Disabled/readonly=false, the value will not summited.
The value of the inputText is missing if i set the disabled/readonly to false and other component's validation fail. How to solve the missing problem?
As far I understand, you're complaining that the value of a normal input field, which is not disabled or readonly, will disappear when the validation on another input field fails?
Differnece between disabled and readonly is that the first one doesn't submit values to the server, while the second one does. Both they are not changeable.
Similar Messages
-
I just run the Flashback malware removal tool, and then nothing happens. Will it be a problem? and if I have java installed and I disabled it during the installation, will my status as my machine has not java installed? thanks.
Will it be a problem?
No.
...if I have java installed and I disabled it during the installation, will my status as my machine has not java installed?
Java is still installed. -
the external GPS is used only for 911 but the device will not operate without it...this causes great inconvenience for me, having to run that cable to a window in the two houses I use it..is there a way to disable the GPS if I do not care about the 911 functionability..? this is the only downside I have with the network extender and it renders my device useless..
Nope, GPS is a Federal requirement for anything operating a cellular telephone signal. You don't ever plan to call 911 until you are in an emergency. I don't see that requirement changing any time soon.
If you are truly inconvenienced by the VZW network extender then perhaps you should disable you calling features in these areas and swap over to WiFi only. There are many services and apps out there that can route your phone services through internet service providers. -
My daughter updated to the ios 7 and it asked for a passcode. The phone will not except the passcode and now her phone is disabled. Anyway to unlock without resetting?
That's because the device has not been synced to that computer. As per my earlier instructions... you will have to force it into recovery mode & restore as a new device.
Recovery Mode... http://support.apple.com/kb/HT1808 -
How do I disable firefox off line it will not let me connect to the web
how do I disable firefox off line, it will not let me connect to the web
Go into settings and reset all network connections. Then restart your device by holding the power and home button until the Apple logo appears. You will not lose any data. When the device restarts connect to your wireless network.
-
Below issue is with only one client in that untrusted domain. So boundary is not the issue.
Env -
mydom.com has SCCM PRI site (MP, DP as well).
Client is in untrusted forest.
Please help.
Thanks
MP 'mysccm.mydom.com' is compatible ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrieved 1 MP records from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Retrived site version '5.00.7958.1000' from AD for site 'pri' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteCode: pri ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
SiteVersion: 5.00.7958.1000 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Deleted file C:\Windows\ccmsetup\client.msi ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Only one MP mysccm.mydom.com is specified. Use it. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Searching for DP locations from MP(s)... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD site of machine is Default-First-Site-Name LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Local Machine is joined to an AD domain LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Current AD forest name is staging.local, domain name is staging.local LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
DhcpGetOriginalSubnetMask entry point is supported. LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Begin checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Finished checking Alternate Network Configuration LocationServices 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="pri"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site-Name"/>
<Forest Name="staging.local"/>
<Domain Name="staging.local"/>
<IPAddresses>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.134"/>
<IPAddress SubnetAddress="10.72.117.0" Address="10.72.117.142"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Sending message header '<Msg SchemaVersion="1.1"><ID>{5B972249-B931-4739-9EFA-A9FDE29C351A}</ID><SourceHost>STAGINGSRVR07</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:STAGINGSRVR07:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>mysccm.mydom.com</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1264"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
CCM_POST 'HTTP://mysccm.mydom.com/ccm_system/request' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Received header '<Msg SchemaVersion="1.1">
<ID>{D4EF0A4D-A000-4697-9AFA-B1317B09931D}</ID>
<SourceID>GUID:21298681-5080-4365-B614-F0C8DF67452B</SourceID>
<SourceHost>pri1SCCM02</SourceHost>
<TargetAddress>direct:STAGINGSRVR07:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<TargetHost>STAGINGSRVR07</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-11-04T17:14:55Z</SentTime><Body Type="ByteRange"
Offset="0" Length="2408"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">pri1SCCM02;mysccm.mydom.com;</Property><Property Name="MPSiteCode">pri</Property></Hook></Hooks><Payload Type="inline"/></Msg>' ccmsetup 11/4/2014 12:14:55
PM 4816 (0x12D0)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="pri" MasterSiteCode="pri"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002"
Signature="<ADSite">http://mysccm.mydom.com/SMS_DP_SMSSIG$/pri00002"/><ADSite Name="CSSG-Mount-Laurel"/><IPSubnets><IPSubnet Address="10.72.117.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>mysccm.mydom.com</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="0"/><Locality>LOCAL</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="pri00002" FullPackageVersion="2" FullPackageHash="03CFD97C8FB5F7E7E9F177FD6D30D6F25ED106E517E69B715695A0E81DB1D9AF"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30388855;1262113920" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Found local location 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Discovered 1 local DP locations. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Got 401 challenge Retrying with Windows Auth... ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
PROPFIND 'http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to correctly receive a WEBDAV HTTP request.. (StatusCode at WinHttpQueryHeaders: 401) ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Failed to check url http://mysccm.mydom.com/SMS_DP_SMSPKG$/pri00002. Error 0x80004005 ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
GET 'HTTP://mysccm.mydom.com/CCM_Client/ccmsetup.cab' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
C:\Windows\ccmsetup\ccmsetup.cab is Microsoft trusted. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully extracted manifest file C:\Windows\ccmsetup\ccmsetup.xml from file C:\Windows\ccmsetup\ccmsetup.cab. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Loading manifest file: C:\Windows\ccmsetup\ccmsetup.xml ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Successfully loaded ccmsetup manifest file. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Checking if manifest version '5.00.7958.1000' is newer than the ccmsetup version '5.0.7958.1000' ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Running from temp downloaded folder or manifest is not newer than ccmsetup. ccmsetup 11/4/2014 12:14:55 PM 4816 (0x12D0)
Adding file 'HTTP://mysccm.mydom.com:80/CCM_Client/x64/client.msi' to BITS job, saving as 'C:\Windows\ccmsetup\client.msi'. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Starting BITS download for client deployment files. ccmsetup 11/4/2014 12:14:56 PM 4816 (0x12D0)
Successfully completed BITS download for client deployment files. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Successfully downloaded client files via BITS. ccmsetup 11/4/2014 12:14:57 PM 4816 (0x12D0)
Validated file 'C:\Windows\ccmsetup\client.msi' hash 'A5732CE24F2B1545E9FBA458971E0A5504093E0F743CA9E8BD9C047582902878' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Retrieved client version '5.00.7958.1000' and minimum assignable site version '5.00.7845.1000' from client package ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Checking compatibility of site version '5.00.7958.1000', expect newer than '5.00.7845.1000' ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
Site version '5.00.7958.1000' is compatible. Client deployment will continue. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
An MP exists on this machine. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
The client version 5.00.7958.1000 does not match the MP version 5.00.7711.0000. The client will not be installed. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
A Fallback Status Point has not been specified. Message with STATEID='318' will not be sent. ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
InstallFromManifest failed 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 4816 (0x12D0)
CcmSetup failed with error code 0x80004005 ccmsetup 11/4/2014 12:14:58 PM 3680 (0x0E60)Why two primary that is 'coz geographically based server support and workstation. You can think it as a data center to data center split.
That doesn't make sense and aren't valid reasons for 2012 (not that you can necessarily change it now).
This line jumps out at me in the log file though: "An MP exists on this machine".
That looks like the system you are installing on previously had an MP on it. I would delete the ccm namespace in WMI, cleanup all reference to ccm and Configuratin Manager from the registry, and then try again.
Jason | http://blog.configmgrftw.com | @jasonsandys -
I am working with Firefox 30. I get a certificate error on each webpage I go to. I have reset and uninstalled the browser to no luck. I have also did the following:
Open a new Firefox window, and type this into the address/URL:
about:config
- You'll probably see a warning that changing the config can be dangerous. Click the button to accept the warning and proceed, but BE CAREFUL from here on!
- A table will appear showing various Firefox settings ("Preference Names") and their current values.
- In the Filter box type: broswer.xul
- There should now be a shorter list of settings, including one named browser.xul.error_pages.expert_bad_cert with a value of false.
- Right-click on browser.xul.error_pages.expert_bad_cert and select Toggle. The value will change to true.
- Exit completely from Firefox (i.e. close all windows), and then restart it.
This has not worked either. Does anyone have any other thoughts?Any idea why you are getting these errors?
If you expand the technical details section of the error page, there should be some kind of explanation or code there. Can you copy/paste that into a reply?
If it says something along the lines of "sec_error_unknown_issuer" this can indicate one of these situations:
(1) Incomplete security software installation
Some security suites include a feature to intercept and scan your web traffic, including secure connections. In order to do this, they must present a fake certificate to Firefox, which of course, Firefox rejects. Programs such as ESET and Kaspersky provide a way to either turn off this feature, or import a master certificate into Firefox so that Firefox will trust these programs.
Does that sound relevant?
(2) Malware
Unfortunately, some malware also will intercept your secure connections. Often they can do this invisibly in IE and Chrome because they can inject certificates into the shared Windows certificate store. Because Firefox uses its own certificate file, you may get errors in Firefox that you do not get in IE and Chrome.
To distinguish these, it's helpful to inspect the "Issued by" section of one of the certificates from a site that works in IE but not Firefox.
When you get the error page in Firefox, you can expand the "I understand the risks" section, and click the button to Add Exception. You don't need to actually save an exception to inspect the certificate, so you can cancel after viewing the certificate.
Check the "Issued by" section to see what you find there. For example:
* Name associated with your security software, such as ESET, BitDefender, Kaspersky, etc.
* Sendori (indicates unwanted software from Sendori)
* FiddlerRoot (indicates unwanted software named similarly to BrowserSafeguard, BrowserSafe, SafeGuard)
* Something else
What do you see? -
Good day,
I am currently working on a SSIS package that had been built by a previous user. That Package allows me to import data from an excel source to a SQL table. The excel sheet holds multiple columns, However I am having difficulty with one
column when running the package.
The column rows hold a character and an integer (eg: N2). The data types are as follows:
SQL – varchar(3),NULL
SSIS - double-precision float [DT_R8]
I then inserted a data conversion task to change the data type. The task holds the following properties:
Input column – F6
Output Alias – Copy of F6
Data Type – string[DT_STR]
Length – 50
When I execute the package I receive the following error:”
[Excel Source Data [76]] Error: There was an error with output column "F6" (91) on output "Excel Source Output" (85). The column status returned was: "The value could not be converted because
of a potential loss of data.".
I do know that usually the message "The value could not be converted because of a potential loss of data." refers to a data type or length problem.
Further insight to this problem will be much appreciated.Hi Zahid01,
From the error message you post, we can infer the issue is caused by the input column “F6” cannot convert to the output column in Excel Source.
Based on my test, I can reproduce the issue in my environment. The exactly cause is the data type of input column “F6” cannot convert to the data type of corresponding output column. For example, the data type of input column “F6” is [DT_STR], the data type
of corresponding output column is [DT_I4], and there are some nonnumeric values in the input column “F6”. When we execute the task, the error occurs. We can verify the issue in the Advanced Editor dialog box of Excel Source. The following screenshot is for
your reference:
To avoid this issue, please make sure the input column can convert to the output column in Excel Source, including all the values in the input column.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
I cannot change the value in about:newtab from "newtab" to "blank." The dialog is displayed but when I click Ok, the value is not changed.
===Answer===
Comment on usual method and solution, by a forum Moderator.
As long as there are no confounding factors, such as certain extensions, or a user.jsfile the procedure is as follows
# Open a new tab and type "about:config" in the address bar.
# In the Search bar type: "newtab"
# Locate and double click "browser.newtab.url"
# In the "Enter String Value" box change "'''about:newtab'''" to "'''about:blank'''" and click OK.
# Verify that the value has changed and now all new tabs will be blank.
See post under by ''pirate048'' [/questions/976589?page=2#answer-509482] ~J99Have to say that I rather agree with Mark..all we want is a simple, unadorned clean page that doe not track and show usage!! WHY NOT!! Is it too simple for developers..we aren't all (nor do we want to be!) software experts! Come on Mozilla..tidy up and clean up..it might be a quicker programme too!!
-
i have purchased itunes match but the cloud will not load on my ipad 4.it works on my iphone 5 & it originally worked on my ipad.the only music that will show up is stuff that i bought from the itunes store.any ideas on how to get this to work?
On the MBP, in iTunes, switch to Song view and enable the iCloud Status column by pulling down View > View options and selecting the option for "iCloud Status." Close the small window. Look for any tracks that have a status of "waiting." If you see several of them disable iTunes Match while holding down the Option key. Quit iTunes, wait a few seconds, then open it again and turn iTM back on. Let it compelete the scan. Wait until all tracks that are "waiting" have a status of either "matched" or "uploaded."
On the iPad, turn off iTunes Match then launch the Music app and let the contents clear out. Power cycle the iPad for good measure, then re-enable the service once all the tracks in iTunes have been processed. -
This is especially annoying if you have hot corners for LaunchPad and accidentally open it with a full screen app open, because the Dock will not leave! Try it: open any app in full screen, open LaunchPad with a gesture or hot corner, exit out of LaunchPad and the Dock will be at the bottom of the full-screen app, obscuring the bottow 10% or so of the screen. Any fixes, or something to come on Apple's end?
below is what I get with the dev.jeffersonscher.com etc. url. But what do I do with this information? I can launch safe mode, but I still get only the 2" icon/window of Firefox.
JavaScript Browser Tests
navigator object properties
navigator.userAgent = Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
navigator.appName = Microsoft Internet Explorer
navigator.appCodeName = Mozilla
navigator.appVersion = 5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C)
navigator.platform = Win32
DOM methods/collections
if(document.getElementById) = true
if(document.layers) = false
if(document.all) = true
window properties
if(top.window.moveTo) = true
if(top.window.moveTo(0,0)) =
The following data is reported by a server running Microsoft IIS server and ASP:
View selected http headers at <a href="svrvars.asp">svrvars.asp</a> -
i am trying to install msnbc app from the app store and keep getting an error message. The app will not install. What can i do?
This is asked and answered many times each day. The forum search bar is on the right side of this page.
Disable your firewall/security software and try again. -
Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event> -
How can I stop the 'Adobe Reader Update' from constantly trying to download? It's been over a week now, preventing me from signing out of my computer and other issues too. Can you help please? thanks!
Hi! The version is OS X 10 8 5...not sure what that means lol but it makes a difference obviously!
I did what you said now and it has worked, thanks so very much for getting back to me. I really appreciate your help!!
Can I ask you questions in the future or do I just do that through the forum?\
Thanks again, Jennie
From: Anubha Goel <[email protected]>
To: rubyrose1950 <[email protected]>
Sent: Sunday, April 26, 2015 10:42 PM
Subject: You have been mentioned by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community
|
You have been mentioned
by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community - View Anubha Goel's reference to you Hey rubyrose1950, Could you please let me know what version of OS are you working on.You might try uninstalling Reader and install it again from the below mentioned link:Adobe Acrobat Reader DC Install for all versions Let me know how it goes. Regards,Anubha
Participate in the conversation by replying to this email
To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. | -
When visiting sites that play videos using flash, I am able to start the videos playing, but then am unable to interact with options such as fullscreen and pause. I am not encountering this problem in safari/chrome.
When starting videos to play in fullscreen, the mouse will not autohide as it will on other browsers.Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.
Maybe you are looking for
-
Problem facing while creating DataSource through visual admin utility
Hi, I have created my database on shw6ur-3\tdemand_1 machine where shw6ur-3 is machine name and tdemand_1 is database instance. Still now we used to create database on the sqlserver machine without databaseinstance . This is first time we have instal
-
Hi There is a requirement to just pay only 50 documents that are due. Therefore, how can we limit the payment documents? In the field selection tab of F110, there is not much space to enter 50 docs. Is there any other way? Thanks & Regards NW
-
How do I redownload two songs I just purchased a little while ago? They didn't save right because I was low on memory. Am I screwed for 3 months for these two songs?
-
Time Machine Restore individual files after reformatting
Is it possible to restore individual files to my G5 iMac after i reinstall/reformat OSX on it?......i dont want a full restore The time machine is currently backing up this G5 iMac
-
RETURN DELIVERY TO VENDOR WITH SERIAL NO
we have consumables like example tyres we are following serial no after result recoring any quanity is rejected i want to post return to vendor when i am traing in usage decision system show the error message Movement type 124 does not currentl