Disabling Firefox 9 Proxy Connection settings using GPO (in Server 2008)

I am planning to disable Proxy Server settings in the connection settings in the Firefox options. I downloaded "firefoxdefaults & firefoxlock". Made these changes in the GPO (mentioned below)
Computer Settings
1. Delete Private Data cookies
2. Phishing Protection - Enabled.
3. Proxy Settings - Disabled
4. HomePage - Enabled.
5. Extension and Theme Installation - Preference State (Locked) & Allow Addin Installation _ Disallowed.
User Settings
6. Proxy Settings - Disabled.
GPO didnt apply properly. Can you please let me know if there is any other options there to disable proxy settings. Hoping to see your message.

Hi,
We can add the sites to trusted site and clear temp files for test. Detail steps are in the following KB.
even though the steps in this KB is related to XP, we can refer to update the steps to apply to windows 7.
How to troubleshoot problems accessing secure Web pages with Internet Explorer 6 Service Pack 2
http://support.microsoft.com/kb/870700/en-us
If it is not the case, this may be an issue with your proxy setup, if you use a proxy server, try turning it off in your windows network settings.
For more information, please see:
Change proxy server settings in Internet Explorer 9
http://windows.microsoft.com/en-in/windows/change-ie9-proxy-server-settings#1TC=windows-7
For more reasons that can cause webpage load slowly or don’t slow at all, please see:
Webpages load slowly or don't load at all
https://support.google.com/chrome/answer/113910?hl=en
Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope this helps,
Ada Liu
TechNet Community Support

Similar Messages

  • I want to disable Internet access to user using GPO

    I am using Win Server 2008 R2, I want to disable the users from accessing Internet which are in that OU. Can anyone tell me how is it possible ?

    Hi,
     Disabling Internet access using software on the client is inherently difficult. The client isn't aware of what is an internal resource (like an Intranet page for example) as opposed to an Internet resource. You can use GPOs to disable specific programs
    (like browsers) or to change how traffic is routed by the client but in order to effectively control who can and can't access the Internet, your best bet is a perimeter device like a proxy or firewall that sits between your clients and the Internet and is
    integrated with AD so it can manage access to the Internet based on users, groups, IP addresses, etc.
     The closest you can come without a proxy is to configure a proxy server address for those users using the Internet Explorer Maintenance component (found under User Configuration\Windows Settings). This proxy can either be a non existent address or
    if you want more control over the error messages users get, it can be an internal web server with a page that provide a custom message. The same configuration will allow you to list specific URLs that are exempt in case you have specific web sites, internal
    or external that must be available.
     Note that this option will apply to all browsing, internal and Internet based, but will only impact IE. Internet access using other browsers or other software will not be impacted unless that software leverages the IE proxy configuration (which many
    applications do). 
    Hope this helps,
    Guy

  • Temporarily disable Digital Signature Checks to Install MS SQL Server 2008 with no Internet Access

    I am attempting to install a licensed copy of MS SQL Server 2008 in a Private Enclave that does NOT have Internet access on a Win2008 R2 SP1 server (that is VM - thus I can't reboot and press F8 to select "Disable Driver Signature Enforcement"
    ). The installation fails with an error of the vc_red.cab file being found either corrupt or a bad digital signature.  The file is good, but the signature has an expiration of 2011.   I understand that a DOTNET SDK v1.1 program called setreg.exe
    will enable disabling the digital signature check, but I am not permitted to use that program. 
    I might be permitted to use the "Signtool.exe" utility, but it is not clear what command sequences are necessary to disable and then re-enable the Digital Signature checks.
    I saw a thread that recommended using the command:
    bcdedit.exe /set nointegritychecks ON
    However, the comments indicated that this might not have worked.
    Are there Registry settings I can use with regedit to make the necessary changes to be able to install the application?  I anticipate running into this problem with other software when I do not have Internet connectivity.   I already tried
    downloading the Microsoft CRL files; updated the lists on the Server; and rebooted.  This did not solve my problem.  

    Hi,
    As far as I know, it is not recommended to disable digital signature check.
    Since we are not familair with installing MS SQL server, please also refer to SQL forums below to see if experts there have more insights regarding the matter.
    https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Re: Drive Mapping with GPO from Server 2008 R2 to Windows 7 Pro

    Justin,
    I didn't think of that. They are all OEM at the minute.
    However, I've been testing the mappings using an RDS server with their credentials. There's nothing on that platform that would be causing a drive letter conflict.
    Still at the drawing board I'm afraid.

    Good morning Spice-heads,I've got an issue with GPO and drive mappings. They're set in the standard way, new GPO linked in the root of our domain - through User Configuration, Preferences, Windows Settings, Drive Maps.They're all set as below;
    They have also been set with Item Level Targeting with security groups and set to run in users context.The issue I'm having is that some users are logging in, the policy is running without issue and all is fine. Other user are logging in and only receiving the home drive and a business wide share drive that is targeted to \Domain Users.I've looked at gpresult, there is nothing in there that I can see that would explain why the drives are not being mapped - help?!Thanks,Tonka
    This topic first appeared in the Spiceworks Community

  • Remote Desktop Connection certification issue with Win Server 2008 R2

    When connecting to Windows 2008 server R2, from Windows 7, Vista and Mac OS 10.6.7 via Remote Desktop Connection, i am getting a 'Server Name on the Certificate is Incorrect' error. 
    if i click connect, i can still connect to the machine, due to a 3rd party managing the server, this doesn't look very professional on my part...
    The server is a standalone machine and is not currently on a domain. RDC is only used for management purposes.

    Hi,
    This certificate error is normal, because your client do not trust the certificate which is installed on the terminal server. To avoid this issue,
    you can export the certificate and import this certificate into the client side (computer account).
    Thanks.

  • Multiple Home Page settings not working in Server 2008 R2

    I have Windows Server 2008 R2 as a DC & ADC is same 2008 R2 server both with SP1 with IE 11 installed 
    other Group policies are there & running well.
    I had setup two home pages but on user machines its showing & running only one Primary home page.
    I have one my intranet site & another home page is our website.
    I have enable "Disable changing Primary Home page" & kept my intranet page there.
    I have enable "Disable changing Secondary Home page" & kept my website page there.
    After gpupdate I can see only one page in users Internet settings. My website page is not at all loading !!!
    Scenario 2 :-
    I have selected not configured option for "Disable changing Primary Home page" & apply.
    I have enable "Disable changing Secondary Home page" and kept Both Intranet & my website page address there.
    after Gpupdate its loading 3 pages. Twice same intranet page & one website page.
    In group policy configured only two & loading 3 pages?
    I need it must show only two pages. Tried all the ways & seems frustrating with Windows Server 2008 R2 Group Policy.
    Does anyone succeeded in the multiple home i.e. must load Only TWO pages in the IE browser via Group policy.
    All users have 64 bit Windows 7 OS with IE 10 & IE 11 browser installed & updated. Servers has IE 11  
     

    Hi,
    As suggested by Martin, the easy way to do this is GPP.
    >>I have selected not configured option for "Disable changing Primary Home page" & apply.
    >>I have enable "Disable changing Secondary Home page" and kept Both Intranet & my website page address there.
    Before going further, we should set both these settings as Not Configured. Then we go to
    User Configuration\Preferences\Control Panel Settings\Internet Settings.
    After creating a new Internet Settings item, we can configure the homepages in the blank on the
    General tab. Note: to make the settings effective, we need to press
    F5 to make the line under the blank green. At last, we can run
    gpupdate/force to refresh the policy.
    Best regards,
    Frank Shen

  • Why won't Web Proxy Admin Service start on Win Server 2008 installation?

    Hi,
    I've just installed Sun Web Proxy 4.0.13 on my Windows Server 2008 box. I cannot get "Sun Java System Web Proxy Server 4.0.13 Administration Server" to start, it fails with the following event messages:
    In Application logs i get:
    "+The description for Event ID 26 from source c__sun_proxyserver40_proxy-admserv_config cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.+
    +If the event originated on another computer, the display information had to be saved with the event.+
    +The following information was included with the event:+
    +File C:\Sun\ProxyServer40\proxy-admserv\config/server.xml, line 8, column 8: Unknown element 'SERVER'+
    +the message resource is present but the message is not found in the string/message table+"
    ...and....
    "+The description for Event ID 26 from source c__sun_proxyserver40_proxy-admserv_config cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.+
    +If the event originated on another computer, the display information had to be saved with the event.+
    +The following information was included with the event:+
    +File C:\Sun\ProxyServer40\proxy-admserv\config/server.xml, line 8, column 8: Unknown element 'SERVER'+
    +the message resource is present but the message is not found in the string/message table+"
    Any help would be greatly appreciated. I have JRE 6.0u18 installed, and pointed the install to use that directory for the JRE home.
    Many thanks, Mark
    P.S. the proxy server service starts fine, it's just the admin service that won't start....

    Hello,
    Could you please copy the model.mdf and modellog.ldf from
    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\Binn\Templates
    To
    C:\Program Files\Microsoft SQL Server\MSSQL10.MSSQLSERVER\MSSQL\DATA
    Rebuilding the system databases you will lose lose logins, jobs, SSIS packages. You may have to restore or attach user databases.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Deploying Printer Server via GPO (Windows Server 2008 R2)

    Hi guys,
    I having encountered problem while  deploying printer server via GPO. My operating system is Windows Server 2008 R2. See the details below:
    "one or multiple errors have occurred during the execution of a deply or remove printer connection problem"
    Anybody know's how to fixs this problem ASAP.
    Any suggestion or clarification would be great!
    Please advice me, thanks
    Regards,
    Bishelp

    Hi Bishelp,
    Firstly, please check the security tab of that printer, make sure your user account has access permission for it.
    To perform these procedures of deploy printer connections, you must be a member of the local Administrators group and have write access to Group Policy objects (GPOs) in the AD DS domain or the organizational unit (OU) to which you want to deploy printer
    connections. For more information please refer to following MS articles:
    Deploy Printer Connections
    http://technet.microsoft.com/en-us/library/cc731292.aspx
    In addition, it would be helpful if you could help to collect the following information:
    What is the detailed information about this error?
    What are the steps of deploying printer server?
    Regards,
    Lany Zhang

  • How much memory does SQL Server 2008R2 Standard use on Windows Server 2008 R2 64-bit?

    Hi,
    can anyone tell me how much RAM will really be used by SQL Server?
    72 GB are currently installed. As Windows is only able to use 32 GB is SQL Server able to use the other 40GB + the unused part of the first 32 GB?
    Thank you very much!
    BR Matthias

    Sorry, I don´t understand your post ?!
    Maybe the question is if SQL Server is able to allocate more memory than the installed Windows Version is able to?
    Since your OS is Windows Standard edition(X64) it cannot use or a process running cannot use more than 32 G of memory.
    Now SQL server can use as much memory possible but it is now limited by Windows as your OS can only see 32 G.So it would be good part from your side to go to sp_configure and set 25 G for SQL server and can leave rest for OS( it just a figure not a actual
    value i have given,actual you have to calculate by yourself or refer to below link) .
    http://mssqlwiki.com/2013/04/22/max-server-memory-do-i-need-to-configure/
    As Andrew said after 32 G what ever memory you put it is waste.
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • How to get clients connected in WMS on windows server 2008 with c# coding

    Sorry to bother anyone about this question.
    Can anyone knows how to retrieve amount of client connection to Windows Media Server in real time same as WMS does on server console by c# programming ?
    I got logfiles of WMS in system32 directory for details but it must be off-line of all connections which will able to get those informations for doing anything,but in this case I want real time client connection
    at online when a client connects to WMS that I will get amout of that client also.
    I have tried to search Windows Media Service SDK to develop this on my Windows 7 OS,but I did not find that really.
    Can anyone knows this,please ?
    Regards,
    BigBerm

    Hi SYaGCi,
    Denis is right this is actually documented in the Supported Platforms Documentation:
    "Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
    Kind regards,
    John

  • Installing terminal server role on windows server 2012 to use for Windows server 2008 R2 machines.

    Dear
    Our current setup is as follows :-
    Active Driectory is in Windows Server 2003.
    Citrix Xenapp version 5.6 with all Xenapp servers in Windows Server 2003
    Now we are upgrading our Citrix farm to 6.5 and all Xen app servers into Windows Server 2008R2.
    We did the configuration and testing; everything works fine except the terminal server is not configured which gives the pop always for the expiry date.
    We do have license for 2012 terminal server which is not possible to downgrade for some reason and managent need to install new Windows Server 2012 for terminal server and activte the licenses.
    My question is :-
    1 Whether Windows Server 2008 R2 will get RDS cal license from Windows Server 2012 terminal server (RDS CAL license is of windows server 2012).
    2. What is the role and features I need to activate in Server 2012 in order to use for Citrix 6.5 (only applicable fetaure for getting the RDS cal license.) 
    3. Whether I can add this 2012 server into domain. Is it possible to add 2012 server into Windows Server 2003 AD. 
    Your early reply is highly appreciated.

    Thanks Jeremy..
    I got exactly the right answers I am lookoing for ..
    I successfully activated the terminal service on the newly created Windows 2012 Server and installed the retail license pack we had of 50+50+25 keys . It later shows the 125 keys successfully applied.
    when I tried to link the Xenapp (Windows Server2008R2) to the license server, it first gives me error that session host service role is not installed on the ternial server. So I installed that role also in the terminal server.
    But now its anothee error as below.
    RDS Cals are not available for this Remote Desktop Session host server, and licensing Diagnostic has identified licensing problems for the RD session host server.
    1. Is it wrong I did by installing session host server role into the terminal server (but really it gave me error like 'session host server role is not running on the license server' when I tried to link the license server).
    2. Is it the problem that Windows Server 2008 R2 will not get license from 2012 RDS CAL license.
    3. whether Clearing house will take time to update the license.
    Your reply is highly appreciated. I need to know whether any other way I can link the Windows Server  2008 R2 Servers (Xenapp) to the license server.

  • Consequences of disabling NetBIOS over TCP/IP in a Windows Server 2008 environment

    Is NetBIOS required in a network with 2008 Servers and Windows 7 and Windows 8 computers? 
    There are two 2003 and one 2000 server. 
    What functionality would we loose? 
    What are the major server functions or major applications that use NetBIOS. 
    Is there any way to find if any application or server is relying on NetBIOS. 
    Any help is much appreciated. 

    Generally it is the browser service that populates network neighborhood. This technology is no longer used with newer OS like server 2008, windows 7/8.
    Description of the Microsoft Computer Browser Service
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • How to connect java project to sql server 2008 r2 database

    i want to create an java application which has to create a database and later access it. My problem is that i am not able to connect sql server 2008 r2 database driver on to the netbeans.i have sql server 2008 r2 installed on my system.please
    suggest me the step by step procedure to establish the connection

    Hi ENG,
    To establish a connection to SQL Server from a Java project, you have to download the JDBC driver for SQL Server from
    here.
    After extracting the jar files(like sqljdbc.jar) from the above link, add the driver to the netbeansIDE.
    Test establishing a connection with the below Java Class.
    import java.sql.*;
    public class Test {
    public static void main(String[] srg) {
    String driverName = "com.microsoft.sqlserver.jdbc.SQLServerDriver"; //load the jdbc driver
    String dbURL = "jdbc:sqlserver://localhost:1433; DatabaseName=test"; //connection string to the db hosted on localhost
    String userName = "sa"; //user name
    String userPwd = "123456"; //password
    Connection dbConn;
    try {
    Class.forName(driverName);
    dbConn = DriverManager.getConnection(dbURL, userName, userPwd);
    System.out.println("Connection Successful!"); //print Connection Successful! if connection establishes
    } catch (Exception e) {
    e.printStackTrace();
    A demonstration video from Youtube for you reference.
    Connect NetBeans Project with Microsoft SQL Server 2008 - YouTube
    Since this is a question regarding Java, I suggest you post your subsequent questions to a java dedicated forum. It is appropriate and more experts will assist you.
    If you have any question, feel free to let me know.
    Eric Zhang
    TechNet Community Support

  • Can Endpoint 2012 be used on Windows Server 2008 R2?

    I have never used this product before.  I just need to protect one Microsoft Window Server running 2008 R2 Enterprise.  I don't need to install the infrastructure or manager.  Is this possible?
    Thanks!

    Hi,Yes you can simply install it manually, server 2008 r2 is supported no problem..
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Max Memory Settings Not Working (SQL Server 2008 R2)

    I have 12 GB ram in sql server 2008 R2 of 64 bit server (Windows 2008 R2).
    I have set the Max memory setting to 12288 MB Memory setting.
    Still the usage of sql server process is around 14  GB.
    Is Max memory setting not working?
    I have also enabled AWE after all it is 64 bit.
    Thanks

    Problem is that: my OS is halting due to this RAM. I have 16 GB of ram and assigning 12 GB to SQL SERVER and rest is using for OS. Please guide me how to get information about actual memory usage from all sql server processes. like
    all CLR etc 
    Hi,
    Are you also running SSIS/SSAS/SSRS with database engine services. What do you mean by OS is halting ?
    If you want to check whether SQL Server is facing memory crunch please have a look at perfmon counters from
    this link
    Sys.dm_OS_memory_clerks would be DMV helpful in tracking memory utilized by various processes
    I have also enabled AWE after all it is 64 bit. Thanks
    Please note AWE doe snot have any notable affect in 64 bit system.
    Below will tell you memory used by SQLCLR
    select single_pages_kb + multi_pages_kb + virtual_memory_committed_kb from sys.dm_os_memory_clerks where type = 'MEMORYCLERK_SQLCLR'
    Below query will give you memory consumed by various clerk
    SELECT type, SUM(multi_pages_kb)
    FROM sys.dm_os_memory_clerks
    WHERE multi_pages_kb <> 0
    GROUP BY type
    ORDER BY SUM(multi_pages_kb) DESC
    Can you reduce max server memory to 11 G and see if it gives some relief
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

Maybe you are looking for

  • How do i get contact photos to show up in imessage conversation on iPod Touch

    I have an iPod Touch 4th generation running ios 5.0.1.  When conversing through iMessages (Messages) on my iPad 2 small photos of my contacts show in the discussion window which is great because it helps to keep track of the conversation.  However, o

  • Goofy Cover Browser view in iTunes 7

    I guess Apple’s relationship with Disney finally got to close for comfort. I’m afraid Goofy just took over the iTunes UI design. As the name implies, the Cover Browser (rightmost view button) looks and almost functions like a browser. Unfortunately,

  • How can I set a report to have an audit trail?

    I am using Business Objects Enterprise and am having a difficult time getting an audit trail set up for reports. If reports are scheduled, then the audit trail exists. But if the reports are manually generated, no audit trail exists. Any suggestions

  • Forms 5 to connect to oracle 10g

    we're currently migrating from forms5/oracle8 to forms9i/oracle10g. all the migrated forms/reports will undergo testing before being moved to production so we're focusing on the important ones first. will there be any problems if we continue to use s

  • Strange problem with automattic start database on linux

    HI, We have Redhat Version 4.(update ) or Oracle Version 10.1.0.2.0 we followed instruction mention in documentation. ( 10gr2) for automatic startup database when linux system reboot. after create above script and followed all mention point when we r