Disabling button still the button works !!!???

Hi,
I'm either disabling a button by Screen Painter or by code and yet the button is still functional however it is greyed out and seems to be disabled to me visually.
Any ideas ?
SAP 8.81 PL08

Thanks so much. You are right. But I don't understand why apex does that? Because I has specified some java script in element tab of a hidde item.
But later I noticed that element tab itself is gone.
Changing item type broght the tab back and I could see my java script.
But its misleading. I thought my code is gone.
Thanks,

Similar Messages

  • After entering the Wlan password I can't use the „connect" button. The button is deactivated. Did somebody have a solution? I have an iPad 3 with IOS 8.0.2.

    After entering the Wlan password I can’t use the „connect“ button. The button is
    deactivated. Did somebody have a solution? I have an iPad 3 with IOS 8.0.2.

    Your iPhone's iOS must be same or newer than the one in backups. In your case it is older so you need to update your iPhone and then recover it with backup.

  • I reset the ipad2 to try to get the keyboard to come up for the notebook app, but the   button still does'nt work???

    I reset the ipad2 to try to get the keyboard to come up in notebook app , but the + button does'nt work to make it appear??

    How did you reset it? Did you reset it using the option that's in the settings app for did you restore it using iTunes? If you reset it using the setting app then navigating to reset, I suggest doing a restore using iTunes do install a clean version of the firmware. Check to see if that works. Happy holidays!

  • How to make an ipod classic get off the apple boot logo when the menu an center button still don't work

    i tryed to connect my ipod classic to my computer an every time i do it will start flikering an when i conected it to a wall plug it just get stuck on the boot logo it had the the red x but i fix that but now its just stuck on the boot logo i need my ipod please tell me what i need to do pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee eeeeeeeee

    The big Red X is a sign of iPod undertaker coming, so you only have temporary extension and put it in Comatose state.
    Some laptops have only one high power USB 2.0 port, so if it flickers, try the others on your laptop.
    However try the following, (bear with me if you have done all these.)
    Toggle the hold switch, make sure you don't see the red marking.
    Press Menu and Center butoons for about 10 secs till the Apple logo comes ON, then release the buttons.
    If the above solve the frozen Apple Logo, then do a Disk Diagnostics, read this earlier post from tt2.
    https://discussions.apple.com/message/17028567#17028567
    Don't worry if yours is Windows, the process apply to the iPod and not the PC.
    Good Luck

  • Started downloading IOS8 24 hrs ago, still down loading now! Tried switching off/on with 2 button still the same. Can anyone advise please. Cheers

    I Want to stop download of iOS 8 and start again

    sorry, thought my question had been posted. I started downloading iOS 8 24 hrs ago, it is still downloading now, have tried off/on with 2 buttons but still the same can anyone advise please cheers

  • In firefox I am unable to submit information via form buttons. The buttons are present and clickable but nothing happens once they are clicked.

    I am having trouble submitting information via form buttons. I click on the button but nothing happens. It isn't site specific and is a problem that has only started to happen recently. I have uninstalled firefox and reinstalled it without any rememdy. The problem does not replicate itself in Chrome or Internet Explorer. Can anyone advise what maybe the problem? Is it s a javascript setting within firefox that I may have accidentally turned off? Please help.

    Thank you for the help but I found the answer here: http://support.mozilla.com/tiki-view_forum_thread.php?locale=en-US&comments_parentId=601699&forumId=1
    I am pretty sure you had the same diagnosis and solution to start it in safe mode, and if it does work, go disabling each extension one by one until you determine which extension is the culprit.
    Thanks!

  • How do you set an access key of a button when the button's content is bound to a string?

    Hello,
    I want a button's context to be "_Edit" when it's in an edit mode and "_Add" when it's not. When I bind the button's content to a string, the access key would not work. So I used two separate buttons to do the work and that seems like
    the right way.
    Just out of curiosity, is there a way to bind the button's content to a string and still make the access key work?
    Thank you for the help.

    In general, if operations are quite different from each other like Add
    and Edit it's completely valid to use two different controls.
    Anyway, you can of course bind the content of a button to a string and add an underscore as a prefix in the setter of the property. That will change the access key according to the content string's first character.
    If altering the bound string is no option in your case you can also use a custom string converter.

  • How to change the background color of a button when the button is emphasized

    Hi,
    I have a button that is in the "emphasized" state, I realized there is a default color "light blue" when the button is emphasized. is there any way I can change this default color? so if mu button goes to emphasized state I can control which color it should be
    I am using "Halo" for the theme, and I was not able to change the Focus color through the "Appearance Window" in Flash Builder 4
    any help would be appreciated

    Take a look at the accentColor flag of <s:Button>. It looks like you can do it there. But, it also looks like emphasized needs to be "true" and that you may need to interrupt the button's automatic update event... I've never tried to do this though. And, I imagine you only need to listen to button state changes if you want to dynamically control the emphasized color. If you just want to set a static value other than the default, it looks like setting emphasized to true and the uint of the accentColor will do the trick...

  • How can I get the container of a button after the button is clicked?

    I have two components:
    public class A extends JPanel implements ActionListener {
        public A() {
        public void actionPerformed(ActionEvent e) {
            String command = e.getActionCommand();
            // here need to know the instance of B to execute it's process()
            // but I can only know the button jb in B via the following code:
            JButton myjb = (JButton)(e.getSource());
    public class B extends JPanel {
        public ContainerInfoInput(ActionListener al) {
            JButton jb = new JButton("OK");
            jb.setActionCommand("B.ok");
            jb.addActionListener(al);
        public process() {
    public class Main {
        A a = new A();
        B b = new B(a);
    }How can I get the instance of B in which the button is clicked?
    Thank you

    I think it's a defect of the listener mechanism. Under the present circumstance, I must do it like the following:
    I must use another class M as a bridge:
    class A {
        public A() { }   
        public processA (String info ){}
    class B{
        public B(ActionListener al) {       
            JButton jb = new JButton("OK");       
            jb.setActionCommand("B.ok");      
            jb.addActionListener(al);  
       public String processB () {    }
    class M implements ActionListener  {
        public M() {
            A a = new A();
            B b = new B(this);
        public void actionPerformed(ActionEvent e) {
            String command = e.getActionCommand();
            if(command.equals("B.ok")) {
                String information =b.processB();
                a.processA(information);
    }Why not just use A to listen B and obtain instance of B through the ActionEvent?
    Anyone know a solution about it?

  • Why doesn't my tab button on the keyboard work since upgrading to FF 16.0?

    Noticed this when trying to move on your website, GMail etc so that I can move from field to field (example: To field in Gmail, hit tab button on keyboard to move to Subject field).
    Tab button non responsive.
    Safari and Chrome still have this ability. Obviously something has occurred as I upgraded today to 16.0 and yet I was fine in 15.x.
    This key is important for speed for daily work. Please advise how I can re-activate it's functionality.
    Thank you.

    See:
    * http://kb.mozillazine.org/accessibility.tabfocus
    Note: In OS X (as of 2005-01), if this preference is not explicitly set, the “Full Keyboard Access” setting in System Preferences will be honored. All builds before that date (e.g., Firefox 1.0.x) will ignore that setting.<br />
    This pref doesn't exist by default, so if you want to use it instead of the system settings then you need to create a new Integer pref with the name accessibility.tabfocus and set the value to what you want (7 is to tab through all the fields).

  • Disable LOV once the button is pressed and submitted

    Hi Friends
    I have an LOV which lists Gold, Silver and Bronze and a button Trigger.
    For each row in the report i can select one value for the LOV and press the Trigger button.
    Once I press the trigger button the LOV filed for that particular row shoyld be freezed or disabled.
    Any way to do this?
    ~Rose

    Hi Varada/Don
    My requirement is exactly like your application, but i confused wit the code. See my code
    SELECT  DISTINCT
            CASE WHEN IVPROVISION_ID = 1 OR
                IVPROVISION_ID = 5 OR
                IVPROVISION_ID = 4 OR
                IVPROVISION_ID = 10
            THEN
                APEX_ITEM.CHECKBOX(1,'#ROWNUM#','onclick=enableButton2()')
            ELSE
                APEX_ITEM.CHECKBOX(1,'#ROWNUM#','DISABLED')
            END "PROVISION FOR IV",
            CASE WHEN ISMPROVISION_ID = 1 OR
                ISMPROVISION_ID = 5 OR
                ISMPROVISION_ID = 4 OR
                IVPROVISION_ID = 10
            THEN
                APEX_ITEM.CHECKBOX(2, '#ROWNUM#', 'onclick=enableButton3()')
            ELSE
                APEX_ITEM.CHECKBOX(2, '#ROWNUM#', 'disabled')
            END "PROVISION FOR ISM",
    DELIVERED_SERVICE_NAME as "Existing DS",
    --APEX_ITEM.HIDDEN(3, EQUIPMENT_ID) || APEX_ITEM.DISPLAY_AND_SAVE(4, DELIVERED_SERVICE_NAME) as "Delivered Service Name"
    APEX_ITEM.HIDDEN(3, EQUIPMENT_ID) || APEX_ITEM.SELECT_LIST_FROM_LOV(4, DELIVERED_SERVICE_NAME,'DSLEVEL_LOV', '', 'NO') as "DS Level"
    FROM PROV_VIEW
    where ((:P0_CLIENT = PROV_VIEW.CUSTOMER_ID)
    AND (:P0_SITE = PROV_VIEW.SITE_ID))I want ti implement it for
    APEX_ITEM.HIDDEN(3, EQUIPMENT_ID) || APEX_ITEM.SELECT_LIST_FROM_LOV(4, DELIVERED_SERVICE_NAME,'DSLEVEL_LOV', '', 'NO') as "DS Level"So how should I modify the code?
    ~Rose
    Edited by: user8742092 on Oct 19, 2009 10:15 PM

  • How do I set up a new button on the button bar?

    I was used to previous versions of A/Works in which you just needed to create a macro. In the latest version, it's not so simple. Could someone let me know, preferably in words of one syllable (lol), the steps to take to set up a button. I want a double underline one, it's so frustrating not having one as I use it all the time.
    Any help gratefully received!
    Thankyou
    Marianne
    Mac Pro   Mac OS X (10.4.9)  

    In the Finder, choose New Finder Window from the File menu, and then locate and click on the item in the sidebar named Applications. Next, open the AppleScript item inside, find the Script Editor application, and double-click it. Copy and paste the following text into it up to the second blank line following:
    tell application "AppleWorks 6"
    set style of selection of document 1 to {class:text style info, on styles:{double underline}}
    end tell
    Press the Command and S keys, choose Application as the File Format, and click Save. Open AppleWorks and click on the AppleWorks menu, followed by scrolling down to Preferences and clicking on Button Bar. Find and push the New button, choose Launch Application from the Action drop-down menu, click Choose, locate the script, and click OK.
    (20382)

  • Video button without the button

    Is it possible to create this and have the motion video clips play similiar to a video button? For example, i have created a main menu in PS and would like to place a picture frame off to the side with various video clips playing. But i do not want this to be a button.
    Can this be done?
    thanks,

    There is a series of screen captures here which might be of help where I used After effects.
    https://vimeo.com/album/214460
    This way you could make the screens and play video on them.  Leave out the  ( + )  in the name of the groups.  Let me know how it works.
    John Rich

  • Establish order that buttons appear in an interactive PDF buttons when the buttons overlap

    I have a button that when you roll over it a map appears and when you click the same button a menu appears. The image and the menu overlap one another. At the moment the image is appearing to over the top of the menu even though is is below it on order when in indesign. Can anyone help please? Can you order the appearance of buttons?

    There are no rollovers in DPS. Are you sure you’re in the right forum?

  • I have an Iphone 4s and the screen cracked but still the phone works great what will be the solution replace or fix it?

    Yesterday my little cousin was playing in the table and he kicked the table leg and made the iphone fall in to the ground. I bought this iphone unlocked on July 2012 and it has Repairs and service coverage active until july 16 of 2013. Last year a friend of mine went to an app store and changed his broken screen iphone 4 for a 4s, ofcourse he had to put some money to make it happen.
    Now I am wondering how much it will cost me to change the screen of mine, or if it worth it to change for a new 4s or a 5.
    Also I am out of the states until Feb 22 and in this country there is a bad reception on the phone calls so its complicated talking to apple support.
    NEED HELP!!!!
    Thanks Mat

    It will be replaced with the exact same model. It is not expensive compared to the full retail price of a new phone (without carrier subsidies).
    If you're eligible for an upgrade from your carrier, now might be a good time to consider upgrading to an iPhone 5, though.

Maybe you are looking for