Disabling the fragmentation monitor for SSDs but not for spinning disks

We are using SCOM 2012R2.  We have several servers and most of them have now been upgraded to use SSD drives.  The SCOM fragmentation monitor complains about their high level of fragmentation.  I would like to disable the monitor rather than
go and disable it individually for each of them, since there are about 40-50 of them.  But, I would like the monitor to remain working because we still have about 25 spinning disks left and would like to be alerted when these need attention.
Suggestions?
thanks, Rob Hutchison

Hi !
You have to set the "% fragmentation" and set the "Use OS Recommendation" to False, for a dedicated taget.
http://blogs.technet.com/kevinholman/archive/2009/09/28/new-base-os-mp-6-0-6667-0-adds-file-fragmentation-monitor-to-all-logical-disks.aspx
Hope this helps.
Note: This posting is provided 'AS IS' with no warranties or guarantees, and confers no rights. Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable. This helps the community, keeps the forums tidy, and
recognises useful contributions.

Similar Messages

  • I would like to disable the phone jack for my mac book pro, it is a disappointment that this feature is not currently accessible . hopefully it will be with the following os x system software up date but until then is there anyone that could help me ?

    I would like to disable the phone jack for my mac book pro,
    it is a disappointment that this feature is not currently accessible .
    Hopefully it will be added with the following os x system software up date.
    until then is there anyone that could help me ? please and thank you ...

    John Galt wrote:
    Have you checked System Preferences > Sound > Output?
    Or are you interested in a phone modem adapter?
    http://www.amazon.com/Apple-MA034Z-External-V-2-Modem/dp/B000C6TLDO/
    ds store wrote:
    It's a Ethernet port, not a phone jack.
    Two good points, in which case I believe the ethernet port can be disabled, (it can on my Pro);
    System Preferences> Network> Ethernet>.........
    Highlight the Ethernet option and click the gear icon at the bottom of the panel. There should be an option to, Make service inactive.....

  • Since Upgrading to Ios5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?

    Since i updated my Iphone 4S to IoS5 i cannot open my contacts! i have tried to disable the Icloud and still they do not open! anyone have any further ideas for me to try?

    Check the age of the files you wish to open.
    Keynote 6 (the latest you downloaded) will opne Keynote 5 (KN09) files but nothing earlier. For that KN5 will act as an intermediate format (you save KN4 and earlier as KN5), then KN6 can open the resultanr files.
    Make sure you have a backup of your original files, in case KN6 cannot replicate some of your earlier builds and transitions.
    Les

  • Since the new versiono of Firefox I can get into the TurboTax website as usual but not on one of the links for Its Dedcutable on line. But with Safari I can. Same with my Bank. Can;t open PDF statements

    Since the new version of Firefox I can get into the TurboTax website as usual but not on one of the links for Its Dedcutable on line. But with Safari I can. Same with my Bank. Can;t open PDF statements

    I also have the '''pdf''' problem on all web sites. In my opinion Firefox 4 & 5 are not and improvement over FF3. I also have this concern listed on the question page along with 48 others in one week.
    Win7 Home Prem., 64 bit.

  • How do I get the audio playback from the source monitor to work? I have the trial version of the latest premiere and the audio works in that but not cs6

    I have the trial version of the latest premiere and the audio works in that but not cs6

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    -especially your sound hardware, and the details of your video

  • Firewire 800 iMac as the TDM monitor for my MBA thunderbolt?

    Can I use my Firewire 800 iMac as the TDM monitor for my MBA thunderbolt? Will the thunderbolt to firewire adaptor allow this to work?

    If the iMac is a 21-inch model, it's not available that way but is with a product such as ScreenRecycler.
    If the iMac is a 27-inch model, use a Mini DisplayPort to Mini DisplayPort cable.
    (98822)

  • How can I disable the notification sound for remaining credit messages

    My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
    I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?

    Zotan wrote:
    My operator sends me a message after every call and text which tells me what remains of my monthly allowances. This is very useful and I don't want to turn it off. I've just got myself a Z10 and the only thing that annoys me about it is that I have not yet found out how to disable the notification sound for this type of message. The device is stock with the latest firmware and no apps.
    I can change the notification for normal text messages in the settings, but there is no obvious entry to change for these messages. Does anyone know how to do it?
    If the message comes in the (bell) notifications it can only be switched OFF globally.
    If it is a text message, you can create a contact with the number, then Setting - Notifications - Contacts - Customise - Phone Calls, Email Messages, Text Messages, Other Messaging

  • What is the best Monitor for Video editing & Graphic Design?

    Hi every one,
    I would like to find out what is the best monitor for video editing and graphic design that you recomend, I am trying to buy one but not sure which one is good and not expansive.
    Thanks very much

    I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
    John,
    That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
    If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

  • In Lion 10.7.x I cannot disable the Lock documents for 2 weeks in Time Machine! Thus it prevents to change anything else like the system preferences or other settings. How I can disable it?

    Hello, In Lion 10.7.x I cannot disable the Lock documents for 2 weeks in Time Machine! Thus it prevents to change anything else like the system preferences or other settings. All is locked. How I can disable it?

    Do you mean the check box isn't enabled?
    Or you remove the check but it doesn't "stick"?
    Or you remove the box but documents are stil getting locked?
    That setting doesn't apply to other things in System Preferences, just apps that support AutoSave and Versions.  If you're having a problem with System Prefs, please clarify exactly what.

  • I would like to detect all the keyboard key is okay, but not every key can be detected by using LabVIEW example, keyboard keycode

    I would like to detect all the keyboard key is okay, but not every key can be detected by LabVIEW example ( we can use 『basic input demo.vi』to detect normal key』.
    I want to detect some 『hot key』 for example some keys exist in the upper part like 『search key』、『e-mail key』、『volumn control key』...etc. They are very often to be watched in some new keyboards, but we still don't know how to detect if their functions are okay.
    Can we detect signals of these 『hot key』 in LabVIEW? We can apply these hot key's functions in XP, so we should detect their signal, I think, but I can't do it.
    I serach some information about this question, and somebody said we can detect hot key's signal by grabing 『keybode』 these hot key feedback. But I don't know how to do these. I can't use VC. So anyone can give me a LabVIEW VI to grab keycode? Or any other solution we can detect all the key on the keyboard, including hot keys?
    Thanks!
    Regards,

    Maybe that is the limitation of Acquire Input Data.vi.The vi can't identify the Unformal key.
    You can try to use Event structure and set to listen "key down" event.
    There are two terminals VKey, ScanCode will sent out the information when you press key.
    There are two pictures in attached file, 2.jpg will show you the detail.
    Good luck.
    Attachments:
    SpecialKey.zip ‏17 KB

  • Did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.

    did download OS X Mountain Lion and see the features in my applications, but not reflecting in my APPS purchases.
    also this takes huge amount of time, almost 10 hours to download, even using 3G Net connection.

    Hi kiwirudy,
    I've had the same problem more than once since I started trying to download my 14 April purchase of OS X Mountain Lion.
    I found a property list called manifest.plist in my ~/Library/Application Support/AppStore folder which had a Boolean property called failed checked. I unchecked it and afterwards I was able to resume my download.
    Here are some steps I've found useful:
    Close the Mac App Store.
    make a copy of the  ~/Library/Application Support/AppStore folder. For some strange reason the Mac App Store likes to just delete it in some circumstances, which will mean that one has to start one's download again from the very beginning.
    Double click on the manifest.plist in one's ~/Library/Application Support/AppStore folder.
    This should open it in Property List Editor.
    Expand all the nodes (holding down the alt key and clicking on the highest collapsed node should do it.
    Find a key called failed of type Boolean and uncheck it.
    Save the manifest.plist and close it.
    Open the Mac App Store.
    The red message "an error has occured" should now be gone and one should be able to resume one's download.
    In the event that the ~/Library/Application Support/AppStore folder gets deleted:
    start the download again (it will start from the beginning), pause it and close the Mac App Store.
    copy your backup copy of the pkg file back to its sub-folder (it's a numbered folder in the ~/Library/Application Support/AppStore folder).
    Open the Mac App Store and resume your download.
    It should continue from where it left off.
    This has worked for me so far. I'm holding my breath. Don't know if I'll still be alive when it's finished.
    Regards
    Nic
    Message was edited by: n c h

  • Newbie: XML/Java - The entity "rsquo" was referenced, but not declared.

    I get the following error when I try to run my java program(it's supposed to read an xml file and print out some of the content).
    How can I fix this problem?
    Thanks,
    [Fatal Error] subject.xml:4:233: The entity "rsquo" was referenced, but not declared.
    org.xml.sax.SAXParseException: The entity "rsquo" was referenced, but not declared.
    at com.sun.org.apache.xerces.internal.parsers.DOMParser.parse(Unknown Source)
    at com.sun.org.apache.xerces.internal.jaxp.DocumentBuilderImpl.parse(Unknown Source)
    at javax.xml.parsers.DocumentBuilder.parse(Unknown Source)
    at DomParserExample2.parseXmlFile(DomParserExample2.java:42)
    at DomParserExample2.runExample(DomParserExample2.java:24)
    at DomParserExample2.main(DomParserExample2.java:115)
    Exception in thread "main" java.lang.NullPointerException
    at DomParserExample2.parseDocument(DomParserExample2.java:54)
    at DomParserExample2.runExample(DomParserExample2.java:27)
    at DomParserExample2.main(DomParserExample2.java:115)

    The easiest way to fix your problem is to not put unreferenced entities into the document. That just makes the document be not well-formed. If somebody else gave you that document, send it back to them and tell them to fix it. If you made it yourself, then you did it wrong. It's hard to say how you did it wrong because you didn't say anything about that.
    If you were hoping for some Java code, there isn't any. If you get an XML document which isn't well-formed, all you can do is to reject it. And that's what happened there. It's the correct thing to do.
    That tutorial you linked to is correct as far as it goes, but in your case you've just got some HTML which somebody carelessly reformatted into XML. You don't want to write an EntityResolver for HTML entities, you either want them to not be there, or for there to be a DTD at the beginning which points to something declaring them.

  • When I use the search I can find the bookmarks i've saved, but not in which folder among my many they are

    So I have tons of bookmark folders with tons of pages in each folder now at random times (do to unintended myself actions or whatever) i lose a folder that was in a specific hiearchy of other folder. I do a search for a site i know was in that folder it shows me all the sites in that folder but not where the heck that folder is in my heirarchy.
    when it's big it's a pain to look for it and when i do even 4 times over still cant find them

    There is an extension you can install which adds a "Parent Folder" column in the Library dialog (Ctrl+Shift+b). It has an option to show the full path instead of just the parent folder.
    https://addons.mozilla.org/firefox/addon/show-parent-folder/

  • When I make a video with the camera ipad mini seen but not heard I can do ?

    when I make a video with the camera ipad mini seen but not heard I can do ?

    Yeah, of course you can. All you do is, open PhotoBooth, record your video and then, once you have stopped the video recording just drag the movie out of the bottom of PhotoBooth onto the desktop. It is in .mov format so you can then add it to iMovie for further editing or just upload it to youTube as it is.
    Easy as pie!

  • How can I fetch the deliveries which are PGIed but not invoiced.

    Hi
    I want to search for the deliveries for which post goods issue has been done but are not invoiced.
    Kindly guide with you valuable comments.
    Regards,
    Satish.

    Hi,
    Use the T.Code:VF04.
    Goto T.Code:VF04
    Enter the Sold-to-party.
    Select Delivery related tick mark and uncheck all.
    Execute.
    It will give all the deliveries which are PGIed but not invoice.
    Regards,
    Krishna.

Maybe you are looking for