Disabling port 389 for version 4.x/5.x of the Directory server?

Is it possible to close port 389 for version 4.x/5.x of the Directory server?
We need to ony enable 636 for SSL communications. WE currently limit 389 access to the CMS (which oddly enough <bold>requires</bold> it - ARRGGGG!) by IP Address. We're currently running NT 4 and have turned off 389 and found that there is a need to have 389 open for some initial operations (ignoring the CMS requirement for testing). We have not fully tested this under Solaris ... but anticipate the same to be true.
Rich

iPlanet Directory Server 5 can run without the 389 port enabled... You need to set the LDAP port to 0.
However, this will prevent the Console and the Admin Server from working correctly. It is OK if you do all the administration of your server using command line utilities.
Regards,
Ludovic.

Similar Messages

  • I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please?

    I need a copy of the PDF guide for version 12 I have just installed - the link that appears in searches takes me to version 13. Where can I get the version 12 copy please? (I bought the Photoshop Elements and Premiere Elements pack, but have only just installed and started to use).

    Hi,
    You can find the Help Archives at Adobe Premiere Elements Help | Archive
    Regards,
    Premiere Elements Team

  • Using secure port only and disabling port 389

    Hello everyone,
    I'd like to know if it is possible to run LDAPS port 636 and stop LDAP port 389. Will this have bad results with other applications like messaging server, administration server,.... and if this is feasible without any drawback, how can we do that?
    Thank you very much for your help

    Scott,
    AccessHW.zip should work for WinXP according to what I have read..(though it may vary with SP1 or 2 or updated drivers etc.) If it does work for you...that would be the easiest way to communicate via your port in XP.
    -Brett

  • I have the new Air Port Extreeme model A1521 and I need to set up port forwarding for HTTP. HTTP is not on the list in the set up. Does anyone know if any of those choices work for HTTP?

    I am on a Windows 7 Ultimate PC and right now there is no Airport utility for setting up the new Apple Extreme so you have to do it on your iPad or iPhone. Does anyone know how to set up port forwarding for HTTP to get to DVR security cameras? There is nothing in the list that indicates HTTP port forwarding.

    Thanks for your reply Tesserax as I did figure this out on my own. It took a bit because all of the options are not clear what they are for like the previous Airport Extreme and Apple does not support or guarantee that port forwarding will work for you application nor did any of the Apple support persons I spoke too have any knowledge for this feature. You also have to fill in the public if you are viewing through someone else's Wi-Fi or on your cell phone carrier network. This new Airport Extreme is a bit different since you cannot use the Airport utility on a PC like the older model and if anyone else is reading this they should be aware that if you do not have an Apple computer, iPhone or iPad and I'm not sure if some of the other network enabled devices like iPod Touch that you must use that can do it, there is no Airport utility for the PC and you would be wasting your money or have to take it back and get another brand wireless router to use if you do not own any of the above mentioned Apple products.

  • When I try to connect to the web using the larest version of firefox, it tells me the Proxy Server is refusing connection. When I reinstall an earlier verion it seems to work fine!!! What's the Problem?

    Downloaded Latest version 3 6.?? .12
    Next time I tried to connect to the Web the Proxy server refuses connection & tells me to reconfigure my settings.
    I reinstalled the older version, which worked OK, then uploaded the latest version again & it does the same thing when I log off & try to reconnect!

    Other things that need attention, see http://www.mozilla.com/plugincheck/
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    # Shockwave Flash 10.0 r22
    # Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • 4.0.1. automatic update for Mac: ¿Does it take to connect the update server more than a 20 minutes?

    I have operate Firefox in my MiniMac system for the last year, no problems, but in the last 15 days I have received your update alert, I accept and then in more than 20 minutes times nothing hapend, I stopped because I do not now why this so long time
    Your:
    "... Downloading Firefox... connecting to the update server..."
    Tanks

    If you have problems with updating then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
    Download a new copy of the Firefox program and save the DMG file to the desktop
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Trash the current Firefox application to do a clean (re-)install
    * Install the new version that you have downloaded
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • How do I fix my e-mail password for I-photo?  Get this message, "The email server didn't recognize your username/password combination."

    When trying to send a group of photos the e-mail requested my password.  Apparently I gave it the wrong one.  When I tried to resend, it doesn't ask for a password, just gives me this message, "The email server didn’t recognize your username/password combination."  How do I fix the problem?  I tried I-Photo help, but it says "NOT available."  I'm getting VERY frustrated since my I-Book G-4 NEVER did such "STUPID" things like ask for a password to send photos!!!  
    I tried sending single photo, but get the same message.
    Also, my e-mail is NOT @bellsouth.net.  It is @icloud.com  I tried to change it but couldn't.  How do I change it on this site.  I tried to edit my info, but couldn't change the e-mail!!
    <Email Edited by Host>

    I'm trying to email from iPhoto

  • How to Send biulk mail  for 20,000 people with out blocking the mail server

    Hi .......... ALL
    I am developing a News module in our project, for this have to write code to send everyday news for 20,000 mail Ids
    I Developed a code that can send to one Id or multiple.
    Weather this type of mail sending treated as spam mail or blocking the mail server i did not know, any of one can please help me.
    If this type is not suitable then what is way to send bulk mails please guide me
    please help me......................
    BY Ramds
    MY Mail ID: [email protected]
    Edited by: ramdasteja on Oct 3, 2008 4:13 AM

    Hi .......... ALL
    I am developing a News module in our project, for this have to write code to send everyday news for 20,000 mail Ids
    I Developed a code that can send to one Id or multiple.
    Weather this type of mail sending treated as spam mail or blocking the mail server i did not know, any of one can please help me.
    If this type is not suitable then what is way to send bulk mails please guide me
    please help me......................
    BY Ramds
    MY Mail ID: [email protected]
    Edited by: ramdasteja on Oct 3, 2008 4:13 AM

  • How do you install the NT domain connector onto the Directory Server Integrated Edition 5.0 for Solaris?

    The NT installation lists the NT Domain connector as an option. The Solaris version doesn't. I spoke briefly with a project manager at Sun who said putting an NT Domain connector onto a Directory Server on Solaris was possible, but I'm not sure how.

    You'll have to install the NT connector on an NT machine. The Join Engine that joins this connector can reside on Solaris.

  • Can sun jdk 1.5 for webstart and sapjvm co-exist on the same server?

    We just installed PI 7.1. We would like to install sun jdk 1.5 on the PI 7.1 server so we can use the pi tools on the server, but we are not sure if sapjvm and sun jdk can co-exist, or if it's going to cause any problem with PI 7.1, any setting is needed to tell PI which java to use if multiple version is installed? Does anybody know?
    Thanks
    Jane Zhou

    Kaushal,
    Thanks for the reply. note 718901 mentioned to change the jdk version, parameter jstartup/vm/home in instance profile can be used. if that's the case, that should be how we tell PI system whch jdk to use? in PI 7.1, it's point to DIR_SAPJVM, which points to sapjvm_5 in \exe directory. The notes you mentioned all apply to versions before 7.1, I'm wondering if it still works the same way with 7.1 systems.
    Has anybody installed a sun jdk on PI 7.1? anything that we need to pay attention to?
    Thanks
    Jane

  • Looking for infos about error code in Sun Java Directory Server 6.3.1.1.1

    Hi,
    I'm using Sun-Java(tm)-System-Directory/6.3.1.1.1 on Solaris 9 with two server configured in multi-master replication
    For a few time I receive those warning in the error logfile :
    [14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
    [14/May/2012:06:18:40 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nabcdycn, ou=People, dc=example,dc=com"
    [14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
    [14/May/2012:06:19:11 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nefghzer, ou=People, dc=example,dc=com"
    [14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
    [14/May/2012:06:20:44 +0200] - WARNING<5384> - Entry - conn=-1 op=-1 msgId=-1 - Entry error Convert LDIF entry into LDAP entry, fast method. Error: non-contiguous deleted attribute type for "myPasswordRetryCount"in entry dn="uid=nijklkkh, ou=People, dc=example,dc=com"
    and I would like to know what's going up and what I should do, so in case somebody have some infos about it, I would be very interrested.
    I'm trying to find a way of veryfing fragmentation of the backend, but not sure about this.
    TIA

    Looks like the attribute sunIdentityServerDiscoEntries is defined twice in the schema. Run the following and see where it is defined for the second time.
    # cd /var/opt/SUNWdsee/dsins1/config/schema
    # grep -w sunIdentityServerDiscoEntries *.ldif | grep -iv objectclasses
    Edited by: etst123 on Mar 3, 2009 1:28 PM

  • How do I get the version of the Directory Server I'm running?

     

    Try something like this...
    ldapsearch -h <ipaddress> -p <port> -D "cn=directory manager" -w <password -b "cn=config" -s base objectclass=* | grep version

  • Sql script for uploading multiple .rdl files in to the reporting server

    Hi,
    I have multile .rdl files in my local path.i have to upload those .rdl files in to the repoting server single attempt  using sql script.
    please help me on this issue.
    Thanks & Regards,
    Muni

    I am aware of three different options.  RS.exe, Working with the APIs (i.e., CreateCatalogItem) using custom code like C# or PowerShell, or using BIDs.
    Here's a good link on the first two items:
    http://msdn.microsoft.com/en-us/library/ms159720.aspx
    You could also add each report to a BIDs project and deploy that way.  I don't think Microsoft will support any other methods, like using a SQL Script.

  • Could not activate iPad, even after restoring to 7.02 version. Can you help check the activation server?

    Itunes:
    We're sorry, we are unable to continue with your activation at this time.
    Please try again later, or contact customer care.

    see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html

  • NAT configuration and Port Mapping for xBox

    I'm looking for help with port mapping to open up the NAT for an xBox One. I'm working with the following network devices:
    xBox One
    DSL Modem: Embarq (ZyXEL) 660R series
    Airport Extreme version 7.7.3
    I understand the following from researching the issue:
    The default settings for both devices block the ports needed for xBox Live.
    Airport Extremes are not on the compatible list for xBox.
    Port Mapping is better then creating a DMZ for the xBox.
    The xBox needs its own manually set IP address.
    I switched my Network>Router Mode from Off (Bridge Mode) to DHCP and NAT. I then created a DHCP Reservation and the Port Settings for that IP.
    After doing this, the Airport would restart and display a warning - Double NAT. I figured this was because the 660 settings showed the NAT Mode to be SUA Only. The Edit Details link displayed an empty table where you edited the SUA/NAT Server Set. I switched from NAT Mode>SUA Only to None. So there was my Double NAT and I would have thought that would have removed one.
    I also disabled the Firewall and Enabled the UPnP.
    After restarts the Airport continued to display the Double NAT error. However, with the 660's NAT Mode set to None, the Internet was not there. Web browsers and email accounts replied with server not found.
    Only with the 660 set to SUA Only and the Airport in Bridge Mode is the Internet accessible. I now have the details for the SUA filled out for the xBox's IP address and ports.
    Hypothesis
    Since both devices are acting as DHCP servers the port mapping is not working. Rather then have the 660 distribute IP addresses and then having the Airport distribute another range of numbers, I need to have both devices bridge and distribute one range of numbers. Currently the 660 is using the 192.168 range and the Airport is using the 10.0 range.
    Am I correct? Any thoughts and suggestions are welcome.

    Port forwarding through a double NAT.. is near impossible.. !!
    And the xbox is so attuned to using UPNP it is very hard not to.. even port mapping is not a great fix. Since apple decided gamers did not count as users for Airports.. I think honestly it is best to bypass the airport and stick to upnp from the modem router.
    What method of authentication does your ISP use? Because it is really better to use one router.
    And in fact the router should be the Zyxel. If you plug the Xbox to the Zyxel running in full router mode, with the airport removed from the network does it work and open NAT??
    If not replace the Zyxel with a modern listed router that is xbox compatible and bridge the airport to it.

Maybe you are looking for

  • Error while attaching A.W. in A.W.M. 10g

    Hello, my database is 10g 10.1.0.4.2 an I'm using Analytic Workspace Manager 10.1.0.4. I've created an analytic workspace, and I've worked with it (creating some dimensions and cubes, working ok) for several days. But, suddenly, when I connect and I

  • IPod Nano 5g worthless

    After getting an iPod Nano 2g, I was really impressed with the functions and the connectivity it had with iTunes. I loved the play count function, and everything else about it. I recently bought an iPod Nano 5g, and I consider it worthless junk. It w

  • My sleep button is jammed and i cant fix it what do i do

    My sleep button is jammed i tried using an alcohal swab but it didnt work what do i do now

  • Adobe for mobile

    tryin to watch full episodes on abc.com on my phone.... but the site says i need latest version of adobe.... help....????

  • Need older version of app

    I have what I believe is a G1 itouch... I had the Citrix receiver on it. I saw a message that said there was an update, so I updated..but now its the 4.0 version and as I understand my device doesnt support 4.0 So how can I get the older version back