Disallowing Pr commitment or budget limit block at the PR level

Hi gurus,
Hope this thread finds you in a good condition. my issue is we have a project created as an internal order. Further we have a budget of lets say 10000 usd assigned to it and ofcourse the commitment is active for the order and the order type.
Lets assum i create my first PR for 7000 USD and since i have the internal order assigned in the Pr the 7000 USd becomes a commitment.
Againi go back and try to create a another PR for 4000 USD the system throws an error message saying Budget exceeded which is fair as my Budget was for 10000 USD.
i thought of trying to run the same process mentioned above by deactivating the commitment management in the order type and seems the system would not check the budget limit while creating a PR for an amount more than the budget amount and even allows to create PR whch is also fine with me but what horrifies me is , it even post a migo (GR) for the Same Po without checking the budget limit.
Dear Friends
I would like to know if there is a hope where the system can ignore the budget limit exceeding at the PR level and saves the Pr. further while if a PO is created for the same PR can the system at this point block the user from processing the PO if the budget limit exceeds.
waiting for your replies

Hi ,
I kind of tried that part and turns out the system does not refer to the budget limit in a PO and even while processesing a GR if the PO and the GR contain reference to the same PR. Hence does not fulfill my requirement
Regards and thanks

Similar Messages

Hi, While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed? Thanks!

Hi,
While installing XQuatrz-2.7.7, the installation blocks at the "destination" level. It asks how to install this soft, "Install for all users" is shadowed, but frozen: i cannot select anything and move on. Any idea how to get that fixed?
Thanks!

It says above 2 relevant and 1 correct answere available .............
I'm new here so could anyone direct me to these answeres?

Billing block at the customer level.

I have defined a billing block and have assigned that block to a customer for a particular sales area. After that I created an order for that customer. I was assuming that the Billing Block field on the sales order will be populated with the block I assigned at the customer level. But that is not happening. Am I missing some step or is this the standard process, that the billing block assigned at the customer level will not appear on the sales order and this comes into picture only when I try to create the invoice?

Hi Ginu
Billing Block will not worked if you did not assign it
Define the possible block indicators in SM30 - V_TVFS
and
allocate them to the billing types concerned in SM30 - V_TVFSP.
Your Billing Block will not worked if you did not assigned it to the desired billing types.
You can auto block by :-
1. sales document type in transaction VOV8, fields Billing Block,
or
2. item categories in SM30 - V_TVAP, by filling the fields Billing Block.
Reward if useful to u

Block cash sales with credit limit blocking from creation of outbound

Hello everyone,
Can you please teach me how to block cash sales with credit limit blocking from creation of outbound delivery? Currently, outbound delivery can not be created only for charge sales with credit limit block. Problem is, we can not confirm the cash sales. We have to delete first the outbound then unblock the S.O. before creating a new Outbound.
Thanks in advance.
Ridgy

Cash sale transaction will not have credit limit block, as the transaction is based on receipt of immediate payment. But if you still want to try the same, configure a 'Z' transaction Type for cash sale (Copy of Cash Sale - Sales Order Type) and maintain Credit check field as 'D' and try the scenario.
Ideally there should not be a Credir Check foe a Cash Sale Scenario.
Regards,
Rajesh Banka

Mass delivery block in the sales order

Hi
Is there any way to remove the delivery block at the itel level in the sales order using the mass.
I have some thousand of sales orders with the delivery block at item level.
please let me know, this is urgent requirement.
Thanks
Aravalli

Dear Aravali
If I am correct, you cannot assign delivery block in sale order at item level, but can assign Reason for Rejection at item level. Only at header level, delivery block is there.
Nevertheless, if you want to remove the reason for rejection, go to MASS, input BUS2032 and execute. There select [Sales Order Item Data] and click on Fields. Select the field MASSVBAP-ABGRU and execute. Give the required sale orders which you wanted to change and execute. You can change and save so that the block will be removed at item level.
Alternatively, if you are referring to field [LIFSK] in that case also, select Sales Order Item Data and click on Fields. There choose the field MASSSDHEAD_S-LIFSK and execute. Make the required changes and execute.
thanks
G. Lakshmipathi

Removing invoice block at line-item level

Hello SAP gurus
I've been asked by a client to create a way to delete invoice blocks at a line item level via workflow. The workflow sends a workitem for each blocked line-item that the invoice has. What I need to do now is create custom code that will delete a single line-item block instead of removing the block at the header level. This header-level block deletion will only occur when all the line item blocks are cleared.
I know there are a few programs that exist for doing this at the header level (BAPI_INCOMINGINVOICE_RELEASE, MRM_INVOICE_RELEASE_UPDATE, running a MRBR BDC, etc.), but so far I haven't found a standard SAP code to make this possible at the line-item level. I am aware that making changes to standard SAP table records is heavily not recommended (if not practically forbidden), but the client is insisting they want this functionality and soon. Is there another way of making this line-item block deletion without resorting to modifying the RSEG/RBKP/RBKP_BLOCKED tables? Thanks a lot for your help.
Regards,
-Juan Ramos

Hi,
If you want to split the deliveries in to number of nvoices general configuration is in Item category use Billing relevence = K (Delivery-related invoices for partial quantity).
At the time of creating Invoice in VF01 give the delivery number and click the selection list on the right side top.
You can split based on your line items.
Thanks,
Sree.Manam

Actuals after Commitment and Budget Carry forwards

We recently did a Commitment Carry Forward using CJCF from year 2009 to 2010 (but did not do budget carry forward) and this added the Assigned amount by USD 100 in 2010 for the WBS Element.
I have some doubts and my questions are :
1) when I do the Goods Receipt in 2010 for the commitments carried forward, will the system check for 2009 budget or 2010 budget ?
2) if it checks for 2009 budget and adds to the actuals in 2010, will it not be an incorrect business process ?
3) what would have happened if the budget had also been carried forward from 2009 to 2010.
Thanks for any response.

In budget tolerence limit setting if you have maintained budget check ++ means for all trancastion the system will check for budget against posting values whenever you execute any transaction system will compare the values against available budget of posting year.
in you case at the time po coiitments are created in 2009 and checked for available budget for 2009 now you are posting GR / service entry in year 2010 at this time your PO commitments are going to transfer to actuals but as posting is happening in 2010 system will check for the budget availability for year 2010.
so for any annual budget project at the end of year you have to carryforward commitments and buget to next year.
regards,

Commitment and budget value updation in R/3 from Shopping cart

Hi,
I implemented extended classic scenario of SRM, so I create shopping in my SRM system and not anymore purchase requisition in SAP R/3. As a consequence in SAP R/3 all the controlling standard reports don't display any data about commitment from shopping basket.
SAP SRM only does budget check for shopping carts, but it doesn't post to funds management after the shopping cart's creation and approval. Our client requirement is to update commitment in funds management just after the approval of the shopping cart, just like purchase requisitions of MM does. Does anybody have passed through this problem? How can I solve it?
How can I get commitment from SRM in a standard or custom way?
Thanks in advance,
Santosh V. Fhalke

Dear Santhosh,
note 828231 contains some useful information about commitment in SRM
BR
Michael

Budget validity block error

Hi all,
When we are tryng to replicate PO fromSRM to ECC,we get the following error :
BUDGET VALIDITY FOR DATE XXX IS BLOCKED.
The message no is 213 and msg class is GRANTMGMT in ECC.
Now what settings do I check in ECC to find the root cause of the above error?

No one answered the query.

Help on user exit (credit limit blocking)

Hi,
Currently, my user exit checks the order value in va01, va02 against the remaining credit and puts a credit block on the customer/order if the order value is higher than the credit limit.
However, it should only take confirmed order values. For example, if the user entered 10 qty, but only 1 qty exists, then only 1 of the values should be considered when it against the credit limit.
Please help.
Thanks,
John

Hello John,
Use MV45AFZF Include
here look at documentation top of the form routine
FORM USEREXIT_AVAIL_CHECK_CREDIT USING    US_VBAK STRUCTURE VBAK
                                          US_VBUK STRUCTURE VBUKVB
                                          US_VBAP STRUCTURE VBAPVB
                                          US_RELEASE
                                          US_RECHECK
                                 CHANGING CH_CHECK.
DATA: CON_CHECK_STANDARD LIKE SY-SUBRC VALUE 4,
        CON_CHECK_NO       LIKE SY-SUBRC VALUE 8,
        CON_CHECK_YES      LIKE SY-SUBRC VALUE 0.
CH_CHECK = CON_CHECK_STANDARD.
CH_CHECK = CON_CHECK_NO.
CH_CHECK = CON_CHECK_YES.
ENDFORM.
Thanks
Seshu

Say Credit limit block in working on certain documents

HI FRIENDS
I HAVE AN ERROR
Say Credit limit block in working on certain documents

Hi You have to look to the open-invoices / orderes/ ,.. if the total value is not hihger that you credit limit
FD10N - Display balances
FD11 - Analysis
Paul

HOW TO LIMIT BLOCK RECORDS

Hello all!
Is there a block property where I can set the maximum records per block?
I found just a property where I can set the visible records, but the user
can insert as many records as he likes to.
Regards,
Oliver

I fear there is no easy solution, because users can "clear" a record
(so it still exists in the database but is no more visible in forms)
and then enter another "fourth" one, etc.
My suggestion is:
- Prevent users from using "clear block" and "clear record" by disabling it
- Set the detail block's insert allowed property to false
- Create a "Key-CREREC" trigger on the detail block with the following code:
last_record;
if to_number(:system.trigger_record) < 4 then
set_block_property('BLOCK_NAME', insert_allowed, property_true);
create_record;
set_block_property('BLOCK_NAME', insert_allowed, property_false);
end if;

Commitment beyond budget tolerance.

Hi Experts
For one specific WBS element, user able to generate commitments beyond the budget tolerance despite having AVAC status active.
Please suggest if any thing needed to be done to prevent/correct this.
Thanks and warm regards
ramSiva

Hi,
Please check the settings in SPRO, Project System > Cost > Budget > Define Tolerance Limits for the related budget profile and set the availability Control action 3.
Hope this will help you.
Ajay

Budget checking in Purchase Reqisition item level

Dear Expert,
I have not activated fund management yet. In my project following is the requirement.
Budget checking in Purchase Reqisition item level
Without activating Fund Management, can I make any configuration to solve my problem.
Regards,
David

Hi,
As Alexey mentioned, it's possible also without FM. You have to activate commitment management and control the budgetthis with CO budget module. Of course, PSM-FM would be more generic solution.
Regards,
Eli

In Funds Management-Assigned budget is more than the release

Hi Experts,
We have Funds Management active and in few cases the assigned budget is more than the released budget for a funds center and commitment item. We observed that the material consumption (stores requests) entries get posted even when there is no released budget.
Can you suggest ways to control the posing of material consumption entries when there is no released budget in Funds management.
With Regards
ACR.Ruben

hi
Try there is a USER _EXIT for Material consulmption for the Movement type 261 GI to Production .
Extension SAPLFMFA, component EXIT_SAPLFMFA_001
through this you can stop the Material consumption additions to fundcenter through the commit ment item.
Thanks & Regards
Mala K Reddy

Disallowing Pr commitment or budget limit block at the PR level

Similar Messages

Maybe you are looking for