Disabling session management in BlazeDS

I am relatively new to BlazeDS. We are mainly using RemoteObject service of BlazeDS and server side code is not using any sessions.
Is it safe to assume that application is going to work fine if it put on multiple web servers and a HTTP load balancer is used. I saw on this post that disabling session management can not be done if message service is used but as I mentioned we are using Remote service only.
If disabling session management is fine then can you pls. elaborate how to disable it on BlazeDS.
-Amit

Similar Messages

Ep session manager

Hi,
How to disable session manager in ep iviews.How to turn it off.
Path is support desk----sap applications
please let me know how to turn it off.
Thanks,
Manu

Manu,
Have a look at this
Re: "Session management will not work, Please check DSM log file"
Reward points if handy!
Regards,
Sandeep Tudumu

Hello, I have a big problem with Firefox: Session Manager & Undo Closed Tab addons are not working, Sync Is not working. History is working. How to fix this?

Firefox remembers history but doesn't remember closed tabs, sessions.
It happened after updating Fox to v. 19.0.2 on one computer.
In Firefox Options is set Use Custom Settings For History, everything is checked except Always Use Private Browsing Mode. So I am not in private browsing.
When I press on Undo Closed Button nothing happens & in session manager Save Session Button is greyed out. I've tried installing other add-ons that can remember tabs. tried to disable/reinstall these 2 add-ons. Did't help. On my 2nd computer I have same add-ons, same settings and they are working normally. on 3rd computer undo closed tabs works also. How to fix this? I decided to ask before doing Firefox Reset...
Sync is a separate problem. It works, but quite often it logs me out of Sync account. Then I can log in only using long recovery key and password (choosing option I don't have device with me because it does not accept keys for pairing device.)
Thanks for reading.

I have exactly the same settings in Options (in both computers)
for history, these 2 add-ons and all other stuff in Options. The only difference is that on 1 pc sessions can be saved and closed tabs can be reopened, on other main pc they stopped to work. + no any other add-on that does similar things works on this pc.
It is also interesting that I can reopen closed visited sites from History Panel, but not by pressing the Button. For now I only manually bookmark links to a temporary folder.
Recently (some 2 month ago) I pressed x and Firefox closed all tabs without saving them without displaying save & quit pop up.
so I changed 4 settings in about.config
browser.tabs.warn on close true
browser.warn on quit true
browser.warn on restart true
browser.show.quit warning true
but the problem with sessions appeared only 1 week ago.
So I guess the problem is not with the History settings or other settings. Seems that something responsible for button or for storing info about tabs/sessions got corrupted. :(

How to permanently turn off the Session Management alert

Hello,
I have a certain iView that is working through https.
Whenever I go to this iView I receive this pop up:
Session Management will not work!
You can turn off this alert inside 'Support Desk' -> 'SAP Application'
I am turning this alert off and I don't see it anymore but after we are doing a server restart it is turned on again and again I need to turn it off.
How can I turn this alert off permanently, even after a server restart?

yes its all a bit strange isnt it ...... the AlertSessionManagementMismatch appears to be runtime in nature - in that if you disable the session management alerting using the support desk approach - this value becomes false. Yet a restart doesnt keep it at false.
What I discovered is - IGNORE what you see when you edit the service - change it physically to FALSE (even if it says false) and save it. This will persist it at the next restart.
Haydn

Win 7 "Desktop WM Session Manager" stopped by FW CS5

Whenever I start Fireworks CS5 it stops my "Desktop Window Manager Session Manager" thus disabling Aero in WIndows 7.
Any clues on how to prevent this from happening??
Everything seems to work fine elsewhere (Photoshop, InDesign, Illustrator) just Fireworks has a problem.

This seems like an older issue.
http://superuser.com/questions/26195/issue-with-fireworks-8-on-vista-windows-7-and-aero
Can someone please comment if they have this happen also.
Is there some kind of work around that anyone knows of?

Trouble with Session Management

I am trying to assess how many people I lose on my site
because they dont have cookies enabled. when I disable cookies in a
browser and <cfoutput> a urltoken, it prints out a new value
every time I refresh the page, as expected. But when I try to log
the CFID when people come to my home page so that I may pass it
around through the site, I get some "element CFID undefined in
session" errors

thanks for the help. I thought Id tell you more about what I
am doing and see if you have comments - we use google to market our
company so clicks are costing us big bucks. currently, our sites
rely on session management to operate, so I realize that folks
having cookies off is really hurting us. All the references I can
find tote passing the session.URLToken around the site to make it
cookie independent. I havent done this yet, first im trying to get
a handle on how many people have cookies off (like you are), and
where people are coming from to see if we are having click fraud
(which we are very suspicious of).
Is this what you would do (passing the URLToken around)? Any
other comments you have would be very much appreciated.

Session manager is taking 10% of the total response time

Hi
As per our recent analyses session manager is taking around
10% of the total response time, we have done the archiving of data
however it still taking around 9% of the total response time, I have checked few notes from service market place. However i would request you to suggest something
sap notes
164102
203617
161053
26417
203924
My system configuration
SAP System ID WCP
SAP Component ECC 5.0
SAP Release ERP 2004
Database System Oracle 10.2.0.4
Operating System Windows Server 2003 on x86_32, AIX 5.3,
Windows Server 2003 on x86_64
Thanks in advance
Regards
Rizvi
+919874428887

Hi,
first check the user nodes from PROFGEN_CORR_REPORT_5 (from SE38)
Here you can find the user nodes for all users, and disable user nodes if any user had high utilization.
Please check SAP Note 203617
Regards
Nick Loy

Lync 2013 integration with Avaya Aura Session Manager 6.3

Dear All,
we are planning to integrate Lync 2013 with Avaya Aura Session Manager 6.3 and Avaya
Communication Server 6.3.1 for one of our client.
As per the technical documentation from MS, it shows the integration with lync 2013 with Avaya aura session manager
6.3 and Communication Server 1000 (CS1K).
Please let me know is there any difference between Communication Server
1000 (CS1K) and Avaya Communication Server 6.3.1.

Hi,
From the link below of “Infrastructure qualified for Microsoft Lync”: Aura Session Manager 6.3 is supported with Lync Server 2013.
https://technet.microsoft.com/en-us/office/dn788945
Configuration Notes:
1.Media Bypass, RTCP, and History-Info were set to Enabled.
2.REFER and Session Timer were set to Disabled.
Known Limitations:
1.With Media bypass enabled in Lync, for an incoming call to Lync client that has simultaneous ring to a number with early media enabled, caller will hear ring back instead of the early media.
2.Avaya Aura communication manager does not send disconnect to PSTN via ISDN trunk while receiving SIP 603 response from Mediation server for incoming call to Lync client. Caller will hear overflow tone and call will not disconnect until caller drops the
call.
What’s more, it is better to contact IP-PBX vendor for the installation and set up as they have the complete documentation.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

Disable session cache

Hi,
How to disable session cache for particular reports
thanks

Hi,
I would like to know, what you are referring to as 'Session Cache' here. I think you are referring to the presentation server cache, which can be managed by tags in the instanceconfig.xml or you could by-pass in completely during analysis creation with the 'By Pass Presentation Services Cache' setting.
Instanceconfig.xml tags are as follows:
<ServerInstance>
<Cache>
<Query>
<MaxEntries>100</MaxEntries>
<MaxExpireMinutes>60</MaxExpireMinutes>
<MinExpireMinutes>10</MinExpireMinutes>
<MinUserExpireMinutes>10</MinUserExpireMinutes>
</Query>
</Cache>
<ServerInstance>
Let me know, if I got you wrong here.
Hope this helps.
Thank you,
Dhar

JMStudio Error "Can not create session manager"

Hi,
I'm trying to transmit an mpg file through a simple pc to pc network, using the transmission wizard in the JMStudio, and everytime it causes a "can not create session manager" error, even when I try to transmit .mp3 file
I'm using an ip like 100.100.0.1 for the sender machine, and 100.100.0.2 for the receiver machine, and I don't know where is the problem
thanks in advance

Um,maybe the port that you use for transmission is already occupied.
Make sure that you are not using JMStudio to transmit streams while trying to receive streams from the same port.

What is new with MAX 2.0 and is it compatible with Session Manager?

We added non-IVI instrument information in, basically the same structure as for IVI instruments,
into the ivi.ini file to keep all instrument information in the same place. Using MAX Version 1.1 caused no problems whatsoever and the system worked fine. With the advent of MAX 2.0 you seem to use ivi.ini as well as config.mxs to store instrument information. What we have found now is that given a working ivi.ini file from MAX 1.1, we end up with 2 or 3 copies of all the devices in the IVI Instruments->Devices section! When the duplicate entries are deleted and the application exited, the
ivi.ini file is updated minus the [Hardware->] sections which contain the resource descriptors that our appl
ications look for. As an added complication, under MAX 2.1 (From an evaluation of the Switch Executive) It behaves the same, except that it almost always crashes with one of the following errors. 'OLEChannelWnd Fatal Error', or 'Error#26 window.cpp line 10028 Labview Version 6.0.2' Once opened and closed MAX 2.1 will not open again! (Note we do not have LabVIEW on the system.) What is the relationship between the config.mxs and ivi.ini now? Also, your Session Manager application (for use with TestStand) extracts information from ivi.ini and may expect entries to be manually entered into ivi.ini (e.g. NISessionManager_Reset = True) i.e. Is the TestStand Session Manager compatible with MAX 2.0?

Brian,
The primary difference between MAX 1.1 and 2.x is that there is a new internal architecture. MAX 2.x synchronizes data between the config.mxs and the ivi.ini. The reason you're having trouble is that user-editing of the ivi.ini file is not supported with MAX 2.x.
Some better solutions to accomplish what you want:
1. Do as Mark Ireton suggested in his answer
2. Use the IVI Run-Time Configuration functions. They will allow you to dynamically configure your Logical Names, Virtual Instruments, Instrument Drivers, and Devices. You can then use your own format for storing and retrieving that information, and use the relevant pieces for each execution. You can find information on these functions in the IVI CVI Help file located in Start >> National I
nstruments >> IVI Driver Toolset folder. Go to the chapter on Run-time Initialization Configuration.
I strongly suggest #2, because those functions will continue to be supported in the future, while other mechanisms may not be.
--Bankim
Bankim Tejani
National Instruments

Session management problems with SSO

Hi all-
I've been getting an Apex app tied to SSO as a partner app (per http://www.oracle.com/technology/products/database/application_express/howtos/sso_partner_app.html). So far, it sort of works. If I go to my apex app, it redirects me to SSO, where I authenticate and end up back in the apex app. Great. Here are two problems I've run into:
1. If I am already authenticated to SSO, and I go to my apex app (url like: http://host/pls/apex/f?p=101:1), my browser goes into an infinite redirect (url like: http://host/pls/apex/f?p=101:1:::::FSP_AFTER_LOGIN_URL:\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|||||FSP_AFTER_LOGIN_URL|\f?p=101|1|||||FSP_AFTER_LOGIN_URL|\f? p=101|1|\\\\\\\\\\\\\\\\\\\). To resolve, I have to clear cookies.
2. If I am using my apex app, then log out of SSO (in another browser window), I can still click around in my apex app (i.e., apex thinks I'm still authenticated).
Anyone have any thoughts? I'm wondering if I need to do something in page session management (under authentication schemes) to fix #2, but I have no clue about #1.
Thanks
Rob

Hi Scott-
Thanks for the info on #2 - I'll work on that after I get #1 sorted out, since it's the more dire problem. Here's some more info:
Apex version = 3.0.1.00.08
SSO SDK = ssosdk902.zip
I set it up as "My Application as Partner App." I used "MY_PARTNER_NAME" as SSO Partner Application Name. In the list of SSO Partner Apps on the SSO Admin page, my partner app name is also MY_PARTNER_NAME. It gives the following info:
Login URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_login
Single Sign-Off URL: https://sso_host/pls/orasso/orasso.wwsso_app_admin.ls_logout
Home URL: http://apex_host/pls/apex
Success URL: http://apex_host/pls/apex/RBLICK.YOUR_PACKAGE.PROCESS_SUCCESS
Logout URL: http://apex_host/pls/apex
RBLICK is the schema owning the apex app. In there, I created a package called YOUR_PACKAGE:
create package YOUR_PACKAGE as
procedure process_success(urlc in varchar2);
end YOUR_PACKAGE;
CREATE PACKAGE BODY YOUR_PACKAGE AS
procedure process_success(urlc in varchar2) as
begin
wwv_flow_custom_auth_sso.process_success(
urlc=>urlc,
p_partner_app_name=>'MY_PARTNER_NAME');
end process_success;
END YOUR_PACKAGE;
Anything look obviously wrong to you?
Thanks!
Rob

What is the difference between Session timeout and Short Session timeout Under Excel Service Application -- session management?

Under Excel Service Application --> session management; what is the difference between Session timeout and Short Session timeout?

Any call made from the API will automatically be set to the “Session Timeout” period, no matter
what. Calls made from EWA (Excel Web Access) will get the “Short Session Timeout” period assigned to it initially.
Short Session Timeout and Session Timeout in Excel Services
Short Session Timeout and Session Timeout in Excel Services - Part 2
Sessions and session time-outs in Excel Services
above links are from old version but still applies to all.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Session management and java Web Service

Hi ,
Can I have two web services one based on Session bean and other on Simple java class, packaged into single ear file? Does NetWeaver supports web service session management/tracking? How can I get an handle to HttpRequest in my Web Service?
Any help will be appreciated.
Thanks in advance
regards,
rajinder

Container Managed Authentication. Does everything you need.

Session management in Info View with two different logins using single sign

There is a form with 2 user logins UserA and User B to redirect to infoview with sso in my application. I am able to go to each of the Infoview pages successfully but have the following problem.
User A logs in and infoview opens in a new IE window and sees his/her folders based on permissions and is able to do his/her work for the first time.
User B logs in andand infoview opens in a new IE window sees his/her folders based on permissions and is able to do his/her work for the first time.
After a while when User A tries to access the InfoView in the previously opened IE Window, he/she gets an error message. An error has occurred: The object with ID 2519 does not exist in the CMS or you don't have the right to access it.
User B is able to continue his/her work. Who ever logs in the last, he/she is able to continue his/her work but the other one gets an error.
Please let me know on how to address this issue . I added logonToken and tried everything at my hand but no success. Is this session controlled by business objects or by the jsp page. What more changes are required for my jsp page to fix the error. Attached below are the form and the applogon.jsp snippets.
 applogon.jsp
 IEnterpriseSession enterpriseSession = null;
 Exception failure = null;
 boolean loggedIn = true;
 String redirectURL = null;
 // If no session already exists, logon using the specified parameters.
 if (enterpriseSession == null){
 try{
 // Attempt logon. Create an Enterprise session manager object.
 ISessionMgr sm = CrystalEnterprise.getSessionMgr();
 // Log on to BusinessObjects Enterprise
 enterpriseSession = sm.logon(username, password, "cms", "secEnterprise");
 }catch (Exception error){
 loggedIn = false;
 failure = error;
 if (!loggedIn){
 // If the login failed, redirect the user to the start page.
 return;
 }else{
 // Store the IEnterpriseSession object in the session.
 session.setAttribute("EnterpriseSession", enterpriseSession);
 // Create the IInfoStore object.
 IInfoStore iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
 // Store the IInfoStore object in the session using the helper functions.
 session.setAttribute("InfoStore", iStore);
 // Store the CMS name for later use.
 session.setAttribute("CMS", "CMS");
 // Create the IReportSourceFactory object.
 IReportAppFactory reportAppFactory =(IReportAppFactory)enterpriseSession.getService("RASReportService");
 // Store the IReportSourceFactory object in the session using the helper functions.
 session.setAttribute("ReportAppFactory", reportAppFactory);
 // Retrieve the logon token manager.
 ILogonTokenMgr logonTokenMgr = enterpriseSession.getLogonTokenMgr();
 String logonToken = logonTokenMgr.createLogonToken("", 60, 100);
 String infoViewURL = null;
 String tokenParam = null;
 infoViewURL = "/businessobjects/enterprise115/desktoplaunch/InfoView/logon/logon.do";
 tokenParam = "token=" + logonToken;
 redirectURL = infoViewURL + "?" + tokenParam;
 // Retrieve a logon token and store it in the user's cookie
 // file for use later.
 Cookie cookie = new Cookie("LogonToken", logonTokenMgr.createLogonToken("", 60, 100));
 response.addCookie(cookie);
 // Store the logon token for later use.
 session.setAttribute("token", enterpriseSession.getLogonTokenMgr().getDefaultToken());
 // Redirect the user to the relevant tutorial page.
 out.println("You have been logged on to Enterprise.");
 response.sendRedirect (redirectURL);
Thank You for your help

// Retrieve the parameters that the user entered into the logon fields.
 user name and password come from here from the above html form into the jsp here. Ted Is this what you are asking for where does the username and password come from
 String username = request.getParameter("user");
 String password = request.getParameter("pass");

 IEnterpriseSession enterpriseSession = null;
 Exception failure = null;
 boolean loggedIn = true;
 String redirectURL = null;
 ISessionMgr sessionMgr = null;
 // If no session already exists, logon using the specified parameters.
 if (enterpriseSession == null){
 try{
 // Attempt logon. Create an Enterprise session manager object.
 sessionMgr = CrystalEnterprise.getSessionMgr();
 // Log on to BusinessObjects Enterprise
 enterpriseSession = sessionMgr.logon(username, password, "appserver.abc.com", "secEnterprise");
 System.out.println("line61");
 }catch (Exception error){
 loggedIn = false;
 failure = error;
 if (!loggedIn){
 // If the login failed, redirect the user to the start page.
 return;
 }else{ this code is in my first post

Disabling session management in BlazeDS

Similar Messages

Maybe you are looking for