Disabling the dbc security authentication

Hi All,
Apps : 11.5.10.2
DB : 9.2.0.8
When i am doing this "Disabling the dbc security authentication", i need to down the application services?is it compulsory to do this?
Enable SECURE authentication
jre oracle.apps.fnd.security.AdminAppServer apps/apps \
AUTHENTICATION OFF DBC=/u01/app/applmgr/11.5/fnd/11.5.0/secure/backendbox_sidname.dbc
And my environment is 5 node env
Do i need to run this command on all the node or any specific node to disable the dbc security.
Please update me ASAP
Thanks a lot

Can you pl clarify why you need to set this ? The preferred way of doing this would be via autoconfig - see MOS Doc 293609.1 (APP-FND-01542 when logging directly into forms via the f60cgi in 11.5.10). Stop all apps services, run autoconfig on the dbtier first and then on the apps tier servers.
HTH
Srini

Similar Messages

  • How to disable the annoying security warning for all users in Windows Server 2008 R2

    Hi,
    The employees from the administration complain all the time about the different types of security warning that they get when trying to run some applications which are used frequently.
    Since the number of the users is too big it is unfeasible to go through all the users and disable the User Access Control at their account settings.
    Is it possible to achieve this through given account policy settings. I want to perform the changes on the server so it applies to *all* (or maybe those of Administration department) users.
    One useful information here can be the following: we use 2 different severs, the application which cause the errors are in the terminal server, and the users are in the main server. Where should I perform the changes?
    Best,
    D

    Hiya,
    It could sound like that one indeed. There are a few options to go for, however it should be fairly easy to find out :)
    Create a test GPO and apply to a limited amount of users. GPUpdate and verify that the GPO has been applied using rsop.msc
    Then open the application to test and see if it has the desired effect. You might need to change more than one setting, depending on the application and desired behavior.

  • HT4623 My i phone was disabled due to "security" reasons. I reset my password, got confirmation, but I still get the message on my i phone and cannot update or purchase Apps.

    I woke up one morning and my i phone had a message for me: "your account is disabled due to security reasons". I follow the instructions to establish a new ID and password. It was confirmed on the i Phone, but when I try to download apps. or get updates it will not accept my ID/password which I have reset half a dozen times already.
    On the flip side, I can log on my MacBook Pro without any problems. Same ID/password combo.
    Technicians haven't been able to get this resolved. Any advice is highly appreciated.
    Maux47

    This Apple Help page provides contact information for various countries for security problems with an Apple ID:
    http://support.apple.com/en-us/HT5699

  • HT203512 I cannot sign into my iCloud account. It keeps saying your apple ID has been disabled due to security reasons, kindly reset your password. I have already changed the password twice but still Im not getting access.

    Hi, I am unable to sign in to my iCloud account. When i sign in, it says Your apple ID has been disabled due to security reasons. Kindly reset your password to log in. I have already reset my password thrice but am unable to access into my account even after using the reset new passwords. Can someone help me. This unfortunately is my primary email account and Im unable to access any of my emails

    This Apple Help page provides contact information for various countries for security problems with an Apple ID:
    http://support.apple.com/en-us/HT5699

  • Is there a way I can permanently disable the security lock thing in System Preferences?

    Aside from logging and using the root account on a daily basis, is there a way to permanently be rid of the security lock thing in System Preferences?
    Yosemite has a bug (?) where if an Admin account has its password set to blank (empty), you can't remove the security lock...
    You can click it, it'll ask for Username and Password (Why?), and when you click on 'Unlock', it unlocks for a brief moment and instantly locks itself again...
    This is beyond infuriating. Do advise.

    Thanks for taking the time to reply.  However I'm quite aware that the sleep/wake button disables the screen.  Unfortunately, mea maxima culpa, I sometimes accidentally hit shuttle before I've pressed the sleep/wake button, often when I am trying to do more than one thing at once.  Sometimes I accidentally hit shuffle at other times too,eg when waking up the phone. 
    This is especially exasperating when listening to classical pieces with multiple movements.  I will look for an alternative music player for the iphone, as I don't think the default music application and I are a good match.
    Thanks again,
    Tim Blackwell

  • WSUS Sync is not working Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. --- System.Security.Authentication.AuthenticationException: The remote

    I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
    This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
    server is configured on http port 80 
    ERROR
    Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
    according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
    I've checked proxy server connectivity. I'm able browse following site from WSUS server
    http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
    I did telnet proxy server on the particular port (8080) and that is also fine.
    I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
    Any tips appreciated !
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Hi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
    Your reply  ("SSL is enabled/configured, and the certificate being used is invalid
    (or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
    I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
    My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
    proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
    Any other hints where I can prove them it's a sure shot problem from their side.
    Thanks again !!
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

    Getting error code 1611 when trying to restore my Ipod. I have tried a forced restore and disabling my computer security and still nothing...ready to throw it out the window at this stage...help!!

    Error 1611
    This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.
    If you also unsuccessful on another computer then time for an appointment at the Genius Bar of an Apple store. It would see that your iPod needs service as specified in the article.

  • Weblogic security authentication; question to interact with the realm

    Hi, I have a quick question about weblogic security authentication....
    We are using weblogic 81sp3. We have user-group info in an Novell eDirectory LDAP server.
    Currently, a Novell Authenticator provider is configured under : Security > Realms > myRealm > Providers > Authentication This tells Weblogic from where to get the user and groups. Weblogic caches this information of the logged on users for certain time ( example : 60 secs ) after which it cleans the cache for all inactive users. We want to interact with the Weblogic cache. Add more user profile information to this cache and use it in our application .
    Does somebody know how to programmatically interact with Weblogic user-group cache - read , write , update and delete user-group info in cache and control time to live for the cache ?

    already checked
    TTLCache class which weblogic provides. But they seem to depracetd it
    help ?

  • HT1222 Security Update 2013-001 (Lion) may have disabled the DVI on my 17" MacBook Pro

    It looks like Security Update 2013-001 (Lion) may have disabled the DVI on my 17" MacBook Pro ... 2006 vintage ... it worked fine before the upgrade.  Tested port with HD monitor using an HDMI adapter that worked before. Thanks for the help!

    Thank you for the suggestion ... I repaired the disk ... repaired the permissions ... from the CMD+r restore partition ...
    No changes.
    I'm in the process of doing a Software Update scan ...
    Thanks for the suggestion ... hope there might be more ...
    I know these are supposedly never monitored by Apple ... but I can always hope!

  • When I turn on my computer I get the following error messages: Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings. Also for HP Trap Monitor.  How do I fix these?

    When I turn on my computer I get the following error messages:
    Insecure Startup Item disabled. "Library/StartupItems/HP IO" has not been started because it does not have the proper security settings.
    Insecure Startup Item disabled. "Library/StartupItems/HP Trap Monitor" has not been started because it does not have the proper security settings.
    How do I fix these?

    Library/LaunchAgents: com.promethean.activmgr.plist
    Library/LaunchDaemons: com.microsoft.office.licensing.helper.plist, com.promethean.activhardwareservice.plist
    Library/StartupItems: HP IO folder - HP IO, Resources, StartupParameters.plist
    HP Trap Monitor folder - HP Trap Monitor, Resources, StartupParameters.plist
    These are the system extension errors
    "/System/Library/Extensions/AppleGraphicsControl.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleMux Control.kext"
    "/System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/ApplePoli cyControl.kext"
    "/System/Library/Extensions/BJUSBLoad.kext"
    "/System/Library/Extensions/EPSONUSBPrintClass.kext"
    I do not know what any of these do or how to fix them.  I have run multiple disk permission repairs & disk repairs.  The startup & system extension errors continue to come up.
    I even followed the directions to move HP IO & HP Trap Monitor to the trash, run disk permissions repair, put back in folder, then restart - and still am getting error message.

  • Everytime I start up my MacBook Pro, I get this message.  'Insecure Startup Disabled.'  "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

    Everytime I start up my MacBook Pro, I get this message.  'Insecure Startup Disabled.'  "/Library/Startup items/HP Trap Monitor" has not been started because it does not have the proper security settings.

    Update your HP Printer drivers/software at their website or uninstall using the developers method.

  • I have a canon MX7600 multifunction printer. My security setting allow connection with the printer. If I disable the firewall it works fine. If the firewall is running I get a dialog box every time I print asking for permission. How do I fix this?

    I have a canon MX 7600 multifunction printer. Each  time I print I get a dialog box asking for permission to allow connections to the printer. This box stays on my screen for a few seconds, if I don't click allow I get a communication error which then requires me to delete the job and start over. I contacted Canon and proceeded with their suggestions to no avail. They now say it is an Apple issue. My security settings are set to allow connection to the canon printer. If I disable the firewall it works fine, once I enable the firewall the problem returns.  This issue is a royal pain. Any suggestions on how to fix it short of buying a new printer?

        jsavage9621,
    It pains me to hear about your experience with the Home Phone Connect.  This device usually works seamlessly and is a great alternative to a landline phone.  It sounds like we've done our fair share of work on your account here.  I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you.  I look forward to speaking with you.
    TrevorC_VZW
    Follow us on Twitter @VZWSupport

  • Disabling the Security Manager

    When the J2EE 1.4 refernce server is running with the Security Manager disabled the web based admin console stops working (some sort of JACC error),although asadmin seems to work fine. Which leads to a few questions :
    1. Is there a way to disable the Security Manager and use the web console ?
    2. Are there other downstream effects to running the server without the Security Manager enabled ? What other features can/will fail?
    Its nice to see Sun putting an emphasis on out of the box security, but using the Security Manager is a real pain during development and is overkill for alot of internal deployments.

    Hi,
    There is no mechanism to disable the SecurityManager in J2EE 1.4. JACC (JSR115) is a new spec that went into 1.4 that allowed for plugging authorization provider in the J2EE. This spec makes it mandatory for us to have the security manager on all the time.
    If you turn off the security manager, the web console should not work properly as it is a web app and has security permissions defined that are interpreted by our JACC provider.
    Downstream effects of running the server with security manager disabled, will mean that all checks that we have as part of the server policy will fail and ofcourse all applications that use authorization checks will fail too.
    We have spent considerable time from this release to improve the performance of the system with the security manager enabled. You should look out for the next release coming out that will have these optimizations.

  • How can I disable the Security Settings popup in Acrobat XI?

    We are currently using Acrobat X and are getting ready to upgrade to version XI. We dynamically set the security settings w/a button in the toolbar menu to secure documents. Works great. However, while testing the same functionality in version XI a popup always appears when this function is called. The settings are correct in the security setting popup but we do not need the popup to actually appear. Is there a way to disable the popup from appearing? It's confusing my users.
    Thanks in advance for your help.

    Adobe generally has quarterly updates for Acrobat/Reader. If they decide to fix this, I'd be surprised if it made the first one (January 2013?), so it would probably be more like April/July, but that's just a guess. When you submit the bug report, be sure to include how much this negatively affects your workflows and prevents you from upgrading.

  • HT5934 How can I disable the lock screen option. I do not want to punch in a multi-digit security code every time I need to use the phone

    How can I disable the lock screen option? I do not want to punch in a multi-digit security code every time I need to use the phone.

    System Preferences - Security & Privacy - unselect the box called Disable automatic login

Maybe you are looking for