Disabled remove icon of collaboators in Auction Template

Hi Sourcing Guru!
I duplicated an Auction Template and tried to remove some collaborators from it.
However, remove icon for each of them is disabled. Therefore, I could not remove them.
Do you know why remove icon was disabled? And How do I remove some of collaborators from Auction Template ?
Thank you in advance.

Hi Vikram,
We are using release 5.1.10.
I understand that the new Auction Template reflects the change.
But this is not what I want to do.
My original question is that is if we can enable remove icon for collaborators when I duplicated the existing template.
Obviously the duplicated one inherited collaborator attribute from the existing one. And it has disabled remove icon too.
The reason we tried to do instead of creating new one is that the existing template already includes all necessary information. Therefore, we do not want to lose them except collaborators.
Is there any way we can do this?
Thanks a lot.

Similar Messages

How to disable/remove unwanted language templates in ISE 1.1.1

We're using ISE's Sponsor/Guest Portal function.
We customized the english default lanuage template.
But we do not want to translate/customize all default language templates.
How can I disable/remove the unwanted templates? (The delete button is disabled for them)
Otherwise our users would be able to select templates that are not customized.

Lots of other ISE users also looking for the same.
An enhancement request has been filed on this:
CSCuc02562 ISE could allow sponsors to specify language templates in sponsor portal
Symptom:
ISE does not provide a mechanism for a sponsor and/or admin to specify which language templates appear under the "Language Template for Email/SMS Notifications" drop-down when creating a guest. This means that all language templates appear in that drop-down, even unnecessary ones. Eg: Chinese templates might not be needed in Germany, and other way round. This makes the drop-down unnecessarily loaded and unpractical to use.
If the list of language templates grows further with custom templates, the drop-down becomes unpractical.
Conditions:
Try to specify useful templates for guests in the sponsor portal
Workaround:
None
As of now, you can statically assign a language template to a portal instead of relying on browser locale. Under the configuration of the portal, in the Customisation tab, you can force the language template to whatever language you need, by unticking "Use browser locale".
Customizing the Sponsor Portal
http://www.cisco.com/en/US/docs/security/ise/1.1/sponsor_guide/ise_sponsor_chp1.html#wp1069407
hope it helps.
Jatin Katyal
- Do rate helpful posts -

Removing icons from menu bar in webi

Hi Bo gurus,
I have a user , user donot want to see track,filter,drill,scenario icons in right side top of the webi report,Is there any way to achive this.
Any suggestions would be appreiciated.
Regards,
Mahesh

hi,
I am not sure whether we can completely hide these icons from the user.
But there is a workaround to disable these icons.
CMC > Applications > Web Intelligence > Your Group > Assign Security > Advanced > Add/Remove Rights > Application > Web Intelligence
Deny the following
- Data Tracking: Enable for users
- Data Tracking: Enable format display changes by users
- Enable drill mode
Regards,
Vamsee

? Best way to remove the notification area "Safely Remove" icon?

I have a new T500 running Vista64. I've been able to customize it mostly to my liking. But I still have a notification area icon called "Safely Remove Hardware." When I click on it a window pops up allowing me to "safely remove" the Ma*shi*ta DVD drive. I will never remove this hardware.
There are pretty clear methods that disable this icon and seemingly work perfectly for nVidia installations of serial ATA drives, but this T500/Vista64 setup doesn't have those drivers or the registry key that is modified. I am aware that I can customize the notification area to "hide inactive icons" (via Taskbar properties) but there is only this one icon and it does not serve a purpose. I am certain that there is a benign way to remove the icon that does not involve other software (like RemoveSRHI) and only removes the icon as it pertains to the "removable" Ma*shi*ta DVD drive. Any temporary hardware, like a flash drive, that needs this will still display the icon. The nVidia setups simply add a registry fix to HKLM\System\CurrentControlSet\Services\nvata by adding a DWord "DisableRemovable." I've read from quite a few successful users of this registry fix and there doesn't seem to be a downside.
Does someone that knows a lot more about these drivers know if the DisableRemovable DWord can be added to a different key that's in my setup so the icon isn't displayed? I'm guessing there are thousands of T500 users that would thank you! Many Thanks, Ben

I remember having this happen on my Toshiba, and since I never safely removed anything, I hid it.
Since you're still wanting to use it to remove USB drives, etc. I found a dandy program, it allows you to hide devices you don't want to stop. I've never used it, but the domain said it all for me: http://www.safelyremove.com/
Hope it works for you, it did for someone else in a forum I visted via some Googling.
Currently Just passed the CompTIA A+ 601 with flying colours! =D
Owner of an SL500 running Vista Business with 4GB of PC2 6400 RAM

How can I remove icons from the Finder sidebar? Were transferred when I set up laptop from my desktop computer. Tried dragging off but that didn't work.

How can I remove icons from the Finder sidebar? Transferred info from my Mac Pro desktop computer (using target mode) and there were folder icons on the Mac Pro Finder sidebar that are now on the MacBook Finder sidebar, even though these folders do not exist on the MacBook. Tried to drag them off, which is the usual way to get rid of folders that the user adds to the sidebar (as opposed to those that can be added via the Customize Toolbar dropdown menu) but was unsuccessful. I then unchecked all of the Customize Toolbar menu items and the folder icons still remained. What else can I do?

Did you hold the Command (Apple) key while dragging them off the sidebar? That usually makes them go *poof*.

Not able to find userChrome.css file for customizing the Firefox browser. I just installed 20.0.1 firefox browser. Want to disable/remove navigation bar.Pls Hlp

Not able to find userChrome.css file for customizing the Firefox browser. I just installed 20.0.1 Firefox browser version.
I want to disable/remove navigation bar from the browser window, making the browser to work like kiosk mode.
Please Help,
Thanks,
Vishal.

hello,
here is the complete path ..
''C:\Documents and Settings\XXXXXXX\Application Data\Mozilla\Firefox\Profiles\chrome"
Let me know
Thanks,
Vishal.

I can't remove icons from the dock, they don't move at all when I try to drag and drop them off the dock

I can't remove icons from the dock, they don't move at all when I try to drag and drop them off the dock any help out there?

Restart and see if that solves your issue.

How do i remove icons from iphone

how do i remove icons from my iphone. i decided i do not want the app so i paused it. now i want to remove it.

If you want to remove an app, press and hold on any app until they 'wiggle'. You will see a small 'x' by each one you can remove. Tap the 'x' and it will be removed. When done, press the home key.

How do I stop/disable/remove dovecot and postfix?

Hello,
So the story is somehow I managed to install Lion Server on my personal computer from the App Store. Fine until I realized all the proccesses my computer is spending resources on now. I've looked through what I think is every guide in the book on how to "remove" Lion Server, meaning just disable the additional servers it installs. I think I've gotten almost all of it, following basic things such as shutting everything "off" in Server.app.
Seems that though, no matter what Launch daemons or agents I disable, two are persistent on starting up with my comptuer and I can't seem to rid myself of them. Yes, I need to stop/disable/remove them. The following shows up in Console.app > All Messages:
Dovecot (or something related):
1/24/12 10:57:58.490 PM dovecot: lda: Error: userdb lookup: connect(/var/run/dovecot/auth-userdb) failed: No such file or directory
1/24/12 10:57:58.491 PM dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information.
Postfix:
1/24/12 10:57:58.105 PM postfix/master: master exit time has arrived
1/24/12 10:57:58.143 PM postfix/master: daemon started -- version 2.8.4, configuration /etc/postfix
1/24/12 10:57:58.160 PM postfix/qmgr: 127555F00C2C: from=<>, size=6804, nrcpt=1 (queue active)
1/24/12 10:57:58.508 PM postfix/pipe: 127555F00C2C: to=<[email protected]>, relay=dovecot, delay=2877, delays=2876/0.03/0/0.31, dsn=4.3.0, status=deferred (temporary failure)
I believe both of these are related to mail somehow. I have ticked off "Mail" switch box in Server.app.
These messages keep on looping in the Console since I'm assuming they are crashing and then restarting due to a "stay alive" in some plist file I can't seem to find...
Please, I would be very grateful to anyone who can help me unclutter my Console of these messages. I know I can filter senders, but I will like to see if I might get some advice to resolve this. I'm sure it's minimal, but it can't be good for battery life. I wish I had the time to do a fresh install of the client.
Cheers!
Ryan

I have the exact same problem, and I'd appreciate a response. My logs are flooded by nonsense!

Af:query component added field not removed when remove icon is clicked

I have an af:query component on a popup dialog. In advanced mode when I add a field, the new field appears in the searchRegion followed by a red X remove icon. If I subsequently click that remove icon, the query refreshes, the red icon is gone, but the newly added field still remains. The query component is linked to a standard VO query executable in the bindings. There is no custom processing of the value, model, queryListener or the queryOperationListener. In all other respects the query component works fine. The only problem is a newly added field not being removed when the remove icon is clicked. Here's how the component is setup (an added wrinkle is that the query component is hosted in a Declarative Component, so that makes this code a little harder to decipher).
Does anyone know where I should start looking for this? Hopefully I don't have to implement my own queryOperationListener.
JDev version is Build JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923
--- snippet from the page fragment ------
<af:popup id="frmsLstPU" contentDelivery="lazyUncached">
<af:dialog id="d1" type="ok"
styleClass="AFStretchWidth" resize="on"
stretchChildren="first" contentWidth="840"
contentHeight="480"
title="#{UnifiedResourceBundle['FORMSLIST.DIALOG.TITLE']}">
<idmkr_adf:Correspondence_Formslist_Query idmkr_query_model="#{bindings.FormVOFlatQueryCriteriaQuery}"
idmkr_table_binding="#{viewScope.FormsListBacking}"
idmkr_table_model="#{bindings.FormVOFlatQuery1}"
idmkr_bindings="#{bindings}"
idmkr_resourcebundle="#{preferences}"
idmkr_printStreamBean="#{viewScope.FormsList}"
id="cf1">
</idmkr_adf:Correspondence_Formslist_Query>
</af:dialog>
</af:popup>
-- snippet from the Correspondence_Formslist_Query declarative component ------
<af:query id="qryId1"
headerText="#{UnifiedResourceBundle['FORMSLIST.QUERY.SEARCH.TEXT']}"
disclosed="true"
value="#{attrs.idmkr_query_model.queryDescriptor}"
model="#{attrs.idmkr_query_model.queryModel}"
queryListener="#{attrs.idmkr_query_model.processQuery}"
queryOperationListener="#{attrs.idmkr_query_model.processQueryOperation}"
resultComponentId="::resId1" displayMode="default"
styleClass="AFStretchWidth"
rows="4" maxColumns="2"/>

I have changed the contentDelivery from "lazyUncached" to "immediate" and the same problem occurs. Thank your for your suggestion.

Creating an icon box with a website template

Hey fellow dreamweavers,
I want to add a social media icon set(facebook,twitter,etc,) in the corner of my website, the thing is i am using a premade template that didn't come with one how can i create a box to add the icons.
thanks,
vx

Open your main Template.dwt and add one. Save it and populate changes to child pages.
For more precise instructions, we need to see your Template HTML and CSS code. The best way is to upload Template and supporting files to your server and post the URL here.
Nancy O.

Where to find to red eye removal icon?

on the left tool bar, there is no red eye removal icon. I did tried to click on the Spot Healing Brush tool , but still doesn't has red eye removal icon in it.

You should get a flyout menu with 4 options:

Word program disabled. Icon still in place. How do I get it back?

My Word app is disabled, but icon in place and not in Trash. How do I get it to function again?

Message from app folder and dock icon are identical. "Microsoft Word cannot be opened because of a problem."
App and system are compatible as all was well until two days ago. At that time I had a message to check Trash and found nothing relevant. Since then repeated messages as above. Should I reinstall Microsoft Office mac 2011? Both Excell and Power Point are opening as usual. I do not use either, am heavily invested in Word.
Thanks for you help.

Remove icons on Awesome 3 statusbar?

I've been looking at tons of config files, but I can't seem to figure out how to remove icons on the statusbar (next to application names). Can anyone help?
Thanks!
Last edited by Yes (2008-11-11 00:43:36)

If you're using the 3.1-rc1 version or git then I think that this isn't possible because the code creating the tasklist object
tmp_tasklist = awful.widget.tasklist.new( some_function )
creates the tasklist with icons and a label and you can't pass it a parameter to tell it what you want. It would be pretty easy to change it but I didn't get to do it yet. If you want to change it you'd have to change the code in /usr/share/awesome/lib/awful/widget.lua and in there the function tasklist.new(...) (if your awesome installation is installed to /usr).

How to disable save Icon?

We have a legal requirement in our bank that in our intranet site whatever document we show it should have save icon disabled? [thought there are lot if ways we can capture the contents of it even with save icon disabled]
Is there any way of implementing the save icon disabled...I spent almost three hours with no result.... My coding will look like this
int permissions = ~(PdfWriter.AllowPrinting | PdfWriter.AllowCopy | PdfWriter.AllowModifyAnnotations | PdfWriter.AllowFillIn | PdfWriter.AllowAssembly | PdfWriter.AllowModifyContents | PdfWriter.AllowScreenReaders);
PdfEncryptor.encrypt(reader,fos,true,"","",permissions);

I have pasted my code below
We are creating a new pdf and applying permissions for that....
I searched for more than two hours and couldn't find a way to disable save icon in the API we use
com.lowagie.text.pdf.PdfEncryptor;
com.lowagie.text.pdf.PdfReader;
com.lowagie.text.pdf.PdfWriter; [you can paste this in google which will explain this API]
I thought this as a constraint with this API, hence searching for other API's which has this feature...in most of the forums I saw implementing this as not possible....hence thought of checking in Adobe forum where people might suggest some other API...Please let me know whether this feature [if it is really a programmable feature] is available in API's you have used...Thanks Aandi Inston!
byte[] documentBytes = document.getContentBytes(); //which will get the content of a pdf
File newFile = File.createTempFile("tempPdfFile", ".tmp");
FileOutputStream fos = new FileOutputStream(newFile);
reader = new PdfReader(documentBytes);
int permissions = ~(PdfWriter.AllowPrinting | PdfWriter.AllowCopy | PdfWriter.AllowModifyAnnotations | PdfWriter.AllowFillIn | PdfWriter.AllowAssembly | PdfWriter.AllowModifyContents | PdfWriter.AllowScreenReaders);
PdfEncryptor.encrypt(reader,fos,true,"","",permissions);

Disabled remove icon of collaboators in Auction Template

Similar Messages

Maybe you are looking for