Disable Wizard (limited functionality) under Analysis Editor Preference Tab In OBIEE

Hai Experts
I want to disable this option(Disable Wizard (limited functionality) under Analysis Editor Preference Tab) for all users globally.
This option should not appear in Preference tab of OBIEE
Regards
Saurabh Anand

Hi,
It is a standard application privilege you can find and set under "Administration" -> "Manage Privileges":

Similar Messages

I would like to disable the reset functions (settings/general/reset)

How do I disable the reset function under settings-general-reset so users cannot erase ipads?

To the best of my knowledge, there is no way to disable this function.
Regards.

HT5176 I have a disability that limits my keyboarding abilities and speed. A blue tooth add-on keyboard will provide some help. However, I expect to rely on the dictation function. Will "dictation" work in conjunction with a wireless keyboard?

I have a disability that limits my keyboarding abilities and speed. A blue tooth add-on keyboard will provide some help. However, I expect to rely on the dictation function on the ipad 3. Inasmuch as the blue tooth keyboards have no "dictation key, will "dictation" work in conjunction with a wireless keyboard?

I also have admiration for Steve Jobs. I've been a Mac user since 1984.
Given that a wireless keyboard will not have the dictation key, there ought to be some way to work around this issue. All that is needed is some way to toggle between keyboard input and microphone input. Perhaps using AppleScript and/or a hot key, I can set up a voice command or define a hotkey to toggle between the 2 inputs.
What do you think?

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

Hi, I am using my icloud on my iphone but am unable to find it on my mac book pro. It's not under my system preferences like it shows under the setup. Can I download it again? Or something. I just need to backup some files on my computer and am unable.

The minimum requirement for iCloud is Lion 10.7.5 (Mavericks preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is now non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mavericks, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Lion is available in the Online Apple Store ($19.99). Mountain Lion (10.8.x) is also available there at the same price but there seems little point as the system requirements are the same for Mavericks (10.9.x) - which is free - unless you need to run specific software which will run on Mountain Lion only.
The requirements for Mountain Lion and Mavericks are:
OS X v10.6.8 or later
2GB of memory
8GB of available space
and the supported models are:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
It is available from the Mac App Store (in Applications).
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

My USB drives have "Disk Repair" issues, with "limited functionality."

The only way I can transfer files between my PowerMac G4 with OS X v10.5.2 and my PowerMac 5500/225 with OS 8.6 is with Iomega Zip drives. My 100 MB disks work perfectly in OS 8.6 but they seem to get corrupted when I open them on the G4. I've had this problem with other USB drives on the G4, including an external USB hard drive and my USB SD card reader. Things will seem to work fine transferring files but then I'll get the following message:
*+Disk Repair+*
+The disk "disk" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.+
Then I drag the files over with the Zip drive until everything blows up and I have to reformat the disk. I'm scared what might happen with the SD cards, if that will have any effect on the camera or if the disk will stop working entirely. The external hard drive was the first to blow up but we didn't know that this was going to be a trend so we had returned that to Best Buy. It had worked beautifully under OS X v.10.3.
Does anyone have any ideas on what is going on here and how to fix it? I do not have vast sums to upgrade hardware and software nor do I even really want to. I'm quite fond of the old Power Mac 5500 and OS 8.6.
Any suggestions are greatly appreciated!

Have you tried backing up again by manually running a Time Machine backup? Unfortunately, if your backup is corrupted I don't know of a way to fix it except to start over.

Word Wrap functionality in HTML Editor

Hi,
Is their any configuration to enable the word wrap functionality in HTML Editor.
Best Regards,
Ajay

Hi Priyaranjan,
you need to use modules for that. The below link explains step by step a sample for word wrapping in an analysis item.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0f7d724-c0f0-2d10-828f-be249d59b5c3?QuickLink=index&…
Regards
Yasemin...

Chart - problem with realize one of the function under CR XI

Post Author: mrowa
CA Forum: Charts and Graphs
Hello,
I have
problem with realize one of the function under CR XI. I would be persuade if
any of us would like to help me.
1)
1) From
database (basically from one table), I take data to make report. Each of record
have appropriate fields:
dteData
intYear
intMonth
intDate
2)
2) I
want to realized comparison data from two or more periods of time on one chart
and in one table. For easily explanation I will describe problem on two
periods.For instance, user want to display and compare
on chart date (type monthly -sum data of each month) from 2007.02 u2013 2007.05
with date from 2006.03 u2013 2006.06. So we compare month 2007.02 with 2006.03;
2007.03 with 2006.04; 2007.04 with 2006.05; 2007.05 with 2006.06
On char I would like to display bars with comparison
of months.
Problem is that I donu2019t know how to write
something similar. I can use one period without any problems, but two and mores
I canu2019t realized.
Detail description:
I passed
two parameters two report:
{?from}, {?to} u2013for first period
{?offset}, it means {?from}+{?offset},
{?to}+{?offset} - for second period
On axis Y I have Sum(intDate);On
X (year + month). But on each value x( example 20007.02) I need to have
two values (bars). Value for standard period and offset.
For example for x=2007.02, I need
two bars one equal 2007.02 and second with offset u2013 2006.03
Movement to next value (bar) is
persuade by fields {data.rok}&{data.month} first or second period. This is
combination of two elements year&month defined under Formula. Problem
persist in that both period has different year.month and here problem starts once
again. I donu2019t know how to solve it. I have found out one solution but it
limits user only for two periods (I want to compare more).
My idea for compare only two
periods:
I make one query in CR for one
period and second query for second period.
Firs query:
"SELECT
       year ,
      month
Second query
"SELECT
       year + FLOOR({month + offset} % 13),
      {month + offset} % 13
Then in CR I connect two periods and
make u201Ctableu201D (results of queries) with JOIN on fields year and month.
This solution is not functional,
because I need to make reports for days and hours as well. In this solution I
canu2019t use (%31), because not all months has 31 days.
I use CR in WEB app made in Visual
Studio 2005. Maybe from aspx we can manipulate with date to get exact solution,
and solve problem with SELECT.
Hope my description clearly
describe problem and someone will be able to help me. I would be thankful.

I have had similar problem before.
Because I had too many data, the legend would not display all the data. Also the chart would not display all the data. But I was able to find a work around.
In your case, Right click on the Legend text and click on Format Legend Entry.
Change the font of the legend to 4 (which is the minimum). This may work.
If you are also having problem with data labels, you could change the font size of the data labels.
Hope this helps.
Thank you.

What is the purpose of User-Defined Functions under Excel Service Application?

Hello, I have done a lot of research and have concluded that we cannot use VBA present under Excel sheet code in sharepoint.
Today I was reading on excel services in sharepoint. I came across User-defined functions under Excel Service Application settings. I believe that User defined functions refer to the Calculations and VBA (am I wrong on this?).
If true, then, does this bring hope that we can use embedded VBA code present into excel sheet in SharePoint also?

Hi Nachiket,
When you set ‘Allow External Data’ to None, it disables all external data connections for the trusted file location.
When you set ‘Allow External Data’ to ‘Trusted data connection libraries and embedded’, it enables connections that are embedded in the workbook file or connections that are stored in a trusted data connection library.
More information, please refer to the link:
http://technet.microsoft.com/en-us/library/jj219699.aspx
As your description, when you tried to set Allow External Data to None, the external data also was displayed, it may be caused by data cache or time delay.
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Hide/Disable My Account - BI Publisher Preferences Tab

Hi,
Anyone know if its possible to hide/disable the 'BI Publisher Preferences' tab under 'My Acount' in OBIEE 11.1.1.6.0 portal?
Rgds

Hi ,
U gone through this ?
how to disable BI Publisher options in OBIEE11g

Function Point Analysis Report

Hi!
We use Function Point Analysis Report in Oracle Designer 6.0 (it exist even in Designer 1.3.2) and now we´re migrating to Oracle Designer 9i.
I was trying to use "Function Point Analysis Report" in Oracle Designer 9i but it doesn´t exist anymore.
Does anybody knows how to get function point analysis report now?
Or does anybody have any suggestion on how to get this report?

These reports were removed in the move from 6.0 to 6i. You can create your own repository reports if you need them. There is a document on OTN describing how you can do this on the Repository Site, under a section called Sample code: http://otn.oracle.com/sample_code/products/scm/index.html
Regards
Sue Harper

Frequency response function modal analysis

After reviewing the signal analysis functions in DIAdem I have realized them to be a bit limited for modal analysis. I have a couple hammer impact tests that I need to process a frequency response function for, and since this is brand new to me I'm not seeing anything in the embedded function list that is going to help me. I was wondering if anyone out there has a couple of pointers on generating a FRF plot for modal hammer impact tests. I did notice that the ChnFFT2 command allows me to generate a transfer function, coherance, and FFT Cross Spectrum channels for analysis. Though I might be confused and this may be everything I need. My FFT2 settings are below.
[code]
FFTIndexChn      = 0
FFTIntervUser    = "NumberStartOverl"
FFTIntervPara(1) = 1
FFTIntervPara(2) = 2500
FFTIntervPara(3) = 1
FFTIntervOverl   = 0
FFTNoV           = 0
FFTWndFct        = "Rectangle"
FFTWndPara       = 10
FFTWndChn        = "[1]/Time axis"
FFTWndCorrectTyp = "No"
FFTAverageType   = "No"
FFTAmplFirst     = "Amplitude"
FFTAmpl          = 1
FFTAmplType      = "PSD"
FFTCrossSpectr   = 1
FFTCoherence     = 1
FFTTransFctType = "Spectrum H0"
FFTCrossPhase    = 0
FFTTransPhase    = 0
Call ChnFFT2("[1]/Time axis","'[1]/H_1' - '[1]/H_4'","'[1]/A_1' - '[1]/A_4'") '... XW,ChnNoStr1,ChnNoStr2
[/code]

Standard modal analysis has something denoted as FRF. I have a labview application note "The Fundamentals of FFT-Based Signal Analysis..."
Frequency Response Function
The frequency response function (FRF) gives the gain and phase versus frequency of a network and is typically computed as
where A is the stimulus signal and B is the response signal.
The frequency response function is in two-sided complex form. To convert to the frequency response gain (magnitude) and the frequency response phase, use the Rectangular-To-Polar conversion function. To convert to single-sided form, simply discard the second half of the array.
You may want to take several frequency response function readings and then average them. To do so, average the cross power spectrum, SAB(f), by summing it in the complex form then dividing by the number of averages, before converting it to magnitude and phase, and so forth. The power spectrum, SAA(f), is already in real form and is averaged normally.
Refer to the Frequency Response and Network Analysis topic in the LabVIEW Help (linked below) for the most updated information about the frequency response function.
http://zone.ni.com/devzone/cda/tut/p/id/4278
So the options for FFT2 are
No
DIAdem does not calculate a transfer frequency response.
Spectrum H0
DIAdem calculates the transfer frequency response by dividing the FFT of the output signal (A) by the input signal (E): FFT(A)/FFT(E). DIAdem averages the amplitudes of the individual transfer functions.
Spectrum H1
DIAdem specifies the cross spectrum and the auto spectrum for each signal pair. DIAdem calculates the transfer frequency response by dividing the averaged spectra: Middle(cross(A,E))/middle(auto(E)). DIAdem does not average phases, because phases can delete each other.
Spectrum H2
DIAdem specifies the cross spectrum and the auto spectrum for each signal pair. DIAdem calculates the transfer frequency response by dividing the averaged spectra: Middle(auto(A))/middle(cross(E,A))
If you assign the values Spectrum H1 or Spectrum H2 to the variable FFTTransFctType, DIAdem averages and divides the cross spectra and the auto spectra and calculates the amplitudes last.
Which state auto spectrum when FRF is power spectrum.

I have limited functionality using sharepoint with firefox

There are certain views in sharepoint that are only accessible when using activex controls. Firefox is my only browser, which means I have limited functionality attempting to make new pages or visit pages in certain views.
== This happened ==
Every time Firefox opened
== I switched from IE to Firefox

Sharepoint is not a proper cross-platform system. I understand that Sharepoint 2010 is better at talking to Firefox and other non-IE browsers than Sharepoint 2007 and earlier, but it still has problems. Ironically, even some IE users have trouble due to the ActiveX requirements.
I'm confident that workarounds could be implemented with Greasemonkey and other tools to address this on the browser side, but there don't seem to be any that work in a completely compatible way. There are certainly dozens of HTML editors which work nicely in Firefox which could get linked in either through a client-side add-on or by modifying behavior on the server.
At least two HTML editors are built into plugins which allow you to right-click on a textarea and edit the contents in a more WYSIWYG manner. I tried the Write Area and Xinha addons, and they both pop up a new HTML window for editing with just a right-click. Unfortunately, Sharepoint has a lot of mucky CSS which causes the pristine HTML coming out of those editors to be rendered in an ugly way. We need a rich text editor that can inherit all of the CSS that Sharepoint serves up yet still work in a nice way.
There are some sites which describe how to serve up FCKeditor, TinyMCE, and other rich text editors from the server side. Here are a few for TinyMCE:
http://www.andypemberton.com/captech/integrating-tinymce-with-sharepoint-moss-2007/
http://www.notesfor.net/post/Enhance-SharePoint-rich-text-field.aspx
Of course, the text editor is just one of many things that are screwy about Sharepoint. Someone ought to put together a whole project to gather together the various bits needed to make Sharepoint better for cross-platform users.
There is at least one company which provides commercial Sharepoint server-side add-ons to make a variety of user interface improvements for both IE and non-IE browsers:
http://www.telerik.com/products/sharepoint.aspx
I'd rather see companies use something other than Sharepoint for internal wiki-ish sites. Despite the marketing, many Sharepoint sites do little more than share Word and Excel documents. There are many good alternative systems which are much better at promoting collaboration.

I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.

Question: I am new to LR and have it set up on a Mac desktop and laptop. On the laptop, the Basic function under Develop simply disappeared. I am lost. Help.

It's a common issue. The Basic panel is merely hidden.
Hiding/unhiding panels is actually a feature of Lightroom but it is unintuitive - few people know it exists - so most newcomers are thrown when a panel somehow gets hidden.
Right-click anywhere in the right hand side panel area and a context menu will appear.
Click the Basic option to make the Basic panel re-appear.

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

How to Disable battery charging Function?

Hi;
I have a question about charging funtion of my "HP Compaq Business Notebook, 6720s":
How can I disable "battery charging" function in windows 7? Is there any "advanced setting change" or "software" that while battery is in its slot, stop my notebook from charging its battery?
Thanks

After some days trying many methods, yet I haven't find a solution to my problem. Then I ask is there any one
knows which software should I download for HP Compaq Power Management (similar to the software that Huffer
mentioned, but that was for Lenovo) or which registery or BIOS change should I do , so that I can manually disable
charging function of laptop, or at least put a starting level that up to that level, laptop won't start
autolatically to charge battery, because in this manner once that my Battery reaches to below 100%, instantly begin
to be charged & it would decrease its life time. Please consider that because of my power cable is to some damaged, sometimes it suddenly disrubt & cause my laptop abruptly shut down, then necessarily the battery would always be connected tob prevent this suddent effect.
If any one could help me, I would appreciate him a lot.
Regards

Disable Wizard (limited functionality) under Analysis Editor Preference Tab In OBIEE

Similar Messages

Maybe you are looking for