Disabling data usage on Elipsis Tablet does not turn of Data Usage

Yesterday purchased 3 tablets for my kids. First thing I did when I got home was add home wifi and disable data usage. Ridicoulous but this does not disable data usage. Tablet used 4gb of data before I realized what was going on, all the while connected to home Wifi, like the data connectio took precedence. This is a major flaw of this tablet. Called Customer Service, waiting for a mgr to call back. Unfortunatly waiting on hold for over 45min without getting to tech support but in the end the only way to turn off data apparently (or at least I found) was to put in Airplane mode. This is not right!
Even support forum states this is the way to enable/disable data. I feel dooped!

    I'm sorry you waited so long trying to get through to Tech Support dm805. I know being able to disable Mobile Data is important to keep usage under control. As Ann154 mentioned, you are able to turn off Mobile Data in Settings. You can go to Settings> Data Usage> Select Mobile Data (at top right hand side), and it will turn off.  You can also go to Settings> More> Mobile Networks> Uncheck Data Enabled.
I hope this helps.
Thank you,
VanessaS_VZW
Follow us on Twitter @VZWSupport

Similar Messages

  • Any idea what this errorr means? the data type of the reference does not match the data type of the variable

    I am using Veristand 2014, Scan Engine and EtherCat Custom Device.  I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.  
    I created a new Veristand project
    I added the Scan Engine and EtherCat custom device.
    I changed the IP address and auto-detected my modules
    i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
     So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
    Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
    Any thoughts?
    Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Preparing to synchronize with targets...
    • Querying the active System Definition file from the targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.
    • Start Date: 4/10/2015 11:48 AM
    • Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
    • Preparing to deploy the System Definition to the targets...
    • Compiling the System Definition file...
    • Initializing TCP subsystem...
    • Starting TCP Loops...
    • Connection established with target Controller.
    • Sending reset command to all targets...
    • Preparing to deploy files to the targets...
    • Starting download for target Controller...
    • Opening FTP session to IP 10.12.0.48...
    • Processing Action on Deploy VIs...
    • Setting target scan rate to 10000 (uSec)... Done.
    • Gathering target dependency files...
    • Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
    • Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
    • Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
    • Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
    • Closing FTP session...
    • Files successfully deployed to the targets.
    • Starting deployment group 1...
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details:
    Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    LabVIEW: The data type of the reference does not match the data type of the variable.
    =========================
    NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    • Sending reset command to all targets...
    • Stopping TCP loops.
    Waiting for TCP loops to shut down...
    • TCP loops shut down successfully.
    • Unloading System Definition file...
    • Connection with target Controller has been lost.

    Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef?  I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).  
    Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
    You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671  
    Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
    Kevin W.
    Applications Engineer
    National Instruments

  • My tablet does not turn

    My tablet does not turn
    Hello nearly a year ago bought a tablet lenovo thinkpad 1 with feeding problems, we sent for warranty to bogota, and after nearly a month and returned it worked fine, but do not use very often two days ago I returned to use but not lit, the charger does not get it, that I can do?

    i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

  • Upgrade to Windows 10 by using my notebook as a tablet does not turn the screen

    I realized that after doing my upgrade to Windows 10 by using my notebook as a tablet does not turn the screen  (al realizar mi actualizacion a windows 10 mi laptop ya no gira la pantalla en modo tableta... y es 360 grados.. como lo resuelvo??? gracias!!!

    i have the same problem with my envy x2 13 j002dx. tried reinstalling drivers and windows 10. the auto rotate button is there but doesnt do anything when i toggle it

  • "BP Category 1 does not fit the data in category 2"  "Replies Appreciated"

    Hi Gurus,
    When i am trying to create an "Individual Account" in UI, I am getting the error "BP Category 1 does not fit the data in category 2".
    If i try to create a "group" then it says "BP Category 3 does not fit the data in category 2".
    It allows me to create only "Corporate Account" i..e. Category 2.
    What should i do to create "Individual Account" and "Group". (Category1 & Category 3).
    Individual Account (Category 1) - "BP Category 1 does not fit the data in category 2".
    Corporate Account (Category 2) - Able to create only Corporate Account
    Group (Category 3) - "BP Category 3 does not fit the data in category 2".
    Thanks & Regards
    Rohan

    Hi Rohan,
    Hope this SAP Note : 1232459, Solves your problem.
    You might have created a custom configuration for corporate accounts.
    Unfortunately in case of custom configurations exist, they are selected with higher priority.
    So in this case the configuration for corporate accounts is also shown for individual accounts,
    this causes error.
    In order to solve this problem, create a custom configuration for individual account also,
    i.e for view BP_HEAD/AccountDetails. Object type BP_ACCOUNT and object subtype INDIVIDUAL.
    Please make sure that the custom configuration includes the fields firstname and lastname for
    persons instead of name1 and name2 which are only allowed for corporate accounts.
    I hope the above information resolves your problem.
    Best Regards
    Shiven

  • CRM 2007 IC : error "BP category 2 does not fit the data in category 1"

    Hi Guys,
    When I am trying to save the data on the Bupacreate page it gives the error as follows.
    "BP category 2 does not fit the data in category 1".
    Can anyone suggest what is causing this error to happen and how this error can be corrected.
    thanks & regards
    Sandy

    Hi,
    This error usually occrus when you try to set field in without specifing bptype ie person, group etc. In our scenario we were trying to set field in Person which was not present in group. but since do_prepare_output method is same in both, that feild was getting set for group as well. When we placed restriction this error got removed.
    Best regards
    Pankaj Kumar

  • Error: 'BP category 1 does not fit the data in category 2'

    Hi,
                i have written a program to create a contact person and the code for it is pasted below...when i run this program i get nothing but this message in the status bar 'BP category 1 does not fit the data in category 2'...can someone tell me wht the error means and y it is coming.
    thanks:)
    pushpa
    *table for storing the line by line records in the excel file
    TYPES: BEGIN OF TTAB,
            REC(1000) TYPE C,
           END OF TTAB.
    DATA ITAB TYPE TABLE OF TTAB WITH HEADER LINE.
    *variable for storing the name of the excel file to be uploaded
    DATA UP_FILE TYPE STRING.
    *data to be uploaded
    TYPES: BEGIN OF TDAT,
            FLD1 TYPE BAPIBUS1006_CENTRAL_ORGAN-NAME1,
            FLD2 TYPE BAPIBUS1006_ADDRESS-STREET,
            FLD3 TYPE BAPIBUS1006_ADDRESS-CITY,
            FLD4 TYPE BAPIBUS1006_ADDRESS-REGION,
            FLD5 TYPE BAPIBUS1006_ADDRESS-POSTL_COD1,
            FLD6 TYPE BAPIBUS1006_ADDRESS-COUNTRY,
            FLD7 TYPE BAPIBUS1006_CENTRAL-PARTNEREXTERNAL,
           END OF TDAT.
    DATA IDAT TYPE TABLE OF TDAT WITH HEADER LINE.
    DATA: BUSINESSPARTNER TYPE BAPIBUS1006_HEAD-BPARTNER,
          CENTRALDATA TYPE BAPIBUS1006_CENTRAL,
          ORGANIZATION TYPE BAPIBUS1006_CENTRAL_ORGAN,
          ADDRESS TYPE BAPIBUS1006_ADDRESS,
          BAPIRETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
    PARAMETERS P_FILE TYPE LOCALFILE.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
      CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
        EXPORTING
          STATIC    = 'X'
        CHANGING
          FILE_NAME = P_FILE.
    START-OF-SELECTION.
      UP_FILE = P_FILE.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          FILENAME                = UP_FILE
        TABLES
          DATA_TAB                = ITAB
        EXCEPTIONS
          FILE_OPEN_ERROR         = 1
          FILE_READ_ERROR         = 2
          NO_BATCH                = 3
          GUI_REFUSE_FILETRANSFER = 4
          INVALID_TYPE            = 5
          NO_AUTHORITY            = 6
          UNKNOWN_ERROR           = 7
          BAD_DATA_FORMAT         = 8
          HEADER_NOT_ALLOWED      = 9
          SEPARATOR_NOT_ALLOWED   = 10
          HEADER_TOO_LONG         = 11
          UNKNOWN_DP_ERROR        = 12
          ACCESS_DENIED           = 13
          DP_OUT_OF_MEMORY        = 14
          DISK_FULL               = 15
          DP_TIMEOUT              = 16
          OTHERS                  = 17.
    *writing out the contents of the internal table itab
      LOOP AT ITAB.
        WRITE:/ ITAB-REC.
        CLEAR IDAT.
        SPLIT ITAB-REC AT CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB
                    INTO IDAT-FLD1 IDAT-FLD2 IDAT-FLD3 IDAT-FLD4 IDAT-FLD5 IDAT-FLD6 IDAT-FLD7.
        APPEND IDAT.
      ENDLOOP.
      LOOP AT IDAT.
        MOVE: IDAT-FLD1 TO ORGANIZATION-NAME1,
              IDAT-FLD2 TO ADDRESS-STREET,
              IDAT-FLD3 TO ADDRESS-CITY,
              IDAT-FLD4 TO ADDRESS-REGION,
              IDAT-FLD5 TO ADDRESS-POSTL_COD1,
              IDAT-FLD6 TO ADDRESS-COUNTRY,
              IDAT-FLD7 TO CENTRALDATA-PARTNEREXTERNAL,
              '0001' TO CENTRALDATA-PARTNERTYPE.
        CALL FUNCTION 'BAPI_BUPA_CREATE_FROM_DATA'
          EXPORTING
            PARTNERCATEGORY         = '1'
            CENTRALDATA             = CENTRALDATA
            CENTRALDATAORGANIZATION = ORGANIZATION
            ADDRESSDATA             = ADDRESS
          IMPORTING
            BUSINESSPARTNER         = BUSINESSPARTNER
          TABLES
            RETURN                  = BAPIRETURN.
        IF BAPIRETURN IS NOT INITIAL.
          READ TABLE BAPIRETURN INDEX 1.
          MESSAGE
            ID BAPIRETURN-ID
            TYPE BAPIRETURN-TYPE
            NUMBER BAPIRETURN-NUMBER
            WITH BAPIRETURN-MESSAGE_V1
            BAPIRETURN-MESSAGE_V2
            BAPIRETURN-MESSAGE_V3
            BAPIRETURN-MESSAGE_V4.
          EXIT.
        ENDIF.
        REFRESH BAPIRETURN.
        CLEAR BAPIRETURN.
        CALL FUNCTION 'BAPI_BUPA_ROLE_ADD'
          EXPORTING
          BUSINESSPARTNER = BUSINESSPARTNER
          BUSINESSPARTNERROLE = 'BUP001'
          DIFFERENTIATIONTYPEVALUE =
          TABLES
          RETURN = BAPIRETURN.
        IF BAPIRETURN IS NOT INITIAL.
          READ TABLE BAPIRETURN INDEX 1.
          MESSAGE
            ID BAPIRETURN-ID
            TYPE BAPIRETURN-TYPE
            NUMBER BAPIRETURN-NUMBER
            WITH BAPIRETURN-MESSAGE_V1
            BAPIRETURN-MESSAGE_V2
            BAPIRETURN-MESSAGE_V3
            BAPIRETURN-MESSAGE_V4.
          EXIT.
        ENDIF.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
        WRITE:/ 'Business Partner ID:', BUSINESSPARTNER.
      ENDLOOP.

    Hi Pushpa,
             you can use following code to create relationships using BAPI. In this Business partner is organisatin. contact persion paramenter is person. other information related to relationship details
    CALL FUNCTION 'BAPI_BUPR_CONTP_CREATE'
        EXPORTING
          BUSINESSPARTNER           = SEARCH_PARTNER
          CONTACTPERSON             = CONTACT_SAP
      VALIDFROMDATE             = '00010101'
      VALIDUNTILDATE            = '99991231'
      DEFAULTRELATIONSHIP       =
      ADDRESSGUID               =
          CENTRALDATA             = WA_CENTRAL_DATA
          ADDRESSDATA             = WA_ADDR_DATA
          TABLES
        BAPIADTEL                 = I_TEL_DATA
        BAPIADFAX                 = I_FAX_DATA
      BAPIADTTX                 =
      BAPIADTLX                 =
        BAPIADSMTP                = I_EMAIL_DATA
      BAPIADRML                 =
      BAPIADX400                =
      BAPIADRFC                 =
      BAPIADPRT                 =
      BAPIADSSF                 =
      BAPIADURI                 =
      BAPIADPAG                 =
      BAPIAD_REM                =
      BAPICOMREM                =
         RETURN                    = I_RETURN
    hope this will help you
    Siva

  • DataGrid does not display XML data

    Hello, and thanks for reading this...
    I am having a problem displaying XMLList data in a DataGrid.
    The data is coming from a Tree control, which is receiving it
    from a database using HTTPService.
    The data is a list of "Job Orders" from a MySQL database,
    being formatted as XML by a PHP page.
    If it would be helpful to see the actual XML, a sample is
    here:
    http://www.anaheimwib.com/_login/get_all_orders_test2.php
    All is going well until I get to the DataGrid, which doesn't
    display the data, although I know it is there as I can see it in
    debug mode. I've checked the dataField property of the appropriate
    DataGrid column, and it appears correct.
    Following is a summary of the relevant code.
    ...An HTTPService named "get_all_job_orders" retrieves
    records from a MySQL database via PHP...
    ...Results are formatted as E4X:
    HTTPService resultFormat="e4x"
    ...An XMLListCollection's source property is set to the
    returned E4X XML results:
    ...The "order" node is what is being used as the top-level of
    the XML data.
    <mx:XMLListCollection id="jobOrdersReviewXMLList"
    source="{get_all_job_orders.lastResult.order}"/>
    ...The "jobOrdersReviewXMLList" collection is assigned to be
    the dataProvider property of a Tree list, using the @name syntax to
    display the nodes correctly, and a change event function is defined
    to add the records to a DataGrid on a separate Component for
    viewing the XML records:
    <mx:Tree dataProvider="{jobOrdersReviewXMLList}"
    labelField="@name"
    change="jobPosForm.addTreePositionsToDG(event)"/>
    ...Here is the relevant "jobPosForm" code (the Job Positions
    Form, a separate Component based on a Form) :
    ...A variable is declared:
    [Bindable]
    public var positionsArray:XMLList;
    ...The variable is initialized on CreationComplete event of
    the Form:
    positionsArray = new XMLList;
    ...The Tree's change event function is defined within the
    "jobPosForm" Component.
    ...Clicking on a Tree node fires the Change event.
    ...This passes an event object to the function.
    ...This event object contains the XML from the selected Tree
    node.
    ...The Tree node's XML data is passed into the positionsArray
    XMLList.
    ...This array is the dataProvider for the DataGrid, as you
    will see in the following block.
    public function addTreePositionsToDG(event:Event):void{
    this.positionsArray = selectedNode.positions.position;
    ...A datagrid has its dataProvider is bound to
    positionsArray.
    ...(I will only show one column defined here for brevity.)
    ...This column has its dataField property set to "POS_TITLE",
    a field in the returned XML record:
    <mx:DataGrid width="100%" variableRowHeight="true"
    height="75%" id="dgPositions"
    dataProvider="{positionsArray}" editable="false">
    <mx:columns>
    <mx:DataGridColumn width="25" headerText="Position Title"
    dataField="POS_TITLE"/>
    </mx:columns>
    </mx:DataGrid>
    In debug mode, I can examine the datagrid's dataProvider
    property, and see that the correct XML data from the Tree control
    is present. However, The datagrid does not display the data in any
    of its 6 columns.
    Does anyone have any advice?
    Thanks for your time.

    Hello again,
    I came up with a method of populating the DataGrid from the
    selected Item of a Tree Control which displays complex XML data and
    XML attributes. After the user clicks on a Tree branch, I call this
    function:
    public function addTreePositionsToDG(event:Event):void{
    //Retrieve all "position" nodes from tree.
    //Loop thru each Position.
    //Add Position data to the positionsArray Array Collection.
    //The DataGrid dataprovider is bound to this array, and will
    be updated.
    positionsArray = new ArrayCollection();
    var selectedNode:Object=event.target.selectedItem;//Contains
    entire branch.
    for each (var position:XML in
    selectedNode.positions.position){
    var posArray:Array = new Array();
    posArray.PK_POSITIONID = position.@PK_POSITIONID;
    posArray.FK_ORDERID = position.@FK_ORDERID;
    posArray.POS_TITLE = position.@POS_TITLE;
    posArray.NUM_YOUTH = position.@NUM_YOUTH;
    posArray.AGE_1617 = position.@AGE_1617;
    posArray.AGE_1821 = position.@AGE_1821;
    posArray.HOURS_WK = position.@HOURS_WK;
    posArray.WAGE_RANGE_FROM = position.@WAGE_RANGE_FROM;
    posArray.WAGE_RANGE_TO = position.@WAGE_RANGE_TO;
    posArray.JOB_DESCR = position.@JOB_DESCR;
    posArray.DES_SKILLS = position.@DES_SKILLS;
    positionsArray.addItem(posArray);
    So, I just had to manually go through the selected Tree node,
    copy each XML attribute into a simple Array, then ADD this Array to
    an ArrayCollection being used as the DataProvider for the DataGrid.
    It's not elegant, but it works and I don't have to use a Label
    Function, which was getting way too complicated. I still think that
    Flex should have an easier way of doing this. There probably is an
    easier way, but the Flex documentation doesn't provide an easy path
    to it.
    I want to thank you, Tracy, for the all the help. I checked
    out the examples you have at www.cflex.net and they are very
    helpful. I bookmarked the site and will be using it as a resource
    from now on.

  • Product Revenue Bookings and Backlog Dashboard does not display any data

    Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
    They are able to see just the parameters.
    Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
    What can I check?
    Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
    Screenshot is at:
    https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
    Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
    Any ideas?

    hi
    We have faced the similar problem after the upgrade to 10G
    What we did was
    Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
    we were able to get the data once the clear and load is completed successfully
    Regards
    Ramesh Kumar S

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • My wacom tablet does not work correctly after updating to mavericks.

    My wacom doesn't work.

    Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
    Thanks,
    Teresa
    I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
    I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
    Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
    p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

  • Text box does not display the date??

    I have a text box <input type="TEXT" name="invoiceDate" readonly></input>. I select the date using datepicker .The date gets displayed in the text box.Then i click on "Show" button which loads the same jsp page again.
    When the page is loaded the text box does not show the date.
    I try to save the date in the text box as
    <% String date1=request.getParameter("invoiceDate");
    <input type="hidden" name="date1" value="<%=date1 %>">
    <%>
    The value is saved in this hidden variable..
    Plz help me what to do next
    Thanks

    Its a hidden field and that's why it isnt displayed.
    Use
    <input type="text" name="date1" value="<%=date1 %>"> ram.

  • Importing clips from iMovie HD does not preserve capture date

    Hi,
    I am importing iMovie HD projects into iMovie 09.
    The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
    However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
    Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
    Thanks.

    Hi,
    I am importing iMovie HD projects into iMovie 09.
    The clips in iMovie HD (originally imported from DV) have the correct capture date/time on them.
    However, when I import these clips into iMovie 09, it does not preserve these dates for the events but instead chooses to use the "file create date/time" as the event date time.
    Is this info lost forever in iMovie 09 or is there some setting that can use the original clip capture date info as the event date/time?
    Thanks.

  • File Screening Audit Report does not contain any data : report statistics is empty

    Hi ,
     I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008. 
    I am getting details of file screen audit in Event log  , But incident report file screen audit report does not contain any value.
    Getting report for each incident of file screen audit  , But it does not contain any data in report statistics.
    Data available in scheduled report of file screen audit.. not available in incident report only..
    Please assist...
    Thanks,
    Vasanth.M
    Thanks, Vasanth.M.

    Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
    technet library :
    https://technet.microsoft.com/en-us/library/cc754540.aspx
    Carlo

  • Create data source -- table does not exist in data dict.

    Hello Experts,
    I'd like some suggestion on creating customized data source in SAP R/3.
    First, I created a program for extracting data in to a structure layout and then created an InfoSet to link with that program.
    Finally, I chose to create a data source for transaction data using "Extraction from Query".
    Once I save the datasource, there was a message like "Table SY does not exist in data dictionary."
    I checked that program and InfoSet. I did not found any compile error.
    I wonder how I could investigate this kind of error.
    I tried to create another InfoSet calling other program and then create a datasource. There was no error.
    My first assumption was there is something wrong in the program.
    Any suggestion on this would be appreciated.
    Thank you very much.
    -WJ-

    Thanks for your suggestion Pravin.
    However, I found the problem already. This is because the package assigned to a program and to a structure layout were different. After I reassigned the correct package name to the structure layout (same package name as assigned to the program), my datasource could be created.
    This problem has been resolved.
    -WJ-

Maybe you are looking for