Disabling the live/multi update in the z77a-gd65 bios

I see a lot of stuff saying to use the board's bios app to update the bios.  BUT I see nothing about disabling the bios update in the bios utility of the mb's bios.
How to disable the auto-"update".  It happened again today where turning the power on, the screen goes blank, reboots showing multi-bios updating & not to turn the power off.  The problem this is the 2nd time & the bios "update" is from my 10.5 to 10.3B4; so is there a difference & is 10.3B4 really the "latest" bios version....From the reading I've seen so far, is that one needed to have the bios on a fat/fat32 drive which I don't have as a hard drive; I do have fat32 flash drives which weren't even plugged in when the bios got changed!
What happened?  The bios update wasn't within windows as the boot process never got that far.

1: your computer could have downloaded last time it was on a BIOS update via live update if installed and flashe 1 chip but not the other and the board was trying to flash the 2nd with the same bios on the other chip!
2: could be you have had a corupted BIOS chip and the board was trying to flash the bios from the other chip to the defective one!
is your computer working fine now?
do you have live update on your computer? (if its working remove live update as its got a 50/50 chance of corrupting your bios if it messes it up)
ps: do a CMOS clear >>Clear CMOS Guide<<

Similar Messages

Maybe you are looking for

  • HP LaserJet Enterprise 500 color M551dn - Optional USB Device port

    Hi, I'm hoping to buy the optional wireless print server (HP Jetdirect 2700w USB Wireless Print Server J8026A). There is one problem though, the optional USB device port seems to not exist on my printer. I only notice that the USB logo is present whe

  • HTTP logs not created when using software load balancer

    This is my setup: 1. I have a server running a software load balancer - call it A 2. There are two servers clustered under A - call it X and Y 3. I am able to access the application deployed on X and Y through A. Fail-over also works. Shutting down X

  • Dragging masked layer to larger document has a 1 pixel leak at mask edges

    Happens on Mac/PC since I can remember, wondering what others experience or do. Paint a mask to remove background. I use a brush 100% hardness. Drag this layer (eg: scalloped)  into a larger document You get a faint line of pixels (thin white line) a

  • White balance doesn't match CR2 EXIF colour temperature after import?

    Why does Lightroom make it's own choice of white balance for "as shot"? My CR2s from both a 40D and previous 350D all exhibit a shift in colour temperature compared to the EXIF data. It's not even consistent and a sequence of shots can visibly differ

  • DFS-R File Replication Authorative Restore

    Hello, There are several articles such as this one that show how to overcome a journal wrap in Server 2K8 and 2K12 using authorative restore: https://support2.microsoft.com/kb/2218556?wa=wsignin1.0 But these articles focus on SYSVOL, nothing about re