Disabled WiFi with no Mac address and bluetooth is off!

i have a iphone 3GS bought model is MC131TH and tried to upgrade it so many times (now its 4.0.1) with no solution the wifi is disabled and when checking the about there is no wi-fi address and it say N/A. bluetooth address is there but i can not enable it knowing that the phone is simfree
please adv what to do i tried every thing, i even tried returning it to geneva store but they said its bought from Thailand so i must go there and return it!

Howdy TrumpetCharlie,
We've an article that can help get your WiFi working normally again.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Cheers,
Allen

Similar Messages

  • Is there any way to locate an iPad with a MAC Address and a Serial Number?

    I happen to know the MAC Address for my recently stolen iPad.  Is there any way to use that to locate an IP address the next time it accesses the web?

    Not really. Other software would have to be installed on the device to locate it. That's what Find My iPhone is for (and it's free).
    File a report with your local police.

  • ISE 1.2 disable endpoints with certain mac address

    Hi All,
    We have an AD to authenticate for wireless users. In AD, we have specified to block the user if the password is entered wrongly for more than 3 times. The problem is some of them are using other user ID and locking the accounts. I have gotten the MAC address of the user. Can anyone please advise how to block the request from this MAC from even reaching the AD.
    Thanks

    You have two options from ISE and one option from the WLC:
    The first option which is not very scalable is to modify your authentication policy to deny access to an specific MAC address(Radius:Calling station ID). But this is not very scalable as you can only specify one MAC address.
    Your second option is to enable the anomalous client suppression(under systems->settings->protocols->RADIUS). This will be your best option but it would require a bit of testing to identify what are the best values for your environment.
    From the controller you can enable the excessive 802.1x authentication failures. By default it won't even send the fourth authentication to ISE for a failing endpoint:

  • How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    How do I sort out 'Apple ID disabled for security reasons' after I had my old Email address and password erased but still showing ?? now I can't access my apple store Apps updates with new email address and password??

    You might try contacting App Store Support: http://www.apple.com/support/mac/app-store/

  • Reports for Apple devices with SCCM client - Mac Addresses and IP information.

    Greetings.
    I've been having an interesting problem.
    I am currently running SCCM 2012R2 with PKI and have clients installed on windows, linux (ubuntu mostly) and apple computers successfully.
    I have created custom report proving me with hardware information for windows and linux machines (Serial numbers, manufacturer, Mac Addresses and IP addresses) successfully.
    So far I wasn't able to create any report or even find what table information about Apple computers MAC and IP addresses is stored.
    If i go to Apple computer in SCCM using resource explorer under hardware I can see network devices, so that information is definitely gathered by SCCM in some way.
    Can anyone help me out with this and maybe I am doing this in a wrong way?

    Nice. Only trouble there seems to be multiple entry for same mac address there for same resource id.
    So when I try to get them as substring i get multiple copies of same mac address.
    But looks like this will work as solution to this problem.
    So far I was doing it this way (And i am sure there is clearer way to do it.)
    SUBSTRING((SELECT ',' + CAST(t2.MACAddress0 AS VARCHAR(40))
                FROM (SELECT DISTINCT ResourceID, MACAddress0 FROM  v_GS_NETWORK_ADAPTER) t2
                WHERE t2.ResourceID = ResourceID
                ORDER BY t2.ResourceID, t2.MACAddress0
                FOR XML PATH ('')
            ), 2, 100) [MACAddresses]

  • IMEI number, wifi address and bluetooth missing

    IMEI number, wifi address and bluetooth missing. is there any way we can fix this?

    See if http://support.apple.com/kb/TS1559 helps.

  • Computer names persistently associated with a MAC address causing problems

    Our WDS server will assign out a computer name like CompanyName###  This is great.
    The problem is sometimes WDS will assign a computer name that is getting associated with the MAC address somehow--I assume this is what's happening--and kick a computer off the domain that now has that computer name. 
    Is there some way I can disable the association of computer names with MAC addresses, or persistent computer names?

    Hi,
    How did you define your naming policy in WDS or in your answer file?
    3.1.1.4 Machine Naming Policy
    http://msdn.microsoft.com/en-us/library/dd871418.aspx
    Please also check this hotfix:
    Windows Deployment Services generates duplicate client computer names when the %MAC variable is used
    http://support.microsoft.com/kb/957051
    Hope this helps.

  • I never had an APPLE ID with this email address and I have no idea why this is this showing to me?

    Every time I restore my iPhone from iCloud Backup, this apple id SHOWS UP  and asking password. But I never had an APPLE ID with this email address and I have no idea why this is this showing to me? Could anyone help me to remove it from my Applr ID as it seems somehow its linked to my iCloud Backup. Thank you.
    <Email Edited By Host>

    Hi Ralph,
    I have received the iPhone 5s from my carrier EE UK. I never had a second hand device as all my previous iPhones received from my carrier. Every time I restore from iCloud backup, first I enter my Apple ID and Password, then it authenticates and goes through next process and updates iCloud settings, right after initial settings then it displayes enter your password where the Apple ID is the metntioned Apple ID and in the bottom it says "Skip this to go next process" or something. I have to press that everytime to skip it, then restore my backup from iCloud and then when I'm in iPhone home it asks me for the password of that mentoned email. So everytime I change the email address to my Apple ID then enter my password that activates my iCloud services and start downloading all the apps I installed.
    Its really weird to be honest and I don't know how to remove that email address from that process and seems its there.
    N.B. When I had iPhone 4s, Apple Store did replace my iPhone 4s with a new one due to the faulty WiFi.

  • When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

    When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer.  The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem?  My printer does not have on-board Wi-Fi but, otherwise, works fine.  I shouldn't have to buy a new one.  Is there a OS patch out there that would open the printer port for my PC computers?

    I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected?  That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
    How is your network configured?  Bonjour as a protocol will NOT cross a router boundary.  If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
    You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router.  If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation.  The additional routers must be put into bridge mode, which is done differently depending on the router.  But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
    Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

  • TS4062 I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  Whats wro

    I'm trying to sync my ipad over wifi, with my MAC, I have the updated software on my MAC, the ipad is up to dat 6.1.2.  I can follow all of the steps, but I can't find a SUMMARY button on the toolbar, nor do I receive the option to sync.  What am I doing wrong or what should I look for?  Thank You

    To sync your iPad over Wifi:
    First ensure you're running iTunes 11.0.2. And you already have your iPad up to date, good.
    Plug your iPad into the Mac via USB. Click your iPad in the top toolbar (under the search bar). Click the Summary tab if it isn't already selected. Check the box to "Sync with this iPad over Wi-Fi" (you may have to scroll down to see it). And now click the Apply button at the bottom right.
    You should be able to unplug your iPad from the Mac and it should still remain in iTunes. (If not, try Quitting and relaunching iTunes and waiting, restarting iPad, etc).
    To initiate a sync over Wifi, click your iPad in the toolbar in iTunes then click Sync. Or on your iPad, go to Settings > General > iTunes Wifi Sync and tap "Sync Now."
    If this didn't solve your problem, please let me know with a more detailed explanation of what you're experiencing so I can try to help you get up and syncing wirelessly!

  • Mac address and device name

    Hello,
    Not sure how to explain my requirement, but I will try: How can I broadcast my computer name along with the MAC address? In other words, I have a Netgear WNDR3700 router and when I login to see the "attached devices" I only see the assigned IP and MAC for all our MacBooks. The router page shows other devices (printers, shared hard drives) but I want to identify my Mac also by name and not guess/investigate who's MacBook is.
    Maybe the pic can help.
    Thanks!

    Does the device name match up at all with the MAC address? Since you blocked out the MAC address I can't see it but everything after the BRW in the device name looks like a MAC address. Could be the BRW stands for Broardcom something Wireless. Which IIRC Mac's use a Boardcom chip for both Wireless and Wired Ethernet.

  • Time Machine stopped working with new Mac address.

    Greetings,
    I have an IOMEGA 500, FireWire which I used to use for Time Machine. I now have a new Mac address and do not have access to the old Mac address. Is there any way that I can get the IOMEGA to start working with Time Machine? If so please give me step by steps instructions on how to make this external hard drive work again with Time Machine.
    Any help is most appreciated.
    Thank you for your attention to this matter.

    macuserr222 wrote:
    Greetings,
    I have an IOMEGA 500, FireWire which I used to use for Time Machine. I now have a new Mac address
    Do you have a new Mac, or a new logic board? Either will get you a new MAC (Media Access Control) address, which Time Machine interprets as a different Mac.
    Do you mean you haven't started doing backups of the new Mac, and want to view the old ones? If so, see #E2 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum).
    If you want to use the old backups to set up a new Mac, see [Setting up a new Mac from an old one or its backups|http://web.me.com/pondini/AppleTips/Setup.html] (or use the link in *User Tips* at the top of this forum).
    When you do your first backup, OSX should ask how you want to handle the old backups. See #B5 in Troubleshooting for details.
    If that's not what you mean, please explain exactly what's going on, and what happens when you try to do whatever you're doing.
    Message was edited by: Pondini

  • I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?

    I updated my iPhone 4S weeks ago and today it said I needed to update it again, so I did. Now when I send iMessage it comes up with my email address and not my number. How do I fix this?

    The Snow Leopard 10.6 DVD should still be available from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 or 10.8 is part of the 10.6.6 update.
    If they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
    http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0

  • MAC address and router access control

    My iPhone 3GS can only access the network (through my Netgear KWGR614 wireless router) when the router's MAC address access control is off. When I turn it on the phone is blocked. The MAC address I use is taken from the iPhone settings. It begins with 64. All other MAC addresses I have ever seen begins with 00. Is this MAC address correct? If it is right, could it be that the router can't handle this address?

    The first 3 bytes of the mac address identifies the manufacturer. For example, mine starts with 04:1e:64 which is Apple
    04-1E-64 (hex) Apple, Inc
    041E64 (base 16) Apple, Inc
    1 Infinite Loop
    Cupertino CA 95014
    UNITED STATES
    . if it starts with 64 then it belongs to
    64-4F-74 (hex) LENUS Co., Ltd.
    644F74 (base 16) LENUS Co., Ltd.
    18-5 Gwacheon-Dong
    Gwacheon Gyeonggi-Do 427-060
    KOREA, REPUBLIC OF
    check this list : http://standards.ieee.org/regauth/oui/index.shtml
    enter your first 3 numbers (first 3 pairs) from your wifi (settings/general/about) (don't use colons in the search)
    Not sure about the router as I never tried mac filtering. Each router will behave differently.
    Hope this helps.

  • Synching desktop Address Book with my .Mac Address Book. Is it possible?

    Can i sync my desktop address book with my .Mac address book?
    Thanks.

    I am also having this problem with my address book synching to .Mac. But my calendar and bookmarks have appeared with no problem so I'm not doing anything wrong -and I haven't created custom profiles either. Do you really think this is due to the lead up to Mobile Me? If so, why did the bookmarks etc sync with no problem? It is frustrating because this is what I really need to access.

Maybe you are looking for