Disappearing palettes in Dreamweaver CS3
After launching Dreamweaver CS3 on my MacBook Pro in Mac OSX
10.4.9, I discovered that my insert bar, properties palette and
many of the other palettes had become transparent with only their
title bars visible. Clicking inside the invisibale areas simply
brought the desktop or whatever was visible underneath to the
front. I searched for every forum and Google search with no luck.
If anyone else is experiencing this, I found the solution and offer
it here.
There is a conflict with Unsanity's ShapeShifter interface
customization program. When ShapeShifter is enabled, it will cause
palettes in Dreamweaver CS3 on an Intel Mac to become transparent.
To resolve this, go the System Preferences window and click on
ShapeShifter. Click on the Exclude List tab, click the Add button
and select the Adobe Dreamweaver CS3 application icon and click
Add.
Relaunch Dreamweaver and everything should be back to normal,
except that the Dreamweaver interface will return to the original
Aqua scheme.
Apparently, this happens only in Dreamweaver CS3 and no other
Creative Suite apps seem to be affected.
There's another fix that saves the cosmetics at the cost of a
little speed. Make sure Dreamweaver is closed. Select the
Dreamweaver CS3 application, then Get Info. Check the box to run
the program under Rosetta. Close Get Info. When you relaunch
Dreamweaver (assuming you haven't added it to Shapeshifter's
exclude list), it will open with the palettes showing properly and
with the Shapeshifter theme applied.
Similar Messages
-
Table Disappears in Dreamweaver CS3
I am trying to update some pages that I did not create and
that were not created in Dreamweaver. When I open the page in DW,
the table with the text does not show up. Everything works fine
when viewing in IE.
This is the page:
http://vzoners.com/secondkingdom/sktravelersfaire/friday.html
This is what I get when I open it in Dreamweaver CS3:
DW PIC
I really would rather be able to update in Design view, so if
anyone can help I'd really appreciate it.
Thanks!
Debbie> When I open the page in DW, the table with the text
> does not show up.
look in code view in dw.
see all the yellow highlighted tags?
start here around line 113
<tr>
<th align="center">Time</td>
<th align="center">Game</td>
<th align="center">Host</td>
<th align="center">Locale</td></tr>
change to:
<tr>
<th align="center">Time</th>
<th align="center">Game</th>
<th align="center">Host</th>
<th align="center">Locale</th></tr>
around line 135, same issue. wrong closing tag.
keep going- after fixing the wrong closing tags, click back
in design view,
then look back in code view to find the next set of
improperly closed tags.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
How do I create a guestbook in Dreamweaver CS3, Plz Help....
Hi I want to create a guestbook in dreamweaver cs3 my website is www.freewebzs.com
Also it would be brilliant if you guys could help me and recommend me background colours, is there a free website I can get background colours from?
And also what fonts and colours are most popular for websites.
Im new to dreamweaver as ive just started using it so any advice would be great, thanksI have to agree with David, if you are new to DW, then creating a guest book will be difficult for you. However, you don't have to re-invent the wheel, there are many guestbook scripts available to save you the time and certainly the headaches :-)
Take a look here for a selection: http://php.resourceindex.com/Complete_Scripts/Guestbooks/
As for colours kuler is good, but you can also look at;
These palettes may help:
http://www.colourlovers.com/palettes/search?hsv=&sortType=rank&sortBy=asc&query= spring&hex=&lover=&hueOption0=&hueOption1=&hueOption2=&publishedBeginDate=12%2F2 7%2F2004&publishedEndDate=04%2F12%2F2009&x=26&y=17
More colour schemes here:
http://www.colorschemer.com/schemes/
For fonts, you are better staying with web-safe fonts that will ensure cross browser compatibility:
http://www.ampsoft.net/webdesign-l/WindowsMacFonts.html
Nadia
Adobe® Community Expert : Dreamweaver
Unique CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
Book: Ultimate CSS Reference
http://www.sitepoint.com/launch/005dfd4/3/133
http://twitter.com/nadiap -
Dreamweaver CS3 First Run problems
Installing Dreamweaver CS3 Saga.
I've had some trouble and despite looking for answers and
trying a few things I'm getting nowhere. I've included a timeline
of events below to help explain.
0) System: New Dell Opliplex 745 running XP Pro Sp2 and
networked to a domain. Educational License ordered for MOPS school.
Disk delivered.
1) Tried installing in regular user's account. When it
prompted for admin details, I entered them, but it didn't work.
Insufficient rights to install, fair enough.
2) Logged on as domain admin. Tried installing. Failed!
Insufficient rights. Hmmm.
3) Logged on to local computer as administrator. Installed.
Success! However, could not find the serial number so selected
"trial" option. All worked ok. Emailed supplier to find out why
serial was not included with disk.
4) Gave regular user full admin rights on computer to avoid
future hassles.
5) Obtained serial from supplier (it was on the invoice).
Entered serial number while logged on as user. Dreamweaver accepted
serial but then a blank dialog box (titled Adobe Dreamweaver CS3)
opened over the top of the rest of Dreamweaver and froze up access
to Dreamweaver. Can't close box, can't interact with box apart from
moving it around over the top of DW. It doesn't count as a separate
window in the task bar.
6) Ended Dreamweaver process, loaded it again. Blank dialog
box appeared yet again however Dreamweaver began some adobe
updating. ~140mb download. Around 20mb in, some files began
installing - so far so good. Then, adobe updater vanished and we're
back to frozen dialog box.
7) Restarted computer. Logged on as user again, ran
Dreamweaver again. Frozen blank dialog box again HOWEVER I did find
that if I was quick I could interact normally with Dreamweaver,
open files, etc for a few seconds until dialog box kicks in. Also
when ending the task instead of ending the process, the windows
message says "The system cannot end this program because it is
waiting for a response from you. To return to windows and check the
status of the program, click cancel. If you choose to end the
program immediately, you will lose any unsaved data. To end the
program, click End Now." Obviously this refers to the blank dialog
box but I can't interact with the box so I can't respond to DW.
8) Remembering previous troubles, logged off and logged on to
local machine as administrator. Ran Dreamweaver again. This time an
initial dialog box asking about file associations popped up. Then,
Adobe update began running, this time 120mb download. Once again,
around 20mb in, some files installed and then Dreamweaver frozen
dialog box once more is revealed. The rest of the updates are
nowhere to be seen, adobe updater does not seem to be running any
more.
9) Found an issue in forums with corrupt Bonjour installation
causing DNS trouble. Figured this might be affecting the updates,
uninstalled the service as outlined elsewhere on this forum. Did
not help.
10) Decided to attempt a repair install from the disk. It
seemed to work but then only the shared components seemed to
install. But underneath that in the installation window, it said
both Dreamweaver and the Shared Components failed to install. So
did it fail or did it not fail? Your guess is as good as mine.
11) Ran Dreamweaver again. This time, a green "scrolling
credits" style window appeared, with "Click here to continue". Upon
clicking, the credits window disappeared and all looked well. I
alt-tabbed to something else but when I went back into Dreamweaver
the blank dialog window was back again.
I've searched the net, and scanned these forums but I am
unable to find a similar issue or any clue as to how to proceed
next.
I am going to try to uninstall Dreamweaver and reinstall it
fully, while logged on as local admin, probably I will use the CS3
clean script that I found on the forums to make sure its all gone;
and then I will enter the serial at the same time as installation
to avoid ever triggering the trial installation conditions. In the
meantime if anyone has any suggestions feel free to chip in with
ideas.
PS Further information which I just remembered: Internet
access is restricted by a proxy. Adobe updater worked fine after
giving it username and password to log on to the proxy. Perhaps
this frozen screen is trying to access the internet?Further information - when I tried to uninstall I was advised
by the uninstaller that I should deactivate CS3. But I couldn't
find how to do that in the few seconds before everything freezes.
I had an inspiration to pull the network plug out and sure
enough, the frozen window became a window which reads:
Dreamweaver is unable to connect to the internet to register
your product. I selected "Register Never" so hopefully this will
fix my problem! -
Links Problem in Dreamweaver CS3 !
I recently reinstalled my Dreamweaver CS3. Now everytime i save a file, it saves the whole directory path with the file name. So when i opened my index page and saved it with some changes, all my css tables have been lost. and all the links in the file are relative to my system directory.
BEFORE, it was index.html
AFTER SAVE, it is "C:\Documents and Settings\Idiot User\index.html"
this has happened to EACH link that i used in my page, so even the css stylesheet is not working.
the entire website appears perfectly in Dreamweaver, but when i upload the files to my webspace, the links link to "file:///C|/Documents%20and%20Settings/Delvin/My%20Documents/CBPC%20Website/sermons.html" , for example.
also when i change the links, image locations to the File-only, and remove the directory bit, the images disappear in dreamweaver.
Everything was working perfectly, until i re-installed the program. Can anyone suggest a way in which every file and every link is synced; so it is what it says it is WYSIWYG !i do NOT think that it is a helpful answer .
You may not think so, but it sounds like a very plausible explanation and a mighty good place to start looking.
In your site definition settings, are your links relative to Document or Site Root?
Which operating system are you using?
Did you get all the latest updates for CS3 since re-installing?
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb -
Invisible Tables In Dreamweaver CS3
Hello – I’m having a problem accessing the proper table in Dreamweaver CS3. In the past I never had a problem with this now all of a sudden I cannot figure out what I did to change this setting. I want my tables without borders, which I have achieved by setting it to zero border… however it now completely disappears from the page while I’m working on it and I have nothing to define my table. In the past when working with zero borders it would still define the structure of the table but wouldn’t appear when published on the web. I went into view / visual aids / and checked table borders and still nothing. How can I view my table boundaries while working with no border? For years I had no problem with this and now I’m really puzzled as to what I have done to change the setting. Please, if anyone can help I’d appreciate it.
Even with a black background, you should be able to see the dotted lines surrounding a table.
I just tested with a black background with Visual Aids> table borders turned on and could see the outline, and then turned the borders off, and then I certainly couldn't a thing :-)
Sounds like something's broken in DW...if DW starts to act a bit weird- this frequently means you may have a corrupt personal configuration folder.
Close Dreamweaver, locate the personal configuration folder, and rename it.
When you restart Dreamweaver, it should create a new configuration folder with all the program defaults.
For details of how to find the configuration folder, see this page in the Dreamweaver FAQ
Hopefully this will fix the problem for you. -
Dreamweaver CS3 Remote View file display
Specs:
Dreamweaver CS3 on Windows XP Pro SP2.
Upgraded from DreamWeaver MX
1680 x 1050 60Hz resolution on vertical display LCD panel
with the monitor turned/displayed verticle so I can view more of
our site tree.
Problem:
When viewing files in split panel display (Remote Site on the
left, Local Files on the right) my Remote Site display will
collapse upward...hiding files from view, but they are actually
still there: I can click Refresh and the tree expands again: After
several seconds or sometimes immediately portions of the
folders/files will collapse/hide again.
It will do this to files I have selected. It will hide files
I have checked out. The worst of it is that sometimes files will
hide or collapse within sub-folders..giving the appearance that
files are stored in incorrect folders.
Thank you for your timeCan you explain the symptoms in more detail? Mixing the use
of DW8 with
DWCS3 would not make remote files appear and disappear.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"shimmerdark" <[email protected]> wrote in
message
news:fs91gm$dea$[email protected]..
> Having the same problem with our company website. It
seems that files
> randomly
> disappear and reappear when they feel like it. Not sure
if it is a FTP
> issue or
> something else. I am the only one in our organization
that is currently
> using
> dream weaver cs3. Everyone else is still use DW8.
> -
Using Kuler + swatch exchange files in Dreamweaver CS3
What is the "best practice" for taking a swatch exchange file from Kuler and getting either the swatches into Dreamweaver CS3 or the html color values.
I like using Kuler to develop test color schemes for my web sites and switching css sheets to determine which colors I like best.
Right now the method I use is save the Kuler thems as swatch excange files, load the swe file into my swatch palette in photoshop, get the html values with the eye dropper tool take those values and paste into my CSS file. Is there an easier way?
Any help is much appreciated.
ThanksHi rocketboy,
To get swatch values, an alternate to using the picker tool in the product is to directly use the website. You can ge the swatch values by selecting a theme in the browse view and then clicking on the make changes ot this theme button which will take you to the theme creation view with all the color values located at the bottom of the page under the corresponding swatch.
Kuler Team -
Dreamweaver CS3 Crashes At Startup
I installed the CS3 web premium suite and all the programs
worked great, including Dreamweaver. After rebooting the PC the
next morning, Dreamweaver CS3 would not launch anymore. I
reinstalled DW but still the same problem. Startup gets as far as
reading the site cache and then totally disappears. I've tried
renaming/deleting the Configuration and the registry key
(HKEY_CURRENT_USER\Software\Adobe\Dreamweaver 9), and the DW8 site
caches. The other CS3 programs work fine.
What now?I can open Dreamweaver now but I don't think the problem is
solved. Here's what happened:
I took the steps in the article you referenced and some
others, re-started the pc repeatedly with all start-up programs
disabled, and waited in vain for the promised return phone call
from a seemingly diligent guy in Tech Support. When I called Tech
Support the next day, they said that the case number and customer
ID had no reference to this problem so someone would call back. OK,
fine. I'll wait.
I did a "clean update" of ZoneAlarm, remembering that this
had solved some other problems in the past. Later yesterday, I was
cleaning up some experimental website file directories and renamed
a few of them to make more sense of what they were.
When I tried to re-open Dreamweaver later, it paused to tell
me that it could not find the directory for the site referenced in
the site definition and I should go to Manage Sites to fix it.
Since Dreamweaver had crashed repeatedly before reaching this
stage, this was a major victory. The site it was trying to open was
one that I had set up to experiment with some of the new features
in DW CS3 after the initial installation. Fortunately, it was one
that I had renamed earlier yesterday.
The offending directory contained a page with some of the new
Spry widgets (Tabbed Panel and Accordian) and a short slideshow
that I think I made using Bridge.
So, I was able to open the Manage Sites panel and point
Dreamweaver to another site definition. It opened fine and everyone
lived happily ever after.
Unfortunately, the problem is not solved -- just worked
around by coincidence.
Here is some info from the Windows Control Panel's Event
Viewer about the last time that DW crashed: Faulting application
dreamweaver.exe, version 9.0.0.3481, faulting module msvcr80.dll,
version 8.0.50727.163, fault address 0x000142f1.
Hope ths helps Adobe figure out what is causing this crash.
Now that I can open Dreamweaver CS3 and use it, I'm really
impressed with the upgrade.
Harry -
Who uses Dreamweaver CS3 on Mac OS X?
Howdy,
I'm curious to know how many of you here use Dreamweaver CS3
on the Mac? Not bothered bout you Windows users, I've used it on
there and it's fine (although bulky and slow).
I made the switch to mac a long while back, and coming from
Windows and HomeSite (oh how much I love homesite!!!) the natural
move was to go to Dreamweaver. So I bought a retail copy (along
with PhotoShop CS3) for quite a bit of cash, and I don't use CS3 as
its pretty damn awful on OSX!
By the way, I NEVER touch the WYSIWYG part of Dreamweaver
(wish I could delete all WYSIWYG stuff from it, as that what slows
it down I'm sure)
To name a few bugs (I'd like to know if you experience these
too):
1. It's very slow and bulky, I mean just moving the cursor to
a new line in code view is slow, just doesn't feel good. It
actually feels like its about to crash on me any minute! And I'm on
a 6GB 8 cOre 2.8GHz Mac Pro... so its not my Mac :)
2. I set my toolbars up to my own preference (i.e. I like to
have the "Standard" menu showing and the "Document" one not) then
suddenly out of the blue "Standard" has gone and the "Document" one
is there. Sometimes I boot up and all is good, open a document and
it disappears (along with the line numbers on the left), right
clicking says its still there but it isn't.
3. Certain folders on the left file view REFUSE to close! I
collapse them, open another folder up (uncollapse) and what do you
know, the other folder pops open again. Close and open dreamweaver
its open again... I've never manged to close this particular
folder, dreamweaver really likes it for some reason?
There are plenty more, but they are the main ones!
The unfortunate thing is I cannot find a good alternative on
OS X for syntax highlighting, the fact that HTML elements are
coloured differently is invaluable to me, and thats one of the main
things I love bout Dreamweaver (not to mention the global replace
feature that other IDE's don't include)?
Bring HomeSite to OS X is what I say :)
What is your experience of DW CS3 on OS X? Does it all work
correclty for you? Or are you annoyed by it too?
taAnsel_Tk1 wrote:
> Next time i hear a mac dude extolling the virtues yada
yada I'm
going to tell
> him to cram it.
>
> Tongue in cheek of course :)
>
I plotted my escape from Microsoft for years before I finally
knew
enough about software and the technologies I was using and
had
sufficient money to make the leap. (I went for a top of the
line MacBook
Pro.)
On the negative side, I've learned that the Mac isn't a free
ride.
Upgrading to Leopard was a wrestling match, as was upgrading
to Adobe
Creative Suite (largely because certain sales people sold me
the wrong
upgrade package - twice). I'm also bothered by a number of
annoyances
that sometimes remind me of my Windows PC.
However, I'm working with a far greater variety of software
programs
than I ever had on my PC, and the annoyances seldom turn into
the minor
catastrophes that made life with M$ living Hell.
So far, Dreamweaver is working fine for me. The biggest
annoyance is the
fact that it likes to jump back and forth between "Spaces,"
though
Spaces remains my favorite Leopard feature.
I'm sorry you're having problems with yours - and I was
shocked to hear
that that Rosetta crap also applies to Dreamweaver. I'd never
heard of
Rosetta until I had some problems with my browsers. Enabling
Rosetta
fixed the problem, but, sheez - all that Rosetta business
sounds like
something that came straight from Bill Gates' living room. So
I'm not
sure if the problem ultimately rests with Adobe, Mac OS X or
both.
Unfortunately, I don't know enough about the situation to
advise you.
However, if you live near a sizeable Apple store, schedule an
appointment with their "Mac Geniuses." I've gone in to see
them at 7
a.m. a couple times - free of charge - and they were a big
help.
If you're using Leopard, I assume you've already installed
the two
updates - 10.5.1 and 10.5.2. Ironically, the second update
appeared to
create one of the very problems it's supposed to eliminate.
(Whether or
not it's actually a problem is a matter of debate in the Mac
community;
it hasn't actually caused any problems for me.)
You might also try posting some questions on Apple's forums -
http://discussions.apple.com.
If nothing works, and you do go back to M$, I certainly
wouldn't hold it
against you. If Apple and/or Adobe don't have their act
together, then
you can't blame people for returning to a platform that
works. However,
I have much greater confidence in both Apple and Adobe to fix
their
problems in the long run than I do in Microsoft. Even if you
get
Dreamweaver to work on your PC, will your other software
programs work?
In summary, I've learned that there's no free ride in
computing. But I
still prefer my Mac to M$, and I don't believe I've heard as
many
complaints about Dreamweaver on a Mac as I have about Vista.
But do
whatever's best for you.
> I have been using Dreamweaver on the PC for years, quite
happily too. I've gone
> through the switch and am now a Mac user as well. I have
installed CS3 on my
> MacBook Pro 2.4/4GB/10.5.2 with the expectation of
getting at least good
> performance with the (IMHO) premiere Web/DE App - but
no. CS3 is sluggish to
> say the least on my Mac, with performance of synching
files and
> opening/modifying page components at almost unusable
speeds. I have done the
> 'Open Using Rosetta' thing and it only made a slight
difference. So, I googled
> the issue and am AMAZED that this is a well known
problem with CS3 by various
> accounts posted out there.
>
> Really? Seriously? For all the design community on the
Mac and the large
> number of web designers using this piece of software
that this stands? Where is
> the fix from Adobe? It's not like this suite was just
released last month! Very
> sad (I can't stress how sad this is!) when I have to go
BACK to the PC for a
> smoother work environment to design web pages...
> -
Design View Problems in Dreamweaver CS3
Hello folks,
I've been having design view issues in Dreamweaver CS3 on my
Windows XP 2002 SP2 computer. When placing library items in tables,
the library item will disappear from design view, and sometimes
columns or rows in disappear as well. The code remains unaffected
and the pages appear okay in all browsers, but not having preview
working correctly is definitely a disadvantage. Has anyone else
experienced this problem and, if so, do you know of any fixes?
Many thanks!
BrookeThis is nearly diagnostic for an improperly made Library
item.
Do your Library items contain <html>, <head>, or
<body> tags? Do they
contain CSS rules?
If not, can you show us a page that is doing this for you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"brookest" <[email protected]> wrote in
message
news:fm5h9k$4k1$[email protected]..
> Hello folks,
> I've been having design view issues in Dreamweaver CS3
on my Windows XP
> 2002
> SP2 computer. When placing library items in tables, the
library item will
> disappear from design view, and sometimes columns or
rows in disappear as
> well. The code remains unaffected and the pages appear
okay in all
> browsers,
> but not having preview working correctly is definitely a
disadvantage. Has
> anyone else experienced this problem and, if so, do you
know of any fixes?
> Many thanks!
> Brooke
> -
Dreamweaver CS3 Design View Problem
I am trying to edit a Dreamweaver site using Dreamweaver CS3 on a Windows XP workstation at work. The site structure was developed by an outside vendor and has been designed using CSS for positioning -- no tables. It is my responsibility to finish the site using template pages provided. When viewing the site in several browsers -- both Mac and PC, everything is fine. When I open the site in Dreamweaver CS3 Windows, all of the positioning is off -- the menus that should be flush left of the text colum, instead, appear at the top of the text column. This issue is repeated throughout the site. Since I am using existing pages as templates for new ones, I'm forced to make edits in code view, upload and then view in my browser. My outside vendor, so far, does not have an answer to this.
This weekend at home, I've installed an old Dreamweaver 8 trial version on my Macintosh. I downloaded the site and everything looks fine in Design View. Any ideas? Is this a settings issue on my Windows version of Dreamweaver? I do have the Style Rendering setting set to Screen Media type.Hi,
I found this thread after searching and searching for an answer as to why my Design View in DW CS3 started disappearing (even in split view). It will show a partial view, but never the entire view all at once, even after restarting my PC. I have been using CS3 for a few years now and it just started having this issue. When this issue started, nothing had changed on my computer. There has to be a fix for this. Why did it work fine all these years and now, no design view???? -
Drawing AP Divs..In Dreamweaver CS3..
Hi,
Dreamweaver CS3 Question
Ive been trying to draw ap divs on my website and i've been having trouble.
My main issue is when i draw the ap div it disappears after i take my finger off the mouse.
there is no box nor selection handle left in my window.
I've tried going through the preferences and viewing options, but nothing works.
Is there a way to set my preferences back to default?
any suggestions would be greatly appreciatedon a blank page in layout mode,
Thank you. You cannot draw a/p divs in Layout mode. You shouldn't even be in Layout mode anyhow.
In my opinion, there are three serious problems with Layout Mode -
1. Perhaps most importantly, it sits between you and *real* HTML tables,
and fools you into believing that concepts like "layout cell" and
"autostretch" really mean something. They do not. As long as you use
Layout Mode, you'll never learn one of the most important things for new web
developers - how to build solid and reliable tables.
2. Actually, #1 wouldn't be *so* bad, except that the code that is written
by Layout Mode is really poor code. For example, a layout table contains
MANY empty rows of cells. This can contribute to a table's instability.
In addition, if your initial positioning of the table's cells is a bit complex,
Layout Mode will throw in col- and rowspans aplenty as it merges and splits
cells willy-nillly to achieve the pixel-perfect layout you have specified. Again,
this is an extremely poor method for building stable tables, because it allows
changes in one tiny cell's shape (i.e, dimensions) to ripple through the rest
of the table, usually with unexpected and sometimes disastrous consequences.
This is one of the primary reasons for the final result's fragility - read this -
http://apptools.com/rants/spans.php
3. The UI for Layout Mode is beyond confusing - many options that you might
want to use are inaccessible, e.g., inserting another table, or layer onto the page.
I can understand the new user's desire to use this tool to make their life easier,
but the cost is just too heavy in my opinion. Adobe agrees. Layout mode is gone forever beginning with CS4.
To make good tables, keep it simple. Put a table on the page, and begin to
load your content. If you would want a different table layout, instead of
merging or splitting cells, consider stacking tables or nesting simple
tables instead, respectively.
And above all, do not try to build the whole page with a single table! -
Dreamweaver CS3 Installation Problems
Hello,
I have just got Dreamweaver CS3 and Photoshop CS3 and have
had some real issues with installing them! Here is my situation
explained.
I first installed Dreamweaver CS3 after un-installing a
previous version of Dreamweaver (the one from Macromedia) and it
installed as normal. I then tried to install Photoshop but it only
got as far as 8.46% and would go no further! I did a system restore
and tried installing Photoshop before Dreamweaver and it installed!
I then tried to install Dreamweaver but once the "Adobe Setup" got
to 100% it disappeared and the Installation screen did not appear,
in fact nothing happened! I went in an endless loop of installing
one before the other and have landed and having Photoshop on the
computer and not been able to install Dreamweaver! As I mentioned,
if I don't have Photoshop installed, Dreamweaver will install and
vice-versa.
I'm thinking it is a conflict problem, but I dunno where to
begin looking. I've cleared the computer of useless files and
registry entries (I use a program called CCleaner) and I also went
into
C:\Program Files\Common Files\Adobe and did a search for
'dreamweaver' and deleted everything that came up, just so it'd be
like Dreamweaver was never installed.
I used the CS3 Cleaner because I previously had the PS BETA
but it never worked right and it kept failing when deleting stuff,
so I dunno why that was.
If anyone knows any reason why this is doing it and have any
ways of helping me out, I would be greatly appreciated. Thanks
P.S. I am on Windows Vista Home PremiumYou may experiencing the same problem that I had. If you had
a previous Beta installation installed, it may be preventing the
new installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb401090
quote:
Originally posted by:
joeh75
I upgraded to Photoshop CS and spent four hours with Adobe
tech support (valiant attempts). They told me I should call
Microsoft. Microsoft shuttled me to Dell. Dell told me they could
fix the problem with Windows Installer on my XP Pro system for
$245.
Symptom is that the Photoshop installation gets as far as a
screen that says "Loading Setup," blinks, then goes away. I
re-installed the Windows Installer and the Photoshop install still
fails.
Any help appreciated...
Thanks/Joe -
Having problem with Dreamweaver cs3
My dreamweaver cs3 starts and show the initializing screen then stop working and screen disappear. Other adobe products are working fine. Can anybody guide me how to resolve this issue.
Thanks John,
I got the solution, actually I tried all these stuff. But it was something unique about my problem. It happened sometime before that my DW stop working on particular .php but this time it wasnt restarting and stopping just before finalising the intialising stage. One thing came in my mind, I just tried to change the folder name of the website that was selected in my DW when it stop working and since then it was not opening. And that trick worked for me, I couldnt understand the problem but atleast I got the solution .
Maybe you are looking for
-
R61 hard drive can i install bigger hard drive
got this r61 #8935-a47 from my niece and i'm messing around with it, the hard drive is a 80 gb 5400 rpm can i throw a 160 gb 7200 rpm in it i have here the only difference that i see is the 7200 is 800 mA and the 5400 is 700 mA the 7200 # is p42t
-
TS1717 Apple mobile device failed to start
During installation of iTunes, error message: Apple mobile device failed to start and something about not having "privileges" Some ideas?
-
How can I pass a variable(s) between two swfs?
Hello all, I was wondering if it is possible to pass variables between two standalone swfs that are not being hosted on a webserver. I am creating a flash projector to go on a CD Rom and want to load another swf into the _root level and in the proces
-
When a title is added, Flex selects a title which is oriented vertically and pointing downward. How can I set the orientation of the title, for examle, to be 180 degrees rotated?
-
I CANNOT export a movie in CS4, that was simple in CS3
Recently upgraded from CS3, and have run into an absolute brick wall - CS4 will not allow me to export a movie. It opens Media Encoder, and I run the queue, and after about 30 seconds it comes back with an error log saying "Error Compiling Movie: Unk