. You want to use the computer that you use for syncing your iPad so that you can restore from a backup at the end of the process.
http://support.apple.com/kb/HT4097?viewlocale=en_US&locale=en_US
If you have an iCloud backup, you can restore from that as well. If you have no backups, you will end up losing everything on the iPad and will have to start all over again.

Disable Wi-Fi Connected Warning Messages

Similar Messages

Maybe you are looking for