Disabling Security Tab in OIM SelfService page

Hi All,
How we can disable Security tab(OIM Self Service page-->Profile-->Security) in OIM Self Service Page.
please give any idea.

Try modifying the Self.jspx in this folder:
C:\Oracle\Middleware\Oracle_IAM\server\apps\oim.ear\iam-consoles-faces.war\pages
Regards,
Sunny

Similar Messages

Rgearding disability of tabs on a lead page

Hello everybody,
Is there any possibility to disable the tab buttons on a lead page. For example on the lead page there are 3-5 tabs which displays like " Convert",Reject"...etc
Please do the needful, its very urgent.

Hi Subbu,
these are settings in the Role Management settings
Admin - User Management and Access Controls - Role Management - edit a particular role in step - 5: Privileges
uncheck the below privileges:
• 'Archive Leads'
• 'Convert Leads'
• 'Qualify Leads'
• 'Reject Leads'
save your changes, you may have to log out and back in for these to take effect.
Thanks,
Royston

Restrict to View AD objects security tab in ADUC (Dsa.msc)

Restrict to View AD objects security tab in ADUC (Dsa.msc) ?

In the Group Policy window
please navigate to User Configuration -> Administrative
Templates ->
Windows Components -> Windows
Explorer and open Remove Security tab
The Default state
is Not Configured and Security
tab is Enable
To Enable Security tab select Disable
To Disable Security tab select Enable
MD Disclaimer: The opinion expressed herein are my own knowledge. Deploy this at your own risk. Whenever you see a helpful reply, just click on “Propose As Answer” / “Marked As Answer” and please do "VOTE".

HT5312 I am trying to reset security questions but the advice tells me to click on a tab saying reset security questions on my id page and there is nothing there that says that!

am trying to reset security questions but the advice tells me to click on a tab saying reset security questions on my id page and there is nothing there that says that!

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(94431)

Forms personalisation - Vendor Form - How to Disable a Tab Page

Hi,
I am not a Forms 6i/9i programmer, although I have an appreciation of the concepts and can look at forms in Form builder. I have been looking at forms personalisation and have used it to execute plsql via the built in 'execute a procedure'. I can also see how to disable blocks, or items, but I haven;t managed to disable a form tab page i.e. On the vendor form there are tabs for GENERAL, CLASSIFICATION etc.
I have tried using the object type Tab Page, but the poplist doesn;t list any tab pages. Also if you choose Canvas, the list of Canvases appears but generates errors when you try and use the form (complaining of tab page ids).
I understand that to disable a tab page programatically, you would use SET_TAB_PAGE_PROPERTY i.e. in a forms trigger or in CUSTOM.pll
I would have thought Forms personalisation could do this.
Any ideas would be appreciated
mark
I under

What you can do is hiding the tabs (see pic below) and force the active tab programmaticily
Hope this helps
Message Edité par TiTou le 09-20-2006 10:35 AM
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"
Attachments:
Clipboard01.png ‏151 KB

HT5364 Safari is not displaying the web page content & Crashes on clicking Security Tab in Preferences!

I have Mac 10.8.4 with Safari 6.0.5.
Safari is not displaying the web content but images on the web page are being displayed.
Although the webpage is loaded, but nothing is shown else than Images. When I hover the mouse on the blank webpage shown, the cursor changes on the links on the web page.
I tried resetting the preferences from the menu as well as deleting the Preferences of Safari from ~/Library/Preferences/ but nothing helped.
When I open Preferences of Safari & click on Security tab, It Crashes!!
Thanks,
Shubhi

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Adding Custom Tab in OIM 11g Self Service Page

Hi All,
I have to add a custom tab in oim self service page and when i click on that tab it should show two tab like "Search Resource" and "User Info" and when i click on "Search Resource"
it should show Resources list and when i click on User Info tab it should show the all the attribute of user.
Please help me how i can do it.
thanks,

For OIM 11g R2, we don't have any composer and all. You need to understand the OIM UI then you need to proceed with Customization.
Steps:
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/oim/oim_11g/customize_oim_ui_selfservice_tabs/customize_oim_ui_selfservice_tabs.htm
Pointers: http://docs.oracle.com/cd/E23943_01/doc.1111/e14309/uicust.htm#BABIGCJA

How disable a tab page

Hi to all,
In a Form I have a Tab canvas with 4 Pages.
When I run the form, I need that only the first Tab is enabled.
I have tried, placing in the Form WHEN-NEW-FORM-INSTANCE trigger the code:
Set_View_Property('MY_TABPAGE2', ENABLED, PROPERTY_FALSE) ;
But when I run the form the page 2 is still enabled.
Please how can obtain the desidered result ?
Thank You and Best Regards
Gaetano

excuse me i copied your statement
right is:
SET_TAB_PAGE_PROPERTY
ex:
SET_TAB_PAGE_PROPERTY('CANVAS77.P_FORNITORI', visible, property_false);Scusa di nuovo
Regards

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

Can't open the security tab in options

When I click on tools, options, and then the security tab, it does not open the security options. Every other tab works, just not security. The screen stays on whatever option I am on, and does not change to show me security.

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I can not click certain tabs on my Etsy page & they will not open using Firefox, but I am able to open these tabs on Etsy when using Internet Explorer

When I am signed onto Etsy, there are certain tabs on the top of the page that I can not click open when using firefox, but when I use Internet Explorer, I am able to click open these tabs. The following tabs on my etsy page will not open: Your Shop, Your Account, Help, & Sign Out
Other tabs on the same page will let me click them open, such as:
Buy, Sell, Community, Blog, Mobile, when using Firefox & Internet Explorer

Both the Yahoo! Toolbar extension and the Babylon extension have been reported to cause an issue like that. Disable or uninstall those add-ons.
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Firefox is suddenly not remembering or filling in any of my passwords. All of the appropriate boxes are checked in the options/security tab, but it won't remember any passwords and shows none saved. How do I get it to remember and fill in my passwords a

Firefox is suddenly not remembering or filling in any of my passwords. All of the appropriate boxes are checked in the options/security tab, but it won't remember any passwords and shows none saved. How do I get it to remember and fill in my passwords again?

Do you mean names and passwords in the Password Manager or do you mean that you are no longer logged on to (remembered by) websites after closing and restarting Firefox?
If the latter happens then you have a problem with cookies that are not kept or the file that stores the cookies is corrupted.
Websites remembering you and automatically log you in is stored in a cookie that you must allow: Tools > Options > Privacy > Cookies: "Exceptions"
Make sure that you do not use [[Clear Recent History]] to clear the 'Cookies' and the 'Site Preferences'.
Make sure that you not run Firefox in [[Private Browsing]] mode.
In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing
See also http://kb.mozillazine.org/Password_Manager (Troubleshooting)

Why cant I find an add-on to open a new tab in my home page on Firefox 5?

I have been able to open a new tab in my home page (Google in my case) in all of the other versions of Firefox. I am a loyal user but this is frustrating. I cannot locate an add-on for this feature. Is there something out there?

You can use one of the following IF you also install the Add-on Compatibility Reporter, below (the developers need to update one line of their code to make them compatible with Firefox 5).
*http://sogame.awardspace.com/newtaburl/
*https://addons.mozilla.org/en-US/firefox/addon/777
The following Add-on adds a "Compatibility" button in your Add-ons > Extensions that you may need to click after installing it and restarting Firefox.
*Add-on Compatibility Reporter: https://addons.mozilla.org/en-US/firefox/addon/15003
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.

Tab control with 2 pages

I want to create a Tab control with 2 pages, in each page there are 2 buttons - "OK" and "Cancel".
If on Page1, "OK" is clicked, Page2 will be disable and greyed, until "Cancel" is clicked. And vice-versa for Page2 buttons.
How to do this?
Thanks in advance...
Solved!
Go to Solution.

Hi Splee,
Please view the attached vi, I believe it's doing what you've asked. You can invoke properties using property node in order to change the value of variables.
Hi Simply_me check your Vi will it really works. To make this VI in working condition you have to do some more coding in your code.
Check your page selection technique.
Hi Splee,
First you have to find out on which Tab Page user clicking the buttons, the all operations you have to do on other page.
Once your page is disable you can't access the controls of that page. As Geeta says make a code using event structure with Tab Control property and invoke nodes.
You have to do some coding to achieve your requirements.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!

No security tab in form options of Adobe designer

Hi, I am new at using Adobe designer in a SAP netweaver environnement.
I have a problem because I cannot set the security options in the designer because I have not got the security tab in the options.
Has this ever happened to any of you ?
I have allready serched the forums but have not found anything related to this issue.
Thanks in advance,
Nicolas.

Hi Nicolas
this is information you need to set on the SAP side of the integrated solution.
In Web Dynpro for Java, one of the properties of the InteractiveForm UI element is 'enabled', which by default is set to 'true', i.e. by default it generates an interactive PDF form.
In transaction SFP in ABAP, the form interface contains a property called 'fillable', which is disabled by default (because the transaction was built with a focus on high-volume printing requirements), and needs to be set in your program if you want to generate an interactive form.
All this is described really well in the documentation, for example, for NW 2004s: http://help.sap.com/saphelp_nw04s/helpdata/en/37/47a2be350c4ac8afe36b691203971f/frameset.htm
Remember, the form generation in SAP happens on the server (ADS), not in Acrobat.
Hope this helps,
Markus

Disabling Security Tab in OIM SelfService page

Similar Messages

Maybe you are looking for