Disabled USB port

Recently, upon starting up my 2008 MacBook Pro, I received a message that said one of my USB ports (the right hand one) was disabled for using too much power. The message also said once whatever device was removed from the port (odd, because I think there never was a device attached to the right-hand port in the first place), it would re-enable the port.
However, it hasn't. Any idea how I can resuscitate this USB port? Because of this, I can no longer sync my iPod because using it with my USB music drive and a USB hub is too stressful for the computer.

Hi
the port has stayed disabled, even after another restart?
reset PRAM & the SMC ? (just in case...)
You've run the apple hardware test, ?

Similar Messages

  • What do you use to block/disable USB ports and CD/DVD drives?

    I have been tasked with finding software that can disable USB ports not being used for keyboards & mica and CD/DVD devices.  At a previous job we used Sophos Enterprise console and it had that ability.  I currently use VIPRE Business Premium but I don't see where their products have the same capability.  So, what do you gals and guys use?  
    This topic first appeared in the Spiceworks Community

    Most business leaders are always looking for new ways to put money back into their budgets. This is particularly true of small and midsize businesses, which have smaller budgets to begin with. For these companies, the prospect of saving on IT equipment can be especially attractive.Buying previously owned IT equipment can be a great way to achieve the savings that so many businesses are looking for, but it’s important that you take the time to learn exactly what you’re getting before you make such an investment. The terms “used” and “refurbished” are commonly used to describe previously owned IT equipment, but the two are not interchangeable. If you want to make sure the great deal you’re getting is really as great as you think it is, it’s important that you learn what the two terms mean, and how they’re different.Used Vs. RefurbishedTo...

  • IPod Touch drawing too much power--disabling USB ports

    Hi there,
    I have a brand new Macbook, just picked it up less than a week ago. I've been hooking up my 2nd gen iPod touch to it for a while without any problems, but suddenly I started to get an error message every time I plug it into my USB port:
    "*Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled.* To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may also have been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
    I've been looking all over the internet for a solution to this and I can't find a thing--it's really frustrating since this laptop's brand new and I have no other way of charging my iPod.
    My laptop is plugged in while I'm doing this. The error message is instant--it seems to pop up before I've even inserted the USB cable all the way. Also, for what it's worth, I just did a test and I get the error message just by plugging the USB in, even if it's completely unattached to anything.
    Thanks, looking forward to a solution.
    Message was edited by: stenzelwa
    Message was edited by: stenzelwa

    Had the same where as soon as i Plug my iPhone into the USB Port on my 2009 "Macbook Pro"
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled. To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may also have been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."
    (This is a Simple Fix)
    Just Change the USB Cable.
    I Just Happened to have a New USB/iPod/iPhone Cable Laying Around, so i Connected it and "Voila" everything was back to Normal.

  • MacBook(2009) disables USB ports!

    I use a cooling pad for my 2009 macbook. All of a sudden now when I plug it in to my USB port it tells me the USB port is drawing too much power and it disabled it. (btw: I have it charging and it's at 99%)

    The built in USB ports can only supply a limited amount of power. Try to draw any more than that and the Macbook protects itself by turning the ports off.
    The way around this problem is to use a self powered USB hub.
    You plug the hub into a wall outlet for power, and connect it to the Macbook with a USB cable for data. All your USB devices can now be plugged into the hub, and whatever power they need will be supplied by the hub not the Mac.
    Examples of powered USB hubs:
    http://usb-hub-review.toptenreviews.com

  • DMP 4310G Disable USB ports

    We have a couple of hundred DMPs in our network right now. Our internal security team did an audit and is requested that I disable the USB ports on the back of these devices.   Does anyone know if this is possible through the GUI or any other way?
    firmware version - v5.4
    all are the same hardware - DMPs-4310G-54-K9     
    Thanks,
    cj            

    CJ,
    Try the following:
    https://admin:pw@dmp-ip:7777/set_param?mng.command=write+sh+FG+umount
    Cheers!
    T.

  • Uevent disables USB-ports

    Good Evening,
    since kernel 2.6.39, an uevent disables my usb ports:
    Kernel Log output
    Oct 18 09:01:04 hades kernel: [ 1.436484] irq 16: nobody cared (try booting with the "irqpoll" option)
    Oct 18 09:01:04 hades kernel: [ 1.436486] Pid: 0, comm: swapper Not tainted 3.0-ARCH #1
    Oct 18 09:01:04 hades kernel: [ 1.436487] Call Trace:
    Oct 18 09:01:04 hades kernel: [ 1.436488] <IRQ> [<ffffffff810c147a>] __report_bad_irq+0x3a/0xd0
    Oct 18 09:01:04 hades kernel: [ 1.436495] [<ffffffff810c1896>] note_interrupt+0x136/0x1f0
    Oct 18 09:01:04 hades kernel: [ 1.436497] [<ffffffff810bf989>] handle_irq_event_percpu+0xc9/0x2a0
    Oct 18 09:01:04 hades kernel: [ 1.436499] [<ffffffff810bfba5>] handle_irq_event+0x45/0x70
    Oct 18 09:01:04 hades kernel: [ 1.436501] [<ffffffff810c21c7>] handle_fasteoi_irq+0x57/0xd0
    Oct 18 09:01:04 hades kernel: [ 1.436503] [<ffffffff8100d9f2>] handle_irq+0x22/0x40
    Oct 18 09:01:04 hades kernel: [ 1.436506] [<ffffffff813f66ea>] do_IRQ+0x5a/0xe0
    Oct 18 09:01:04 hades kernel: [ 1.436508] [<ffffffff813f43d3>] common_interrupt+0x13/0x13
    Oct 18 09:01:04 hades kernel: [ 1.436509] <EOI> [<ffffffff81273d7b>] ? intel_idle+0xcb/0x120
    Oct 18 09:01:04 hades kernel: [ 1.436513] [<ffffffff81273d5d>] ? intel_idle+0xad/0x120
    Oct 18 09:01:04 hades kernel: [ 1.436516] [<ffffffff81313e3d>] cpuidle_idle_call+0x9d/0x350
    Oct 18 09:01:04 hades kernel: [ 1.436519] [<ffffffff8100a21a>] cpu_idle+0xba/0x100
    Oct 18 09:01:04 hades kernel: [ 1.436521] [<ffffffff813d1f52>] rest_init+0x96/0xa4
    Oct 18 09:01:04 hades kernel: [ 1.436523] [<ffffffff81748c23>] start_kernel+0x3de/0x3eb
    Oct 18 09:01:04 hades kernel: [ 1.436525] [<ffffffff81748347>] x86_64_start_reservations+0x132/0x136
    Oct 18 09:01:04 hades kernel: [ 1.436527] [<ffffffff81748140>] ? early_idt_handlers+0x140/0x140
    Oct 18 09:01:04 hades kernel: [ 1.436529] [<ffffffff8174844d>] x86_64_start_kernel+0x102/0x111
    Oct 18 09:01:04 hades kernel: [ 1.436530] handlers:
    Oct 18 09:01:04 hades kernel: [ 1.436533] [<ffffffffa00064f0>] usb_hcd_irq
    Oct 18 09:01:04 hades kernel: [ 1.436534] Disabling IRQ #16
    Later disabling IRQ #16 again:
    Oct 18 09:01:04 hades kernel: [ 15.963949] irq 16: nobody cared (try booting with the "irqpoll" option)
    Oct 18 09:01:04 hades kernel: [ 15.963955] Pid: 0, comm: swapper Tainted: G C 3.0-ARCH #1
    Oct 18 09:01:04 hades kernel: [ 15.963957] Call Trace:
    Oct 18 09:01:04 hades kernel: [ 15.963959] <IRQ> [<ffffffff810c147a>] __report_bad_irq+0x3a/0xd0
    Oct 18 09:01:04 hades kernel: [ 15.963975] [<ffffffff810c1896>] note_interrupt+0x136/0x1f0
    Oct 18 09:01:04 hades kernel: [ 15.963977] [<ffffffff810bf989>] handle_irq_event_percpu+0xc9/0x2a0
    Oct 18 09:01:04 hades kernel: [ 15.963979] [<ffffffff810bfba5>] handle_irq_event+0x45/0x70
    Oct 18 09:01:04 hades kernel: [ 15.963981] [<ffffffff810c21c7>] handle_fasteoi_irq+0x57/0xd0
    Oct 18 09:01:04 hades kernel: [ 15.963984] [<ffffffff8100d9f2>] handle_irq+0x22/0x40
    Oct 18 09:01:04 hades kernel: [ 15.963986] [<ffffffff813f66ea>] do_IRQ+0x5a/0xe0
    Oct 18 09:01:04 hades kernel: [ 15.963988] [<ffffffff813f43d3>] common_interrupt+0x13/0x13
    Oct 18 09:01:04 hades kernel: [ 15.963989] <EOI> [<ffffffff81273d7b>] ? intel_idle+0xcb/0x120
    Oct 18 09:01:04 hades kernel: [ 15.963994] [<ffffffff81273d5d>] ? intel_idle+0xad/0x120
    Oct 18 09:01:04 hades kernel: [ 15.963997] [<ffffffff81313e3d>] cpuidle_idle_call+0x9d/0x350
    Oct 18 09:01:04 hades kernel: [ 15.964000] [<ffffffff8100a21a>] cpu_idle+0xba/0x100
    Oct 18 09:01:04 hades kernel: [ 15.964002] [<ffffffff813d1f52>] rest_init+0x96/0xa4
    Oct 18 09:01:04 hades kernel: [ 15.964004] [<ffffffff81748c23>] start_kernel+0x3de/0x3eb
    Oct 18 09:01:04 hades kernel: [ 15.964006] [<ffffffff81748347>] x86_64_start_reservations+0x132/0x136
    Oct 18 09:01:04 hades kernel: [ 15.964008] [<ffffffff81748140>] ? early_idt_handlers+0x140/0x140
    Oct 18 09:01:04 hades kernel: [ 15.964009] [<ffffffff8174844d>] x86_64_start_kernel+0x102/0x111
    Oct 18 09:01:04 hades kernel: [ 15.964010] handlers:
    Oct 18 09:01:04 hades kernel: [ 15.964016] [<ffffffffa00064f0>] usb_hcd_irq
    Oct 18 09:01:04 hades kernel: [ 15.964018] [<ffffffffa02a4220>] mei_interrupt_quick_handler threaded [<ffffffffa02a4570>] mei_interrupt_thread_handler
    Oct 18 09:01:04 hades kernel: [ 15.964021] Disabling IRQ #16
    Several output information:
    lspci:
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    /proc/interrupts:
    CPU0 CPU1 CPU2 CPU3
    16: 1687314878 0 0 0 IO-APIC-fasteoi ehci_hcd:usb1, mei
    Kernel Log mei info:
    Oct 18 09:01:04 hades kernel: [ 15.464667] mei: module is from the staging directory, the quality is unknown, you have been warned.
    Oct 18 09:01:04 hades kernel: [ 15.464922] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    Oct 18 09:01:04 hades kernel: [ 15.464928] mei 0000:00:16.0: setting latency timer to 64
    Kernel Log ehci info:
    Oct 18 09:01:04 hades kernel: [ 0.999944] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    Oct 18 09:01:04 hades kernel: [ 0.999964] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    Oct 18 09:01:04 hades kernel: [ 0.999966] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    Oct 18 09:01:04 hades kernel: [ 0.999971] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    Oct 18 09:01:04 hades kernel: [ 0.999996] ehci_hcd 0000:00:1d.0: debug port 2
    Oct 18 09:01:04 hades kernel: [ 1.003885] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    Oct 18 09:01:04 hades kernel: [ 1.003897] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf0426800
    Oct 18 09:01:04 hades kernel: [ 1.016476] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    Module Info:
    mei:
    filename: /lib/modules/3.0-ARCH/kernel/drivers/staging/mei/mei.ko.gz
    version: 7.1.20.1
    description: Intel(R) Management Engine Interface
    author: Intel Corporation
    srcversion: 0A1192D3177950D60ACC4F4
    staging: Y
    vermagic: 3.0-ARCH SMP preempt mod_unload
    parm: watchdog_timeout:Intel(R) AMT Watchdog timeout value in seconds. (default=120, disable=0) (ushort)
    ehci_hcd:
    filename: /lib/modules/3.0-ARCH/kernel/drivers/usb/host/ehci-hcd.ko.gz
    author: David Brownell
    description: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    alias: pci:v*d*sv*sd*bc0Csc03i20*
    depends: usbcore
    vermagic: 3.0-ARCH SMP preempt mod_unload
    parm: log2_irq_thresh:log2 IRQ latency, 1-64 microframes (int)
    parm: park:park setting; 1-3 back-to-back async packets (uint)
    parm: ignore_oc:ignore bogus hardware overcurrent indications (bool)
    parm: hird:host initiated resume duration, +1 for each 75us
    I'm using the DP67BG mainboard from intel.
    Please let me know, if you need additional information.
    Greetings,
    kinky
    Edit:
    Forgot to mention that I already tried following kernel parameters (acpi=routeirq, noirqdebug, pci=msi, irqpoll, irqfixup) of which only noirqdebug worked (as to say that IRQ #16 was not disables, so my keyboard did work), but which caused a decrease in graphics performance (low fps rates (shells refresh slowly), tearing).
    Last edited by kinky (2011-11-07 20:44:48)

    ok, there are only 2 devices using IRQ 16
    00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
    there are many reports about intel chipset systems having the same problem after kernel 2.6.38 / 2.6.39 .
    you basically have 2 options :
    1. If you want to have all usb ports available:
    test with the LTS kernel 2.6.32.48, verify it doesn't have those problems (99% sure)
    stick to LTS-kernel atleast until the problem is solved in the mainline kernel
    2. Disable / don't use the problem ports.
    your system has multiple USB controllers :
    00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI])
    00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI])
    03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI])
    test which / how many ports do work
    If there are not enough usb ports working, your system has several pci express slots.
    you could consider purchasing a pci express extension card with usb ports.
    While it may use the same driver, it will get a different irq.

  • Is it possible to disable USB ports on iMac?

    I've got a pair of 27" iMacs which will be utilized as Flash Pro workstations by employees and subcontracted illustrators and animators. In the interests of security, specifically -- protecting my intellectual property (animated content), I'm interested in setting up these iMacs such that nobody can copy any files they're working on to an external hard drive, or upload the file as an attachment to a webmail account or to an external server.
    It is my understanding that I can set up a standard account and via network preferences, disable the wireless, ethernet, and firewire functions, which could then only be reactivated by an admin account password. But it would appear there is no way to disable the USB ports. Is such a thing possible? Is there a way to disable the USB ports on an iMac or any Mac?
    In the event there is no way to disable the USB ports, is there a way to prevent someone from copying files on this iMac to external hard drives or uploading files to webmail programs or servers offsite?
    How do employers prevent employees and subcontractors from copying or sending intellectual property offsite?

    Per Eric Ross's link above, it would appear that one can use Workgroup Manager from the Server Admin Tools, to manage user accounts even on a Standalone Computer -- not running on a network or utilizing the OSX Server Software -- as seen in the following statement from Eric's link:
    MacInTouch Reader
    "...   As an additition to Espen Koht's contribution, it should be mentioned that the 'Workgroup Manager' is part of the 'Server Admin Tools', which are distributed free of charge by Apple. Media access whether USB or Firewire for all users can be configured 'standalone' on each Mac computer by the user "Administrator"- it works!"
    So I installed the Server Admin tools. According to the Workgroup Manager Help document, there appear to be two steps required to make the tools operational. First -- Setting Up an Administrator Computer and second -- Create a Directory Administrator Account. The Workgroup Manager Help document does not clearly explain how to configure a standalone computer for Workgroup Manager.
    When I open the Workgroup Manager or Server Admin apps, I am presented with a window containing three fields that must be filled in. One is Address. The second is User Name. The third is Password. How do I determine the address? Do they mean IP address? What do I enter in the address field?
    Regarding the Name and Password fields, do I enter the name and password of my admin account for this computer?... or use a completely different name and password?
    Again the objective is to enable more comprehensive management and restrictions of Standard User accounts utilizing Workgroup Manager on a standalone computer.

  • How do I reset or enable a disabled usb port on a macbook air 10.7.2

    Ok, tried installing a thumb drive and a message says "too much power is being drawn, usb is disabled..."  Does anyone know how to reset or enable a disabled usb on a MBA?  Thanks

    Reset PRAM & SMC several times with no luck.  Took it to the apple store and did a diagnostic...pass, but USB still does not work.  Genius says, USB hardware will need to be replaced...FREE (under warrantee).  It would have been $280 for labor and parts replacement.  Should be ready in 5-7 days.  Lessons learned, don't buy cheap USB thumb drive.

  • No usb ports work, can't instal usb 3 driver

    I received an HP Elitebook 8540w laptop from work, the hardrive was wiped with just the OS installed (windows 7 pro 64bit). I downloaded and installed all applicable drivers from here.  Everything seems to work except the usb ports.  There are three usb 2.0  ports on the left and two usb 3.0 ports on the right.  None of them will recognize devices installed in them.  My usb optical mouse's laser will flash for a second when it's plugged in and my external drive (1TB Passport) will spin up but never shows in nMy Computer as a accessible drive. Device Manager shows 2 Generic USB Hubs, 2 Standard Enhanced PCI to USB Host Controllers, and 2 USB Root Hubs.  Comparing this to my other Elitebook 8540w it is missing a Renesa USB 3.0 Host Controller Hub.  THis was one of the drivers installed with the others above but it's not showing anywhere.  I've since removed and reinstalled this driver several times with no changes. Runing the USB 3.0 Host Controller Uitility that installs with this driver gives a "USB 3.0 Host Controller not found error." Please help!

    Hi, Please check your IT deparment, they may disable USB ports elsewhere. My working laptops (all of them) have same "problem", my IT department even disabled C: drive, optical drive I can't see them anywhere. I can't see Devive Manager. I can only use USB ports to charge my phone or tablet. Regards.

  • I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

    Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

  • HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

    Hi
    does anyone know how to fix the message on my iMac:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    This is a brand new machine and did not have anything attached to the USB ports"
    Thanks for any help

    If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

  • I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled

    I keep getting error 3004 when i try restoring and updateing my iphone 4 to iOS 7 i did everything 1. flushed dns 2. edited hosts 3. updated itunes and downloaded new one 4. switched usb ports 5. disabled antivirus 6. enabled ports 80 and 443 7. disabled firewall 8. even tryed putting mobile in DFU mode to restore it not of this worked so please help me

    please replyyy i'm stuck on this like whole week

  • How can I disable my USB port?

    I need to temporarly disable my USB ports on my powerbook.

    For what reason ever..
    IF this is possible then I would take a deep look at the developer tools. Inside the /Developer/Applications folder is a USB device tool ( designed to develop and test USB drivers/software ) .
    Only other way would be geeky hacking on the open firmware prompt, but I don't know the aliases or command that would be needed. You will however need to digg very deep inside the technical side of a Macintosh and get an understanding how OF and the Hardware Abstraction layer in OS X works and maybe unload manually some critical kernel extensions on boot-time.
    Good Luck.

  • Imac usb ports disabled and nothing is connected

    iMac 27inch Late 2007 USB Ports Disabled Again!
    Has happened before and took forever to fix it. Nothing specific fixed it last time and nothing I know was the direct cause. Each time different OS, different location, different year, different cables etc etc.
    Now, reset everything, moved everything, changed everything - still nothing. No USB ports work. iMac still has pop up "USB devices disabled..."
    Taking into Apple unless someone can tell me what 10 pages of google hasn't - what a bloody stress and waste of time!

    Disconnect all peripherals from your computer.
    Resetting your Mac's PRAM and NVRAM

  • My USB ports get disabled on my iMac when in sleep mode

    I can't seem to figure this out. When waking from sleep mode, all my USB ports are disabled. I first noticed it when the USB speakers stopped working, but none of the ports work, to the printer, or to the scanner. The only way to reactivate the ports is to do a restart. I did a virus scan of my entire HD but it found nothing. I have not installed any new software recently so I'm stumped. I'm hoping this isn't a hardware issue.

    Sometimes, a computer has a problem remapping your USB devices after sleep. Disconnect all of your USB devices: printers, mice, scanners, everything. Wait a minute. Reinsert the devices. This resets your USB map.

Maybe you are looking for