DISABLING SECOND MONITOR - 5900

Is there any way that I can manage to disable my Second Monitor when selecting an application (game), other than remembering to go to Display properties and close it from there.
I tried Powerstrip but that is really for multiple Graphics Cards rather than Dual Monitor set up.
I used to have a second PCI card but apparently my 460W PSU is insuficient to run this as well as the rest of my Machine

In Mirrored mode, the same resolution must be used for both monitors. If they are too far apart, that sometimes means the external or second monitor stays dark.
System Preferences > Displays ... uncheck     [√] Mirrored.

Similar Messages

  • Enable/disable second monitor Mavericks - only software solution.

    I am looking for a way to disable a second monitor (plugged into the Display Port of a 2011 Mac mini) without unplugging it. Does anyone know of a software solution?
    When I am working I like that second monitor for desktop space, but other times (watching Netflix for example) the second monitor (in my case TV Sony Bravia) taxes the video card to much and degrades video playback performance. It would be great to have a software switch to ignore the second monitor. Right now, the only way I have found to do this is to unplug the display port cable from TV.
    SwitchResX doesn’t recognize any of monitor or TV in Mavericks, so the app is useless. It would be fantastic if anyone know software solution (I really would like to have plugged second monitor all the time).
    Thanx

    I've been using SwitchResX for quite a while, sometimes buggy but very useful: http://www.madrau.com
    best,

  • Disable second monitor at host at login.

    As an IT guy using Central, I have several clients that I have given access to their computers.  Multiple of thest clients have requested that the second monitor on the host computer be disabled when logging in.  They would like to replicate how RDP behaves in this manner.  Any help would be appreciated. --Pingman

    Hi,
    This might be depended on product itself.
    On my lab machine, VDI is single-threaded and just show one session.  
    Thus I suggest you contact Citrix support to see if there are some suggestions.
    Karen Hu
    TechNet Community Support

  • Disable second monitor when not in use

    Topic says it....I'm using SwitchResX and for the most part it works ok...I have a second monitor that I use sometimes...I'd like an app that I can just say "disable the second monitor" so that it will not show up in Display Prefs, AND will go into power sleep mode...anyone seen anything like this?  Thanks all.

    According to this thread, SwitchResX allows you to do exactly what you're looking for.  It's right on the webpage:
    You can disable or deactivate a monitor without having to physically unplug it, allowing you to use a laptop in clamshell mode with external monitor, keyboard and mouse

  • Disable Second Monitor Mac Pro

    I have a nice new Mac Pro system with the standard Nvidia 7300 Video card. I connected a second dipslay to it today to watch some videos on my 32" HDTV. However I noticed that the video really suffers when both displays are active in extend mode. The video stutters and I encounter a lot of "image slicing" that is really distracting. I found that if I watch the videos in mirror mode everything is fine. Here comes the question is there a way to disable the seond display when I am not using it? I used to do this all of the itme on my Windows box I could just click disable secondary display and it would turn off and I wold be back to a single monitor config without manually unplugging the seond monitor. Anyone got any ideas?

    According to this thread, SwitchResX allows you to do exactly what you're looking for.  It's right on the webpage:
    You can disable or deactivate a monitor without having to physically unplug it, allowing you to use a laptop in clamshell mode with external monitor, keyboard and mouse

  • How do you disable the double dock and top menu bar on my second monitor.

    I need to get rid of the double dock bar and top bar on my second monitor. It is killing me and my work flow. How do you disable this feature.

    Try double tapping the upper left cornerof the touch pad. It worked for me...   -Ed

  • Disable Spaces for second monitor

    Hi there,
    I wonder if it's possible to deactivat Spaces for my second monitor, because I primarily use it for my chat applications, so I don't have to switch back and forth.
    Thanks in advance

    I'm really surprised not more people are talking about this. Apple? You have a solution? Cause right now Spaces is un-usable. I use it on a machine at work and LOVE it! I only need 4 spaces, but with the dual monitor all of the sudden i have 8 spaces of different sizes and it *****.
    by the way, that last word that i can't believe apple blanked out is " s-u-c-k-s"
    Message was edited by: redstyles

  • DVI- HDMI discoloration on HDTV (as second monitor)

    Hello all.
    I have been having some issues when using my Philips CRT 30" 1080i HDTV as a second monitor via a DVI->HDMI cable. There seems to be a discoloration that occurs (my best guess being a "green" discoloration) that occurs in the top left corner of the screen. It is made all the more apparent when you then unplug, and a purple haze is left in the corner of the "blue" video input channel. (i imagine the green discoloration on the blue channel yields purple).
    From what I can tell, this problem does not occur on any other video input (say, a Wii on the composite channel, or an XBOX on the component, etc).
    I had heard rumblings that it could be, in order of bad to worst: a bad HDMI cable, a bad HDMI input on the television, or the television going bad period.
    Wanted to know if any of you have had or heard of similar experiences. Need to decide soon if I'm going to had to just buy a new HDMI cable, or if I need to buy a new television/monitor for a job coming up.
    Thanks in advance!
    Brian
    4/30/10 2:47 PM
    Hardware:
    Hardware Overview:
    Model Name: MacBook Pro
    Model Identifier: MacBookPro3,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP31.0070.B07
    SMC Version (system): 1.16f11
    Sudden Motion Sensor:
    State: Enabled
    Network:
    Bluetooth DUN:
    Type: PPP (PPPSerial)
    Hardware: Modem
    BSD Device Name: Bluetooth-Modem
    Has IP Assigned: No
    Service Order: 0
    Ethernet:
    Type: Ethernet
    Hardware: Ethernet
    BSD Device Name: en0
    Has IP Assigned: No
    Service Order: 1
    FireWire:
    Type: FireWire
    Hardware: FireWire
    BSD Device Name: fw0
    Has IP Assigned: No
    Service Order: 2
    AirPort:
    Type: AirPort
    Hardware: AirPort
    BSD Device Name: en1
    Has IP Assigned: Yes
    Service Order: 3
    Software:
    System Software Overview:
    System Version: Mac OS X 10.6.3 (10D573)
    Kernel Version: Darwin 10.3.0
    64-bit Kernel and Extensions: No
    Time since boot: 12 minutes
    ATA:
    ATA Bus:
    MATSHITADVD-R UJ-857E:
    Model: MATSHITADVD-R UJ-857E
    Revision: ZA0E
    Detachable Drive: No
    Protocol: ATAPI
    Unit Number: 0
    Socket Type: Internal
    Low Power Polling: Yes
    Power Off: Yes
    Audio (Built In):
    Intel High Definition Audio:
    Device ID: 0x106B00A0
    Audio ID: 44
    Available Devices:
    Speaker:
    Connection: Internal
    Headphone:
    Connection: Combo
    Internal Microphone:
    Connection: Internal
    Line In:
    Connection: Combo
    S/P-DIF Out:
    Connection: Combo
    S/P-DIF In:
    Connection: Combo
    Bluetooth:
    Apple Bluetooth Software Version: 2.3.1f4
    Hardware Settings:
    Vendor ID: 0x5ac
    Product ID: 0x8205
    Devices (Paired, Favorites, etc):
    Device:
    Type: Mouse
    Firmware Version: 0x200
    Services: Mighty Mouse
    Manufacturer: Broadcom (0x2, 0x314)
    Vendor ID: 0x5ac
    Product ID: 0x30c
    Diagnostics:
    Power On Self-Test:
    Last Run: 4/30/10 2:35 PM
    Result: Passed
    Disc Burning:
    MATSHITA DVD-R UJ-857E:
    Firmware Revision: ZA0E
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: To show the available burn speeds, insert a disc and choose View > Refresh
    Ethernet Cards:
    pci168c,24:
    Type: Other Network Controller
    Bus: PCI
    Slot: PCI Slot 5
    Vendor ID: 0x168c
    Device ID: 0x0024
    Subsystem Vendor ID: 0x106b
    Subsystem ID: 0x0087
    Revision ID: 0x0001
    Link Width: x1
    BSD name: en1
    Kext name: AirPortAtheros.kext
    Location: /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros.k ext
    Version: 422.19.10
    Marvell Yukon Gigabit Adapter 88E8055 Singleport Copper SA:
    Name: ethernet
    Type: Ethernet Controller
    Bus: PCI
    Vendor ID: 0x11ab
    Device ID: 0x436a
    Subsystem Vendor ID: 0x11ab
    Subsystem ID: 0x00ba
    Revision ID: 0x0013
    Link Width: x1
    BSD name: en0
    Kext name: AppleYukon2.kext
    Location: /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleYukon2 .kext
    Version: 3.1.14b1
    FireWire:
    FireWire Bus:
    Maximum Speed: Up to 800 Mb/sec
    G-Drive mini Device 00:
    Manufacturer: G-TECH
    Model: 0x0
    GUID: 0x1C0D02E00B0A3E
    Maximum Speed: Up to 800 Mb/sec
    Connection Speed: Up to 400 Mb/sec
    Sub-units:
    G-Drive mini Device 00 Unit:
    Unit Software Version: 0x10483
    Unit Spec ID: 0x609E
    Firmware Revision: 0x103
    Product Revision Level: FBEO
    Sub-units:
    G-Drive mini Device 00 SBP-LUN:
    Capacity: 250.06 GB (250,059,350,016 bytes)
    Removable Media: Yes
    BSD Name: disk1
    Partition Map Type: APM (Apple Partition Map)
    S.M.A.R.T. status: Not Supported
    Volumes:
    disk1s3:
    Capacity: 249.93 GB (249,925,091,328 bytes)
    Available: 21.68 GB (21,684,412,416 bytes)
    Writable: Yes
    File System: Journaled HFS+
    Graphics/Displays:
    NVIDIA GeForce 8600M GT:
    Chipset Model: GeForce 8600M GT
    Type: GPU
    Bus: PCIe
    PCIe Lane Width: x16
    VRAM (Total): 256 MB
    Vendor: NVIDIA (0x10de)
    Device ID: 0x0407
    Revision ID: 0x00a1
    ROM Revision: 3175
    Displays:
    Color LCD:
    Resolution: 1440 x 900
    Pixel Depth: 32-Bit Color (ARGB8888)
    Main Display: Yes
    Mirror: Off
    Online: Yes
    Built-In: Yes
    Display Connector:
    Status: No Display Connected
    Memory:
    Memory Slots:
    ECC: Disabled
    BANK 0/DIMM0:
    Size: 2 GB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0x7F7F7F7F7F9B0000
    Part Number: 0x4354323536363441433636372E4D31364647
    BANK 1/DIMM1:
    Size: 2 GB
    Type: DDR2 SDRAM
    Speed: 667 MHz
    Status: OK
    Manufacturer: 0x7F7F7F7F7F9B0000
    Part Number: 0x4354323536363441433636372E4D31364647
    PCI Cards:
    pci168c,24:
    Type: Other Network Controller
    Driver Installed: Yes
    Bus: PCI
    Slot: PCI Slot 5
    Vendor ID: 0x168c
    Device ID: 0x0024
    Subsystem Vendor ID: 0x106b
    Subsystem ID: 0x0087
    Revision ID: 0x0001
    Link Width: x1
    Link Speed: 2.5 GT/s
    Serial-ATA:
    Intel ICH8-M AHCI:
    Vendor: Intel
    Product: ICH8-M AHCI
    Link Speed: 1.5 Gigabit
    Negotiated Link Speed: 1.5 Gigabit
    Description: AHCI Version 1.10 Supported
    FUJITSU MHW2160BHPL:
    Capacity: 160.04 GB (160,041,885,696 bytes)
    Model: FUJITSU MHW2160BHPL
    Revision: 0081001C
    Native Command Queuing: Yes
    Queue Depth: 32
    Removable Media: No
    Detachable Drive: No
    BSD Name: disk0
    Partition Map Type: GPT (GUID Partition Table)
    S.M.A.R.T. status: Verified
    Volumes:
    disk0s2:
    Capacity: 131.94 GB (131,936,026,624 bytes)
    Available: 23.73 GB (23,733,391,360 bytes)
    Writable: Yes
    File System: Journaled HFS+
    disk0s3:
    Capacity: 27.63 GB (27,626,639,360 bytes)
    Available: 13.65 GB (13,652,635,648 bytes)
    Writable: Yes
    File System: Journaled HFS+
    USB:
    USB High-Speed Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x2836
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0xfd
    Built-in iSight:
    Product ID: 0x8502
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 1.45
    Serial Number: 607F59A99AB2811A (03.00)
    Speed: Up to 480 Mb/sec
    Manufacturer: Apple Inc.
    Location ID: 0xfd400000
    Current Available (mA): 500
    Current Required (mA): 500
    USB High-Speed Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBEHCI
    PCI Device ID: 0x283a
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0xfa
    USB Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x2835
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0x3a
    USB Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x2834
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0x1a
    Bluetooth USB Host Controller:
    Product ID: 0x8205
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 19.65
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple Inc.
    Location ID: 0x1a100000
    Current Available (mA): 500
    Current Required (mA): 0
    USB Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x2830
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0x1d
    USB Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x2831
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0x3d
    USB Bus:
    Host Controller Location: Built-in USB
    Host Controller Driver: AppleUSBUHCI
    PCI Device ID: 0x2832
    PCI Revision ID: 0x0003
    PCI Vendor ID: 0x8086
    Bus Number: 0x5d
    Apple Internal Keyboard / Trackpad:
    Product ID: 0x021a
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 0.18
    Speed: Up to 12 Mb/sec
    Manufacturer: Apple Computer
    Location ID: 0x5d200000
    Current Available (mA): 500
    Current Required (mA): 40
    IR Receiver:
    Product ID: 0x8242
    Vendor ID: 0x05ac (Apple Inc.)
    Version: 0.16
    Speed: Up to 1.5 Mb/sec
    Manufacturer: Apple Computer, Inc.
    Location ID: 0x5d100000
    Current Available (mA): 500
    Current Required (mA): 100
    AirPort:
    Software Versions:
    Menu Extra: 6.2.1 (621.1)
    configd plug-in: 6.2 (620.15.1)
    System Profiler: 6.0 (600.9)
    Network Preference: 6.2.1 (621.1)
    AirPort Utility: 5.5.1 (551.19)
    IO80211 Family: 3.1 (310.6)
    Interfaces:
    en1:
    Card Type: AirPort Extreme (0x168C, 0x87)
    Firmware Version: Atheros 5416: 2.0.19.10
    Locale: FCC
    Country Code: US
    Supported PHY Modes: 802.11 a/b/g/n
    Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
    Status: Connected

    Problems like that are caused by stray magnetism that cause misalignment of the electron beams from landing on the proper phosphor color. The set itself has a demagnetizer, but sometimes the magnetism is too strong for the built-in demagnetizer to overcome. But calling in a TV repair person to do a demagnetization is, I'm afraid, a throw back to bygone days. But that's what your TV needs.

  • How do I get my Mac Pro to see the second monitor through a video splitter and/or switcher?

    In a recording studio we have a Mac Pro with two video display monitors in the control room and we want to be able to show the content of the second monitor to the person in the recording room on a big display monitor there. However, when we interpose a switcher or splitter between the computer and the second monitor so that we can (with a switcher) switch the second monitor signal from the control room monitor to the record room monitor or (with a splitter) split the signal to go to both monitors, we have no luck. On startup the computer does not see the monitor through the switcher, so it doesn't recognize its existence. If we start the computer up without the switcher in the signal chain, it sees the second monitor just fine, and (weirdly enough) we can then change the cabling to interpose the switch, which then works to switch back and forth between second monitors (control room and record room), but that cable swapping's a royal PITA. We want a simple solution that will allow us to start up the computer, see the second monitor in the control room, then choose to show it to the person in the record room with a simple flip of the switch (or even better, split the signal so it's available both places). The splitter we've tried most recently is this one: http://tinyurl.com/curen39 I'd appreciate any advice from people who have tried this configuration or something similar with success. We have a full ProTools HD Accel 3 system installed, so there's no room to install a second video card. Thanks.
    Mac Pro 8-Core 2.4 GHz, OS 10.6.8

    Christopher Dobrian wrote:
    Thanks for the response! Yes, it's a 5x70 video card, a 5770 I believe. In any case, it does have the three ports, but (a not-well documented fact) that doesn't mean one can really get three full-resolution signals out of it at one time, as you alluded to in your message. So, yes, we did try hooking all three up directly to the computer, but the computer would only recognize two of those monitors, and the only way to get it to "de-recognize" the second monitor and recognize the third monitor was to physically disconnect the second monitor.
    I did say when you want to connect three monitors to 5x70's there are some rules to adhere to.  These are covered in the first two apple docs mentioned above, or by title:
    Mac Pro (Mid 2010), Mac Pro (Early 2009): Issues with three displays and multiple DVI, HDMI connections
    Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
    The general gist of these rules is that to drive three monitor son a 5x70 you need two active adapters.  That is why one of your monitors was disabled when you tried to add a third. 
    Here's a good explanation of what's going in here and why you need two active adapters on these cards:
    Active vs. Passive Displayport adapters *the truth*
    If you use DVI monitors and any of them have resolutions less than 1920 x 1200 then you can use single link active adapters. The "AMD Eyefinity Validated Dongles" chart shows some active (and passive) adapters that are acceptable.  For example of a single link DVI active adapter is the Accell B087B-006B.  An example of a dual link DVI active adapter would be the one from monoprice.com if you need to connect monitors with a resolution greater than 1920 x 1200.
    I'm doubtful that SwitchResX would be able to convince the computer that there were only two monitors connected and direct the second monitor signal to the correct place, but it certainly seems worth a try, so thanks for the idea! Any other ideas are still welcome in the meantime.
    I'm not doubtful.  It is a very powerful utility for dealing with all aspects of multiple monitor configurations (they call them "Display Sets") complete with forcing EDID information if necessary.  The different configurations can be controlled with a (contextual) menu and/or hot key.
    SwitchResX is academic at this point if you want to have all three monitors connected.  You would need to get that working first.  Then use SwitchResX to vary the configuration combinations.  So if you go this route the "name of the game" is figure out the active adapters you need.
    I only described in general terms above about the adapters since you never said exactly what kind of connections these monitors require (single link DVI, dual link DVI, hdmi, mini-displayport, vga). 

  • How to stop my second monitor from dimming (connected on a mbp)?

    Hello
    I have a MBP 13" late 2011, I have a second monitor connected to it (LG 24EN43VS), and it doesn't stop from dimming. For me it seems that as soon as I have movements in the second screen it dims, then come back full brightness, but it's annoying I feel like having a stroboscope lol.
    Thanks for helping.
    PS: I even did a fresh install of Yosemite + Reset SMC & RPAM

    I would also very much like to know this.Multiscreen as default is less convenient for me. Please advice on how to disable this M

  • Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI

    Can I use the HDMI out on a HP ALL IN ONE TOUCHSCREEN Desktop to connect a second monitor with HDMI  in without any additional  software or graphics adaptor.  I have a 520-1070
    HP - 23" Touch-Screen TouchSmart All-In-One Computer - 8GB Memory - 2TB Hard Drive ? I used a HDMI to HDMI cable and the monitor was not  recognized.

    Here are the specs for your HP TouchSmart 520-1070 Desktop Computer. As previously stated your computer Doesn't have a HDMI output, instead it has a HDMI input. This is designed to let you connect a game console, a DVD/Bluray player, etc. to use as a monitor.
    If you wish to conect a second monitor to your computer, you will need to use a USB-to-video adapter such as the EVGA UV Plus+ UV39 or EVGA UV Plus+ UV19. Using an adapter like these with the touch feature of your computer may cause issues with pointer control and you may need to disable the touch feature to use "extended desktop".
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • Can't get correct resolution for second monitor

    I am trying to use two monitors with a Vostro 1400 (Intel X3100 video card), the problem is I can't set the external monitor to 1280x1024. Gnome's screen resolution program only let me choose from 640x480 to 1360x768. Besides the resolution of the second monitor, everything else seems to be working fine. Some relevant info:
    Xorg.0.log
    X.Org X Server 1.5.3
    Release Date: 5 November 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.27-ARCH x86_64
    Current Operating System: Linux 2.6.27-ARCH #1 SMP PREEMPT Sun Dec 21 09:13:30 UTC 2008 x86_64
    Build Date: 17 December 2008 10:46:49PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 25 02:18:40 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Failsafe Monitor"
    (==) No device specified for screen "Default Screen".
    Using the first device section listed.
    (**) | |-->Device "Intel GMA X3100"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified. Using compiled-in default.
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (**) Extension "RENDER" is enabled
    (**) Extension "DAMAGE" is enabled
    (**) Extension "XFIXES" is enabled
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x7b54e0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 4.1
    X.Org XInput driver : 2.1
    X.Org Server Extension : 1.1
    X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xfeb00000/1048576
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 4.1
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.4.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 4.1
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel® GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Reloading /usr/lib/xorg/modules//libvbe.so
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.1.0
    ABI class: X.Org Video Driver, version 4.1
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (**) intel(0): Option "AccelMethod" "exa"
    (**) intel(0): Option "DRI" "True"
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xE0000000
    (--) intel(0): IO registers at addr 0xFEA00000
    (II) intel(0): 2 display pipes available.
    (**) intel(0): Using EXA for acceleration
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Failsafe Monitor
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (**) intel(0): Option "NoDDC" "True"
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Output VGA connected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using user preference for initial modes
    (II) intel(0): Output VGA using initial mode 1280x800@60
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (**) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) intel(0): Display dimensions: (336, 210) mm
    (**) intel(0): DPI set to (193, 247)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.4.0
    ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x00000000
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status:
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x0001f5f6 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x0000fafb to 0x00014141
    (II) Loading sub module "dri"
    (II) LoadModule: "dri"
    (II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) intel(0): Kernel reported 488960 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1955836 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xfea00000
    (II) intel(0): [drm] ring buffer = 0xe0000000
    (II) intel(0): [drm] mapped front buffer at 0xe0100000, handle = 0xe0100000
    (II) intel(0): [drm] mapped back buffer at 0xe5600000, handle = 0xe5600000
    (II) intel(0): [drm] mapped depth buffer at 0xe6a00000, handle = 0xe6a00000
    (II) intel(0): [drm] mapped classic textures at 0xe7e00000, handle = 0xe7e00000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (**) intel(0): Option "MigrationHeuristic" "greedy"
    (**) intel(0): Option "EXANoComposite" "false"
    (II) EXA(0): Offscreen pixmap area of 62914560 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x05600000 (pgoffset 22016)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x06a00000 (pgoffset 27136)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x07e00000 (pgoffset 32256)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x019fffff: front buffer (25600 kB) X tiled
    (II) intel(0): 0x0077f000: end of stolen memory
    (II) intel(0): 0x01a00000-0x055fffff: exa offscreen (61440 kB)
    (II) intel(0): 0x05600000-0x069fffff: back buffer (20480 kB) X tiled
    (II) intel(0): 0x06a00000-0x07dfffff: depth buffer (20480 kB) Y tiled
    (II) intel(0): 0x07e00000-0x09dfffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000: end of aperture
    (II) intel(0): using SSC reference clock of 96 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0): Pipe A is on
    (II) intel(0): Display plane A is now enabled and connected to pipe A.
    (II) intel(0): Pipe B is on
    (II) intel(0): Display plane B is now enabled and connected to pipe B.
    (II) intel(0): Output VGA is connected to pipe A
    (II) intel(0): Output LVDS is connected to pipe B
    (II) intel(0): Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): using SSC reference clock of 96 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 211
    (EE) intel(0): underrun on pipe A!
    (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
    (II) LoadModule: "synaptics"
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 0.99.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.99.2
    (**) Option "Device" "/dev/input/event9"
    (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
    (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
    (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
    (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    (**) Option "SHMConfig" "True"
    (--) AlpsPS/2 ALPS GlidePoint touchpad found
    (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
    (--) AlpsPS/2 ALPS GlidePoint touchpad found
    (II) config/hal: Adding input device Video Bus
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.5.3, module version = 2.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.1
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event8"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Video Bus: xkb_model: "evdev"
    (**) Option "xkb_layout" "br"
    (**) Video Bus: xkb_layout: "br"
    (**) Option "xkb_variant" "abnt2"
    (**) Video Bus: xkb_variant: "abnt2"
    (II) config/hal: Adding input device PS/2 Mouse
    (**) PS/2 Mouse: always reports core events
    (**) PS/2 Mouse: Device: "/dev/input/event7"
    (II) PS/2 Mouse: Found 3 mouse buttons
    (II) PS/2 Mouse: Found x and y relative axes
    (II) PS/2 Mouse: Configuring as mouse
    (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
    (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
    (II) config/hal: Adding input device Microsoft Microsoft Trackball Optical?
    (**) Microsoft Microsoft Trackball Optical?: always reports core events
    (**) Microsoft Microsoft Trackball Optical?: Device: "/dev/input/event5"
    (II) Microsoft Microsoft Trackball Optical?: Found 5 mouse buttons
    (II) Microsoft Microsoft Trackball Optical?: Found x and y relative axes
    (II) Microsoft Microsoft Trackball Optical?: Configuring as mouse
    (**) Microsoft Microsoft Trackball Optical?: YAxisMapping: buttons 4 and 5
    (**) Microsoft Microsoft Trackball Optical?: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Microsoft Microsoft Trackball Optical?" (type: MOUSE)
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event11"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Video Bus: xkb_model: "evdev"
    (**) Option "xkb_layout" "br"
    (**) Video Bus: xkb_layout: "br"
    (**) Option "xkb_variant" "abnt2"
    (**) Video Bus: xkb_variant: "abnt2"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event10"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Video Bus: xkb_model: "evdev"
    (**) Option "xkb_layout" "br"
    (**) Video Bus: xkb_layout: "br"
    (**) Option "xkb_variant" "abnt2"
    (**) Video Bus: xkb_variant: "abnt2"
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
    (**) Option "xkb_model" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_model: "evdev"
    (**) Option "xkb_layout" "br"
    (**) AT Translated Set 2 keyboard: xkb_layout: "br"
    (**) Option "xkb_variant" "abnt2"
    (**) AT Translated Set 2 keyboard: xkb_variant: "abnt2"
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11673 )
    AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11674 )
    AUDIT: Thu Dec 25 02:18:51 2008: 11649 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=11675 )
    (EE) intel(0): underrun on pipe B!
    xorg.conf
    Section "Module"
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga"
    EndSubSection
    Load "freetype"
    Load "GLcore"
    Load "glx"
    Load "dri"
    Load "int10"
    Load "vbe"
    EndSection
    Section "Device"
    Identifier "Intel GMA X3100"
    Driver "intel"
    BusID "PCI:0:2:0"
    Option "DRI" "True"
    Option "NoDDC" "True"
    Option "AccelMethod" "exa"
    Option "MigrationHeuristic" "greedy"
    Option "ExaNoComposite" "false"
    Screen 0
    EndSection
    Section "Monitor"
    Identifier "Failsafe Monitor"
    Vendorname "Generic LCD Display"
    Modelname "LCD Panel 1280x800"
    Horizsync 31.5-50.0
    Vertrefresh 56.0 - 65.0
    modeline "1280x800@60" 83.46 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
    DisplaySize 336 210 # 96 DPI @ 1280x800
    Gamma 1.0
    EndSection
    #Section "Monitor"
    # Identifier "Monitor externo"
    # Vendorname "Samsung"
    # Modelname "917p"
    # Horizsync 31.5-50.0
    # Vertrefresh 56.0 - 65.0
    # modeline "1280x1024@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
    # DisplaySize 339 271 # 96 DPI @ 1280x1024
    # Gamma 1.0
    #EndSection
    Section "Screen"
    Identifier "Default Screen"
    Device "Failsafe Device"
    Monitor "Failsafe Monitor"
    Defaultdepth 24
    SubSection "Display"
    Depth 24
    Modes "1280x800@60"
    #Modes "1280x1024@60"
    Virtual 2560 2048
    EndSubSection
    EndSection
    Section "ServerLayout"
    Identifier "Default Layout"
    screen 0 "Default Screen" 0 0
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    Option "RENDER" "Enable"
    Option "DAMAGE" "Enable"
    Option "XFIXES" "Enable"
    EndSection

    ichbinesderelch wrote:have you tried using xrandr? xrandr -q shows available outputs, xrandr --output outputadapter(like VGA) --mode 1280x1024, as far as i can see, virtual monitor is set high enough that this should kinda work!
    Yes, I tried xrandr:
    $ xrandr --newmode "1280x1024" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
    $ xrandr --addmode VGA 1280x1024
    $ xrandr --output VGA --mode 1280x1024
    $ xrandr --output VGA --right-of LVDS
    At first this didn't work at all, so I tried to mess with screen resolution applet and got output on the second monitor, but not at the desired resolution.
    I tried running these commands again and got output on the second monitor, but at the wrong resolution. The strange part is that the resolution I want is listed by xrandr:
    $ xrandr -q
    Screen 0: minimum 320 x 200, current 2304 x 800, maximum 2560 x 2048
    VGA connected 1024x768+1280+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1280x800@60 60.0 +
    1360x768 59.8
    1024x768 60.0*
    800x600 60.3 56.2
    640x480 59.9
    1280x1024 60.0
    LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
    1280x800 60.0*+
    1024x768 85.0 75.0 70.1 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    640x480 85.0 72.8 75.0 59.9
    720x400 85.0
    640x400 85.1
    640x350 85.1
    TV disconnected (normal left inverted right x axis y axis)

  • Can Second Monitor Play VLC Videos?

    I use a mid 2012 Mac Pro; run Mavericks.  I plan to use my TV as a second monitor.  I know that I have to use AppleTV to connect wirelessly to my TV.  Will AppleTV allow me to play "VLC" videos?

    virwill wrote:
    Tried with Firefox and the AdBlock disabled. It went a step further -- on Safari, the video button just disappears -- but just got a black screen. Please forgive the clunky replies, but when I reply to the specific comment, I get an error message. When I use advanced editor, it plunks the reply down here, as if I'm replying to my own question.
    Sounds like you have "other" issues, perhaps a corrupt cache file.
    Backup your data off the machine just in case and disconnect all drives, then run all of OnyX's maintenance and cleaning aspects and be sure to reboot at the end.
    See how that works for you, like giving your OS X a enema.
    http://www.titanium.free.fr/

  • 2007 iMac, upgraded to Mavericks, second monitor now intermittently blinking

    2.4 Ghz Core 2 Duo, 4 GB Ram. ATI Radeon HD 2600 Pro graphics.
    Upgraded from Snow Leopard here at work, running dual monitors via DVI cable. Never a problem previously.
    Upgraded to Mavericks. Enjoying it. Until the 2nd monitor (Acer v223w) started intermittently blinking.
    Kinda befuddled. Can't find any answers. Any help?

    Same issue here and its really killing me. 
    When I disconnect the second monitor from the iMac and plug it back in, the blinking stops for a little while. But then it starts up again.
    It seems to blink more when I'm using Chrome (latest version 30.x) with multiple browser windows accross both displays.
    iMac 20-inch Early 2008
    ATI Radeon HD 2600 Pro 256 MB
    Mavericks 10.9
    Second monitor HP w2207 connected with DVI cable and adapter.
    Under Mission Control system preferences, I have Displays have separate Spaces unchecked, disabling the new Multiple Displays Mavericks feature.
    Hope that hleps.

  • Dock Not Showing on Second Monitor

    Dock is only showing on one of two monitors in setup - when I click to second monitor, it doesn't show up as it has in the past. On Friday after install, it was. Setting somewhere? Any insight is appreciated.

    This could be a bug.
    Could you test with Firefox's use of hardware acceleration disabled? There are two way to do that:
    (1) Temporarily run Firefox in its Safe Mode<br>
    (2) Turn off the setting in Firefox's regular mode.
    For #1:
    You can restart Firefox in Safe Mode using either:
    * "3-bar" menu button > "?" button > Restart with Add-ons Disabled
    * Help menu > Restart with Add-ons Disabled
    ''Not all add-ons are disabled: Flash and other plugins still run''
    After Firefox shuts down, a small dialog should appear. Click "Start in Safe Mode" (''not'' Reset).
    Your non-private windows and tabs should be restored (unless you have Firefox set not to save any history).
    Any difference?
    (To return to normal mode, exit Firefox and start it again normally.)
    For #2:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    This takes effect after you exit and start Firefox the next time.

Maybe you are looking for

  • Dashboard Error in OBIEE 11 g

    Hi ALl. I am getting this error when i was viewing the report in OBIEE 10 g i able to see the report but in OBIEE 11 g the same i am getting below error Please help me to solve this issue. Logic Error: PreKnownMetadataTable was accessed before result

  • TextField on ios is above the displaylist

    I created form that uses several TextFields of "input" type and while those behave fine on Android on IOS, when I select textfield its "native" part shows up above the display list, so whenever i scroll my form under other parts of the application it

  • About Editor Extensions

    In this thread - Re: SDK Schemas have moved - but where? a new question was asked about Editor XML Extensions. Nice thing about the XML for editor extensions is that they are almost identical to SQL Developer Reports. So if you want to write one, sta

  • My iBook has lost its brain........

    Hi all. Last night my ibook suddenly decided not to boot up. I get a screen that shows a blinking question mark alternating with the 'mac face,' both superimposed over a folder icon. i was able to boot with diskwarrior, but nothing shows except the d

  • Adding an item in Basket

    Hi, I'm currently using ISA 4.0 SP10 with R/3 as a backend. I wrote a custom basket refresh class and in it I need to write a function that will add an item to the current basket. I did something like this: ItemData myitem = basket.createItem();