Disable Zoom on Pavillion 21 Touchsmart screen

Dear Sir,
I would like to disable 'Zoom' on my PC all in one touchscreen since I want to use it as a Kiosk and all set to full screen already.
I can not find any of these on this PC such as 'disable pinch screen' etc. on this PC
Please help
Thank you very much

You are very welcome. Thank you for the additional information.
The reason that you don't have the ClickPad tab is, you don't have a laptop. When I saw touch screen I thought Laptop. Sorry!
Here is the User Guide for the computer:
http://h10032.www1.hp.com/ctg/Manual/c04329428
Go to P.11 and read how to Customize the touch gestures. I believe this is where the answer is located.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

HP PAVILLION TOUCHSMART 14-B132tx SLEEKBOOK

HELP! MY TOUCH SCREEN IS DISABLED AFTER I UPDATED FROM WINDOWS 8 TO WINDOWS 8.1 I HAVE A HP PAVILLION TOUCHSMART 14-b132tx SLEEKBOOK. HOW TO FIX THIS. I CANT SEEM TO FIND A SOLUTION. I'VE TRIED THIS http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-122590-1&cc=us&dlc=en&lc=en... BUT IT DOES NOT WORK. PLEASE! ASAP.

Hello @xtalahh ,
Welcome to the HP Forums!
I understand your touch screen has stopped working since updating to Windows 8.1.
Make sure your operating system is up to date:
Press Windows Key + C.
Click Settings.
Click Change PC settings.
Click Update and recovery.
Click the Check now button.
If updates are available click View details.
Check the updates to install and click Install.
After doing this check Device Manager for the touch screen:
Press Windows Key + X.
Click Device Manager.
Click View.
Click Show hidden devices.
Expand Human Interface Devices.
Look for the HID-compliant touch screen.
If it's not there click Action and select Scan for hardware changes.
If it is there right click on it and select Update driver software...
Click Search automatically for updated driver software. This will automatically search for and install updated drivers, or tell you they are already up to date.
Re-add the touch screen:
Press Windows Key + C.
Click Search.
Type Tablet PC Settings.
Click Tablet PC Settings in the list of results.
Click Setup...
A white screen will appear. Touch the screen to recognize it. Pressing Enter will let you change screens if you have more than one display set up. If it does not recognize your touch press ESC to close the screen.
If your touch is recognized it will confirm the hardware is functional.
Let me know if any of this helps.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Accessility zoom and dual monitor (disable zoom on one of the monitor)

Hello,
I am vision impaired user of the Mac. I'm having a problem. When I presenting something with PowerPoint or Keynote and using a projector.
The zoom is enabled on the two monitor, so when I run the diaporama the Presentation Screen is not displayed, it display what I am sseing with the zoom on the computer zoom.
So I would like to disable this behavior. I would like to see the presentation with the zoom on my computer screen and the Presentation mode on the projector.
Do you know how to make this possible?
Thank you,
Best regards,
Lionel

I have figured it out today while looking for some other settings in Openbox. I have added to openbox's rc.xlm the following
<application name="skype">
<position force="yes">
<x>100</x>
<y>100</y>
</position>
</application>
<application name="oblogout">
<position force="yes">
<x>0</x>
<y>0</y>
</position>
<skip_pager>yes</skip_pager>
<skip_taskbar>yes</skip_taskbar>
<fullscreen>yes</fullscreen>
</application>
and now both application start in the main monitor.
Last edited by VDP76 (2013-08-17 18:33:24)

Unable to disable Zoom

Hello,
I've been trying to disable Zoom under Settings - General - Accessibility by moving the toggle to the left, but the toggle keeps automatically going back to the right as soon as I touch it to move it to the left.
I have a 3rd gen ipad wifi with iOS 8.0 installed. does anyone else have the same problem?

Thanks Zyriab,
but in Snow Leopard settings, all I have is "Screen Zoom" and "Pinch Open & Close", both of which are unchecked.
I have no "Scroll & Zoom" and no "smart zoom" options...
Peter

Disable zoom while in guided access mode

Anyone know of a way to disable zoom (Settings -> General -> Accessibility -> Zoom) while in guided access mode? Yes, it can be done manually prior to entering guided access mode but I'm looking for something more automatic. My child has the uncanny ability of getting into zoom repeatedly while playing.
Thanks

I don't exactly understand your issue but if your stuck in guided access press and hold the power and home until you see your device turns off keep holding then when you see the apple startup logo let go (this is called a hard reset or a respring) this will force you out of guided access and into the home screen where you can unlock the device with out being stuck in guided access
If this does not help you please ignore this comment

My ipod touch 3rd gen is zoomed in on all screens....how do i unzoom it?

I was having trouble getting my ipod to charge and now it is zoomed in on all screens!! how do i UNzoom it? it just zoomed in all by it self when i went to try to charge it!!

This is asked and answered often. the forum search bar is on the right side of this page.
It is also covered in the manual - zoom feature.
Double tap with three fingers.

In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.

Hi all
In the component overview screen of CO01 I want to disable all the field in screen of table control.I want to make it as output screen only.
Thanks & Regards,
Rajib.

Isn't that just exactly what transaction CO02 does? CO01 is for creating production orders so what sense does it make to have it display mode only?
Maybe your goal is to stop then end user changing the component assignment that is automatically detected by the system. If so, personally I think a better starting point would be PP configuration or user authorizations rather than looking to change the screen by whatever method. As we don't know what you are trying to achieve it's hard to offer much more advice maybe all you need is to change transaction to CO02

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

Is there an update to iOS 6? I've been having several technical issues since the upgrade. Uncontrolled zoom of the entire screen, Siri taking 25 seconds to respond and not recognizing names, locking up of the phone. All requiring a reset.

I would restore with backup and if that doesn't fix it try as new
http://support.apple.com/kb/HT4137

How to disable save button on selection screen (1000) run from other report

Hi Experts,
Can any one let me know how to disable save button on selection screen (1000) run from other report.
Say I am running from report R1 which submits report R2, but the save button should be disabled on
report R2(selection screen 100).
Thanks in advance.
Regards
RP.

Hi RPReddy16 ,
Try this:
DATA :BEGIN OF t_extab occurs 0,
fcode like rsmpe-func,
END OF t_extab.
REFRESH T_EXTAB.
MOVE 'SAVE' TO T_EXTAB-FCODE.
APPEND T_EXTAB.
CLEAR T_EXTAB.
SET PF-STATUS 'STATUS' EXCLUDING T_EXTAB.
Regards,
José

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen. I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it). The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

My daughter has disabled her iphone from lock screen. how do i fix it?

my daughter has disabled her iPhone from lock screen. how do I fix this?

Forgot passcode for your iPhone, iPad, or iPod touch, or your device is disabled - Apple Support

How to set a value to a disabled field in an B1 screen ?

Hi,
Can anyone tell me how to set a value to a disabled field in an existing screen.
For example , I want to set a value to the Paid/Credited field in the Sales - A/R Invoice screen, which is a disabled field.
I tried setting the field as enabled but it throws an error.
Thanks in advance
Mina

It depends on the business process required for generating the invoice. (What is this process just now?)
I can think on quite a few ideas, but can't be sure if any of them will match your specific requirements. I'll list a few here and see if any of them might work, or at least generate some new ideas for you. (Unfortunately you can't change an existing payment object to add an invoice to it at a later date, nor is the reconciliation process exposed through the SDK. This limits your options a bit.)
1) Is there a need for a separate delivery and invoice? Would skipping the delivery process and using the standard Invoice + Payment screen work for you? Stock would be issued, invoice created and payment matched directly to invoice without any work.
2) This might apply if the invoice is simply a one for one match with the delivery. Rather than just generate a payment in the delivery screen, generate the invoice and a payment at the same time. The standard invoice screen will then show it as paid. You can control the dates on the invoice raised through DI code.
3) Where do you write the Paid Amount to? How is it not available in the invoice screen? Put it somewhere accessible and write it to the user field.
John.

Stuck in MegaZoom-Do NOT want to disable Zoom

I'm having the problem of being stuck in mega-magnification and being unable to get the iPad to respond at all. I've read the posts on this issue, including the official Apple answer. All seem to tell us to disable zoom. I LIKE the zoom feature. I double-tap in & out quite frequently--finding it much easier than the pinch. What I don't like is being stuck in zoom.
So, is there another answer besides totally disabling the zoom feature?

No promises but a system Reset cures many ills and takes but a minute to perform:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A Reset does NOT delete apps, photos, movies, music or any other data. A Reset does NOT delete any settings for email, network access, etc.
Also, you might wish to download the 4.2 User Guide. Pay special attention to page 170.
http://support.apple.com/manuals/#ipad

Suppress or Disable SAVE button in Approval screen (BBPSC07)

Dear Experts,
i would like to ask how to suppress or disable SAVE button in Approval Screen (BBPSC07). Thanks in advance..
Edited by: Mochamad Affan Rasyidi on Oct 3, 2009 6:38 AM

Hi
If you mean disabling the Variant Save Option of the SAVE button in a Selection-Screen without getting rid of the button in the screen you can do this.
FIELD-SYMBOLS <fs>.
AT SELECTION-SCREEN.
IF sy-ucomm EQ 'SPOS'.
ASSIGN ('(RSDBRUNT)<SSCRFIELDS>-UCOMM') TO <fs>.
<fs> = ''.
* Logic you want to apply to the SAVE button
ENDIF.

How do I disable zoom?

I have set both zoom.maxPercent and zoom.minPercent to 100 (tried other values too), but I can still pinch to zoom. Have restarted FF several times, including choosing Quit from the menu, dragging it out from the running apps view, and even Force closing. Nothing helps. The settings are saved, but I can still pinch and stretch to zoom.

I don't have that kind of control over the DOM or markup. What I do have is absolute control over the browser, so disabling zoom there is the only solution.
Is there a reason zoom.minPercent and zoom.maxPercent don't work on Firefox for Android?

Disable Zoom on Pavillion 21 Touchsmart screen

Similar Messages

Maybe you are looking for