Disabled GoToNextPage and GotoPrevPageButton when load the ReportSource
GoToNextPage and GotoPrevPageButton from CrystalReportViewer be disabled when I set the ReportSource on CrystalReportViewer. Curiosly, if I change the zoom value through the widget of Viewer, the two buttons refresh his state and enabled again.
Exists some way for force refresh his state when change the ReportSource? I did try change programatically the ZoomFactor value, but without luck.
Many thanks for the help.
Now see the problem...
Problem in using WPF CrystalReportViewer
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap%28bd1lbizjptawmq==%29/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533323339333033313332%7D.do
When I could download the Service pack 2??
Regards
Similar Messages
-
Error -5000 and: Error when loading the transcode setting
For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems
-
Using an iPod Classic on a Bose sound dock....when loading the iPod from the Mac, what "Import Settings" (under iTune "Preferences"), should be used to maintain a constant sound level when playing music? Mac OS 10.6.8, iTunes 10.6.1.
There are many Import Settings available and it is somewhat confusing. Any suggestions?Go to iTunes>Preferences>Playback. Tick "Sound Check."
iTunes: About Sound Check -
When trying to download apps on my new iPad I keep getting prompted to update my security questions for my safety. When I choose this option it freezes and won't load the questions, however, when I hit not now it won't let me download. What do I do?
Reboot your iPad and then see if you can set the security questions.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. -
Adobe reader XI crash and hangs when open the pdf file
After update the adobe reader xi 11.0.10, the reader always crashes and hangs when open the pdf file. Please help me how to do.
Ben Leung wrote:
HThis situation is started after I clear the pop up advertisement.
What kind of advertisement? In Adobe Reader? Can you post a screenshot of that: https://forums.adobe.com/thread/1070933
Regarding the crash, can you try disabling Protected Mode through the registry: download, unzip, then run the registry script https://files.acrobat.com/a/preview/49eeb48b-07c5-4502-984c-8a25259914fa -
An error occurred when loading the Cube ; Analysis services 2012
Hi All
We are facing issue on our SQL Analysis services 2012 (11.0.3381.0) on windows 2008 R2.
All cubes are not getting loaded on server. When we restart services some times 2/8 cubes some times 4/8 cubes and some times all cubes get loaded. We are not sure what could be reason for such in consistency. Below are the logs
Failed to load server plug-in extension defined in assembly System. The following error(s) have been raised during the plug-in initialization. Loading of the System assembly failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException;Could
not load file or assembly 'msmdspdm, Version=11.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. Strong name validation failed. (Exception from HRESULT: 0x8013141A)
Strong name validation failed. (Exception from HRESULT: 0x8013141A). Enumeration of types or functions through reflection in managed code failed with the following error: Microsoft::AnalysisServices::AdomdServer::AdomdException.
OLE DB or ODBC error: Query timeout expired; HYT00.
LOGS :
(12/6/2013 7:45:12 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the Claim Industry Summary Metrics Current. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:37 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:41 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:42 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:44 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:45 AM) Message: An error occurred when loading the AW Cube. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 3, Category: 289, Event ID: 0xC1210013)
(12/6/2013 7:46:55 AM) Message: Service stopped. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210001)
(12/6/2013 7:47:04 AM) Message: The Query thread pool now has 1 minimum threads, 40 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingShort thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The ParsingLong thread pool now has 4 minimum threads, 4 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The Processing thread pool now has 1 minimum threads, 64 maximum threads, and a concurrency of 20. Its thread pool affinity mask is 0x00000000000fffff. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000A)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x000000000000001f now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000003e0 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x0000000000007c00 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:04 AM) Message: The IOProcessing thread subpool with affinity 0x00000000000f8000 now has 1 minimum threads, 50 maximum threads, and a concurrency of 10. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x4121000B)
(12/6/2013 7:47:11 AM) Message: The flight recorder was started. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210005)
(12/6/2013 7:47:11 AM) Message: Service started. Microsoft SQL Server Analysis Services 64 Bit Enterprise (x64) SP1 11.0.3381.0. (Source:
\\?\L:\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log\msmdsrv.log, Type: 1, Category: 289, Event ID: 0x41210000)
Thanks
Saurabh Sinha
http://saurabhsinhainblogs.blogspot.in/Hi Saurabh,
Please elaborate your scenario or OLAP Server environment with more detail. What's the method you used to load the SSAS cube?
For this issue, I would suggest opening a case with Microsoft Customer Support Services (CSS) (http://support.microsoft.com), so that a dedicated Support Professional can assist you in a more efficient manner.
Regards,
Elvis Long
TechNet Community Support -
I am trying to upload photos from my iPhone to my macbook but each time I plug my iPhone into the macbook, a message comes up which says my device is locked with a passcode and I cannot load the photos. When I plug my phone in, it is on the home screen and unlocked so I don't understand what I am doing wrong. This has never occurred before. Please help.
Get a powered USB hub.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents -
Error when loading the callback component
Hi friends
Am getting this error. Error when loading the callback component. Am working in Travel expense workflow which is 2 level based on condition. If its EG > 8 its one level and EG < 8 its 2 level. When the approver does the approval am changing the status from 3 to 4 at that time the pernr is getting locked. Next step itself mail step. But the workflow is throwing the error and mail its hanging in the mail step. I have try to restart the workflow but its not restarting. Error when loading the callback component this error is showing in the lock pernr. Am not locking the pernr system locks the pernr by itslef and not unlocking the pernr. How to solve this issue.
Regards
vijayHello,
Check if OSS Note 854495 is applicable.
regards
Rick Bakker
Hanabi Technology -
The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Error message: An error occurred when loading the content. Please try again later
Why do some radios do not work on the Apple TV as iTunes, there is no problem ...?
Error message: An error occurred when loading the content. Please try again later
ThanksHaving this problem today. You Tube and other internet parts of the apple tv works. I just can't access my iTunes tv shows.
-
I am using VPN, and Firefox is loading the page. Before I reinstall the new version, the VPN was working okay. Whta happened, what I am supposed to do?
I have to use the VPN to acess the site because of the limitatation , and it was working okay. When I do turn off the VPN, then the sites will open, but if I activate the VPN, then site will load for ever, but they won't load.
Please advise me what to do?You might try using the add-on 'NoSquint' which allows numerous zoom options specific to each page you visit & keeps your settings - https://addons.mozilla.org/en-US/firefox/addon/nosquint/
If you want to go back to 3.6x, you will find it here:
http://www.mozilla.com/en-US/firefox/all-older.html
In most cases you can simply "upgrade" (meaning downgrade) directly from the installation. It would be a good idea to save your passwords & bookmarks just to be on the safe side. -
When loading the music application on iPhone 4s it has a iCloud symbol with a loading bar but isn't loading... any advise to help?
keith
You have posted your issue in Using Apple Support Communities whose topic is 'How to use this forum software's interface, features and/or how to find what you wish'. It is a relatively low traffic and inappropriate forum for your problem. I will ask our Hosts to move it to Using IiPhone where it may get a more rapid response from your fellow users.
ÇÇÇ -
I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud ConnectionHi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit -
Photoshop CS6 crashes all the time and especially when using the type tool... please help!
Since I did not have this problem with CS5 or CS4, I can only assume something is not right with Photoshop CS6... below is my video card info:
ATI Radeon HD 4850:
Chipset Model: ATI Radeon HD 4850
Type: GPU
Bus: PCIe
PCIe Lane Width: x16
VRAM (Total): 512 MB
Vendor: ATI (0x1002)
Device ID: 0x944a
Revision ID: 0x0000
ROM Revision: 113-B9110C-425
EFI Driver Version: 01.00.383
Displays:
iMac:
Resolution: 2560 x 1440
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes
Built-In: Yes
Connection Type: DisplayPort
Cinema HD:
Resolution: 1920 x 1200
Pixel Depth: 32-Bit Color (ARGB8888)
Display Serial Number: 2A80273WXMN
Mirror: Off
Online: Yes
Rotation: Supported -
Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
SrinivasaDear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace();
Maybe you are looking for
-
Error while using selection option variable in the selection screen
Hi All, I am facing an issue while using selection option variable in the selection screen for one of my reports. Scenario: For the field "Region From" we need to have wild card logic () in tes selection screen, for example if we put "BE" in the sele
-
Hi, Baseline date is configured based on Payment Terms, that can be possible using customizing, there is no relation with GR date and other dates. Still if you want set the Baseline date with some other default date or PO date, or GR date, - IT IS PO
-
Urgent : Changing System Parametes
Hello, How do we change system parameters in 6i reports during run time or at the beginning of the report design? Regards, Dinesh.
-
Cannot clear recent history in Private Browsing Mode
Hello, so why is this option disabled in the private browsing mode? It can be useful to clear cookies without restarting Firefox! This is a pity :-(
-
Can we create DBI dashboards, reports, etc. in Arabic text?
Hi! Can we create DBI dashboards, reports, etc. in Arabic text? If we can create forms in Arabic, does it mean we can also do the same in DBI? Thanks.