Disabling the control in a slide show

I am creating a flash slide presentation with my own buttons
to navigate through the slides. My question is how do I disable the
built in navigation so the user has to use my buttons instead of
the keyboard arrows or by clicking on the screen?

1. Activate "thumbnails" in the configuration panel
2. Select one Thumbnail.
3. Rightclick and choose "Select same"
4. Press "backspace"
5. Open the configuration panel and load the new images.

Similar Messages

How can I exchange all the images in a slide show with new ones

I have 18 slide shows each is a different competition for our camera club. How can I exchange all the images from each slide show with new images as our club competitions commence? I am reluctant to just delete the slide show because I will have set it all back up. I want to leave the size shape and format of the show as is, but just exchange all of the current images with new ones. I am hoping there is a quick way to delete and replace all images for each show? Each slide show has around 40 images and I have 18 shows
thank you for your help

1. Activate "thumbnails" in the configuration panel
2. Select one Thumbnail.
3. Rightclick and choose "Select same"
4. Press "backspace"
5. Open the configuration panel and load the new images.

How can I disable the control key?

How can I disable the control key?
My Controll-Key is permanently pressed.... i dont know why, please help me!

Take it to an Apple store or dealer to get it repaired.

Control Bar in Slide Show

7.1.3
Is there a way to get rid of the control bar which pops up anytime you move the mouse during the slide show? I am putting together an audio visual presentation with two laptops and a bunch of other stuff.
(video/audio mixer, stage lighting etc.) With a split screen I can run iPhoto/iMovie from either laptop on the "big" screen while controlling the sound from the laptop through the small screen....
Problem is, while the audience is watching the big screen, and I touch the mouse, the control bar shows up at the bottom of their screen......no good....
Thanks.

You're rather far beyond the intended uses of iPhoto there my friend. No there's no way to stop that menu appearing. You might be best to consider using a different application or export the slideshow as a Quicktime Movie. Alternative apps which might help are PhotoToMovie or PhotoPresenter, both of which integrate with iPhoto.
Regards
TD

Controlling Speed In Slide Shows???

Is there a way to control the speed in which the pictures move through the slide show? I feel that the initial setting is to quick.
White MacBook Core 2 Duo / Mac OS X v10.4 / 2GB RAM / 2GB iPod nano Mac OS X (10.4.9)

ligastar,
Cyclosaurus covered this for us back in October of last year:
Mark

Control icons on slide show

In photoshopCS3/web photo gallery, how can one add labels to the control icons on the bottom left of the slide show?

You will have to edit the HTML code or the linked source images/ Flash content thatz make up the buttons.
Mylenium

How do I add an image already in the page to a slide show ?

It seems so simple: I have a couple of images already spread out on a page, but later on I decide to collect them into a simple slide show after all. So I drag this Slide Show widget into place, and now ? Yeah, I know, I should use the button to select new images into it, or drag them as files from my Finder onto the Slide Show. But I already have them sitting on my page ! Isn't there a quicker and better way ? I tried copying and pasting in a lot of ways, and I can change the existing (three) sample images, but it's not even so easy to do it. Anyone ?
BTW, I know I could use Compositions, and at least they offer a simple + button to add extra instances to the widget. But I'd like to these plain vanilla Slide Show widgets in this situation.

Hi,
I used a blank slideshow, and then I dragged an existing image from the page and drop to the slideshow, it works absolutely fine, check this screenshot
is that what you are referring here, or did I miss anything

How to get the best iPhoto/Aperture slide shows on Apple TV

Hi. I'd like to do very simple slideshows on Apple TV 2nd generation for friends and family, but haven't been able to get it to work very well. My needs, I think, are simple:
No gimimick transitions, e.g. no Ken Burns. I don't mind an ultra-brief fade in/out, but that's about it. I found Classic, and that seems to work. I'm only mentioning it as it might have a bearing on the next two.
I'd like complete control over advancing slides using the Apple Remote, or the Remote app on the iPad. No auto-advancing. If we're all enjoying, talking about a memory, the last thing I want is that memory suddenly yanked away to the next slide. When I try to pause, it pauses the music instead of the slides.
I'd like the photos to have 720p resolution, which is what the Apple TV 2nd generation is capable of. All the originals are higher resolution (typically 3000 vertical, varying widths depending no how I've cropped), but sometimes the Apple TV decides to make them much grainier than one would expect from 720p. Other times they look fine.
Any help would be greatly appreciated!

No there is no way to Mirror full screen from an iOS device to the Apple TV. iOS devices are not 16:9 like your HDTV so the mirrored image appears as the size your iOS device would be if it were the size of your TV. Hope that makes sense.

Hello, I am have problems with coruption of the photos in a slide show after burning the DVD in iDVD. This coruption does not always appear when you preview the project. I have slowed down the burn rate to 1X and kept the quality to professional.

I am having a great deal of problems with Data coruption in slide shows after I have burned a DVD in iDVD. I have changed burn rate from best to 1X with no difference in the coruption. I have the quality set to professional with no improvement. The size of the project is near 3.95, so it should fit on a single layer burn. Should I use either iMovie to create the slide show or "Photo to Movie"? Also, can anyone comment on how I preserve the highest quality picture resolution with a slide show? If I do use iMovie or Photo to Movie, the file size should exceed the 4.2 size so, will I have to buy new DVD's which are capable to handle the double layer burn and upto 8 GB? What DVD's are recommended? Any preferred brand? Are there problems with burning with double layer? I read on this blog of numerous problems.

DVDs are LOW resolution by today's standards - only about 0.3 megapixels - so there is no way they your images on a TV set will look "High Definition". See Preparing images for iDVD slideshows at http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6675.html for recommendations on image sizes to use. Using larger images won't give you better quality, andf in some cases, will lower you image quality because the Quicktime resizing that occurs isn't the best.

How can I change the order of the photos in a slide show I have created on my iPad mini?

How can I change the order of the photos I have selected in a slide show on my iPad Mini?

Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

How do I match the timing of a slide show to the length of a song?

I have created a slide show, and now want to put a song to it. The way the slides are set up, the show ends before the song does. There has got to be an easy was to slightly lengthen the timing of the slides to fit the length of the song.

In the Slide Inspector palette, in the Start Transition dropdown menu, select Automatic, and in the Delay field, select the time you want the slide to appear.

Why can't I hear the audio for my slide show outside of PSE 9?

I have prepared a slide show with audio in Photoshop Elements 9. It plays fine within the PSE 9 viewer, both slides and audio. However, when I try to view it on Windows Media Player, the audio does not play, though the slide show does. I am also interested in playing the slide show on my TV through a DVD player. I have converted the slide show with audio to an avi format using Free Make to allow this. Again, the slide show plays, but the audio does not. Anyone have an idea of what I am doing wrong? Thanks for your help.

What codec is your audio encoded with—what is the extension on the file, and what bitrate is the audio? Some of this information might be visible if you do a right-click Properties -> Details on the file in Windows Explorer.
It sounds like PSE9 has a private codec that can play it, but the Windows system, in general, doesn’t have a codec to support it. AVI is just an envelope for the existing video and audio. If the audio is using a non-supported codec, then wrapping it in a AVI won’t help. The audio needs to be something more universal. I’d guess that a fixed, moderate bit-rate MP3 would be supported, whereas a FLAC or very high or possibly a variable-rate bit rate MP3 wouldn’t be as universally supported.

Adding a theme to the beginning of a slide show

I created a slideshow in IPHOTO and sent it to IDVD+6. I picked out the theme "kids showtime" and tried to add it to the beginning of the slide show. It has one drop zone. I put one photo in the zone. When I preview-the theme plays over and over. I want it to play once and then have the slide show start. Any help would be appreciated.

Any theme that has motion and music will repeat. No way to stop it after one cycle. And there's no way to automatically start the slideshow, unless you put it in the Autoplay well in Map... I don't think you want to do that.

How to batch disable the controls

In a lot of occassions of my program, I need to disable more than 20 controls and enable them later. Is there a way to disable/enable them in a shot so that I won't need to do that one by one? How about locking out the whole front panel?

You can get the refs of all the vi controls in two steps : ask first for a reference to the front panel, then for the refs of all the controls/indicators.
Then you will be able to enable or disable all the controls at once.
See the attached example (where there is something wrong... will you find what ?)
Have fun...
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Disable_controls.tif ‏15 KB

How can I disable the "Pause" button to not show up when I am in a phone call?

I want to disable the pause button as it got pressed every time my cheek touches the screen while in a phone call.
Any tip will be very much appreciated!
Martin

http://www.applevis.com/guides/voiceover-keyboard-shortcuts-mac-os-x
You should be able to copy them from there.

Disabling the control in a slide show

Similar Messages

Maybe you are looking for