Disabled NTFS-3G External HD now Mac won't recognize the drive

Hi,
I recently unmounted my WD External HD from the NTFS-3G preference pane, now my Mac is unable to recognize the drive. When I open Disk Utility the drive is there but i am unable to do anything with it.
How do I re-mount the drive to NTFS-3G and have the Mac read it again. I tried uninstalling NTFS-3G, reinstalling it. Removed files from the system folder. Even uninstalled and re-installed MacFuse.
I am stuck as to how to make the make recognize the drive again like before.
Any suggestions?
I am running Mac OSX 10.6.8 Snow Leopard.
Thanks
-E

make sure you have the exact path written correctly. If you can, show what the filename is in itunes, and the filename when you are looking at the song files (i.e. through my comuter). Make sure these are the same, and that they are all usable itunes formats.

Similar Messages

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

Then new version of IMovie imported nearly all of my video and then suddenly closed. Now it won't recognize the video that it stil hasn't imported? I took the sd card out of the canon camcorder but still won't recognize or import it. Is there a cache t

Then new version of IMovie imported nearly all of my video and then suddenly closed. Now it won't recognize the video that it stil hasn't imported? I took the sd card out of the canon camcorder but still won't recognize or import it. Is there a cache that needs cleared?

Did you get any joy with answering this?
My first thought was that maybe when you imported you chose to leave the files in place rather than copy then to the iMovie library..but I can't see where that option is now.
I too have created a short movie from load f clips..but can't export or share either..the 'Share 'menu is empty..you go to it and no sub menu appears.

TS1369 this is the first time that i'm trying to connect my new ipod shuffle and my computer won't recognize the driver?

My computer won't recognize the driver for my Ipod Shuffle. This is a brand new ipod so why is there an issue?

Have you tried uninstalling and re-installing iTunes and all other Apple software to see if that makes a difference? Use the exact instructions in this article.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
B-rock

I installed 10.5.8 to my IMac 5 and now it won't recognize a driver for my printer which is an HP PSC 1610. I downloaded the software from HP again and it still says it is searching for drivers

I installed 10.5.8 to my IMac 5 and now it won't recognize any drivers for the printer which is an HP PSC 1610. I downloaded the software and driver from HP and it still says it is searching for drivers to install the printer.

May be worth looking here:
Printer & scanner drivers for OS 10.5 and 10.6:
http://support.apple.com/kb/HT3669?viewlocale=en_US

My Mac won't recognize the battery...

Annother question...
My MacBook only works if it is plugged in because the old battery did not work. I got a new battery hoping that it would work but my Mac will not recognize that there is a battery at all. What do I do?

This is what it shows on the battery icon when my battery is in the Mac...

I remove my hard drive from time machine,now it won't recognize hard drive

i got a delayed error on my time machine backup saying Time Machine couldn’t complete the backup to my back up hardrive, so what i did i removed my hard drive in time machine "select disk" , thinking if ill plug it back it'll recognize but it didn't.. now it wont show anymore on my time machine, but it shows on my mac computer and disk utility.. how do i fix this? please help... i have the late macbook pro 2010 running osx mountain lion

Try repairing it:
Open Disk Utility in the Utilities folder. Select your Time Machine drive in the list on the left. Click on the First Aid tab in DU's main window, click on the Repair Disk button.

Garageband '08 - Mac won't recognize the Line-in input.

I've had my mac for a while now but i havent been using the line in input to record much. The last time i used it i plugged in my electric guitar directly into my mac and on garage band i can see that it is only receiving signals on the left but not on the right. i thought it was my guitar's fault or the cables fault. Checked my guitar, bought new cables but the problem persists. But this time i'm not getting any signals at all!! i've tried everything. I bought a usb interface but that didn't work. so if anyone has any ideas please help me.

I have to admit that the links posted DO share some important info, however using the line input
requires some knowledge.
You have to know the difference between stereo and mono, the relative impedances of your equipment v. the line input, and most importantly what level your stuff puts out v. what level the line inpt expects and can deal with.
it is very VERY easy to screw up with the miniplugs and short out the inputs which it seems several people have already done.
I use a very VERY cheap mixer and a simple two-RCA to One-mini stereo cable. ( a pretty sturdy one)
That gets me a clean input with the channels correctly separated , impedance correct and a controllable level at a ballpark setting that does not overload or stress the input.
It may sound overly technical to you, but all of this info is contained in the manuals for things like keyboards, and mixers. Guitars are a different story and should not be plugged directly into a line input. ( Impedance and level are specialized in electric guitars and require a certain matching )
I am sorry that so many have problems with this, but there are things to know. ( Not flaming anybody here). I just recently got a USB interface.
Installation was dead easy, but I found it necessary to read the manufacturers FAQs and forums to get just the right settings to use it, hear it, and not blow anything up.
And I have MASSIVE experience. And I have blown things up in the past.
Just for instance, The line level coming out of the Mac is -10db, And I assume the input is -10db too, which is perfectly normal for prosumer audio. But if you use a mixer, and it's a pro model you will have a +4 db output (Blow up time), so you have to control it.
Impedance is usually measured in k-ohms for these things and an input should have at least 10 tiems the impedance of the output plugged into it. Guitars like a 1megOhm input. Line level devices rarely have 1 megOhm inputs, so guitars require either a preamp or passive matching device at the least. even a pedal can help with this.
Maybe this can help a couple to not fry their inputs.
Message was edited by: James Asherman
Message was edited by: James Asherman
Message was edited by: James Asherman

I received pictures in a dozen emails and saved each picture into one file in .pages. I did not import the photos before doing this and now iPhoto won't recognize the pictures because they are in a .pages file. How do I get the pics to iPhoto?

I received a dozen pictures in a few emails and I saved them all into one file in pages. I just copied and pasted. I do not have the originals any longer. Iphoto will not permit me to import the pictures as it does not recognize a .pages file, nor can I simply click and drag from the pages document to iphoto nor from pages to the desktop to iphoto. How can I save each picture I guess back into a jpeg and then import them into iphoto or have i lost them to a pages document forever? This is urgent as I need the pictures made into a book on iphoto for work by Friday!!! Please advise! Thank you.

Greetings,
Locate the Pages document wherever it's located on your computer and click once on it to highlight it.
Go to File > Duplicate to make a backup copy of the file.
Click once again on the file to highlight it.
Go to File > Get Info
In the "Name & Extension" category remove the ".pages" extension and put in ".zip".
Close the info window and double-click the now renamed pages file (zip file now).It will decompress into a folder which contains all the base components including all the images you added. These can be dragged onto the iPhoto icon to import them.
Hope that helps.

Help!- ipad was disconnected when updating software...now it won't recognize the ipad and can't complete a restore.It can't recognize the serial # or name,etc..

i was updating my ipad to the new ios software. the cable got disconnected just as it was completing the update. when it connected again it said i need to restore it. Once going thru the restore process, it said that Itunes can't recognize the ipad. one note, the ipad shows on my itunes as a "IPAD" and no name, serial #, etc... The ipad has a symbol on it telling me to connect to itunes

A System Reset cures many ills. It's easy, quick and harmless:
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears.
A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
Also, you might wish to download the iPad-2 User Guide. Pay special attention to page 162. Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
http://support.apple.com/manuals/#ipad
Finally, the User Guide can be downloaded at no charge via iBooks and a less comprehensive version of the Guide is included as a Safari bookmark.

My mac won't recognize my external hardrive!!

I have a Maxtor One Touch II 300GB external hardrive with all of my pics and backups, and ever since I installed Leopard it won't recognize the drive. I've read other forums and know it's because it's password protected and Seagate or Apple has come up with a solution yet. So I did the only other thing I could...re-install Tiger with my backup disc which was 10.4.7 for my Mac mini Intel. Now it still won't recognize the drive! The software doesn't automatically startup and even after starting it manually it doesn't recognize. I'm guessing because when I re-installed Tiger and it asked me to archive the newer version it must have kept the same coding or whatever. I don't know much about coding so I'm lost there. I have my Powerbook G4 with Leopard on it, but of course it won't recognize that drive on there either. Right now I have a few options I could re-install Tiger on my powerbook and erase everything, but I can't find the install disk and I'm not sure the install disk from the Mac-mini will work because it's for the Intel processor hopefully that won't matter. Another option is to try and see if my wife's HP with Vista will recognize it, but the drive is formatted for Mac so I'm not sure if it'll work and ask for a password. I'm stuck at frustrated right now...if I could just get a computer to recognize it, take the password off... I would shell out the money to get a new drive recognizable by Leopard and transfer the data over. I DO NOT WANT TO ERASE THIS DRIVE!! I know it still works, but I can't access it. Anyone got any ideas?

Follow the instructions in the section of this FAQ which is relevant to your situation.
(21534)

Mac won't recognize 5G

my 30gb 5G ipod was running great on my mac. Then I plugged it into a PC that didn't have ipod software installed on it, but now the mac won't recognize the ipod at all. what do i do?

There are more suggestions in the link than what you say you tried...
Anyhow, does this apply?
http://docs.info.apple.com/article.html?artnum=61937
btabz

Computer Won't Recognize Hard Drive

I wanted to do a clean install of OS 10.5. Wiped hard drive using Tech Tool Pro 4. Now computer won't recognize hard drive during install. When it asks to what volume I want to install the OS, the screen is blank. This is a new one on me.
Anyone have any ideas? Thank you.

Boot to the Installer/Utilities DVD, but DO NOT Install.
Answer only the "what language" question if presented, and wait a quarter minute for the MenuBar to be drawn. Choose Disk Utility from the Utilities menu or the Installer menu.
Use Disk Utility to Erase the drive again. Be sure you are getting Options GUID partition map.
Then use Disk Utility to partition the drive to one partition, Mac OS X Extended (Journaled).
Select the drive and choose Mount. It should not produce an error. Now you are good to go on the Install.

What do I need to do to be able to read and write files to a Seagate Backup Plus Slim Portable Drive on BOTH a Mac and a PC? I downloaded "Paragon NTFS for Mac" onto my Mac, so now I can write to the drive, but when I plug it into a PC it won't work.

What do I need to do to be able to read and write files to a Seagate Backup Plus Slim Portable Drive on BOTH a Mac and a PC? I downloaded "Paragon NTFS for Mac" onto my Mac, so now I can write to the drive, but when I plug it into a PC it won't work.

If the HDD is formatted NTFS, then it suggests that there is a problem with the PC. Check with the manufacturer.
Ciao.

I downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

i downloaded the iPhoto update and now it won't open the library on my external hard drive telling me it is locked (which it isn't) what do i do?

What version of iPhoto?
What format is the disk?

Disabled NTFS-3G External HD now Mac won't recognize the drive

Similar Messages

Maybe you are looking for