Disabling iTunes from automatically starting when Headphone plugged in

Hi, I have a Macbook Pro running OS X Yosemite Ver 10.10.1. Whenever I plug in my Apple headphone it in, the iTunes automatically starts and I would like to disable the same. Some times its very much annoying where in, even if I am talking on FaceTime using my head phone, (I am guessing some small movements of headphone triggering this) the  iTunes starts automatically and the songs start to play during the FaceTime call.
Does any one know how to disable the iTunes from not starting up automatically, whenever a Headphone is inserted into Mac. I can start iTunes whenever I want like any other application. But I just don’t want any automatic starting of iTunes, when I plug the headphone! Appreciate any help in this regard. Thanks!

I think the following solution seems to work:
+ Go to the  - System Preferences - Users and groups //Need admin privilege and unlock to edit etc.
+ Remove iTunes from Login Items
+ Click Login Items
+ then select iTunes Helper and then the - to remove the application
+ Force quit the iTunes if it was already running
Problem did not seem to reoccur in my case. I have not restarted the mac but it seemed to work! Try yours and update please.

Similar Messages

  • How do I disable iphoto from automatically launching when I plug in my iPhone?

    Trying to figure out how to disable iphoto from automatically launching on my Macbook Pro every time I plug in my iphone via USB cable. Tried looking at preferences in iphoto and itunes, but can't seem to find anything. Thanks!

    It is your preference in iphoto.
    Set it not to open when a digital camera is connected.

  • How do I keep ITunes from automatically starting when I boot my PC?

    Everytime I start my PC, my I tunes starts automatically. I close it an it automatically starts again 5-6 minutes later. It happens when my IPhone is not connected. The problem began immediately after I updated to the new IPhone iOS 5 software.

    I appreciate the help attempt greatly, however, I do not have an Iphone, only an Ipod that I use with Itunes. Basically I have Itunes on my Windows PC, (NOT MAC) and it just has a mind of its own and opens randomly, whenever. I have scanned and searching the Itunes application for something to click off for automatically run, or something to that effect and I see nothing. There has to be a way to disable Itunes from running automatically. It has nothing to do with whether or not my ipod is attached.

  • Disable iTunes from automatically opening when iPhone is connected

    Hi, I use a windows xp comp with itunes for windows at work and whenever I just want to charge my iphone, itunes always automatically opens. I've disabled automatic syncing in edit>pref but the iPhone summary screen doesn't allow disabling "automatically open itunes when this iphone is detected" like itunes for my macbook at home has. Any help would be greatly appreciated as it's such a pain to have itunes open and load everytime i'm just charging my iphone at work.

    Try this:
    Start -> Control Panel -> Administrative Tools -> Services
    Look for "Apple Mobile Device", right-click and "stop", then right-click "properties". Under "Startup type" choose "Disabled".
    Do the reverse if you want it to work again.

  • How can I disable iPhoto from automatically starting when I connect my iPhone?

    Whenever I connect my iPhone to my Mac it automatically starts iPhoto?  How can I make this not happen?

    Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
    OT

  • How can i disable imessage from automatically starting up when i turn on macbook air?

    how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

    Welcome to the Apple Support Communities
    First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
    Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

  • How can I disable the Photos app from automatically running when I plug in my iPhone?

    How can I disable the Photos app from automatically running when I plug in my iPhone?
    I have no intention of ever using Photos, in fact, having to abandon Aperture takes me one step close to moving back to Windows, but I digress.
    I just want to NOT have to kill the Photos app every time I plug in my phone.
    Thanks.

    I am still seeing the option Image Capture, like shown in the screenshot that Rysz posted.   But it is another example of the hide-and-seek Apple likes to play with us.
    The option has to be set for each device individually. With the device connected to USB, you have to click the tiny disclosure triangle in the lower left corner of the sidebar to reveal the option.
    I was perfectly happy with the program I paid for (Aperture), and now to maintain the functionality I have to pay for another application (LightRoom) to get the functionality that I paid for in Aperture.
    Aperture 3.6 is working well with Yosemite. I will use it, as long as I have a Mac, that will run Yosemite or a compatible system.
    Have you looked at Capture One?  It looks much more similar to Aperture than Lightroom.

  • Is there a way to prevent iTunes from automatically starting the next playlist file on the iPad?

    Is there a way to prevent iTunes from automatically starting the next playlist file on the iPad?

    When you connect the device open iTunes and select it from the sidebar. Click on the Summary tab in the main window. Uncheck the option to automatically connect to iTunes. You will find it in the collection of options near the lower part of the window.

  • Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it

    Why does CS6 automatically start when i plug in my Canon Eos camera and how do I stop it from doing so?

    Autostart is controlled by your operating system. check the relevant system control panel or right-click the drive letter of your memory card to change these options in teh properties.
    Mylenium

  • ITunes does not start when I plug in my iphone after I upgraded to Lion?

    iTunes does not start when I plug in my iphone after I upgraded to Lion? It worked fine prior to upgrading.

    http://support.apple.com/kb/TS1538

  • ITunes does not start when iPhone plugs in

    my itune does not start when I plug my iphone or ipad in , this stater with lion install

    Please see here if it helps:
    https://discussions.apple.com/message/15705708#15705708
    Regards, Michael

  • Itunes won't start when i plug in my ipod

    itunes won't start when i plug in my ipod touch

    Good catch! Glad you got things working again.

  • How do I stop iTunes from coming up when I plug in the iPhone

    I don't always want iTunes to come up, only for syncing, when I plug in my iPhone or iPad. I most often just download photos using Image Capture and don't need iTunes for that.
    I see nothing in iTunes preferences (where it should be you would think) about disabling iTunes from starting up when  you plug in the iPhone.

    I'm being careful to rely on help with this as I have in the past 'done what is logical' and wound up destroying files and in a pickle. So I ask this one other related questions then:
    If I want to back up to computer then the 'automatically backs up to this computer' really means nothing as the message across from it says it has never been backed up before even though it automatically syncs then?
    This is very thin ice. I think I do remember in older versions of iTunes a checkbox like the one you mentioned first, but now it is gone.
    Whew. I'm sweating out what to do next.

  • How do I stop Itunes from automatically starting?

    Itunes automatically turns on when the computer is powered up, but Itunes is not in the startup folder.
    How do I stop Itunes from auto starting?

    10 minutes later: iTunes will not startup if the iPod is not plugged in upon boot up. If the system sees the iPod plugged in upon boot, then system will start. This seems to be done with the help of iTuneshelper.exe and /or iPodService.exe. if you don’t want iTunes to start automatically when the system boots do not have your iPod plugged in. if you want to be able to keep the iPod plugged in then you are going to have to msconfig at the start run command and stop the iTuneshelper.exe in the startup service area. This should stop the iTunes from starting up when the unit is plugged in and you are booting up. Sorry for the long sentences but thats a possiable fix, enjoy.

  • How do I stop Itunes from automatically starting on my PC

    Whenever I start my PC, all of a sudden as I'm working away in dfferent programs, Itunes will pop up automatically. I do not want this to continue to happen. I only wish Itunes to open when I ask it to open. How do I disable this function.

    I appreciate the help attempt greatly, however, I do not have an Iphone, only an Ipod that I use with Itunes. Basically I have Itunes on my Windows PC, (NOT MAC) and it just has a mind of its own and opens randomly, whenever. I have scanned and searching the Itunes application for something to click off for automatically run, or something to that effect and I see nothing. There has to be a way to disable Itunes from running automatically. It has nothing to do with whether or not my ipod is attached.

Maybe you are looking for

  • Settings for outlook (formally hotmail) to be used with Mac Mail

    Can anyone help please.... What are the correct settings to get my Outlook (formally Hotmail) email so I can use it through Mac Mail. Thanks for any help out there.

  • LMS 3.2 DFM Import of Devices Failed

    Hi, My name is Ashley. I have recently installed LMS 3.2. Everything is working fine, CM, CS,HUM, RME,IPM. However, I am not able to import devices from DCR to DFM. On Auto Allocation Window, I get the following error: Error in getting instance of Tr

  • Smartform NODIALOG , OTF issue

    Hi Experts, My requirement is to convert Smartform to PDF and download it in local drive. I wanted to suppress the Print option dialog, I have done the coding to suppress it but still the Print Option dialog opens and It asks for Print . If i give pr

  • K1 Tablet unable to detect hotspot

    Hi I have set hotspot on my windows laptop. My Iphone and all other devices detect that hotspot and uses internet through it except my K1 tablet. it is unable to detect the hotspot. what can i do so that my tablet detect the hotspot...

  • How do I send entire pdf form via email from web browser

    How do you send a pdf completed form on your web browser via email to email address?