Disabling VIew source property in IE
hi
I am working on an ADF application. There is a requirement to disable the view source property of the IE browser so that the users cannot view the source. Is it possible to do it?
Please reply
Thanks
Hi,
not from ADF. You need to check with IE if there is an option to achieve this.
Frank
Similar Messages
-
URGENT : Disable View Source in EP Pages/Iview
Dear EP Specialists,
Pls let me know how to disable view source code in EP pages/Iviews.
We are at EP 6.0 SP12.
Pls treat this urgent.
Thanks a lot !
Josh.Hi,
I dont think that is possible.. on the lighter side i think the EP framework generates source which is tough to decode )
refer:
1. http://www.devwebpro.com/devwebpro-39-20030428Is-Someone-Stealing-Your-Source-Code.html
2. http://www.experts-exchange.com/Web/Web_Languages/HTML/Q_20661699.html
Hope that helps.
Regards,
S.Divakar -
Hi All,
I have a cube in which i'm using the TIME DIM that i created in the warehouse. But now i wanted a new measure in the cube which is Average over time and when i wanted to created the new measure i got a message that no time dim was defined, so i created a
new time dimension in the SSAS using wizard. But when i tried to process the new time dimension i'm getting the follwoing error message
"Errors in the high-level relational engine. The data source view does not contain a definition for "SSASTIMEDIM" the table or view. The Source property may not have been set."
Can anyone please tell me why i cannot create a new measure average over the time using my time dimension? Also what am i doing wrong with the SSASTIMEDIM, that i'm getting the error.
ThanksHi PMunshi,
According to your description, you get the above error when processing the time dimension. Right?
In this scenario, since you have updated the DSV, it should have no problem on the table existence. One possibility is that table has been specified for tracking in the notifications for proactive caching, but isn't available any more for some
reason. Please change the setting in Proactive Caching into "MOLAP".
Reference:
How To Implement Proactive Caching in SQL Server Analysis Services SSAS
If you have any question, please feel free to ask.
Best Regards,
Simon Hou
TechNet Community Support -
Hi,
Anyone know that how could I disable the html source code, so
no one can right click and view source code.
Thanks
DavidHi,
Anyone know that how could I disable the html source code, so
no one can
right click and view source code.
Thanks
David
There are methods that will disable the right click, but then
what do
you do for those people that go to the 'View' menu and select
'Page
Source'? Or those who use the CTRL-U? Or those of us who have
tools
like firebug that allow us to inspect the source both before
and after
it has been rendered.
In other words you can not really do what you want to do,
which is hide
your HTML source. The system just does not allow it at this
time. -
How can I turn off word wrap in the View Source output?
I'm trying to extract HTML from Word and one way to do that is to save the Word file as a .htm file and then View Source in a browser and copy that. But the words are wrapped in the View Source file. I want each paragraph to be all on one line. Is there a setting for the View Source feature that will turn off word wrap?
Once I have that done and copied into a plain text editor, I will use Search>Replace to get rid of all the stuff Word puts there and just end up with the simple paragraph tags at the end of each paragraph, all on one line.You can disable wrapping and syntax highlighting in the View menu in the Edit > View Source window.
-
View source doesn't work / is broken / not working in 6.1.0.1
View source in IE6 works on the guest users mypage when they first land on the site and on the login page, but any other community page once you login - it breaks.
I'm having to use the 'view partial source' in my right click context menu as offered once you install 'webdevaccess.exe' (a developer plugin unsupported but offered by Microsoft - google it) to see any source. I must admit, I just ctrl-a then 'view partial source' and I get everything but the initial <html> and <head> tags pretty much - but it's a pain.
Has anyone else seen this behavior and is there a fix?It appears that this is indeed a problem with certain versions of IE6 while using server-side compression for all portal pages (a new feature on ALI 6.1 that is enabled by default).
The Release Notes actually contain two known issues related to this:
- Some versions of IE6 on Windows 2000 have a bug where they do not render compressed pages properly. End users should upgrade to the latest version of IE6 if compression is enabled. (Issue #54230)
- You may experience issues downloading Excel spreadsheets from Analytics reports using the Microsoft IE6 browser. (Issue #54827)
This problem is directly related to one or more of the following bugs in IE6 SP1 resolved by the KB articles listed below. Please require users to either upgrade their browsers by installing IE6 SP2 or patching with the specific downloads listed in the KB articles.
http://support.microsoft.com/kb/871205
http://www.microsoft.com/downloads/details.aspx?FamilyID=0c7055c3-0bec-4042-b6aa-3443739c66ab&DisplayLang=en
http://support.microsoft.com/?kbid=823386
The other workaround is to specifically disable compression for Excel spreadsheets in the httpcompression.xml setting file, located in %PT_HOME%/settings/portal.
I upgraded to MSIE 7 and did not encounter the problem. I also confirmed that the problem does not occur with IE6 when HTTP compression is disabled. This is now controlled by a new httpcompression.xml file.
John -
Disabling View due to DA_E_NO_SUCH_ATTRIBUTE
I got the following error everytime when I Click Enable or Refresh operation on Connector view.
Pls help. thanks
DA_E_NO_SUCH_ATTRIBUTE
[2003/07/28 17:33:21.88 -0500] 13825:281912 1 Log a479003d <MV:CV2> Disabling View due to error DA_E_NO_SUCH_ATTRIBUTEHi,
we have been running the setup since August. We did not encounter any problem until recently.
And there is no changes to existing mapping rules and attributes flow rules.
Just wondering could it be due to changelog not in sync? Our external source is a oracle 9i server. -
How to disable "View Report" button in reporting services
Is anyone know how to disable "View Report" button in reporting services, I know can do custom code in report properties, what is the code? I have tried something like this ***button1.enable=false, but it can not success.
Appreciate if anyone can reply me, thanks.Hi,
The message box don't work on the web because it is of windowform box. Based on your further description, you might want to do the date parameter validation. If so, there is common way to do this:(assume the date parameter value inputed can't be less than 2007)
1) Intert a textbox and input the message used to show the end users if they input a invalidated date value for the parameter, and then set the textbox's hidden property to =iif(Year(Parameters!myPrameter.value) < 2007,false, true)
2) Insert a Rectangle control below the textbox created in step 1, and put all report items in it and set the Rectangle's hidden property to =IIF(Year(Parameters!myParameter.value)<2007,true,false)
After these, if the end users input the date value can meet the project requirement, the report will show the data the end users want, otherwise, the end users will see the error textbox to tell them the parameter value is incorrect.
Hope this help,
thanks,
Jerry -
View source is broken. nothing happens when i try to view source on any website.
plus
when i tried to make a new topic that didn't work either:
Please confirm your question ("view source" does nothing) at the link below:
https://support.mozilla.com/questions/749801/confirm/dlFjeoOZFW
Sorry, we couldn't find the page you were looking for. Please, try searching our site using the form below.
Enter your terms in the form below and click SearchThe [/questions/749801 other topic] does work (it's locked now).
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
<br />
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
<blockquote>Locking duplicate thread.<br>
Please continue here: [/questions/749802]<br>
Thanks - c</blockquote><br>
When I right-click on a webpage and left-click "view page source" nothing happens. Yes, I have tried view source on a wide variety of sites and none of them work.
Thanks for any help provided.The [/questions/749801 other topic] does work (it's locked now).
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).<br />
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]<br />
<br />
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.<br />
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.<br />
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
View source without loading page
I have Javascript off. The page I want to see starts to load, then it redirects to an error page saying I cannot use the site at all unless I turn on Javascript. After this, I don't trust them enough to let them run their Javascript on my machine.
Thanks - I think that's what I was looking for. But it doesn't work here.
I typed
view-source:http://www.auburnschl.edu/pages/Auburn_School_Department/About_Us/Auburn_s_Vision
and it changed to
view-source:http://www.auburnschl.edu/'''resolver/2496178368.20480.0000/route.01/'''pages/Auburn_School_Department/About_Us/Auburn_s_Vision
and Firefox said
The page isn't redirecting properly
Firefox has detected that the server is redirecting the request for this address in a way that will never complete.
This problem can sometimes be caused by disabling or refusing to accept cookies. -
Would like to know is any options are available to disable viewing the sou
I would like to know is any options are available to disable viewing the source of the page that sent to the browser using any technique
Thanks & Regards
SudheeshFirst i need to clarify
The JSP/struts source files are NOT visible to the client.
The HTMl source and javascript is visible to the client.
to protect javascript use things you can find with
http://www.google.be/search?hl=nl&q=Javascript+obfuscator&meta=
to protect HTML i have no idea
In response to:"I will be highly obliged if you support me with your valuable advice and information to resolve it..."
Then give out dukes, thats why the dukes system is put inplace for. -
How can I edit an html file in Firefox using View Source?
I have created an html webpage and saved it to my pc. I can't edit the html file in firefox when I right click on the page and select "View Source". I can view the code but I can't edit it. I can do this in IE9.
I thought I was able to do this before in Firefox.
Did my settings change somewhere that I can no longer do this?
Do I have to have something checked in the Web Developer extensions for it to work?
I'm using Firefox 24.0
Thank you for any help with this. :)The View Source window in Firefox cannot be used to change computer codes. Nor can the Web Developer tools.
Sorry for any inconvenience.
I suggest using Programmer's Notepad. -
HTML code displays on one line in browser view source
Hi,
In Dreamweaver, my HTML code displays returns, spaces, etc. However, in the view source option in a browser (Firefox in particular), all the code is displayed on one single line. I only found about this because I was having problems with my Google Ads not displaying. (A Google customer service person helped me to find a workaround for this since I still haven't figured how to get my code to display correctly.) So I have gone to Preferences in DW and changed my Code Format Line Break type. The result is the same with each of the three options: the code is all on one line when you check it under view source in a browser. (The server is Linux.)
Does anyone know how to fix this? Also, I think I know how this happened in the first place. I copied my code to TextEdit for a quick backup the other day, and then I pasted it back to DW. Bad idea? Is the only way to get the code back to normal to re-write it in a new HTML file in DW?Pssh. Problem solved, but I'm not quite sure how. I did go back and try to clean up some redundant CSS and other things, but the HTML/CSS validator still shows that I have this one invalid <header> tag (www.nextmontenegro.com), but since that was written as part of the DW template, I just left it. Weird. Anyway, the code flows down the page now.
Thanks for the quick replies and helpful hints:-) -
Is it possible to disable "View in Place" in Apple Mail?
Trying to type an email with a massive pdf or jpg blocking my view is a bit annoying, as is needing to right click and hit "View as Icon" every time I add an attachment. Is it possible to completely disable "View in Place"?
Yes, I know it. I replaced the default transferhandler
with my own. I have two JLists, I need to disable the
drop component in the first JList and the the drag
component in the second one, so I can only drag items
from the first list to the second one, and not the
other way around. Is it possible?Of course it is... if you had read the tutorial you wouldn't ask for it, but here are useful links:
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JList.html#setDragEnabled(boolean)
http://java.sun.com/j2se/1.4.2/docs/api/javax/swing/JComponent.html#setTransferHandler(javax.swing.TransferHandler)
I hope it will make sense now,
Regards.
Maybe you are looking for
-
Basic question is why are any of the minimun 8 Verizon reps that I or my Authorized Verizon Rep (at Costco) spoke with unable to resolve a very simple, straightforward issue that should have been resolved in 15 minutes max. Instead I (a 14 year veri
-
Preview 4.2 search bug?
I used to be able to easily search a parts catalogue using older versions of Preview. Now when I put same number in to Preview 4.2 the matching string does not show up even though it's in there - instead I have to scroll through endless search result
-
Nikon D90 RAW format not recognised even with latest updates
Hello, I just tried to import RAW pictures from my new D90 on my Mac (recently installed Leopard, with latest combo update + Aperture update) but it doesn't recognise the format. I can see thumbnails, and JPEG pictures are working fine. I also tried
-
HI - Usually shake reduction works (as much as it does) but I'm trying it on an image with one person moving in hopes of correcting it a bit. Image doesn't even show up on the screen in Shake Reduction. Just a blank and then a window opens which says
-
Flash player 12 not playing with FF, Chrome
We are using an embedded flash player in our site http://www.vobolo.com . With the auto upgrade of Flash player ver 12, the player has stopped working. With downgraded ver 11.9, things are working fine. Issue: When you click on the play button, the r