Disable Windows services in UCCE

Hi all,
Is there a list / doc that describes all the compulsory Windows services that needs to be running for UCCE? The only one found was for CCMP in the ICM BOM.
Thanks!
-JT-

Please post your question on SDK forum and close this one.
Thanks,
Gordon

Similar Messages

Itunes 12.1.1.4 latest download has disabled Bonjour Services even thou windows task manager shows running and apple TV's no longer show as shared even though sharing switched on any solutions??

Windows latest download of iTunes has disabled Bonjour Services a message to restart says go to settings?? there is no settings in iTunes only preferences
Apple TV's says start sharing on compute? ITunes Home Sharing started Windows Task Manager says Bonjour Services running yet unable to share from computer to any Apple TV in the home is this another Apple programming bug

Windows latest download of iTunes has disabled Bonjour Services a message to restart says go to settings?? there is no settings in iTunes only preferences
Apple TV's says start sharing on compute? ITunes Home Sharing started Windows Task Manager says Bonjour Services running yet unable to share from computer to any Apple TV in the home is this another Apple programming bug

How to disable a specific windows service from a monitor?

Hi,
Recently I created a SCOM 2012 R2 Pool to mange around 40 Win 2012 servers, however from the first day i got heaps of RemoteRegistry Services stopped alert.
What i want to do is to disable the RemoteRegistry Service monitoring, but still can hear the voice from other services.
From the Service Alert Monitor : "Service Running State", i have following options to disable
1.: For the object: RemoteRegistry, it's OK, but i don't want to do it 40 times.
2.For the objects of Class: Windows.ServiceClass: it will disable all Service monitoring
3. For a group: same, stop all services
4 . For a Specific object of class: Windows.SersviceClass, i can't choose multiple servers.
5. For all objects of another class: no idea what to choose.
Anyone has same experience like this? thanks!

You will need to Select override For all objects of class:
Class and disable monitoring Services and select enforce to ensure that applied.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

Restart of DSEE 7 service disables other windows service

Hello,
I am using DSEE 7.0 ZIP Distribution. I have registered the DSEE 7 as an windows service.
1) Through Windows service manager when i restart the DSEE 7, restart happening correctly.
2) When i restart my custom c++ services (used in our project), This custom services should stop & start other 10 services.
Custom service is able to stop all 10 services. But it could not able to start the services. All the 10 services are moved to the "Disabled" state.
3) Through Windows service manager when i again restart the DSEE 7, all the 10 services get started automatically.
Kindly provide me a solution in order to solve this problem
Regards,
Srini

How can I get machine information(win 9x/win NT) and
the details of service pack installed on the machine
using java? I have got all the relevant machine
properties using system class(System.getProperties())
but could not get service pack details using the
same. Is there any other way to get all the
information?Question: this is all Windows-specific stuff. Why in heck do you use Java for that? It's like using pliers to remove a screw. Yes, it may work, but there are no less elegant ways.

Help, which windows Service msut be on to run Adobe Bridge CS3?

hi all,
I'm having trouble opening Adobe Bridge CS3, theres a windows popup that says "Adobe Bridge has encountered a problem and needs to close" error message when i try to start.
I can run the other Adobe Cs3 applications fine, i've been playing around with the disabling of windows services to increase bootup time. i'm afraid i may have accidentally disabled something necessary
pls advice on how to get it working.. i'm on win xp pro sp2
thanks

When you get the "Bridge has encountered an error" popup box, check the technical info hyperlink to see what's the problem. It may point to a DLL that had an error.
From there, check the web to see what that DLL relates to, which may or may not give you a lead. Maybe something that needs to be running in WinXP, maybe a 3rd party product that needs to be fixed/removed/re-installed.
Why do I say this? I had the same issue on Bridge after getting the trial version. Worked for a while, then suddenly stopped working with the same startup dialog box and a quick shutdown. Digging a bit as above pointed to a DLL that was related to Quicktime. I went to the Apple site and downloaded/installed the latest version of Quicktime, and the Brige problem was cured.

Disable online services/features in Acrobat Reader DC?

With the new update being released from Reader to Acrobat Reader DC, I have concerns with the use of cloud storage and storing sensitive data.
I have looked around and the only information I have found for disabling these new features are in reference to groups who use the Acrobat Customization Wizard DC, which means they would be running an Enterprise version.
I have installed and tested the new Acrobat Reader DC on both Windows and OS X, there are no obvious options for disabling the services that I am referring to.
Services I am referencing:
Adobe cloud storage service
Sending and tracking documents
Syncing across multiple devices (by use of cloud storage)
Is there a way to disable the use of these services on an individual (non Enterprise) install of Acrobat Reader DC?
Thanks in advanced!

You can use the Adobe Customization Wizard DC on both Reader DC (Classic or Perpetual) versions.
Adobe Customization Wizard
You can also use the Windows Registry to turn these services OFF.
Services integration
Workflows (Services integration)
These preferences enable integration with Document Cloud services.
This preference category contains the following subfeature(s):
Mobile Link
Services (Acrobat.com: 11.x and earlier)
Services (EchoSign: 11.x and earlier)
Services (SharePoint-Office365)
Services integration (11.x and earlier)
Services integration (DC)
Synchronizer
Services integration (DC)
These settings for DC products replace those used by 11.x and earlier. By default, Adobe online services are tightly integrated with the user interface so that users can leverage them in enterprise workflows. Adobe's services are rapidly evolving and allow your organization to increase its efficiency with zero infrastructure and management costs.
Summary table
bAdobeSendPluginToggle
Toggles the Adobe Send and Track plugin for Outlook
bToggleAdobeDocumentServices
Disables all service access except those features controlled by the other preferences.
bToggleAdobeSign
Disables Adobe Send for Signature (formerly EchoSign).
bTogglePrefSync
Disables preferences synchronization.
bToggleWebConnectors
Disables 3rd party connectors.
bUpdater
Disables both updates to the product's web-plugin components as well as all services.
bUpdater
Top > Workflows > Services integration (DC) > bUpdater
Data type
boolean: DWORD value > REG_DWORD
Default
Version #
DC
HKLM Path
HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cServices
Summary
Disables both updates to the product's web-plugin components as well as all services.
Details
This new preference replaces the now deprecated HKCU services master switch bEnableAcrobatHS. It disables both updates to the product's web-plugin components as well as all services without exception, including any sign-in screen. The setting is not the same as bUpdaterwhich resides directly under FeatureLockdown and disables product updates. Possible values include:
0: Disable services and service component updates.
1: Enable services.
bToggleAdobeDocumentServices
Top > Workflows > Services integration (DC) > bToggleAdobeDocumentServices
Data type
boolean: DWORD value > REG_DWORD
Default
null
Version #
DC
HKLM Path
HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cServices
Summary
Disables all service access except those features controlled by the other preferences.
Details
This setting does not affect Adobe Send for Signature, preference synchronization, or third party connectors. Possible values include:
0: Enable Document Cloud services.
1: Disable Document Cloud services.
bToggleAdobeSign
Top > Workflows > Services integration (DC) > bToggleAdobeSign
Data type
boolean: DWORD value > REG_DWORD
Default
null
Version #
DC
HKLM Path
HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cServices
Summary
Disables Adobe Send for Signature (formerly EchoSign).
Details
Possible values include:
0: Enable Adobe Send for Signature.
1: Disable Adobe Send for Signature.
bTogglePrefSync
Top > Workflows > Services integration (DC) > bTogglePrefSync
Data type
boolean: DWORD value > REG_DWORD
Default
null
Version #
DC
HKLM Path
HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cServices
Summary
Disables preferences synchronization.
Details
This preference disables and locks a new feature which synchronizes desktop preferences across devices on which the user is signed in with an Adobe ID (including phones). Possible values include:
0: Ensable preferences synchronization.
1: Disable preferences synchronization.
bToggleWebConnectors
Top > Workflows > Services integration (DC) > bToggleWebConnectors
Data type
boolean: DWORD value > REG_DWORD
Default
null
Version #
DC
HKLM Path
HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cServices
Summary
Disables 3rd party connectors.
Details
Allows configuring in-product access to third party servicesfor file storage. Possible values include:
0: Enable 3rd party connectors.
1: Disable 3rd party connectors.
bAdobeSendPluginToggle
Top > Workflows > Services integration (DC) > bAdobeSendPluginToggle
Data type
boolean: DWORD value > REG_DWORD
Default
1
Version #
DC
HKCU Path
Workflows
HKLM Path
HKLM\SOFTWARE\Policies\Adobe\(product name)\(version)\FeatureLockdown\cCloud
Summary
Toggles the Adobe Send and Track plugin for Outlook
Details
When enabled, an Adobe Send and Trackbutton appears in Outlook when composing an email. It enables sending large files as public links through Outlook. The attached files are uploaded to Adobe Document Cloud and public links to the files are inserted in the email body. Recipients can click the link to preview the file in a browser window and can download the file if needed. Possible values include:
0: Disable Adobe Send and Track.
1: Enable Adobe Send and Track.

Problems with Comodo Kill Switch, Windows Services & Bitlocker Encryption on Asus N56VZ

Hi All,
So recently I found myself stuck in a different scenario than before, and after many hours researching and efforts to fix this I still find myself stuck yet with a few options still to fix.
What is the problem?
So as a security cautious user when i first got to Windows 8.1 Pro 64Bit I encrypted both the C and D drive (Split the main disk) to protect myself and my family. Unfortunately that has not been very helpful with the way in which booting and running from
either external USB devices or CD/DVD works, not allowing myself to at all.
My usual security suit I use is Comodo Internet Security, which additionally comes with Comodo Kill Switch. Whilst using the application instead of stopping one of the TCP connections I was meant to I accidently stopped an Windows Explorer connection.
For some reason since then Windows Explorer, nor most windows apps or services themselves will run. For example msconfig will run but sfc /scannow or mmc will not, whether in safe mode or normal mode.
What Caused the Problem?
Cannot 100% say
What I Think Caused the Problem?
Myself running Comodo Kill Switch stopping a vital server connection with Windows Explorer that messed up alot. Or a potential Virus unknown how cannot fully scan system as wont boot externally or run many apps.
Additional Info
Asus Webcam is Disabled on Purpose
Laptop was fully customized to run latest games full graphics minus Anti Aliasing, works with Evolve + CoD Advanced Warfare
Laptop does not boot if USB Keyboard plugged in, works with everything else normal (had this on other systems no problem for me)
Ask me for more info if required to add here, braindead again
Specifications of my system
Intel® Core™ i7 3610QM Processor
Windows 8.1 Pro 64Bit
Intel® HM76 Chipset
DDR3 1600 MHz SDRAM, 2 x SO-DIMM 8GB
15.6" HD (1366x768)/Full HD (1920x1080)/Wide View Angle LED Backlight
NVIDIA® GeForce® GT 650M with 2GB DDR3 VRAM
1TB 5400RPM OR 750GB 5400/7200RPM (Cannot remember off top of head, braindead)
Super-Multi DVD
Kensington lock (Security Feature)
LoJack (Security Feature)
BIOS Booting User Password Protection (Security Feature)
HDD User Password Protection and Security (Security Feature)
Pre-OS Authentication by programmable key code (Security Feature)
What Can Run and Won't Run?
ON BOOT:
Bitlocker Encryption Password & Advanced Settings are accessible
Bios (password protected) is accessible
Windows Recovery Mode is accessible (Think it is F9 or F10)
Windows Logon Password Screen is accessible
ON NORMAL/SAFE-MODE START UP:
After Log-In Windows Explorer will not run
Task Manager will run, also allows me to browse the files when trying to start new task
Can run Command prompt
Cannot run any control panel items
Cannot run services.msc
Cannot run mmc
Cannot run sfc
Every time it metions windows drive is locked
Start Error's when running certain applications (Will post codes soon)
Rufus USB Tool does run
Cannot boot Kali Linux off USB
Cannot boot Windows 8.1 off USB
Cannot boot Windows 8.1 off DVDRW
Fixwin2 will not run
Apps either work or don't whether in safe mode or normal
Cannot use Windows Installer
What Fixes I Have Tried So Far
Ok so like any normal user I don't want to lose my files. So here are what I have tried so far:
Repair MBR (Repair Completed, No Luck)
SFC /SCANNOW (Returns Error 'Windows Resource Protection could not start the repair service')
Tried sfc /SCANNOW /OFFBOOTDIR=c:\ /OFFWINDIR=c:\windows (Could not access drive)
Fixwin2 (Will not run in either normal or safe mode)
Booting using Windows 8.1 via USB (Cannot boot from extermal devices due to Bitlocker Encryption)
Booting using Kali Linux Via DVD & USB (Cannot boot from external devices due to Bitlocker Encrytption)
How do I know it is because of Bitlocker, because last time I disabled it, I could run from external devices
Tried to run bitlocker to change settings (Will not run)
Have used both password and recovery keys to unlock driver, they work but when applications are running on windows the drive is still locked?
Tried windows Automatic Diagnostic and Repair (Could not repair anything, did make a log I am still to extract from the syste)
There are No System Restore Points
I'm sure there is much more information I could post however I will leave it on an ask to know basis, apart from the log files and further information to gather. Below is my list of trial and error fixes to try for today (need more ideas and help please!):
Hiren's 15.2 Boot CD via DVD (NOT ABLE TO BOOT)
Hiren's 15.2 Boot CD via USB (NOT ABLE TO BOOT)
Research into the Bios and Possible Update in-case of implementation of Virus, can access flash utility (STILL NOT TESTED)
Try and get a portable version or a working version of windows installer to try and re-install Comodo Internet Security (STILL NOT TESTED)
Another way to disable Bitlocker
Anti-Malware / Anti-Virus Scan If Possible to Run One
Bitlocker Repair Tool, will try this also
I have posted this as have not found much info online, usually find it and crack on but this time things are a little more tricky, my priority task I really need to do is remove the Bitlocker Encryption, but if the application will not run... what do I do
then?
Thanks for your time reading all, Sorry for any poor formatting or spelling.
Update 1: MMC.exe Error Code
Ok so now have the computer in safe mode, still same as before, no explorer.exe, no services etc... Just went into the Task Manager > Services (Tab) > Open Services (Option at bottom)
This is the error I get:
'The Instruction at 0x785a746c referenced memory at 0x000000a8. The memory could not be read.
Any Ideas on what this error is and why?
Update 2: CHKDSK Works with no Fix
Update 3: Hiren's 15.2 Boot CD - USB Boot still no luck booting around Bitlocker Encryption
Just to explain again, I already have unlocked the drive with correct bitlocker password or recovery key yet the drive remains locked not allowing windows refresh of files of complete install from the windows recovery menu as keeps saying drive is locked

Ok so attempt number two to write this update via bloody phone! (Just refreshed page whilst writing!)
Update 4:
Problem - cannot run from bootable devices (DVD/USB)
Cause - bitlocker fully encrypted drive stops this working
Repair - Boot up holding F9 to enter windows recovery Input Bitlocker recovery keys to unlock drives
Navigate to Command Prompt in advanced settings Execute following code:
Repair-bde c: d: -rp 000111-222333-444555-etc...
(Code found from https://technet.microsoft.com/en-us/library/ee523219%28v=ws.10%29.aspx)
Note for those using this: It is common while unlocking certain drives to get errors such as: Quote from http://www.benjaminathawes.com/2013/03/17/resolving-partial-encryption-problems-with-bitlocker/
"LOG INFO: 0x0000002aValid metadata at offset 8832512000 found at scan level
1.LOG INFO: 0x0000002b Successfully created repair context.
LOG ERROR: 0xc0000037 Failed to read sector at offset 9211592704.
(0×00000017) LOG ERROR: 0xc0000037 Failed to read sector at offset 9211593216.
(0×00000017) …followed by around 20 similar entries that differed only by the offset value"
Repair Status for Update 4: COMPLETED - However over wrote D drive data so now need to recover that
Problem 2 - windows services corrupted along with windows files
Cause - Unknown
Repair - wait until system is fully decrypted Once fully decrypted ensure boot from USB/DVD
Re-do fixes that would not work before if this has fixed boot issue Confirm fix / update post Hope anything I put here helps others also

Windows services no longer working after 10.4.9 update

Hi there
I have updated our server from 10.4.8 to 10.4.9 and since the update our windows services won't start. I go in to server admin and press the start button. the windows server begins to start up and then stops. I have downloaded the combo update directly from the apple site and reinstalled this and still no luck. Does anyone know of any way to get Windows up and running or if I need to delete any files to get it going. the only other service currently running is Apple file services. We have print services but I have disabled this to see if it solves the problem.
Thanks in advance
gavin
checking the server log for Windows file service log it says:
[2007/03/21 08:19:55, 2] /SourceCache/samba/samba-100.7/samba/source/lib/tallocmsg.c:registermsg_poolusage(57)
Registered MSGREQ_POOLUSAGE
[2007/03/21 08:19:55, 2] /SourceCache/samba/samba-100.7/samba/source/lib/dmallocmsg.c:registerdmallocmsgs(71)
Registered MSGREQ_DMALLOCMARK and LOG_CHANGED
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/tdb/tdbutil.c:tdb_log(725)
tdb(/etc/samba/lock/share_info.tdb): tdb_lock spinlock failed on list 103 ltype=3
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/tdb/tdbutil.c:tdb_log(725)
tdb(/etc/samba/lock/share_info.tdb): tdb_lock spinlock failed on list 103 ltype=1
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/tdb/tdbutil.c:tdb_log(725)
tdb(/etc/samba/lock/share_info.tdb): tdb_lock spinlock failed on list 0 ltype=3
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/tdb/tdbutil.c:tdb_log(725)
tdb(/etc/samba/lock/share_info.tdb): tdb_lock spinlock failed on list 103 ltype=3
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/tdb/tdbutil.c:tdb_log(725)
tdb(/etc/samba/lock/share_info.tdb): tdb_unlock: count is 0
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/tdb/tdbutil.c:tdb_log(725)
tdb(/etc/samba/lock/printing/printers.tdb): tdb_lock spinlock failed on list 1493 ltype=3
[2007/03/21 08:19:55, 0] /SourceCache/samba/samba-100.7/samba/source/printing/printing.c:printbackendinit(195)
printbackendinit: Failed to open printer printers database

Well there is:
/private/var/servermgrd/servermgrd_smb.loc
an
/private/etc/smb.conf
I would think that he was referring to one of these files.
Generally when windows does not start loading the default smb.conf file resolves the issue in my experence. You can create a new share point to make sure the default gets updated with the current settings.
xserve 2006 Mac OS X (10.4.9)

Windows Service no longer able to print PDF files using Adobe Reader 11.0.07.79

We have a Windows Service that watches a folder for PDF files to be deposited. Once awakened, it executes the Adobe Reader in command line mode to print the PDF files to secure check printers. The Windows Service was working fine with 11.0.06.70 but no longer works with 11.0.07.79.
There are no event viewer errors or errors returned to our Process.Start() call. The Windows Service is running under the identify of an administrator account and has explicit full access to the printer. We have also tried the local computer's Administrator account as well as the default Local Service, but none work.
Using ProcMon to examine the failure, it showed Adobe Reader making many successful registry and file accesses. Adobe Reader then creates a new process, another instance of itself to read in the PDF file and print to the printer. However, ProcMon only shows Adobe Reader accessing AcroRd32.exe, syswow.dll (sp) and ntdll.dll and then the thread and process immediately exits with an exit code of 0 (no file or registry accesses). So, something is causing the instantiated process to fail immediately.
After more research and trying many things, we disabled "Enable Protected Mode at Startup". This enabled things to work again.
We are concerned that disabling this feature might expose security concerns for our customers.
We are suspecting that some security concerns were tightened with 11.0.07.79 that has inadvertently caused printing from Windows Services to falsely be identified as security violations. Can you please investigate and provide a resolution?
Thank you.
Craig Keating
Alliance Enterprises, Inc.
[email protected]

Hi,
Can you please give the following details:
1) Command (given in command line)used to print PDF files?
2) Is the issue reproducible with other printers as well?
3) Is directly printing the PDF from that folder using command line i.e without using windows service works fine or not?
Thanks,
Shakti K

I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

I need to disable Match Services - but my iTunes crashes when I try to load it. How do I get Apple Support to disable it on my behalf?

Hi axostech!
Here is an article that will help you troubleshoot this issue with your iTunes crashes so that you can adjust your iTunes Match settings as you desire:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Windows Service (SMB) does not start automatically

I have a client with an Xserve G5 running 10.4.8 with all software updates applied. Recently, the client decided to buy a new Ricoh multi-function printer, copier, fax machine. We've configured a share point on the server that the Ricoh uses to deposit the incoming faxes and scans. It works fine, but the downside is that it only works over SMB or FTP. I went with SMB (Windows Sharing) because of Apple's flakey implementation of FTP over the years.
The problem is that when the server gets rebooted -- due to power outtage, software update, whatever -- the Windows sharing does not turn itself on like all of the services do. I have to go into Server Admin and turn on Windows sharing manually.
Is there any way to get the Windows Sharing to turn on automatically at boot up like all of the other services do?

I had the exact same problem after applying the 10.4.8 combo update. This thread solved my problem:
http://discussions.apple.com/thread.jspa?messageID=2962778&#2962778
In short, I had to disable the "Workgroup Master Browser" setting in Server Admin > Windows Service > Settings > Advanced. This is enabled by default, by the way.

RFC call from a Windows Service

Hi All,
I have created a simple windows service which is making an RFC call to R/3 system. This is not working. Whereas the same piece of code written in a windows application projects(exe) works properly. Does anyone had similer issues working with Windows services ? Is it a known issue of RFC calls from windows service ???
Thanks & Regards
Ganesh Datta

Hi Juergen,
After I put the debug statements I figured out that connection to R/3 system is unsuccessful.
I am using the SAP .Net Connector 2.0. I wrote a windows service which is manually started. Withing my service I am using Single sign on to connect .This is what was causing the problem. If I disable Single sign on and supply userID and password then connection is successful and also subsequent RFC calls.
I guess within windows service Single sign on does not work.
Thanks for your reply
Best Regards
Ganesh Datta

Oracle 10.2G - windows service started but instance is in nomunt mode

Hello
I have trouble with oracle 10.2G in windows 2003...
I run following command:
oradim.exe -startup -sid sid_name -usrpwd pass -starttype srvc,inst
After above command, windows service has status "started", but instance is in nomunt mode.
In alert.log I don't see any error...
Thanks for any help.
Regards

in oradim.log I found following error:
Tue Dec 18 05:00:02 2007
ORA-01017: incorrect username/password; logon refuse
but I don't change any password...
This is my alertlog:
Tue Dec 18 05:00:01 2007
ORACLE V10.2.0.2.0 - Production vsnsta=0
vsnsql=14 vsnxtr=3
Windows Server 2003 Version V5.2 Service Pack 1
CPU : 4 - type 586, 2 Physical Cores
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:1468M/2047M, Ph+PgF:3527M/3947M, VA:1940M/2047M
Tue Dec 18 05:00:01 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_1 parameter default value as D:\oracle\ora102\RDBMS
Autotune of undo retention is turned on.
IMODE=BR
ILAT =18
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 150
timed_statistics = TRUE
resource_limit = TRUE
shared_pool_size = 209715200
shared_pool_reserved_size= 20971520
trace_enabled = FALSE
nls_language = POLISH
nls_territory = POLAND
nls_sort = POLISH
sga_target = 838860800
control_files = D:\ORACLE\ORA92\DATABASE\CONTROL01.CTL, D:\ORACLE\ORADATA\TETA\CONTROL02.CTL
db_block_size = 8192
compatible = 10.2.0
db_files = 100
db_file_multiblock_read_count= 8
fast_start_mttr_target = 0
undo_management = AUTO
undo_tablespace = ROLLBACK_DATA
O7_DICTIONARY_ACCESSIBILITY= TRUE
remote_login_passwordfile= EXCLUSIVE
db_domain =
instance_name = TETA
session_cached_cursors = 100
job_queue_processes = 5
parallel_min_servers = 0
parallel_max_servers = 0
background_dump_dest = D:\ORACLE\ADMIN\TETA\BDUMP
user_dump_dest = D:\ORACLE\ADMIN\TETA\UDUMP
core_dump_dest = D:\ORACLE\ADMIN\TETA\CDUMP
db_name = TETA
open_cursors = 2048
star_transformation_enabled= FALSE
pga_aggregate_target = 157286400
workarea_size_policy = AUTO
aq_tm_processes = 1
PMON started with pid=2, OS id=291912
PSP0 started with pid=3, OS id=142740
MMAN started with pid=4, OS id=656244
DBW0 started with pid=5, OS id=652136
LGWR started with pid=6, OS id=755832
CKPT started with pid=7, OS id=226276
SMON started with pid=8, OS id=661212
RECO started with pid=9, OS id=467040
CJQ0 started with pid=10, OS id=157796
MMON started with pid=11, OS id=249832
MMNL started with pid=12, OS id=795116
Tue Dec 18 05:00:02 2007
Oracle Data Guard is not available in this edition of Oracle.
Regards

Unable to create a Service to the windows Services

Hi All,
Im trying to create a Windows service as below:
D:\VM's\TWiki-VM>sc create TWikiVM binPath="C:\Program Files\VMware\VMware Workstation\vmrun.exe" -T ws start D:\vm's\TWiki-VM\Twiki-6.0.vmx
But i dont get the service created. I get the below message again & again as below:
Creates a service entry in the registry and Service Database.
SYNTAX:
sc create [service name] [binPath= ] <option1> <option2>...
CREATE OPTIONS:
NOTE: The option name includes the equal sign.
type= <own|share|interact|kernel|filesys|rec>
       (default = own)
start= <boot|system|auto|demand|disabled>
       (default = demand)
error= <normal|severe|critical|ignore>
       (default = normal)
binPath= <BinaryPathName>
group= <LoadOrderGroup>
tag= <yes|no>
depend= <Dependencies(separated by / (forward slash))>
obj= <AccountName|ObjectName>
       (default = LocalSystem)
DisplayName= <display name>
password= <password>
I have also tried mentioning all the options, but still the same. Please find the snapshot below:
Kindly advice.
Regards, Alan.

Hi Alan,
I'm guessing that -T is a parameter to the vmrun.exe executable, right?
So if you type in the following instead, it should work to create the service.
#With SC
sc create TWikiVM binPath= "C:\Program Files\VMware\VMware Workstation\vmrun.exe -T ws start D:\vm's\TWiki-VM\Twiki-6.0.vmx"
#With PowerShell
New-Service -BinaryPathName "C:\Program Files\VMware\VMware Workstation\vmrun.exe -T ws start D:\vm's\TWiki-VM\Twiki-6.0.vmx" -Name TWikiVM
Notice the space between binPath= "" and the executable
However, note that depending on vmrun.exe's behaviour it might not work anyway when you try to start the service.
Hope this helps you!
MCT | MCSE: Private Cloud/Server, Desktop Infrastructure

Oracle service orcl not found in windows services

hello
i'm facing a very serious problem. MY server ORacleserviceorcl not found in services. all services currently up and running. but ORCL service not show there and my database is down how i start my database. i found this problem first time. plz help me how to Start oracle. my ORacle version 10g on windows server 2003

Niall,
Do you think that the OP should try the following command to re-create the service:
C:\> ORADIM -NEW -SID ORCLAs far as I have been able to determine, that command will not cause an issue, and will return an error if the service already exists.
To the OP: It is possible that a utility, such as HiJackThis, was used to remove the service, the Windows registry is corrupt, someone used ORADIM to delete the service, someone was hacking away in the registry and accidentally removed the entry for the service, or any number of other possibilities (I am not sure if MSCONFIG will remove a service when that program disables the service, but that might be another possibility, and dropping the database is another possibility).
Charles Hooper
Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
http://hoopercharles.wordpress.com/
IT Manager/Oracle DBA
K&M Machine-Fabricating, Inc.
Edited by: Charles Hooper on Jan 22, 2010 10:42 AM
Added the note about dropping the database as a possible cause - see if the datafiles still exist.

Disable Windows services in UCCE

Similar Messages

Maybe you are looking for