Disappearing / Missing Thumbnails

Does anyone else suffer from disappearing thumbnails?
Viewing my photo stream there are loads of missing thumbs, but I can view the photo and after I do the thumbnail is back but not for long as when I go back in it's gone again, tried repair permissions (disk utility) and repair photos (cmb+opt on launch) with no luck.
I see the in the general 'photos' as well as photostream.

Does anyone else suffer from disappearing thumbnails?
Viewing my photo stream there are loads of missing thumbs, but I can view the photo and after I do the thumbnail is back but not for long as when I go back in it's gone again, tried repair permissions (disk utility) and repair photos (cmb+opt on launch) with no luck.
I see the in the general 'photos' as well as photostream.

Similar Messages

  • Missing Thumbnails in CS5 bridge

    I just got Photoshop CS5 and for the first time decided to use Bridge that comes with Photoshop. My problem is that Bridge doesn't show thumbnails for all my files. Some folders of images have a few thumbnails missing, other folders have a lot of thumbnails missing. One of my folders have over half of the image thumbnails missing. An icon shows up instead. I can still double click these icons to open the image in Photoshop but I can't see the image in advance of opening it. I found a whole lot of info on the adobe web site concerning thumbnails in a lot of various products. But nothing seemed to match what I'm experiencing. In fact a lot that I read leaves me more confused. Anyone else having this problem and have an answer?

    90% jpg
    Some NEF and some TIFF. None of those have missing thumbnails, but then I don't have very many of each.
    Just got an upgrade to Bridge this morning, version 4.0.5.11. After it installed I checked for a change in the thumbnail problem. No fix.
    ACR is version 6.4.1.145
    Mike

  • Missing Thumbnail Fix, at least for me

    I had an extremely frustrating issue with missing thumbnails (dotted blank boxes) with iPhoto 6 that migrated to iPhoto 8 with no relief. I tried all the thumbnail and library rebuilding, and permission repair issues to no avail.
    In my case, the original images were fine - if I double clicked on an image, it would open fine in iPhoto - right-clicking to reveal the original in the Finder worked fine too. But for about 100 photos, no thumbnails.
    I finally discovered that if I edited the image in some minor way, the thumbnail would rebuild. The easiest was to rotate the image (selecting multiple worked as well), and then undoing the rotation. I don't know what caused the issue to begin with, but this action fixed the issue in a way the built-in rebuilding option could not do.
    Hope this helps.

    Tom:
    To help prevent loss like you experienced see the tip at the end of my signature.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Missing thumbnails and previews Bridge CC x64. Help!

    Week ago have missing thumbnails and previews in Bridge CC x64.
    Where are no thumbnails cannot preview and open in photoshop.
    What can i do? Please help!
    Thanks!

    Thanks, station_two!
    I have surprised there all pictures from OneDrive on Windows 8.1.
    When i copy those out of OneDrive thumbnails generated
    Then copy all folder with images back and all works good!
    Very strange. But good!

  • Missing Thumbnails in iPhone Device Library in iPhoto

    Hi guys,
    How do i remove those stubborn missing thumbnails from my iPhone device in iPhoto?
    I have new pictures in my iPhone camera roll that aren't reflected here in my iPhoto when i synced it with iTunes.
    Do i need to clear any cache or something? if yes, how?
    thanks in advance!
    Attached is a screenshot of the problem;
    http://img199.imageshack.us/img199/8184/screenshot20100225atam1.png

    i have solved the issue.
    Restart my mac and it's done
    thanks!

  • Missing Thumbnails

    Missing thumbnails
    In October I switched from OS 10.1.5 to OS 10.4.8.
    My thumbnails have become only dotted outlines in iPhoto 6.0.5, except when enlarged.
    Reading thru these topics, I realize it may be my fault.
    I apparently committed a no-know by renaming the folder that appears after the folders MODIFIED and ORIGINALS with a different name. What I think I have done is rename the THUMBNAILS folder.
    I have no idea what that original folder name was, so can somebody supply the name, and will that help? I would like to try this before going to the other methods for restoration.
    Luckily, I saved all of OS 10.1.5 on my new external HD along with those files, so I can go to the old iPhoto 2.0 anytime. The Thumbnails work just fine in 2.0, maybe I should not bother with all this c--p!
    G4   Mac OS X (10.4.8)  

    IT WORKED!
    Thanks for the advice Terence. When I changed that Thumbnail folder name back to "Data" from what I had named it, all my Thumbnails came back. The reason I stupidly changed the name was that I was looking for the folder that holds the album folders, and wanted to identify that folder by using a different word. I still have lots of things to work out in going from iPhoto 2 to 6, and will post more questions as I go along.
    Thank you,
    rpisquared

  • My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    My new tab page displays only an empty grid. Missing thumbnails -and- sites. I -think- my settings are correct. Please advise.

    What are the settings for clearing history when Firefox closes?
    Make sure that you do not clear the Browsing Cache as that will remove the thumbnails that are stored in it.

  • "any" help out there for missing thumbnails???

    I looked for archives of this problem out on the internet and have had no luck with the solutions of finding files "thumb.5". I am missing thumbnails from over 6000 pictures. Each time I pick a block of pictures to "update thumnails" , it actually takes away the few thumnails that are there.
    I installed 5.0 on Vista 3 months ago, and everything was fine. All of a sudden, all I see is the hourglass (which basically renders the program useless)
    If no one has any fix, do you know who I can contact at Adobe or a customer support number ... they hide that stuff pretty well in their website.

    Chuck,
    I am running Windows XP rather than Vista so I hesitate to predict a folder structure under Vista. And I have always kept my catalog name the same at the time of the Restore.
    I know that a friend verified for me that when he took a PSE 5 Backup done under Windows XP and then used that backup to do a Restore on a Vista machine running PSE 5.0.2, it restored correctly to the Pictures folder structure.
    Running under XP and PSE 5,if I choose
    b Folder Location view
    (pull down box lower left below thumbnails) and then Right Click on the Name of one of the folders which contains photos in this catalog, the right click menu has a choice to
    b Rename Folder
    . (Note: in my case that specific folder had no subfolders).
    I did that Rename Folder in PSE and then subsequently checked in Windows Explorer to find that the folder had actually been renamed. So that seems that it might be a possibility. However, I highly recommend that you do your own test using a folder containing less significant photos.
    And I recommend that you 1)do a File > Catalog > Recover before you do this renamimg in order to cleanup and compact your catalog. 2) Then also before you rename, use Windows Explorer to just copy your Catalog file to save an extra copy somewhere. 3) After you are finished this renaming and verified that it is OK. do the File > Catalog > Recover again and then perhaps do a new PSE Backup (or however you normally backup).

  • I'm missing thumbnails... have rebuilt twice... then did a permissions repair before I try and rebuild again... any suggestions?

    Need help with missing thumbnails...Iphoto11... have rebuilt twice, which took hours... rebuild works but when I close app and reopen, they are missing again.  Did a premission repair in disk utilty and Iphoto, getting ready to rebuild again to see if it sticks this time... if not, any suggestions?  I don't want to lose my images.  Thumbnails are blank, but clicking image shows they are there.... so I know they are still on the computer.... not sure what to try next????

    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  

  • IPhoto thumbnails disappear - missing photos

    iPhoto crashed a few days ago, and I had to rebuild the library. After this was done, my events were all out of order but the photos were still in tact. However, there were about 100 photos in one event that were missing. They were represented by black squares. The thumbnails would show for an instant while I was scrolling through the event, but then the thumbnails would disappear and turn black. When I selected a photo, it showed a black exclamation warning sign.
    I back up to Time Machine, so I tried to restore my iPhoto library from an older backup. Those same 100 photos seem to be corrupt in every single backup since the photos were taken. To make it even harder for me to understand, I actually viewed these 100 photos in iPhoto last week and they were fine, so I know they haven't been corrupt since they were imported to iPhoto.
    Are these photos recoverable?

    The exclamation mark is an indication that the link/file path between the thumbnail and the master photo has been broken. Try the following:
    1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
    2 - apply Option #4, Rebuild Database.

  • Missing thumbnails in Bridge CS4

    Can anyone explain why some of my .PSD thumbnails have gone missing from Bridge CS4? The files show as simply the PSD icon. These are large files (~200MB). If I highlight the files in a folder, right-click, and 'Purge cache for selection', the thumbnails immediately appear but then disappear one by one as the little wheel in bottom left corner of Bridge revolves and the number of full file extractions counts down. I've completely purged the cache via Bridge and in the cache folder by hand. In Bridge Preferences I've set the maximum file size at 3000MB. The odd thing is that thumbnails of similar size files disappear in some folders but not others. Some .TIF files have also disappeared. Smaller files (less than 100MB) seem ok. Any suggestions welcome.
    Thanks.

    Is there any chance that your cache file is too small to hold all the thumbnail data?  If so it could be erasing the large ones to make room for others.
    Have to compacted the cache to get rid of orpan files?
    Are you using quick or HQ thumbnails?  If memory  and speed are considerations try quick thumbs.

  • Missing thumbnails after dragging a project into another folder?

    Why would cause whole bunch of photos in an album to not show up in browser/viewer after dragging and dropping from one folder into another?
    If I click on the root folder where the project is located, all the photos show up again on the browser/viewer. But when I click on the specific album within the folder, they disappear again.
    The only way I can find to get Aperture to display the photos in the album is to close the app and relaunch it, which is extremely annoying when I just want to move a couple of albums around.

    Looks like this is the closest to the trouble I am having. I am having the same issues. just downloaded the trial version and imported all my iphoto library but all my video files are missing those thumbnail in the browser format... well actually regardless how I view the file, thumbnails are missing for all the videos. To me, it doesn't do anything even if I restart the app...

  • Missing Thumbnails and Missing Photos

    **** iLife!!
    I updated iphoto to 6.02, and now I'm getting blank spaces for a bunch of photos in the thumbnail section, and I'm getting the empty grey square with the exclamation point in regular sized photos.
    Everything was just fine before the upgrade.
    HELP!!!

    Yes, ditto. I have same problem as Ted if not worse with iPhoto 6.02. There must be 10000s of us out there which means that someone must have figured out a solution by now. Please!
    I followed Niantic's instructions but nada. I also updated my OS and followed the link to the Apple com article on images with !s but Show file got no response nor did show original file etc.
    Before I rebuilt the library I could click on some (but not all) the blank thumbnails and see the whole photo, but now all the blanks remain blank with the ! in the middle.
    Checking the missing photos I noticed two things that might help. First, a great wodge disappeared from those taken between July and September 2005. Although some were still showing.
    Of the other that went missing it seemed pretty random with a few here and there from the beginning of my library (2002) onwards.
    Also a bunch of photos I gave names to so I could identify them easily in the iPhoto library folders got jumbled in the library so they are now out of sync with when they were taken.
    Also some photos have renumbered themselves so 015_13 has duplicated itself as 015_12
    Also the dates are wrong (this must be pretty easy to fix), so for example photos I took in March 2006 say Jan 2005
    Also when I examine the file directory on iPhoto library none of the dates correspond to when I took them (one strand starts 1970) and many of the subfolders are empty (so I cant quite understand how they came to be created).
    Finally, yes I do have backups though I am not looking forward to the hours it will eventually take identifying all the missing photos by number and then reimporting one or several at a time.
    I already tried to do this with several different photos and each time it read: "Unreadable file: the following file could not be imported: users/etc/etc/IMG_xxxx.jpg (The file is in the iPhoto library folder). Please could someone translate what this means!
    Please excuse the length of this posting but I figured the more info I give the more likely there might be a clue for some bright spark to figure out what the xxxx is going on. Like Ted, my digital photo life was simple and peaceful until iLife 6 came along.
    I suspect that messy file management that was tolerated in my earlier version is no longer tolerated by this new version. Whatever the reason i am completely stumped. Over to you, Sherlock…
    iMac G5 (3.0) 512 MB   Mac OS X (10.4.6)   Bought July 2005

  • Missing thumbnails. Any way to rebuild them?

    I converted over a large (~150gb) Aperture library to Photos and most of my thumbnails are missing. Does anyone know of a way to have these rebuilt? Any ideas would be greatly appreciated.
    Note: I have already tried repairing the library. This sadly did not help.
    Thanks

    At least a month. I was on a beta version of it before the public release. For more detail, the thumbnails disappeared after doing a Time Machine recovery at one point (after a cloud issue resulted in most of my photos deleting themselves). All the content is there, but images only appear if viewing in the individual 1:1 view.
    I'm thinking I may have some rare glitch related to importing on one of the betas. The answer is probably just to start a new photos library from Aperture (I still have he old library), but I wanted to see if anyone knew any tricks to fix this (I've put some time into sorting the new library, and have added some photos).
    Thanks for the reply.

  • Missing Thumbnails in Organizer Importing Function

    I recently upgraded my my operating system from Windows XP to Vista.  When I used the import function in Elements Organizer (with XP) I could preview the thumbnails and select the desired images on the camera or compact flash card.  Now that I have moved to Vista the thumbnail preview or selection is no longer visible or accessable. 
    I have been through the software options, search engines and this forum but have seen nothing about this problem.  I do sometimes have a perchance to miss the obvious and apologize if this is the case.  Any help is appreciated.
    OS Windows Vista 64 bit
    Photoshop elements 9
    8Gb RAM

      Possibly due to display or dpi settings in the Windows control panel being below 96 dpi or 100% especially if you have a short screen e.g. laptop or notebook.
    A work around is to import everything from the card into a folder on the hard drive. Then use File à Get Photos
    It’s then possible to select and deselect from the Organizer import dialog.
     

Maybe you are looking for

  • Font in CS4 doesn't work in CS6

    I have a TrueType font that a friend made me a few years back. It's my favorite font and I use it frequently; however, I recently upgraded from CS4 to CS6 and the font doesn't work properly in CS6. It does show in the font menus, but now in CS6 it's

  • Jdev 11 Web Service Tester can't be invoked because WSDL Doc can't be read

    After installing successfully JDev 11.1.1.1.33.54.07 under Debian (Ubuntu 7.10) I proceed with the tutorial "Building and using Web Services ..." The 1. lesson ends with trying to test the webservice via the context menu of a .java source which was m

  • Need to get result in vertical way

    Hi, declare string_to_parse varchar2(2000) := 'abcdefg,hiklmnopqrst'; l_count number; l_value varchar2(2000); begin string_to_parse := string_to_parse||','; l_count := length(string_to_parse) - length(replace(string_to_parse,',','')); -- In oracle 11

  • CC updater

    The updater for Adobe Creative Desktop starts to update, goes about halfway, then fails.

  • IPad 3 Siri problem

    Brand new iPad 3, when I use Siri it keeps repeating, "I'm sorry, there is a problem.  Can you repeat that?"  I did a restart and a reset and same problem.  Any other ideas?