Disabled gmail clendar sync but still bday notifications appear after adding new contact

i've been able to get rid of the notifications by opening the calendar app nd going into options and typing wipe, after stopping it syncing, i've had no problem with fb since, but with gmail, i like to add the birthdays to my contact list, and even though i've unchecked the box for syncing the calendar, bdays still show up when i add a new contact. the perfect solution would be 1 where i could disable bday notifications as i use gmail calendar a lot on both my pc and phone, or if i could just delete the notification. does anyone know if there are plans to enable us to have more options in the notification screen, or a viable alternnative to completly wiping my calendars please. any help would be greatfully appreciated

Hello 10gazw,
Welcome to the community!
If you would like to disbale calendar notification, please follow belwo steps
1.) Click on Menu (Blackberry Sign) from Home Screen & click on maximise panel.
2.) Select Calendar Icon.
3.) Again Press Menu (BB Sign).
4.) Select Option.
5.) Click on Calendar Display & Action.
6.) There you may change the Option under Action...
Hope this will help you..
Good luck

Similar Messages

  • Mail sound settings set to None but still receive notification sound for all new mail

    My sound settings for new mail are set to Alert Tones: None, Vibrate Only, but I still receive a sound notification for all new mail.  Why is my phone not recognizing the setting?  I have turned off and back on the phone numerous times hoping that would help, but it has not.  How can I make the phone recognize the settings that I have purposefully set?

    afhammerC,
    So I understand: you have friends whose iPhone 4S's do vibrate when mail is received in silent mode, and no sounds are selected for new mail, but vibrate is selected for silent mode?
    Just want to be clear.
    My wife has an iPhone 4S 16gb, and it appears she has the same problem as well. 
    As an aside to the issue, I really wish there was a way to have a timer on the notification center so we could put one, many, or all apps' notfication to sleep during a specific time period (say, during the night).  V. annoying to have to disable notifications separately.  Would love a way to turn them off between, say, midnight at 6am.

  • Can anyone help me deleted this existing photos in my photo library.i already did to sync it up on itunes ang remove all photos ang sync.but still there is 5 photos in my general about eventhough my camera roll is empty.plsss help.thanks.

    can anyone help me deleted this existing photos in my photo library.i already did to sync it up on itunes ang remove all photos ang sync.but still there is 5 photos in my general about eventhough my camera roll is empty.PLEASE HELP!Thanks.

    i mean "and" not "ang" btw.

  • HT1386 I cannot get apps I purchased now sitting on my pc onto my iphone.  They were there before I upgraded to 6.0.1.  I backed them up on my pc and I can see the apps are all there.  But after syncing they still don't appear on my phone.

    I cannot get apps I purchased now sitting on my pc onto my iphone.  They were there before I upgraded to 6.0.1.  I backed them up on my pc and I can see the apps are all there.  But after syncing they still don't appear on my phone.

    You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

  • Is there someway to disable the Outlook sync process when I hook up to my computer?  I don't mind the AOL e-mail sync, but do not want or need the Outlook contacts/e-mail sync.

    Is there someway to disable the Outlook sync process when I hook up to my computer?  I don't mind the AOL e-mail sync, but do not want or need the Outlook contacts/e-mail sync.

    With the phone connected, go to the info tab for the phone in iTunes. That's where you specify what contacts, calendars, e-mail accounts, etc. to sync and to what applications.

  • I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

    I have a 1and1 email address but when I complete all the setting up info it says that either the imap user name or password is incorrect. I have attempted it many times since carefully putting in the correct info but still same message appears. Any ideas?

    If this is a Gmail account you might need to unlock by going here: https://accounts.google.com/DisplayUnlockCaptcha.

  • Disable all print apps, but still print thru email

    On my new HP Photosmart 6520 e-All-in-One printer, I want to disable all print apps, but not all web services: I still want to keep the ability to print photos and other files from all my devices thru email, as well as on my wireless LAN at home.
    Is there a way to do this without removing every print app individually?

    Hi,
    That can be done by removing each app indicidualy as listed below:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940901&tmp_task=setupCategory&cc=us&dlc=en&lc...
    Other thean that, the only option to disable any of the print apps is to disable and re-enable the Web Services for your printer, however be aware that by performing a such you will need to select a different ePrint email address for your device as the current one will be locked for 6 months and will not be able to be used due to security reasons.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT204053 Why my Apple ID been disable, try change password but still disable

    My apple ID been disable, i try to change password and apple ID name but still disable when i try to download or update apps from app stores

    Hi Damiakun,
    For a disabled Apple ID:
    http://support.apple.com/kb/TS2446
    Cheers,
    GB

  • TS2446 My Apple ID disable , and I did the steps but still the message appearing the ID disable

    Dears Support ,
    I facing problem , when I'm trying to update my Applications and download
    Any application , I facing message that my Apple ID disable , I did the step on apple website
    Related to enable the Id through mange Account and reset the password
    But still the ID disable , so please I need your help to identify the problem and how
    I Can resolve it
    By your advise ..,
    Best Regards  
    <Email Edited By Host>

    Welcome to the user to User Technical Support Forum provided by Apple.
    Please do not post personal information on a Public Forum.
    I have requested the Hosts remove it for you.
    For your issue...
    If disabled for Security Reasons... See here  http://support.apple.com/kb/TS2446
    If not for Security reasons...
    To Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • User Mapping to R/3 - admin.pwdprotection=false but still pwd field appears

    <br />
    Hello All,<br />
    I am doing SSO using user mapping to R/3 system from Portal as the ids are different for Portal and R/3.<br />
    I can access a transaction iview from R/3 successfully using user mapping(in SSO) but the problem is everytime a user changes his R/3 password, the mapped password is to be changed in Portal.Otherwise, unable to access transaction iview.<br />
    1) I have changed the property ume.usermapping.admin.pwdprotection=false in configtool but still in User Admin > User mapping for system access , the password field is populated and while accessing the R/3, the password is being verified. I have seen in another system where the password field is not being asked after modifying the property to false, only id field is present. From the end user, under Personalize > User Profile > User Mapping for system, no systems are present as expected for mapping. Logon method in system is uidpw and mapping type is "Admin".<br />
    Versions - Portal is NW7.0 SP18 and ECC is .0 EhP3.<br />
    anybody faced the same problem? Is there a note to fix it?<br />
    2)Also, in the User Admin > User mapping for system access , in the dropdown I can see the system aliases I have created in systems but not in System admin> sys config > Ume config > under User Mapping , I do not find any reference system. <br />
    After first restart it was not there, after some time it has come, later it was coming as configured but invalid beside the system in braces in dropdown like abc(configured but invalid). Once I unselected, now it is no more available in dropdown.<br />
    3) I have used diagtool to identify the problem. In the ticket, how do I see the mapped user?<br />
    I am seeing only the following details.From the log - <br />
    The created ticket is: <br />
    [ [Ticket [initialized]<br />
      Ticket Version  = 0<br />
      Ticket Codepage =  (Encoding=1100)<br />
      User = 121444<br />
      Issuing System ID     = EPD  ( Portal name)<br />
      Issuing System Client = 000<br />
      Creation Time = 200905150649<br />
      Valid Time    = 8 h 0 min<br />
      Signature (length=261 bytes)<br />
      InfoUnit id=32, name=portal_user, content=portal:121444, length=16<br />
      InfoUnit id=136, name=authscheme, content=basicauthentication, length=19<br />
      InfoUnit id=1, length=9<br />
      InfoUnit id=2, length=3<br />
      InfoUnit id=3, length=3<br />
      InfoUnit id=4, length=12<br />
      InfoUnit id=5, length=4<br />
      InfoUnit id=10, length=9<br />
    ]. <br />
    Authentication stack: [ticket].<br />
    <br />
    Does this have an entry for mapped user of target R/3 system also?<br />
    If I am not finding the userid/pwd in ticket, how is SSO working? based on user mapping only?<br />
    Thanks,<br />
    Isvarya<br />

    Thanks Anja for the quick response.
    My primary objective is to use SSO with logon tickets to backend which is independent of user passwords.
    regarding 1)
    From the link -
    http://help.sap.com/saphelp_nw70/helpdata/EN/f8/3b514ca29011d5bdeb006094191908/frameset.htm
    Features
    ●      Either users or administrators can perform user mapping.
    ¡        Users must always enter a password to validate their mapped user ID.
    This password is not stored, but is used to confirm that the user is entering a user ID with which he or she has access to the ABAP-based system.
    ○       Administrators can enter a password to validate their entries.
    The UME property ume.usermapping.admin.pwdprotection defines whether or not the administrator must enter a password. By default the administrator must enter one.
    is also in the same lines.
    But as per the SAP library link, I do not find a reference system  because of problem 2 in the initial post.
    Also, I have a screenshot of user admin where the password field itself is not present. If you can share your email id, I will send the scrnshot without pwd and mine with password.
    2)I have seen this note. But, none of the 3 cases mentioned are applicable to me..user mapping is working just fine..Only reference system is not populated. 
    3) Becuase of 1, I was expecting to see mapped id alone or mapped id along with system name in logon tickets.
    Thanks for the response.

  • ITunes says my iPod is synced but songs are not appearing.

    I had to start all over with my iPod because all of my files were erased. I downloaded a bunch of new songs and videos and when I sync my iPod, a message appears saying that three of the files cannot be copied. I used to get that before too, so no big deal. But when I look on my iPod, the songs are not there. It is not telling me that it cannot be synced and the bar at the bottom of the preferences page or w/e says that I have 1.60 GB of music, 795.1 MB of video, and 25.42 MB of 'other'. I have already authorized this computer. Why won't it sync properly?

    iTunes can "sync" an iPod, and not transfer any songs.  You may need to set up or update automatic syncing in iTunes for the iPod.  Otherwise, syncing may sync nothing.
    First, if the iTunes sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar.  When connected, the iPod appears in the sidebar, under DEVICES. 
    Second, when you set up automatic syncing, the iPod's existing content is replaced.  Any songs on the iPod that are not in your iTunes library will be lost.  Is that OK?  If that's a problem, please post back.
    Select the iPod in the iTunes sidebar.  To the right, the iPod's Summary screen is shown.  Toward the top, there is a bar of buttons starting with Summary.  Click on Music next to Summary.  This Music screen is where you tell iTunes how to sync songs to the iPod.
    Check the box for Sync Music.  This setting enables automatic syncing.  If your iTunes music library can fit on the iPod, you can choose to sync Entire music library.  Then, "everything" (that is music) syncs to the iPod when you click Apply.  Going forward, any changes to the music library sync automatically to the iPod, at the next opportunity.
    Otherwise, you can choose to sync Selected playlist, artists, albums, and genres.  Then, select (checkmark) what you want on the iPod from the lists below.  For example, you can have playlists in your iTunes library with songs you want on the iPod.  On the iPod's Music screen, select those playlists under Playlists.  When you click Apply, the songs in your selections sync to the iPod.  Going forward, to update your iPod, update those playlists in your iTunes library (add/remove songs).  The iPod does not need to be connected.  The next time the iPod is connected (or when you click Sync if already connected), iTunes updates the iPod with the same changes automatically.

  • HT1386 My ipod is syncing but music is not appearing onto it, help?

    It's appearing in itunes and syncing but when i check the content tab or the ipod's library itself, nothing is there.

    Do you have the right boxes checked to sync?
    iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
    Have you successfully synced from this iTunes library/computer before?

  • IPod Classic fails to sync after adding new music

    Hi, so lately I've been having problems with my 160GB classic, I've always had problems with it but its gotten to the point where I am frustrated beyond belief. SO the problem arises when I add new music, it comes up with the error 'XXXX's iPod cannot be written or read'' and before it displays this message the sync usually sticks on a song, a random song that I would've added. I restored it a few times, scanned and fixed it a few times and then when I noticed I started skipping songs, some in mid-song I restored it again and the problem repeats itself. Help would be appreciated

    A few issues, but sorry let me try to understand.
    Adding new music, 'XXXX's iPod cannot be written or read'' can you let me know the number. most likely music format is not iPod Compatible like HE-AAC.
    started skipping songs  - these are normally due to corrupted ID3 tags, try converting them -File-> Advance -> IPOD version or use MP3 validator to fix all songs in the library. (My Apologies, only work for MP3 music that skipped)
    As for item 2, you can try Hard Reset if you like to download MP3 validator.
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Good Luck!

  • Adding new contacts but the requests are not going...

    Hi, 
    Please assist me on this critical issue. I was using latest version of skype that is 7.5 as it upgraded itself many times during the years. I have been adding new connections to my account as i deal with social media websites. Recently i discovered that the contact requests are not going through. 
    I mean the contacts are real and they are active but when i add them to my skype. The request was sent but not delivered actually. I tested that by creating one more personal account. I have sent request from my primary account to the new one. I checked the new account to see if i got the request or not. And yes there was no request. 
    Then i tried sending request from my new account to the primary one. And i got the contact request. Wondering is that issue related to my account or version. I am sure it is not the case with the version because the new account is using the same version too.
    Please let me know. My skype - [Removed for privacy] and I would like to test it with some of your guys here. 

    Thanks everyone.
    It worked when I changed "Point.java" as follows:
    public class Point {
         private int x;
         private int y;
         public int getXCoordinate()
              return x;
         public int getYCoordinate()
              return y;
         public void setXCoordinate(int newX)
              x = newX;
         public void setYCoordinate(int newY)
              y = newY;
         public Point(int x, int y)
              setXCoordinate(x);
              setYCoordinate(y);
    }Edited by: Abder-Rahman on May 8, 2009 1:10 PM

  • Apps won't open after IOS5. Re-synced but still won't open.  Is there a way to delete them and then reload them again?

    I had no problem in downloading a free app after updating to IOS5.  I thought everything was o.k. but when I tried to launch an app, it just blinked and nothing happens.  I had a notification before updating to IOS5 that I should back up my app purchases.  All of the apps I had were free so I ignored it.  Well, that appears to be my problem.  Now, my Ipad shows the apps but they don't work.  Is there a way to delete them so that I could reload them again?

    Did you try syncing with iTunes again since you update the software? You could try that first. connect the iPad to your computer and sync again - not WiFi sync - traditional, old fashioned sync. You will have to turn off WiFi sync in iTunes and then hit the apply button.
    Or you could try these basic troubleshooting steps.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Maybe you are looking for

  • Logical and Physical Length in Datastore

    I would like to know the differences between logical length and physical length in datastore. Can anyone teach best practices to use them properly?

  • How to identify a rehire candidate?

    Hi, Please let us know if you have worked on the following: 1) How can we identify in e-recruiting that an external candidate was a previous employee of the company at some point in time? OR how to identify that the candidate had a record in SAP PA i

  • Alter system kill session in RAC

    Hi, After identifying all inactive jdbc sessions or blocking sessions from gv$session or gv$lock respectively, should alter system kill session executed in both instances of RAC?, Can't we execute like alter system kill session ' inst_id,sid,serial#'

  • Galaxy Nexus Periodic Restart / Reboot

    I have had my galaxy nexus since it came out  12.15. Since then it has been rebooting itself for no apparent reason. It is occurring something like 7-10 times a day. It has happened while tethered, while the alarm was going off, while on a call, whil

  • Very Important Scenario - Filling Tables with Data

    Hi, For my current project, the custom (z) staged table will be filled every night with data, based on data and calculations on the previous day's material movements, for the company code selected on the selection screen (via a scheduled job that run