Disabled combo boxes don't display properly after loading a movie.

Hi,
I have a main movie that contains some combo boxes. Some of them may be disabled.
By pressing a button I load another movie using loadMovie. The loaded movie also contains combo boxes.
When the button is pressed, the clip that shows the combo boxes is removed from the stage and the loaded movie is displayed. By pressing another button, the loaded movie is unloaded and the clip with the combo boxes is displayed again.
Well, once the other movie has been loaded, when I go back to the clip with combo boxes, the disabled combo boxes have a small gray button covering the black down arrow.
I have determined that so long as the loaded movie contains combo box in the library, the problem occurrs, even if there is no actual instance of it.
The combo boxes that are not disabled are not affected. The combo boxes are disabled by setting "cb_name.enabled=false".
If the combo box is enabled, it displays correctly, but if disabled again, it goes wrong again.
My project is targeting Flash 8, so it uses AS2.
I'm using Flash CS4.
This is a very simple example I did to make sure I wasn't doing anything funny:
Initially:
After pressing the button:
After pressing the other button:
The behaviour in a web browser is the same...
I hope someone can help me with this. Thanks in advance!

Thanks for the response.
The "Load the movie" button:
on(click)
    _parent.gotoAndStop(2);
The 2nd frame:
loadMovie("Test another child.swf",Container);
stop();
The "Unload and go back" button:
on(click)
    unloadMovie(_parent.Container);
    _parent.gotoAndStop(1);
Container is a movieClip with a dark gray square shape the size of the movie clip that is loaded. It doesn't exist on frame 1, only on frame 2.
The combo boxes are inside a movie clip, and this is only on the stage on frame 1.
This and the captures belong to a very simple test I did. If there is a way of posting files, I can post a zip file with the two .fla and the two .swf.

Similar Messages

  • 3.1 Bug? - Images don't display properly after upgrade to 3.1 from 3.0

    When pages are displayed after the upgrade, the image appears the first time the page is opened. Once a user goes to another page, then come back to the page with the image, the image is no longer displayed.
    This happens when the browser is set to "Check for newer versions of stored pages". When it checks for the new version, the image is not displayed.
    This looks like a Bug? Is someone working on a fix for this?
    Thanks.
    - Scott

    Scott,
    Thanks for this information. It is very helpful. May I put you through one last contortion, please?
    I would like to see what information is being passed in the HTTP header in the request for one of these broken images. If you have Live HTTP Headers or Firebug for Firefox, or Fiddler for IE, this should hopefully be easy. You don't seem technically challenged in the least, but just for the record, here's what I did using Firefox:
    1) Ran the Timesheets application
    2) For the very first icon on the left "My Timesheets", I right-clicked my mouse and chose "Copy Image Location"
    3) I opened up a new tab in Firefox and pasted the URL and then hit enter to retrieve the image
    4) I turned on Live HTTP headers and then clicked Refresh in my browser.
    I am most interested in the If-Modified-Since HTTP header. The full request on my system was:
    GET /pls/apx11c/wwv_flow_file_mgr.get_file?p_security_group_id=191046216955701077&p_fname=eba_timesheets.png HTTP/1.1
    Host: apexdev.us.oracle.com:7778
    User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12
    Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
    Accept-Language: en-us,nl,it;q=0.9,en-gb;q=0.9,ja;q=0.8,de;q=0.8,zh-CN;q=0.7,zh-tw;q=0.7,en;q=0.6,af;q=0.6,fr;q=0.5,pt-br;q=0.5,ko;q=0.4,ca;q=0.4,de-ch;q=0.3,zh;q=0.3,bn;q=0.2,ja-JP;q=0.2,fr-ca;q=0.1,ru;q=0.1,ru-RU;q=0.0
    Accept-Encoding: gzip,deflate
    Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
    Keep-Alive: 300
    Connection: keep-alive
    If-Modified-Since: Wed, 20 Feb 2008 22:54:09 GMT
    If-None-Match: "1951996202472197182454517155409"
    Cache-Control: max-age=0Thanks in advance.
    Joel
    P.S. I nuked the Cookie line of the request, as it contained my e-mail address and I want to avoid the Web harvesters of e-mail addresses.

  • Disable Combo Box Wrapping?

    Is it possible to disable combo box wrapping?  I would like to right-justify text in a combo box and display the right-most characters if the text is larger than the size of the combo box.  Currently, if the text is larger than the box, it appears left-justified due to wrapping.
    Thanks
    CLA, CTA

    Hi LVB,
    I see what you are running into, but unfortunately word wrapping cannot be disabled in a combo box. You'll have to find some other way to set up your UI.  Of course, you can always submit a product suggestion for this option.
    Brian A.
    National Instruments
    Applications Engineer

  • Why some fonts don't display properly

    I use Windows 7, Pagemake 7 (with update 7.01)
    Some fonts don't display properly in pagemaker file. Sometimes they look blank; sometimes display in part and the rest as blank. In fit-in Window view, sometimes a page displays properly, and next page is blank, go back to the previous page, it also turns blank. Some times letters look garbled. Display varies as and when the view size is changed.Example for the fonts - Souvenir LtBt . What could be the problem and what is the solution ?

    Pagemaker is old software, it was designed for use when fonts were quite limited. It will only display the first 256 characters in a font.  Modern fonts have moved way beyond this limitation. The solution is to stick with older fonts, or to upgrade to indesign. It does sound like your souvenir font  could be corrupted, running font management software is a good practice no matter what program you use.
    Jay

  • The internet pages don't display properly I'm using osx10.3.3, yahoo for example asks me to update, but I cant find out how to as the apple store just keeps sending back to the same page with no down load option...do i need to up date or is it just my mac

    The internet pages don't display properly I'm using osx10.3.3, yahoo for example asks me to update, but I cant find out how, as the apple store just keeps sending back to the same page with no down load option...do i need to up date or is it just my mac

    What Mac model do you have? You might be able to upgrade the OS to Tiger 10.4 or Leopard 10.5.
    Even browsers for Tiger 10.4 will get the update message.
    You could try a newer browser than Safari, which is obsolete, by downloading Firefox v2.0.0.20 at http://www.oldapps.com/mac/firefox.php
     Cheers, Tom

  • Combo Box in Portal Form resets after query

    Hello all,
    I have a portal form based on Stored Procedure. In it I have a Location combo box and Query button in addition to few text items. Users can select location from the drop down list and hit Query button to view the values in for the text items. The query part is working fine. But after query the Location resets to Null (as the LOV which feeds the combo box can have Null). We would like to keep the location they chose to query up even after the query results. Any help is appreciated.
    The Location item is in the parameters of the Stored Procedure. Initially it was IN, later I changed to IN OUT but there is no change in functionality.
    I also removed the ability to accept NULL for the LOV which feeds Location Combo box but now it is displaying the first location on the list after the query, which is even worse.
    Thanks in advance,
    Manohar

    You're catching Exceptions in empty catch() blocks. There might have been an exception, but you won't know if the catch block doesn't do anything.
    Try something like this:
    catch(SQLException e){
        System.err.println( "Problem with db query"+e.getMessage() );
        e.printStackTrace( System.err );
    }in order to see what's going wrong with your code.

  • Album frames don't display properly: Since .MAC converted to MobileME help?

    ORIGINAL MESSAGE POSTED TO APPLE SUPPORT
    Ever since .MAC was recently down - and converted to Mobile Me - I have been having problems with my iWEB site:
    1. Frames around Photo Albums no longer display (on mac or win web browsers)
    - On Windows Computers - The Frames do not Display at all
    - On Mac (Safari or Firefox) they all look like see thru WIRE frames
    2. iWEB text box frames (that were once hidden) now seem to Display and
    they display in weir positions over and under other boxes.
    3. Safari Web Browser now ask to load certain fonts!
    4. Browsing my iWEB site is VERY VERY VERY SLOW!
    - From home
    - From work
    - over at friends
    In other words the speed of a persons internet connection does not seem to
    make any difference. It was all beautiful and fine before the transition, and now
    its slow.
    I have not done an upload to .MAC from iWEB for several months - so I don't believe it is anything I have done.
    My iWEB site is our FAMILY TREE site - so family members have been calling and telling me of the problems and the slowness over the past week.
    PS: I like the extra 10GB of storage, and the new Mobile ME features seem cool --BUT I MUST GET our family iWEB site running smooth once again.
    I have just recently upgraded to Leopard and for the most part everything is running fine - but as stated - I have NOT performed an iWEB upload using Leopard - the last was two months ago under Tiger.
    MacBookPro Intel Core Duo
    2.16GHz processor
    2GB RAM
    120GB Harddisk
    Mac OS X 10.5.4 (Jaguar - just installed July 7)
    Second posting to Support
    Hello,
    Ever since the transition - I'm still having the following problems with anyone trying to view my iWEB site (uploaded over 2 months ago before the Mobile ME transition).
    (of note: I performed the MobileME system update yesterday and that did nothing)
    1. Website redraw is VERY SLOW
    2. Text Box FRAMES are now Visible - when they were not before!
    3. Viewing my WEBSITE that I built using iWEB - the FRAMES applied to Photo and Movie Albums do not display properly as they did prior to the Apple mobile Me conversion. (see attached screenshot).
    As stated I have not done an iWEB upload for over two months - and everything was working fine until this Mobile me conversion. Now when viewing on Mac or Windows all of my Photo Album frames display improperly (they look like see through wireframes) when viewing in Safari or MS Explorer. NOTE: The albums will NOT display at all using FIREFOX.

    Since I recieved no responses I assume no one knows. Thanks anyway.

  • Enable / disable combo box in datagrid cell

    I have a datagrid with 8 columns 2 check boxes a text box and
    5 combo boxes. I am trying to disable the combo boxes if the first
    check box is not checked. So far I am able to disable the entire
    column with the combo box in it, but what i am trying to achieve is
    if the check box is false then the 5 combo boxes are to be
    disabled.
    So what I am asking in a nutshell is is there a way to enable
    or disable particular cells in a datagrid ?
    Example
    of what I have already done
    Any suggestions will be gratefully received.

    I put the following code in that I took from samples:
    Bindable]public var test:ArrayCollection;
    private  
    function init():void
    test =
    new ArrayCollection([{label:"High", data:"high"},{label:
    "Medium", data:"medium"},{label:
    "Low", data:"low"}]) 
    Then in the mxml:
    <mx:DataGridColumn 
    headerText="From Fiscal Period">
    <mx:itemRenderer>
    <mx:Component>
    <mx:ComboBox dataProvider="{test}">
    </mx:ComboBox>
    </mx:Component>
    </mx:itemRenderer>
    </mx:DataGridColumn>
    I still get the same error: 1120: Access of undefined property test.

  • How to don't display dialog after send data on BPC for Excel?

    Dear experts,
    I don't want to display dialog after send data on BPC for Excel, how can I do that?
    OS: MS XP SP2
    OFFICE : 2003
    BPC : 7.5 NW

    Hi,
    You need to change the macro assigned to the standard button. There are few macros available. You can try them and see which one suits you the best.
    MNU_eSUBMIT_REFSCHEDULE_BOOK_CLEARANDREFRESH: Sends workbook and clears data and refreshes workbook.
    MNU_eSUBMIT_REFSCHEDULE_BOOK_NOACTION: Sends data without clearing or refreshing the worksheet.
    MNU_eSUBMIT_REFSCHEDULE_BOOK_NOACTION_SHOWRESULT: Sends data without clearing or refreshing the worksheet, and shows the result in a window upon successful send.
    MNU_eSUBMIT_REFSCHEDULE_BOOK_NODIALOG_SHOWRESULT: Sends active book without any dialog and show result box.
    MNU_eSUBMIT_REFSCHEDULE_BOOK_REFRESH: Sends workbook and refreshes data.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_CLEARANDREFRESH: Sends data and clears and refreshes the worksheet.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_NOACTION: Sends data without clearing or refreshing.
    MNU_eSUBMIT_REFSCHEDULE_SHEET_REFRESH
    Hope it helps.

  • Calculator don't display numbers after comma in RPN mode

    Hello,
    In RPN mode, calculator don't display the numbers after the comma in the stack.
    Exemple :
    12345
    Enter
    0,12345
    Enter
    The calculator stack now shows :
    12345
    0 <-- should be 0,12345
    OSX : 10.5.1 (French)
    PowerBook G4 17" 1,5GHz
    Pascal

    I'm not going to create a new thread for this but the calculator has some SERIOUS problems.
    In scientific (yeah, right) mode, try dividing -1 by 2 and you'll see that it is, despite all the math you might think you know, POSITIVE one-half. (You probably thought dividing a negative number by a positive one would give you a negative number. You silly.)
    Also, while I'm resurrecting old and ignored threads, why can't the Programmer mode have a "word size" similar to the significant digits size for the other modes? Trying to do a series of shift operations on a 16 or 8 bit number is utterly inconvenient when it shows me 64 bit mode only.
    I suppose I can just keep my HP calculator next to computer for now since it's 17 years old, does RPN perfectly, and knows how to do basic math properly, but that seems to be missing the point that the Calculator should work right.

  • Disable combo box

    quick question does anyone know how to disable a combo box?thanks

    This help you to disable combo bos in Internet Explorer, but in other browser don't work. To other browser I used the onGotFocus or onFocus event (I don't remember the name exsactly). When the combo recived the focus in give the focus to another object.
    I hpe that will be helpful for you.
    Regards.
    Alejandro

  • Unicode Characters not displaying properly after updating to 13.0.1+

    Previously, I had installed the Symbola font because certain symbols were not displaying properly in Firefox (notably on Twitter). Installing the font solved the problem for the most part (the four bit hex characters still didn't show up, but the six bit ones did).
    After updating to 13.0.1 the other day, the six bit hex codes do not show the correct symbol anymore with Symbola still installed. I even deleted Symbola from my fonts, redownloaded it (a newer version, no less), installed it, and opened Firefox, and it did not solve the issue. Like the 50 million other things that Firefox broke with the update to 13. -_-
    EDIT: This issue has since persisted with 14.0.1.

    Try to install the DejaVu font.
    *http://en.wikipedia.org/wiki/DejaVu_fonts
    *http://dejavu-fonts.org/

  • Adobe Reader Shortcut Icons don't display properly

    Uninstalled and reinstalled latest version. Recently used program list on XP Home S3 Start Menu doesn't display Adobe logo and neither does Adobe Reader 9 shortcut on All Programs. PDF shortcuts display properly.
    Tried to search knowledge base and found no relevant articles. I can't believe you have to buy support for Adobe products.
    Thanks

    You can use Properties | Change Icon to adjust the icons on shortcuts.  Unfortunately this has to be done on each shortcut itself; it will not adjust all of them automatically.

  • Altered graphics don't display properly

    I am running Lookout 6.2 on a small panel pc.
    I am using custom graphics which up to now display properly. I needed to make a couple of changes to the graphic, which was done on another computer then the exiting graphic was replaced with the new one, using the same name.
    Lookout displays the graphic but with messed up colour (greens are reduced to shades of grey) and the image is fuzzy. Untouched graphics remain ok
    Solved!
    Go to Solution.

    Thanks Ryan
    The resolution and colour were all correct, so I had the graphic re-drafted and this time it worked.
    Yet another mystery

  • How to don't display dialog after send data?

    Dear experts,
      I don't want to display dialog after send data on BPC for Excel, how can I do that?
    OS: MS XP SP2
    OFFICE : 2003
    BPC : 7.5 NW

    I have moved this thread to the BPC NW forum.  Notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of the FPM - General (PCM, FC, Other) Forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future.
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

Maybe you are looking for

  • How to use SWX_GET_MANAGER

    Hi Friends,   Can you please give an example of how to use FM 'SWX_GET_MANAGER'... i really appriciate if you give some examples.. John.

  • Played Podcasts not deleted...

    I'm trying to understand what's going on here: I subscribe to several video and audio podcasts, including TED talks. I have the settings set for the default... when a new one is available, download the latest. Keep only the unplayed podcasts. All see

  • Use of printmagic 5.0 for mac

    I've used printmagic for several years. Since I installed SL I get an error message 9705. I've talked repeatedly with the developers of pm and they say it works fine on their demo of 10.6. They have concluded that it's a problem w/ my system. What sh

  • How to setup rsync daemon to sync with Netgear ReadyNas NV+ storage box

    Hi, Trying to sync data from a Solly 10 clustered box to this wee NAS box for DR purposes. Unfortunately, I do not have root access to NAS box and so rsync over ssh fails on authentication. I then discovered than it may be possible to call rsync via

  • Report who continues formatting until the end

    Hello I have a little problem with a report I must review. Normally, you run a report and it stop at first page and you can see it. Later, you will can go to next pages or until the end if you want. But this report continues running until the end wit