Disabling subscription notification email for specific folders

Hi is it possible to disable subsription notification email for specific folders.
We have a custom application which sends notifications and hence do not want duplication of mails.
Thanks
rocky

Hi Rocky,
If these folders are in a separate repository, the subscription service can be disabled.(not configured) for this repository.
Regards,
Isvarya

Similar Messages

Permissions in Subscription notification email

Hi All,
I have enabled the subscription service for a KM folder and have assigned some users to it . These users have READ permission to this KM folder.But when these users receive a subscription notification email in that mail they have a link to go to details tab of a folder
But if user has only read permission for this folder , then they should not get a details link in subscription email .
How can we control this ?
Is it that we can control this only by service permissions for subscription ?
Kindly advice.
Thanks & Regards,
Amit Kade

Hi All,
Thank you for your help . Actually I was bit confused regarding the permissions and service permissions.
Vinod ,
Your answer was helpful , I have checked it using service permissions and it is working fine but still I have one doubt .
I have assigned subscription service permission ( unsubscribe only ) to these users. This means users should be only able to unsubscribe themselves and not subscribe or add anybody to the subscription.
But when these users receive the subscription email they still have 'edit subscription' link in their email .
Is it some kind of configuration issue or a bug ?
Kindly advice.
Thanks & Regards,
Amit Kade

How can I disable the notification sound for remaining credit messages

My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?

Zotan wrote:
My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?
If the message comes in the (bell) notifications it can only be switched OFF globally.
If it is a text message, you can create a contact with the number, then Setting - Notifications - Contacts - Customise - Phone Calls, Email Messages, Text Messages, Other Messaging

Single notification email for all users

Hi friends,
Is there any way of setting a single notification email for all users in oracle 11i so that all the notification email goes to that email address (for test purpose only)?
thanks in advance.
LISAN

See MOS Doc 562551.1 (Workflow Java Mailer FAQ ) and search for "override address". More details in MOS Doc 828812.1 (How To Stop Old Outbound Workflow Notification Email Messages During Clone Activity)
HTH
Srini

How can I disable automatic spell checking for specific websites?

I'd like to disable automatic spell-checking for specific domains, such as programming-oriented forums. Is there a way to do this in about:config?

See:
*https://developer.mozilla.org/en/Controlling_spell_checking_in_HTML_forms
You could create a Greasemonkey script to add a spellcheck="false" attribute or create a bookmarklet to add the attribute.

How to set up notification email for Full CPU utilization on OEM12c?

I have found a Oracle Doc,Is that's the way email notifications are setup?How can i check that after setting the notifications?
4.1.2.3 Subscribe to Receive E-mail for Incident Rules
An incident rule is a user-defined rule that specifies the criteria by which notifications should be sent for specific events that make up the incident. An incident rule set, as the name implies, consists of one or more rules associated with the same incident.
When creating an incident rule, you specify criteria such as the targets you are interested in, the types of events to which you want the rule to apply. Specifically, for a given rule, you can specify the criteria you are interested in and the notification methods (such as e-mail) that should be used for sending these notifications. For example, you can set up a rule that when any database goes down or any database backup job fails, e-mail should be sent and the "log trouble ticket" notification method should be called. Or you can define another rule such that when the CPU or Memory Utilization of any host reach critical severities, SNMP traps should be sent to another management console. Notification flexibility is further enhanced by the fact that with a single rule, you can perform multiple actions based on specific conditions. Example: When monitoring a condition such as machine memory utilization, for an incident severity of 'warning' (memory utilization at 80%), send the administrator an e-mail, if the severity is 'critical' (memory utilization at 99%), page the administrator immediately.
You can subscribe to a rule you have already created.
From the Setup menu, select Incidents, then select Incident Rules.
On the Incident Rules - All Enterprise Rules page, click on the rule set containing incident escalation rule in question and click Edit... Rules are created in the context of a rule set.
Note: In the case where there is no existing rule set, create a rule set by clicking Create Rule Set... You then create the rule as part of creating the rule set.
In the Rules section of the Edit Rule Set page, highlight the escalation rule and click Edit....
Navigate to the Add Actions page.
Select the action that escalates the incident and click Edit...
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/notification.htm#CACHDCAD

Make sure you have correct thresholds...
from target home>monitoring>"Metric and Collection Settings"
Check the incident rule for warning and critical events for host targets
Setup>Incident>Incident Rules

Notification email for workflow

I have configured the smtp server and also the email transport and channels and the channel orginators.Emails are sent for subscription service and also 'send to' works fine.
But the problem is that the notification emails are not sent to the approvers when a document is sent for an approval cycle.
I have also seen that the permissions for etc\notification folder is readonly for 'Everybody'
Please can any one tell what i am missing.

Hi Aamod,
Look at the permissions set for the /etc/notifications folder. The "Everyone" group (or at least, the roles for your users) must have read access on this folder which contains the xml templates for the notification e-mails. This could explain why content_admin and super_admin roles receive e-mails and others do not.
Also check the following links:
Notification By Mail
http://help.sap.com/saphelp_nw04/helpdata/en/89/c5fd430b63c74bbdfaa5f2ec9bb20b/frameset.htm
Email Notification
http://help.sap.com/saphelp_nw04/helpdata/en/41/080aab7cefe34d8acb04861a467efc/frameset.htm
I think this will help you.
Thanx & Regards
Anish

How to configure notification emails for reports output or alerts for all users in r12

Hi,
I need to configure notification emails. I have provided settings in OAM-> Workflow and SMTP IP address in settings and only Outbound. I am able to test for my user ID.
I want to know how to redirect emails or alerts for users like when a user runs a report he should get notification email in his outlook about the report output and details. In settings it only points for one replyto field. How do I mention all user ID's?
Regards,
Mohammed

Hi Mohammed,
You may check on XML bursting for XML based reports.
In addition, also see links:
http://oracle.anilpassi.com/email-output-of-concurrent-program-request.html
Anil: Oracle Apps Concurrent program Output as Email
Oracle ERP World: Email the output of a concurrent program as Attachment
Also see:
How to Redirect Output from Printer to Mail Message after Running Report (Doc ID 1036586.6)
Thanks &
Best Regards,

Notification Emails for User Administration

Hi all,
I'd like to configure the Netweaver system to automatically send out mails to users when the account is created using "Generate Password".
This system is a pure Java system and does not have the ABAP components and therefore I am not able to use the SCOT or RZ10 tcode to configure the SMTP.
I have went to User Aministration > Configuration > Notification Email and set the hostname there. It does not send out any mails. Am I missing any steps? Any help is appreciated.

The javamail has to be set in ConfigTool for Netweaver to send mails.

Offline folders exclusion list for specific folders

Hello
First at all i apologize for my english.
we are trying around with the offline folders with windows 7 enterprise (x64) and server 2008R2 standard.
The synchronisation was set by GPO and it works.
Today we got the task that the user should only be able to synchronize files and not whole folders (with subfolders and all files in it).
Is it possbile to set an option (like the exclusion list for specific file types) to exclude folders from synchronizing?
Kind Regards
Luca

> Is it possbile to set an option (like the exclusion list for specific
> file types) to exclude folders from synchronizing?
Short answer: No.
(ok, you can exclude shares from being avail offline, but that was not
your question :))
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Notification Email for UWL

Hi,
We have a requirement to send all UWL notification emails to Outlook Inbox of the users.
Is it sufficient to make the appropriate settings in
Syst admin>Syst Config>UWL>workflow>Mail
Are any other settings required?(Groupware transports,system creation etc)
Thanks
Rocky
P.S:Will reward points for helpful answers.

Hi rocky kurien ,
These websites may be useful for u:
Getting Started Using SAP Software
http://help.sap.com/download/documentation/additional/getstart/netweaver/GettingStarted_nw2004s_EN.pdf
How toIntegrate the BW Reporting Agent With the Alert Framework
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/031faa90-0201-0010-23b3-a5b88e812d15
New Forums in the SAP NetWeaver Portal
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204bb3bc-10ea-2910-448a-a780c63978cd
http://www.uisol.com/uisol/papers/UISO-PGandE_Paper_Distributech_2006.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

How to Disable Group Manager Tab for Specific OU(Organizational Unit)

Hi All,
How can i disable Group Manager Tab for particular OU(Organizational Unit) in OAM 10.1.4.0.1? Where should i configure to disable this particular stuff?
Can someone please give suggestions on this issue?
Thanks,
Ganesh

Hi Ganesh,
If you have many OUs under the searchbase that you want to include, but one that you want to exclude, then you could add a filter to the Group Manager tab (in Identity System Console/Group Manager configuration/Tabs menu item) like:
(!(ou:dn:=mygroup))
where mygroup is the ou that you want to exclude
Depending on your ldap sctructure, it may be more appropriate to add searchbases that you want to include rather than use filters to exclude those that you don't want.
Regards,
Colin

How to delete subscription of email for Nokia Mess...

I want to delete my email for Nokia Messaging. I dont want to be subscribed anymore.
PLS Help me
** Love Me **

http://www.google.ie/url?sa=t&source=web&cd=1&ved=0CBMQFjAA&url=http%3A%2F%2Femail.nokia.com%2Faccou...
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How disable subscription notifications to locked users?

Hi All,
We have some potal users locked (dont want to delete them at the moment).
Subscriptions notifications are sent to those users as well (at least admin notifications).
Is there a way not to sent subscription notification to locked users?
We have NW 7.01 SP3 Ep1.
Thanks.

HI Dimitri,
You can do but the process can be possible through manually so go to
Detail section -> Setting->Subscription-->Here you can cancel the subscription part
so that you cannot send any mail to that particular user or if the person already in a group so exclude them from the group so they should no longer to get the subscription as the same thing my friend said on previous forum messgae.
This will helpful to you.
Regards
RS

Notification emails for received web forms

Can I set these emails to display the customer's email address in the 'From' section of the email rather than my own so I can simply click reply in my email program?

Hi,
I tested using {module_emailaddress}and it worked. So under System Emails -> Workflow notification -> Email From Address: Please try to place "{module_emailaddress}" youremailaddress.
Test a webform and click on reply to see the customer's email address. Though it is not showing in the 'From' section.
Hope that helps!
Kind Regards,

Disabling subscription notification email for specific folders

Similar Messages

Maybe you are looking for