Disabling A2DP function on Nokia N95

Does anyone have any ideas how i am able to disable the A2DP function on a Nokia N95?
I am having problems pairing my parrot handsfree kit with my ipod and my phone at the same time or is there some other way to stop my phone pulling the 2 audio channels on my handsfree kit??

Turn BT off.
640K Should be enough for everybody
El_Loco Nokia Video Blog

Similar Messages

NOKIA N95 NOT COMPATIBLE WITH CK20 (A2DP)

Hi,
I just bought my new Nokia N95 and I would like to buy a Nokia Car kit that allow me to enable all the features of the N95 so I thought to buy the CK-20W but in the Nokia table of compatibility says that is not compatible with Music with Bluetooth connection (A2DP), I read that Nokia N95 has Bluetooth profile (A2DP) so why doesn’t it work with the CK-20W Music Connection?
Nokia N95
Firmware V 11.0.026

it does

Problem sync iCal with Nokia N95

I´m trying to set up iSync to synchronize my iCal (MobileMe calendars) with Nokia N95 8 Gb.
Contacts is synchronizing fine but when I try to click the check-box to define which calendars I want to sync I get this message:
"Before you can synchronize your calendars, you need to open a calendar application that supports synchronization and create at least one writable calendar."
How can I create a writable calendar in iCal???
..gob...

Excellent!
Thanks Julian. I had no idea there were functions hidden behind that icon. So simple now you've shown me.
Thanks very much for your help.

Wlan problem with nokia n95 8g RM-320

i have nokia n95 8g RM-320 frimware 35.0.00.1
wlan stopped working
and i did a lot of things but nothing happened
1- format phone memory
2- reinstall software many times
3- restore factory settings
4- restore beackup without settings
the problem is
some times the phone can find the wlan and sometimes not
and if it find the wlan it cant connect to the connection
ps. nothing wrong with my access point because i tried another phone and it worked fine
plz i need help i really need this function to work again

plz help !!

Converting Nokia N95 video for editing in Final Cut Pro?

I have some .mpeg4 videos shot with a Nokia N95 mobile phone that I want to edit in Final Cut Pro.
I read everywhere that .mpeg4 is not an "editing format".
I want to use Quicktime Pro (or Mpeg Streamclip) to convert the footage to something I can use in FCP *without degrading the original quality* but I am completely lost as to what settings I should use.
Can anyone point me in the right direction? I have done some test conversions but a side by side comparison in Quicktime of the original and converted footage showed the latter to be softer, less contrasty and with different colours. Not at all what I wanted.
I've posted this question on th eFCP and iMovie forums but haven't had any definitive replies. Is this really so complicated?
Thanks in advance!

I've been using iMovie 09 with these files but because the image quality is pretty poor I need the image correction functions of FCP. I can import the .mpeg4 files to FCP OK and work with them but I seem to spend all my time rendering. This is why I began to wonder if my initial file format and sequence settings were what they should be (and I am completely lost here).
The edited film will be uploaded to blip.tv and then embedded in websites. My concern is not to degrade the quality during my workflow.

LoadVars not working on Nokia N95 (US)

Hi there,
Each time my FL 2.0 standalone app tries to connect to a
remote server, the application quits after I selest the WLAN
connection to use for the connection from the system dialog. Below
is the code in question. Running on the Device Central emulator
works fine. Anyone else run into this issue?
(Note, I've also tried this with Nokia's tutorial app:
http://www.bysamir.fr/flashlite/nokiadev/Latest_Nokia_Devices.zip
- same problem)
Sequence:
1. Launch SWF as standalone app
2. Enter text in textField within app
3. Call loadVars function
4. System dialog appears asking which WLAN connection to use
5. Select Access Point (AP) in system dialog
6. Application quits! ??
NOTE: I can connect to the AP normally using the web browser
on the phone, so I know the connection works.
var myListener:Object = new Object();
myListener.onKeyDown = function() {
if (Key.getCode() == ExtendedKey.SOFT1) {
// Handle left soft keypress event.
sendText(inputField.text);
} else if (Key.getCode() == ExtendedKey.SOFT2) {
// Handle right soft keypress event.
fscommand2("Quit");
Key.addListener(myListener);
function sendText(myText) {
responseField.text = "sending msg";
var rvars:LoadVars = new LoadVars();
rvars.onLoad = function(success:Boolean) {
if (success) {
responseField.text=this.msg;
} else {
responseField.text = "Failed!";
var svars:LoadVars = new LoadVars();
svars.inputMsg = inputField.text;
svars.sendAndLoad(myURL,rvars,"GET");
Device: Nokia N95-3 (US Edition)

Using Sony Ericsson k800i with itunes non-drm tracks and they are playing without any problems. Used itunes agent application to sync phone memory card with itunes smart playlist (filter for "purchased"). Great that I can now use purchased itunes tracks on my ipod and phone!
Maybe the N95 only supports aac up to a certain bit rate? Or check the file format (m4a?).

Software update NOKIA N95 8Gb

Trying to update my NOKIA N95 8G with Nokia OVI suite because Nokia PC suite doesn;t offer software update anymore. Getting the well known error : 12017 . I looked up forums and saw all kind of solutions , turning off Internet Connection Sharing ( ICS ) i checked on my XP sp3 in Computer Management > Services ... no ICS there. ok! I tried another solution , installed Beta Nokia Updater... but that software founds no UPDATE! OK! my last wish is to RESOFT at least my phone... is that possible ? I dont need a update ... only re-soft!
Please , anyone can try helping me ?
Thank you.
Attachments:
untitled.JPG ‏42 KB

having the exact same problem with my e71. running Vista Sp2. updated to new PC Suite/NSU, it recognizes my phone but then fails once it tries to update firmware to 300.21.012.
i've seen a variety of solutions online and none have worked. among them:
restarting computer
restarting phone
selecting "general" profile (or "normal" on e71)
turn off Internet Connection Sharing
run NSU in Compatibility Mode
turn off Aero Glass
make IE default browser
disable antivirus software
disable firewall
disable Offline Mode in IE
quit all other running apps
shut down all Nokia apps, plug in phone, THEN start NSU
that's all i can remember. anyway, none of it has worked. also saw a post that maybe Nokia's servers are just down.
any thoughts?

Nokia n95 8GB Web: No Gateway Reply problem please...

helllooo..
i have a nokia n95 8gb. it was working perfectly till yesterday and all of a suddent i cannot access the internet via wifi.. in my home other phones which is another nokia n95 8gb, b.bery bold 9700, and nokia n97 were able to connect to the internet via wifi.
i tried everything. disabling the power saving. changing the ipv4 restarting the fone and every possible thing. the only thing which is left is resetting the router and setting it up again..
what suggestions would you guys give me.thanks

Your company provides an internet or intranet connection? Did you try other hotspots?
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Nokia N95 GPS Navigation

Dear All,
I am James and recently bought a Nokia N95. It comes with GPS Navigation but not sure how it works. Looked in the user manual but still not idea of how to work it. I have played around with it and downloaded Google Maps but find it difficult to get a reception.
I want to know how to download maps onto it, what connection is needed and how it actually works?
Any ideas?
regards
James

14-Jan-2008 02:20 PM
niallward wrote:
Hi,
I'm just back from the US were i used the GPS a good bit. like most GPS's, Navigation on the N95 told me to turn right then left on on straight roads with intersections (watch out for this, always look at the map before turning as you'll see that the route line is straight on screen), sent me down bizarre side roads, never went the same route to a place as it did going back (very strange), but other that that was very handy.
The one major bug I'd like to report is in v20 of the firmware (can't say for others versions), despite disabling network communication in the settings, the phone would still startup my GPRS data pack connection while roaming. Even when I set it to use Wi-Fi, it still made a connection over GPRS. I work out it cost me about a €10 in unnecessary data charges. Easy test to see if you get the same problem: Startup Maps and say no to data usage, exit or Press Menu, Tools, Log. You should see that a Data pack connection was initiated at the same time you started the Maps App. The only way around this I found was to set the phone to offline mode. But you might as well buy a proper GPS if this is the only solution.
Good luck!
I had exactly the same problem. Once activated, network mode could not be turned off and it cost me around $50 in a day and a half.
As soon as I tried to shut it down in Maps>Options, it either shut down maps or rebooted my phone.
Keep network support off, is my recommendation.
To cure the problem, I had to reload my firmware and software...everything but settings. If you reload settings, you reload the problem.
I spend hours today doing just that. Settings are probably the least important part of my phone history so it wasn't too big of a deal and the effort was totally worth it to save me mega cash while using maps.

Death of Nokia N95

After 6 months of joyous use, with occassional disappointments as it doesn't support latest flash player, my favourite Nokia N95 suddenly mimicking "clinical death".
It doesn't respond to turning on power excepting a feeble glow which is non-functional.
May I get any advice!

I suggest you take it to your local Nokia Service Centre and take it in for repair, 6 months is way too short for a mobile phone to last that much.
www.nokia.co.uk/repairMessage Edited by 6280 on 01-Dec-200706:28 PM
Nokia N95
V 20.0.015
0546553

UPGRADATON OF NOKIA N95--version 30.0.015 updating...

I HAVE NOKIA N95 WITH THE SOFTWARE VERSION 20.0.015 AND I WANT TO UPGRADEMY PHONE WITH THE VERSION NOW AVAILABLE 30.0.015. I HAVE PC SUITE AND I HAVE ALSO DOWNLOADED SOFTWARE UPDATER. BUT I AM NOT ABLE TO UPGRADE THE HAND SET.
PLEASE SUGGEST WHAT TO DO.

I have checked it through the phone code and it replies as below.
"Latest available software for Nokia N95, product code 0548986
Version: 20.0.015"
but when I check it from the latest version available for Nokia N95, nokia site says that the new version v30 has already been released on 29.09.2008. Given as below.
"Nokia N95 software version 30.0.015 released - 29 September 2008
The new software version 30.0.015 for your Nokia N95 takes your device's features and functions to the next level. To help you find your way, it features faster and better maps complete with satellite images and traffic information. The new integrated Google search provides instant answers on the go, while the automatic screen rotation function helps you stay oriented, whatever you do. Additionally, you can enjoy endless entertainment with full N-Gage gaming capability and a wide variety of games available via the Download! application. To see if this latest release is available for your device, click here. To get the full benefits of the new Maps 2.0, upgrade your map data with the Nokia Map Loader."
now please let me know what should I do to get the latest software for my mobile i.e.Nokia N 95.
Regards

Nokia N95 Versus Nokia N91: Sound Quality, which a...

Hi all, i am one of afortunatelly person who have one Nokia N95 and i like really all functions that it have, i think that Nokia N95 Sound better to Earphones than Nokia N91.
what do you think?

30-Jul-200711:40 PM
el_loco wrote:
No, there is nothing that can be done to improve the audio quality of N95 further.
N91 wins hands down using the 3.5mm port.
But with that LCG Jukebox you can have more deep bass sound.(A little more)

Who can solve iSync problem with Nokia N95? (I use the Nokia plug already)

Hello
Since I bought my new cool Mac:, I sync my N95 with iSync and the Nokia N95 plug-in. Thinking at first that is works flawlessly (as other members here seem to think as well) I later found out, that if I make changes to any calendar or "to do" description! on either the N95 or the Mac it syncs, but only up until a certain number of characters. If I exceed this number, the description on the phone will simply be cut off - in the iCal it still fully appears though.
Rather surprising, since when syncing with a PC via the Nokia PC suite there is no such an issue. All my often lengthy descriptions are fully put on the phone. And if I sync back there are no problems either. So I guess it has to do with the iSync protocol or this Nokia N95 iSync plug-in? Any ideas, solutions...? Any help greatly appreciated!
A bit in despair
Zuckermann

The flex cable is damaged. Some years back when I had a Nokia N95 8GB the flex cable was damaged and for a few days the screen was showing strange colours at the display and eventually the screen became black. I went to a local repair shop and I replaced the flex cable and what I noticed was that the flex cable that it had no proximity sensor on it so I told the technician to remove the proximity sensor on the original one and replace it with the new flex cable. Another thing I discovered was that after fitting the flex cable and returning the cover the front camera was not in its usual position so the technician had to do some modifications to get it back to its normal position and after a few months it was damaged and this time I went to Nokia Care Centre and replaced the flex cable for a small fee and what I noticed was that the flex cable that I previously bought was a fake cable. The one bought from Nokia Care Centre had its proximity sensor and when the cover was returned the camera was in its exact position the same as it was with the original flex cable. What I wanted to say is that please beware of fake flex cables on the market and I suggest that you buy it from an authorised Nokia Dealer.
Ngwangwa - Six Million Ways To Die Choose One

Can not use TOUCH function on Nokia 6600 slide

Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of order

As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

New Firmware Update for Nokia N95 (RM-159 ) :Decem...

Hello All,
It looks like new firmware update is available for Nokia N95 basic model .
Earlier Version of Firmware was : 30.0.015
Now the latest available Firmware was : 31.0.014
When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
I will wait for 2 more days for official communication from Nokia....

Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
Somebody should shine a light on this FW, or nokia has
done a lot of work for nothing!

Disabling A2DP function on Nokia N95

Similar Messages

Maybe you are looking for