Disappearing Tables in Terminal Server after reboot/log off

After installing Crystal Report in Windows Server 2003 Terminal Server, I can stand in front of the server (as administrator) AND/OR Terminal into the machine as administrator and create reports.
Once I log off my TS session (or reboot the machine), I can stand in front of the server (as administrator) and create reports BUT NOT Terminal into the machine as administrator and create reports.
When I Terminal in, I select my ODBC source, log into it, then I go to add table via Data Explorer. I see them get added, but once I close the Data explorer POOOF, the tables disappear. I also get a "Dos error." when trying to open an already written report that uses the same (now buggy after reboot/log off) ODBC source.
I have absolute full permissions to every single file on the server (and the data source server for that matter). I'm thinking that the ODBC source (a MAS server) likes me for a while, especially after I do the install, but after I log back into the server via a Terminal Session, it dislikes me for some reason. On a side note the connection tests good either way I go into the server.
Please help.

Hello,
If you are using a MAS server then you may also be using a MAS ODBC Drvier? If so please contact Sage for support.
As a quick test, try copying over the Xtreme MDB sample database and use Microsofts Access ODBC driver to see if it is a CR issue or ODBC driver issue.
Sometimes a Repair install can fix these issues also.
And you never said what version of Cr you are using and if any patches are installed?
Thank you
Don

Similar Messages

Mac OS 8.6 Auto network connect to a server after reboot is not working

We have multiple old blue and white systems on a network. All but one will automatically connect to the network when rebooted. I have gone into Chooser, Appletalk, put in the server IP address, put in the server password, checked the boxes that say remember Server name and password for next startup. I can connect at that time with no problem. When I reboot, the server does not automatically hook up. I have to go back into Chooser, etc. I created an alias on the desktop, but it still prompts me for a password to connect. I have performed a clean install of the Mac OS 8.6. It still does not connect to the server after reboot (after configuring all the settings again after the clean install). Please help..

Hi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

OC4J shuts down after I log off from the server !!!?

Hi,
I have a startup batch file to start OC4J on my customer server. Usually I connect to their server from my office via terminal server (and VPN) and run this batch file as a job via scheduled jobs in WINDOWS to start OC4J. My problem is that the OC4J shuts down as soon as I log off from their server. But it stays running if I disconnect from their server.
This problem happing on a new installed server but on the old one I have not this problem. Probably it should be some parameter setting that I missed.
Would appreciate any help on this.

java -jar oc4j.jar
This is the most basic form. But the above must always be part of the command for launching OC4J.Avi, this is so not true.
One can always starts any standalone java problem by specifying the main class, the class whose main method is the entry point:
java -classpath somePath theMainClass (since some historic time that we should not care anymore.). So it is perfectly ok to
start oc4j 9.0.4 by, after changing to the directory where oc4j.jar lives,
java -cp oc4j.jar com.evermind.server.ApplicationServer or start oc4j 10.1.2 by
java -cp oc4j.jar com.evermind.server.OC4JServer or start oc4j 10.1.3 by
java -classpath oc4j.jar oracle.oc4j.loader.boot.BootStrap Here each oc4j.jar must come from an oc4j installation so that other dependent libraries will be found.
What is nice about "java -jar oc4j.jar" is that it can be used to start any version of oc4j.jar. One does not have to specific the main class, which might change over time as shown above. That is the reason why it is overwhelmingly widely seen. Avi, I would agree if you just meant to recommend that "java -jar oc4j.jar" be used instead of the above.

Server keep running after user log-off?

Just need confirmation...
Does it keep running all services (mail, web, etc...) after logging off a user from macosx 10.5.4 server?

thanks. just need to create new user and log in because current user's finder is relaunching on almost every action with it... want to try if it's problem with user or all system.

Applications still run after user logged off

Hi,
I have a w2k8r2 Terminal server and have a problem that have eluded me for some time now.
When a user is logged off, by either being disconnected or being inactive for a prolonged time, the user initiated programs are still running.
To be more exact, Some times when a user is logged off I have the following situation:
In the task manager on the users tab I cannot see the user anymore (nor in the remote desktop services manager), but in the Processes tab I can still see user initiated programs running. Furthermore I am not able to kill any of those programs, getting an
"Access is denied" error message.
My problem is that when the Terminal Server enters this "state" it becomes all buggy and itchy, causing loads of problems for the users that are already logged in (and for the new ones trying to log in). The only solution I have found is rebooting
the server.
Any solution, or further troubleshooting steps, are more than welcome. For me the next step is reinstalling which I really don't want

1. Check any task schedular is running for application or not,
Refer :
http://answers.microsoft.com/en-us/windows/forum/windows_7-security/if-i-log-off-at-night-leave-computer-on-will/559eec53-1d2a-46f8-ac12-f0d4a32ab57a?msgId=b51d42b3-e727-40c0-b94e-8a01b31bf526
2. Also update Antivirus and scan completely.
3. Is it specific application or all the application, Which user opened in his session?
4. If specific application is running (In this scenario Outlook is running even user logs off), Try the below Citrix forum thread.
Refer :
http://discussions.citrix.com/topic/301644-user-logs-off-process-outlookexe-stays-active-error-the-citrix-server-has-reached-its-concurrent-application-limit/
5. Check and update TCP/IP driver
Refer : http://support.microsoft.com/kb/2465772/en-us
6. Also cross verify Dharmesh suggestions also.
Regards,
Manjunath Sullad

How do make inactive RFC sessions timeout after user logged off?

Hi,
In SM04 we can see many sessions of type RFC belonging to users who already logged off. These sessions seem to stay allive for hours if not days.
Exapmle:
700 HAMILTONAN                                09.45.35    1 RFC                     8
700 CHUAE                                     04.08.10    1 RFC                    50
700 LIMMA                                     02.18.12    1 RFC                    45
The standard icm timeout settings are set and works fine, but for some reason these assosiated RFC sessions seem to stay logged on.
Is there any parameter maybe or any other solution anyone is aware of to make these sessions log off if inactive?

Hi,
Its basis activity but still ,
Have a look at this parameter <i><b>rdisp/keepalive_timeout</b></i> it should be set to some seconds, after which if user stays idle system will force fully logged them off...
How to Change : RZ11 -> put the parameter name -> Change ...
Hope that helps.
Regards
Mr Kapadia

Chat window stays open even after i log off

When ever i log off with a chat window open...it stays open when i log back on. Is it possible to not do that, Leopard never did that???

Hi Carolyn and Lud@,
I must admit I would have suggested that as well.
If the iChat 4 setting for Remembering Chats had been set there is nothing in iChat 5 to reset it.
In Theory clearing the window and Quitting iChat should delete the item from the .plist
Deleting the said .plist and restarting iChat would have caused iChat to recreate the .plist from Defaults and the Remember Chats Across Launch item would not be there.
What we could do with knowing now is, does the Window have any info at the top as to who and/or what room the chat is associated with ?
It may pay to check the File Menu of iChat to Check if this "Chat" that keeps popping up is in the Recents lists.
8:33 PM Tuesday; September 1, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Cannot start Infra and App Server after reboot

I have installed iAS 10.1.2.0.2. on Solaris 2.9 -infra and appserver on same box. After installation I was able to configure Discoverer etc. The machine was rebooted recently and I cannot get the infrastructure and app server to start. opmnctl startall just hangs.

I think borkur is probably right.
We have our midtiers on different machines from the infra, but nonetheless, you could use the same sort of startup script.
What I do is go into a wget wait loop on the mid-tiers before trying to opmnctl start them:
#! /bin/bash
# script waitfordas
DAS_RESPONDING=`wget -q -O - http://infra.mycompany.com:7777/oiddas > /dev/null; echo $?`
echo Waiting for DAS to be up on infra.mycompany.com...
while [ "$DAS_RESPONDING" -eq 1 ]
do
sleep 10
echo Waiting for DAS to be up on infra.mycompany.com...
DAS_RESPONDING=`wget -q -O - http://infra.mycompany.com:7777/oiddas > /dev/null; echo $?`
done
echo DAS responded.
Then I call this in my startup script:
#! /bin/bash
# oracleas Start/Stop the Oracle Application Server
# chkconfig: 2345 99 10
# description: Starts and stops the Oracle Application Server
exec 2>/tmp/oracleas.err 1>/tmp/oracleas.log
# Source function library.
# . /etc/init.d/functions
RETVAL=0
ORA_OWNER="oracle"
ORA_HOME="/opt/oracle/product/as904mid"
EM_HOME="/opt/oracle/product/agent"
# See how we were called.
prog="oracleas"
start() {
echo -n $"Starting $prog: "
su - $ORA_OWNER -c "/home/$ORA_OWNER/bin/waitfordas"
su - $ORA_OWNER -c "$ORA_HOME/opmn/bin/opmnctl startall"
RETVAL=$?
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl start iasconsole"
su - $ORA_OWNER -c "$ORA_HOME/dcm/bin/dcmctl start"
su - $ORA_OWNER -c "$EM_HOME/bin/emctl start agent"
return $RETVAL
stop() {
echo -n $"Stopping $prog: "
su - $ORA_OWNER -c "$ORA_HOME/opmn/bin/opmnctl stopall"
RETVAL=$?
su - $ORA_OWNER -c "$ORA_HOME/bin/emctl stop iasconsole"
su - $ORA_OWNER -c "$EM_HOME/bin/emctl stop agent"
return $RETVAL
restart() {
stop
start &
case "$1" in
start)
start &
stop)
stop
restart)
restart
echo $"Usage: $0 {start|stop|restart}"
exit 1
esac
exit $?

2012 r2 rds deployment cannot connect to sql server after reboot

We have a ha connection broker setup with 2 connection brokers and everything was working fine up untill the servers were rebooted for updates. Now users cannot connect to thier collections and I have an error in the event log that the deployment could not
connect to the sql database.
at this point I am assume that the issue is related to security. I am able to query the database as admin from the effected servers and other services that use other databases in the same sql instance are no5 having issues.
I have checked the security group that both cb servers should be in and they are in the group and the group has sysadmin and dbo within sql
any ideas?
Please remember to mark my replies as answers if they help

Hi,
Thank you for posting in Windows Server Forum.
Can you please create the database manually with below command and verify.
PS C:\> Set-RDConnectionBrokerHighAvailability –DatabaseConnectionString
"DRIVER=SQL Server Native Client 11.0;SERVER=<SQL Server
Name>;Trusted_Connection=Yes;APP=Remote Desktop Services Connection Broker;
DATABASE=<DB Name>" -DatabaseFilePath "C:\DbFiles\<DbName>.mdf"
-ClientAccessName "<DNS RR Name>"
Grant DBO permissions to the service account on the RDS server and try to run your wizard again.
More information.
RD Connection Broker High Availability in Windows Server 2012
http://blogs.msdn.com/b/rds/archive/2012/06/27/rd-connection-broker-high-availability-in-windows-server-2012.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Cannot conect to Job server after redirecting log files

Platform: Windows
Software: Data Services 3.0 (Data Integrator 12.0.0)
Issue: When redirecting the Log files to go to another drive on the windows Server, we are unable to reconnect to the Job Server with Designer.
We did the following to re-direct the Log files:
In the DSConfig.txt file on the machine where the jobserver runs, they will find a section similar to the following:
[AL_JobServer]
AL_JobServerPath=C:\PROGRA1\BUSINE1\DATAIN~1.7\bin\al_jobserver.exe
AL_JobServerLoadBalanceDebug=FALSE
AL_JobServerLoadOSPolling=60
AL_JobServerSendNotificationTimeout=60
AL_JobServerLoadRBThreshold=10
AL_JobServerLoadAlwaysRoundRobin=FALSE
AL_JobServerAdditionalJobCommandLine=
ServiceDisplayName=Data Integrator Service
AL_JobServerName1=WestJS
AL_JobServerPort1=3500
AL_JobServerRepoPrefix1=
AL_JobServerLogDirectory1=
AL_JobServerBrokerPort1=
AL_JobServerAdapterManager1=
AL_JobServerEnableSNMP1=
AL_JobServerName2=EastJS
AL_JobServerPort2=3501
AL_JobServerRepoPrefix2=
AL_JobServerLogDirectory2=
AL_JobServerBrokerPort2=
AL_JobServerAdapterManager2=
AL_JobServerEnableSNMP2=
(As with any DSConfig.txt edits, I always tell customers to be very careful, to only follow instructions they receive from customer assurance, and to make backups of the prior file in case they need to revert.)
Note that there is a u201CWestu201D jobserver defined with the 1 suffix, and an u201CEastu201D jobserver defined with the 2 suffix. Both jobservers will by default log into %LINK_DIR%\log\ into a directory named after their jobserver name. If the customer wants to redirect the logs for the u201CWestu201D jobserver to a different path, add the following to this section:
AL_JobServerLogReDir1=D:\dierrorlogs\Log
Note the use of the suffix 1 u2013 it means that it will be a part of the settings for the u201CWestu201D jobserver. The u201CEastu201D jobserver will still log to %LINK_DIR%\log\EastJS while the u201CWestu201D jobserver will log to D:\dierrorlogs\Log.
All we did was add the one single line AL_JobServerLogReDir1="E:\Program Files\BusinessObjects\dierrorlogs\Log"
Can anyone give us some sort of suggestion or idea as to why we lost our connection to our Job Server with this change? We DID restart the service.
Thanks! Ken

I am not sure if this Parameter actually works ? I have to check that
can you see the JobServer process in the task manager ? check the windows event log for any errors for the JobServe
since you modified the path, I don't think it will be generating any log file for Job server
what's the status for the job server in Desginer and Management console ?

How to login as a non root user into linux server after rebooting

Hi,
Even though it is not related to Oracle, but i assume that all you are aware about linux.
I wrote a script to make DB up automatically when i reboot the server. But i have to login into the sever as the nonroot user instead of root user automatically.
How can i do this?
Thanks
Mahi

See "How do I get Oracle to automatically start when my server boots up?" in http://orafaq.com/faqunix.htm

2003 terminal server. Clients log in , see their desktop and then it changes to a fake windows desktop.

I figured this was a virus or malware, and have scanned the server but have not found the virus/malware.
Because of the delay of the fake screen popping up, I figured it was in the startup folder, but it is not.
Malware Bytes only detected a possible threat in a download forlder, but that was eliminated.
Any clues where to look?

Hi,
You've posted in the wrong forum, this is a PowerShell forum.
Perhaps the Server general forum will be able to help you:
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=winservergen&filter=alltypes&sort=lastpostdesc
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

How do I get my AppTabs to stay in place after I log off?

I am able to create AppTabs and they remain in place when I close Firefox and then reopen it. However after the computer has been closed down and I reopen it my AppTabs have disappeared.
Thanks

App (pinned) tabs and Tab Groups (Panorama) are stored as part of the session data [1] in the file sessionstore.js [2] in the Firefox profile folder [3].
Make sure that you do not use "Clear Recent History" to clear the "Browsing History" when Firefox is closed because that prevails and prevents Firefox from opening tabs from the previous session.
* https://support.mozilla.com/kb/Clear+Recent+History
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js
* [3] http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox
It is also possible to use the "Show my windows and tabs from last time" setting, that is usually a more reliable way to restore session data.
* [http://kb.mozillazine.org/Menu_differences Firefox/Tools > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Printer does not retain network security key , after I log off and log back on .

I have a HP Photosmart , eprint wireless printer. For some unknown reason, everytime I shut down my laptop and then restart it. My printer does not remember my Network Security Key, and I have to put it back in on the printer keypad. This is not only slow, but a real pain ! How can I get the printer to store my security settings permanently ? Thanks !

What operating system does the computer use?
What model is the printer?
What brand/model is the router?
Is WEP or WPA being used?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Terminal Server Freezing

I have several Terminal Servers that run Windows 2008 R2 that have been having issues recently. We just started requiring Smart Card Authentication on the server. Logon works with both username
and password and smart card logon. The smart card is required for Exchange services. A little after we changed to this, our terminal servers have begun freezing. By "freezing", I mean that when the users log on via their Thin Clients or Remote Desktop,
they are stuck at the "Group Policy Client is updating" screen. They are not able to log on to another terminal server (we have them all set in round robin for load
balancing) unless we log them off. When we log into the server, we must log on via the local machine by going into XenCenter because we get stuck when trying to just remote into them. Once this begins to happen though, we are not able to log the user off. We
can open Task Manager and click log off the user but they never get logged off. RDSM also stops reporting users logged into the servers as well. The only way we have been able to clear the users and fix the problem has been to restart the server and that logs
off dozens of users. <o:p></o:p>
This is an unacceptable situation here that's causing a lot of problems for our users and we tried a last ditch effort of rebuilding all of the servers. After rebuilding them all and getting
them online. They were acting fine for a few days. Now they are starting to do the same thing as the older servers and have the same problems. I have been googling fixes for this issue for a week with no solutions working so far. Any help would be amazing
since we are all out of ideas here. Thank you.<o:p></o:p>

Unless you're running 32bit terminal servers as VMs in Virtual Server 2005, this is the wrong forum for help.
Try reposting in the terminal server forum.
https://social.technet.microsoft.com/Forums/en-US/3655b7da-08df-4c11-b170-42f6acd4d6c6/session-on-terminal-server-freezing?forum=winserverTS
https://social.technet.microsoft.com/Forums/en-US/1a416400-824d-4333-aac9-900b41915f1a/2008-terminal-server-sessions-freezing?forum=winserverTS

Disappearing Tables in Terminal Server after reboot/log off

Similar Messages

Maybe you are looking for