Disappearing links when importing snippet...

OK, so I have two snippets, both contain a Rectangle with an Image child.
In one of them, that is all I have.
In the other, the Rectangle is part of a group with another item.
After importing the snippet, I relink to fix the image paths.
On desktop, this works perfectly for both.
For IDS server;
1. The single, ungrouped, snippet gives me programmatic access to the link but then tells me the link doesn't exist after it has been relinked, so attempting to do link.update(); throws an error
2. The grouped snippet works perfectly as per desktop
So...
1. Does anybody have any workarounds?
2. Where can I report this bug?
G

This issue is fixed in 8.0.2 update.
If anyone else encounters it, please update your server.
G

Similar Messages

  • Xcelsius messes up links when importing Excel source document

    I am creating a dashboard using an Excel doc as my master source.  Because the dashboard data is all over my network, I have a master excel doc that has cell values that are links to cells in three other excel spreadsheets on my network.  When I import the spreadsheet into Xcelsius, it says the links are wrong.  I click the "Change Source" button and notice the links point to my hard drive (c:\agency\agency production\2008 production.xls) instead of the where the link should be (o:\agency\agency production\2008 production.xls).  The master excel spreadsheet has all the links correctly going to our network drives.
    I've tried recreating the master spreadsheet
    breaking the links and recreating
    Using FQDN names for the links instead of drive letters
    I always get the same error.
    Any help is appreciated.

    Hi Chris,
    I'm actually trying to get one master excel spreadsheet to link to several smaller source files. I've created all the references to the E:\ drive on our server, but when I import the model in Xcelsius the charts are all blank. This leads me to believe that Xcelsius can't work with linked excel spreadsheets. Were you ever able to get this to work?
    Thanks!
    Tiffany

  • Audio Tracks are not linked when imported

    I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
    Adam

    There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

  • CS3 Layers disappear when importing map into InDesign

    I have an Illustraor .ai file of a map with many layers and when I import it into my InDesign document
    some of the layers disappear. When I open the map in Illustrator they are all turned on but in InDesign some seem as they are turned off or transparent. Very frustrating...any help is appreciated!

    Thanks so much for your responses. Although I don't complete understand what the issue was becasue I am no Illustrator expert I did find a solution. I found that there were multiple layers within a layer and also many of those layers had paths/compound paths. So I pulled the layers within out and made new separate layers for them all and removed unnecessary compound paths. So now I have many layers instead of a couple layers with multiple layers within. Confusing I know...but it worked!
    Thanks again for your input.

  • Imported Address Book not linking - when typing, results are red

    OS - Windows Vista
    Thunderbird Version 24.6.6
    Issue: Address book was imported into Mozilla from Windows Live Mail 2006. When trying to send an email, even though the contacts are listed in the address book, when typing them out in a new email, they are still flashing up in red.
    Troubleshooting performed: Composed new mail, typed out email manually - this added to address book. There were four copies of the address book listed, deleted the duplicates and migrated the addresses from the imported book to Personal Address Book. Still not working. Opened Address book and selected contact, attempted to compose mail to selected contact, failed. Checked Address Book entries - found that the entries didn't import properly into the following fields:
    First, Last, Email - rather they got imported as Display Name, Nickname (with nickname being the email address)
    Solution: Went into each contact, and modified them by moving the 'nickname' (which contained the email address) to the 'email address' field. Now able to send emails through to the contact.
    Questions:
    1) When importing the Address from Windows Live Mail - how can we stop it from importing/mapping the email address field into the nickname field?
    2) Is there a faster way to update all the contacts to copy across from Nickname field to the Email field?
    Thanks,
    Angela

    If you import via CSV fie, you should be shown a dialog that asks you to re-sort address book fields so the fields in the imported address book correspond with those in Thunderbird's Address Book.
    Did this not happen?
    See "From somewhere else to Thunderbird:" here:
    http://www.ramsden.org.uk/11_Thunderbird_Settings_and_the_Profile.html
    I don't know of any easy way to work directly with the address book file itself; it's not organized in a user-friendly manner internally. These matters are usually best addressed either before importing (i.e. tweak the CSV file in a spreadsheet program) or via the import dialog.
    Alternative formats such as vcf or vCard may avoid the need to massage the data, but IMHO are less suited to managing address books. If you can use these formats, this add-on can be useful:
    https://nic-nac-project.org/~kaosmos/morecols-en.html

  • HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now.  Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it.  I've just done this using the installation dis

    I've had MS Office:mac 2011 on my imac for around 18 months now.  Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it.  I've just done this using the installation disc which, then said the installation had been successful.
    Outlook is still not working.  Can anyone please advise me on what to do next.

    Remove MS Office 2011 completely (here are instructions) and reinstall it.
    It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

  • How Can I Delete Originals I Don't Care to Keep When Importing From SD Card?

    Hi All,
    Just installed LR3 thanks to Santa. Have been going thru the video tutorials as well as the Lightroom_3_Help PDF and Lightroom-GettingStarted_Lo PDF but I can't figure out how to simply delete files from the gitgo when importing from SD Card or from my HDD (files already moved to HDD but not yet culled or imported into LR3). I was hoping I could, in LIBRARY, just r/c on a file that is plainly not worth keeping and just delete it so I dont have to do it later. Seems like I could, this way, be able to concentrate more on the shots requiring editing.
    Also, need suggestions as to how I should import my files using DNG, Copy, Move, or Add. First off, I am not a working pro but am an occasional serious amateur. I'm picky and I like things to look good the first time and I like options.  The pix already on my HDD are in the PICTURES folder; those imported from SD card get moved to that PICTURES folder. I have, in the past, moved the processed verssions to a different DESTINATION folder - now I still have the originals and I have processed copies to post and share.
    I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    Thanks in advance,
    Phil in San Diego

    Phil,
    PhilipCWells wrote:
     I understand that LR3 does ND editing but I assume that if I only keep a DNG then any time I want a JPEG or PNG of a picture I have to open LR3 to make one. Since I only have been shooting a few hundred pix a year (though with my new D5000 this will change) I am not gonna load up my HDD any time soon. So, is there a way I can make a DNG file, keep the original RAW or JPEG file AND save a processed JPEG or PNG copy in my DESTINATION folder in one swell foop?
    The LR Exchange site has three plug-ins that allow you to keep a "mirror" copy of your DNG/RAW images in JPG format for use by others without having to go into LR and generate them when needed.  The link is:
    http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=tree&search_exchange=25&search _category=-1&search_license=&search_rating=&search_platform=0&search_pubdate=&num=25&start num=1&event=search&sticky=true&sort=0&rnav_dummy_tmpfield=&Submit=
    One of them should help you with this.
    Jeff (in San Diego as well)

  • I am getting an error ORA-39143 when importing a dump file

    I get ORA-39143: dump file "c:\oraload\expdat.dmp" may be an original export dump file
    when importing a dump file created by 9.2 exp into 10.2 database using impdp
    I need to use the impdp utility with the table_exists_action option which doesn't appear to exist in imp
    What is the proper mix of versions/flags/options to export from a 9.2 database and import into an existing 10.2 database while replacing existing data?
    thanks

    well its on the link i provided
    "When tables are manually created before data is imported, the CREATE TABLE statement in the export dump file will fail because the table already exists. To avoid this failure and continue loading data into the table, set the import parameter IGNORE=y. Otherwise, no data will be loaded into the table because of the table creation error."
    original import tries to append (insert)
    there is no parameter here like table_exists_action=truncate/replace
    1. drop all the tables (dynamic sql), so there will be no errors because of already existent tables
    or
    2. truncate all the tables (dynamic sql) + use IGNORE=Y
    (or
    3. drop the whole schema in target database, recreate it, then do the import)

  • ORA-20091: Invalid Application ID when importing APEX 4.0 Application

    Hi Folks
    Anyone got a suggestion on this one?
    Scenario:
    1. Perform an APEX 4.0 Export of application ID 10132 from one workspace
    2. Import the application into another APEX 4.0 workspace and change the application ID whilst doing so.
    3a. During the import process, override the application ID to one that exists in the workspace being imported into.
    In APEX 3.2 you got a warning that you were overwriting an existing app
    In APEX 3.2 this would then complete the exercise with your new app replacing the previous one with the same ID
    In APEX 4.0 I received ORA-20091: Invalid Application ID
    3b. Delete the pre-existing application (e.g. app_id 999) completely in the workspace we intend to import into
    Following successful deletion of the application (app_id 999) attempt to import the application export file from the other workspace
    During the import, use the UI to change the application id from 10132 to 999.
    Still receive the ORA-20091: Invalid Application ID error despite APP ID 999 having been deleted
    4. I got this to work by allowing APEX to simply assign a new application ID
    My problem is that, whilst this was not a problem when importing to our UAT environment, our DEV and Production environments share the same APP ID (10132) this is so that when upgrading the production application, users saved Interactive reports are preserved. This was fine in APEX 3.2 but is, as yet, untested by us in 4.0.
    As things stand at the moment, we have APEX 4.0 in DEV and UAT but this would appear to be a block for us in terms of upgrading production to 4.0.
    Any thoughts, comments and suggestions welcome.
    Many thanks
    Kind regards
    Simon Gadd

    We ran into a similar problem. My initial tests showed the following to be a work around.
    Assumption: You want to end up with the same ID as the original so you don't have to give a new link to everyone.
    1. Before copying the app (lets say it's 333) from 3.2 (3.1 in our case) export it and then import it back, still in 3.x with a different app ID, i.e. 99333.
    2. In ApEx 4: Import the app 99333 and install it with app ID 333 (the original app ID). After this process, I was able to make necessary changes to the app on ApEx 4, export it, and then import it again, still as ID 333.
    I know this sounds very round-about, and I can't explain why it worked, but it worked.
    Disclaimer: I certainly may have missed something that would still make it break. This was the result of a few different test scenarios done in a limited time.
    So, it's probably best to wait for 4.0.1 if you can.
    By the way, I tried creating a brand new app. in ApEx 4, export it and then import it as itself, and I still got the same error. Like I said, I don't know why it worked, but when I imported an older app with one ID into ApEx 4 with a new ID, I was able to export it and then import it again with that same new ID.
    Have a great weekend,
    Gregory

  • Error message when Importing a slide

    Hello,
    Captivate 4 - When importing a slide from one project to another, importing stops in the middle and an error message pops up "Adobe Captivate have encounter a problem and needs to close".   Could it be because the project has been published?  Please advise.

    Hello,
    Acrobat.com is a free service from Adobe, where you can store up to 5GB. You just type in the URL (acrobat.com), log in with your Adobe ID (the same you use for these forums) and can start putting files on it. You can share the file (it is in the right-click menu) and send the link to someone. I'll send you a private message with my e-mail address.
    Here you can find some information about acrobat.com: http://www.adobe.com/acom/usewith/
    Lilybiri

  • FAQ: How do I troubleshoot audio issues when importing .MTS files?

    Hello.   The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
    does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video.   Thanks, Don.

    Hi there
    Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
    Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Links when using Templates don't work in preview

    I have created a template for the 'traditional' top banner,
    left navaigation buttons site. In preview mode, any links
    (navigation area or not) that point to another page in the web site
    do not work, but external links go. (No error is reported, but
    nothing happends) However, when published, all links work. Any
    ideas what is happening?
    Eample link:
    <a href="../catalog.htm" target="_self"><img
    src="../_derived/catalog.htm_cmp_edge000_vbtn.gif" width="140"
    height="34" border="0" alt="Catalog &amp; Renewal"
    /></a><br />
    The graphic does appear for the link.
    If it makes any difference, this is a convert FrontPage site
    where I manually edited the html to import the pages into my first
    Dreamweaver site.
    Thanks in advance,
    Carolyn Wood

    > In preview mode, any links (navigation area or not) that
    point to
    > another page in the web site do not work,
    This is how DW will work if you are using ROOT RELATIVE
    links, *and*
    temporary files to preview.
    Here's an example -
    * I create a page with a link to an image -> <img
    src="/images/foo.gif">
    (note that the image link is a root relative link - the path
    says to go to
    the
    root of the site and look for the images folder because of
    the leading
    slash)
    <img src="/images/foo.gif" (that's root relative - it
    starts with the root
    of the site)
    <img src="../images/foo.gif" (that's document relative -
    it starts with the
    current location of the document)
    * I preview that page with DW (since I am using temp files,
    DW is kind
    enough to realize that root relative links won't work in a
    preview, and so
    it converts them to document relative links when it builds
    the temporary
    file for the preview) -> <img
    src="../images/foo.gif"> (I'm assuming that
    your document is one level below the root of the site). In
    the preview,
    this page looks fine because the browser has no trouble with
    the document
    relative link - it knows where the file it just opened is,
    and can follow
    the path to the image).
    * I then click on a link in the previewed page to another
    page that also has
    ROOT relative linked images --> <img
    src="/images/bar.gif"> and suddenly
    the image does not load.
    Why? Because when you click away from the temp file DW just
    built for you,
    you have lost the benefit of the automatic conversion that DW
    does with
    root relative links, and the browser looks for this new image
    starting from
    the root of the hard drive, not the root of your site.
    The solution is to not use root relative links, and to change
    all your
    existing ones to document relative.
    To read more about this, go here -
    http://www.macromedia.com/support/dreamweaver/ts/documents/site_root_rel.htm
    http://www.macromedia.com/support/dreamweaver/ts/documents/document_vs_site.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "cwood_wdpl" <[email protected]> wrote in
    message
    news:[email protected]...
    >I have created a template for the 'traditional' top
    banner, left
    >navaigation
    > buttons site. In preview mode, any links (navigation
    area or not) that
    > point to
    > another page in the web site do not work, but external
    links go. (No error
    > is
    > reported, but nothing happends) However, when published,
    all links work.
    > Any
    > ideas what is happening?
    >
    > Eample link:
    >
    > <a href="../catalog.htm" target="_self"><img
    > src="../_derived/catalog.htm_cmp_edge000_vbtn.gif"
    width="140" height="34"
    > border="0" alt="Catalog &amp; Renewal"
    /></a><br />
    >
    > The graphic does appear for the link.
    >
    > If it makes any difference, this is a convert FrontPage
    site where I
    > manually
    > edited the html to import the pages into my first
    Dreamweaver site.
    >
    > Thanks in advance,
    >
    > Carolyn Wood
    >

  • Hyperlinks don't work when importing from PowerPoint

    When importing a file from PowerPoint, the hyperlinks on the slide work when in preview mode, but they do not work when the file is published except for when published as a pdf file.  Is this a common problem?

    Hi there
    I didn't think Hyperlinks survived the trip from the PowerPoint universe to Captivate. But things probably changed with Captivate 4.
    It could be that you are seeing the Flash Player silently blocking your linking. If that's the case, following what is outlined at the tutorial linked below should help.
    Click here to view the tutorial
    Cheers... Rick
    Click here for Adobe Authorized Captivate and RoboHelp HTML Training
    Click here for the SorcerStone Blog
    Click here for RoboHelp and Captivate eBooks

  • Pixelated Images when Importing from SD Card

    Hi there,
    Im having a recurring issue when importing images from my SD Card.
    The issue is that when I try to view in the 'Loupe' view, the images don't load at full size, the '1:1' is absolutely tiny?
    Any ideas??
    Thank you.

    Yeah, the black bars at the top and bottom of the tiny preview indicate it is a camera thumbnail, not a large-sized preview embedded in the raw file.  Without seeing the raw file, itself, it’s hard to know if there is actually a reasonable-sized preview embedded in it or just the tiny thumbnail.  If you want someone else to take a look, upload a raw file to http://www.dropbox.com/ and post a public download link to it, here.
    And more importantly, as was just asked, does the image import ok.  If so then you’ll just have to do the importing, first, before you sort through what you want.

  • Jikes compiler problem when importing class from a jar

    hi everyone,
    I'm new there so please excuse me if i post a pb that have been already answered...
    I've a pb with jikes that is encountering a problem and so closing when compiling. I use ant to build my project.
    In my classpath I have, among others, a jar named 'kepler.jar' in which I use the following class 'WSResult;'
    In my java class I have the following import :
    'import com._4d.kepler.model.WSResult;'
    Do you think it is the character "_" that makes jikes to bug ?
    What else can be the problem of not compiling and stopping building the project ?
    Thank you very much for your help, looking forward to your answer...!
    Florence.

    Editing material is vastly different from just playing it.
    With Audio, a player is accessing the actual file on the HDD, and reading the info from there.
    The big difference is that with PrE (and PrPro), those files are not being used directly. When Imported, a couple of things happen:
    PrE creates links to those files, for later use, when one Exports/Shares
    PrE creates "proxy files," to display the Video on the Timeline, based on those links. It also creates proxy files for better display, when one Renders the Timeline, or portions of it.
    PrE creates a CFA (Conformed Audio) and a PEK (Waveform Display) file, that are used - the CFA is to allow for critical editing and the PEK is what one sees on the Audio Track. The actual files are NOT directly accessed - only the CFA file.
    For a bit more info on Conforming, see this ARTICLE.
    Now, there have been some problems reported, where the Audio was Linear PCM/WAV. I do not know what there is about the LPCM, that causes the issue, but the "plain vanilla" PCM/WAV's seem to be trouble-free. I would love to read, from an Adobe employee, or audio engineer, explaining on why there might be issues.
    For the red, and as there is some "earthiness" to it, I like the Acacia Carneros Pinot Noir. I pick it up at Costco for about US $22. It has proved to be about the best inexpensive PN, that I have encountered. Another, is the Peachy Canyon Incredible Red, which I have picked up "on sale" for around US $ 9. Their Peachy Canyon East Side Zinfandel, is even better, and I've found it as low as US $ 15. If you can find the Glen Carlou Grand Classique (South Africa), it is about the best cheap Bordeaux Blend, that I have ever found at ~ US $ 12.
    Good luck,
    Hunt

Maybe you are looking for