Disc 2 damaged - I'm stuck in the middle of a installation process HELP!

Hi, folks.
I sold my iBook last thursday and I was preparing it for delivery. So, I started a Erase & Install of Tiger with the DVDs I received from Apple in order to give it to the new owner with a brand new system and none of my files. The problem is that after disc 1 had been popped out by the system and I inserted DVD 2, I found out it's damaged. iBook won't read it at all.
I tried several things such as copying the DVD in other computers but neither my MacBook nor my wife's PC can even read it. When it's about 20% read, a error messages shows up and process stops.
So, to make long things short, my iBook is stuck in the "Please, insert Disc labeled Mac OS X Installation DVD 2".
Is there a way I could force the system to skip this disc and log into Mac OS X even though I woudn't have the additional software installed? My priority now is to see the computer working.
Thanks in advance.
JP

I would call AppleCare and get a replacement disk, and just wait for it to come. Keep the machine where it won't overheat on a surface made of metal or stone glass, or plastic, and keep it plugged in.

Similar Messages

  • Disk utility stuck in the middle of system installation

    I have just fitted a new solid state hard drive. My old drive is now where my non functioning Superddrive users to be, which is working fine.
    I started by giving my new drive one partition with disk utility. That was fine and I began to install OS Lion. The machine restarted.
    Then I got a message to say that my disk was damaged and that I should run disk utility. Within the installer programme I went back and clicked on 'Repair disk'. However disk utility reported no problems. So I tried to repartition my drive. This is where the utility got stuck 'waiting for disks to reappear'. Eventually the machine started getting hot, so a hard restart seemed my only option. Soon I was back in disk utility and still there was no reported damage to my drive. Partition restored, (by selecting 'Erase' rather than 'Partition'), I went on with my installation, but this time was told a recovery partition couldn't be created. Back into disk utility, still no damage but the partition 'erase' is trying to restore is taking forever!
    What should I do now? It looks like my plans for a faster system are doomed!

    I forgot to update you on what has happened since.
    I wanted to get back into the system on my old hard drive. Disk Utility was totally stuck and so I hard restarted once more. I seemed to be going round in circles but was glad to see that every time I asked D.U. to repair my new drive it reported that all was well. Eventually, holding down the option key in the vain hope of getting back onto my old drive I found a screen wheere I had the opportunity to start up from the recovery drive, presumeably of my old drive since it had told me it couldn't create one on the new drive.
    I followed this and went through the process again. This time it asked me to sign in and get connected to the internet. I soon realised that it was trying to download the install programme which I know takes ages as I did it yesterday. So I quit out of that and was then finally offered the chance of starting up in my old drive.
    Running D.U. from my old drive revealed loads of red writing. I'm currently searching for my Disk Warrior CD in the hope that it may be reparable as D.U. doesn't seem to be able to do much.
    I can't believe these SSDs are so fragile! They are surely the same technology as the seemingly indestructible flash drives we all carry around on our keyrings and yet I've now had two of these fail me on system installation. Maybe I should just put a flash drive in my computer and have done with it!

  • Ringtone off icon stucks in the middle of the screen

    Dear All
    Just received my new iPhone 5s.
    Switching off the ringtone using the hardware switch
    will signed with a big grey icon on the screen telling me ringtone off.
    This icon normally diappears after a few seconds.
    But thats not the case with my new phone.
    It stucks in the middle of the screen.
    Any idea?
    Br Reck205

    Thank you.  One of the previous answers did the trick.

  • HT1430 my phone is stuck in the middle of an itunes update, it will not turn back on, can someone help please?

    My phone is stuck in the middle of an itunes update... it will not reset or return to main screen.  Can anyone help?

    Here is a starting point
    http://support.apple.com/kb/TS3281

  • RHEL4U5 X86-64 HVM guest has the mouse stuck in the middle

    I just created the HVM RHEL4U5 guest and the mouse is always stuck in the middle of the screen. Pressing Ctrl+Alt does not help either. tried restarting the guest and the VM server multiple times but to no avail. My vm.cfg file already has usbdevice = 'tablet'. Also tried mouseconfig. Anyone else has experienced this issue?
    Thanks

    Hi,
    Thank you so much. Actually Centos is almost same as RedHat. They just change some images and texts containing RedHat copyrights and replace them with CentOS.
    Thank you for your suggestion though. I'll use those templates. However, this mouse problem is kinda known problem I guess. I applied the suggestion in troubleshooting section (http://download.oracle.com/docs/cd/E11081_01/doc/doc.21/e10898/troubleshoot.htm#insertedID7) but did not work.
    Thanks,
    Habib

  • Flash movie gets stuck in the middle

    Hey,
    I have simple sliding pages mechanism in my flash file, all done with AS3 code. Now the pages, which are movieclips, are slid off the screen on a button press. Sometimes, everything goes smoothly, but on some people's computers the sliding pages get stuck in the middle, and then the next slide starts from the wrong position. This throws everything off the loop...I cannot understand why this is happening..as it only happens sometimes...I have rechecked the code millions of times...why is this happening??? Is it the code??
    The file can be checked out at http://cleatbeat.com/halftime/issue5/index.html.
    Any suggestions will be greatly welcome..am I doing something wrong in the code...??
    Cheers,
    Aditi

    Can't say anything without seeing the codes.
    I guess you have some errors at calculating the sliding effect.
    When clicked too fast sliding errors occur.
    You have to disable the click event till the the page stops at the right position  (removeListener for the button, then addListener....)

  • Stuck in the middle of HD replacement!

    ifixit.com provides real good help with their guides. Cheers!
    However, I'm stuck in the middle of replacing the HD and am just looking for a shoulder to cry. Why stuck?
    At the electronics store where I bought the HD they mistakenly (or on purpose?)gave me a S-ATA drive instead of the Ultra ATA/100 (or ATA-6), it's just one letter difference in the specs. Unfortunately I did not check on the drive itself, but the bill states the corect drive. I hope they will still be ale to change the drives after 10 days of purchase now. Hmmm... old little iBook taken all apart and waiting for a HD on the kitchen table...makes me sad.

    Sorry to hear of your misfortunes, but the store should definitely exchange the hard drive they gave you for the one you actually ordered and paid for. Very likely it is just an error--it serves no one's purpose to intentionally substitute one for another. With just one letter different, it would be an easy mistake to make.
    Hopefully you will get the right one in soon and can reassemble your iBook and go back to using your kitchen table for eating.
    Good luck!

  • Stuck in the middle of install of snowleopard

    my son is stuck in the middle of installing snowleopard,.
    He has a macbook pro. and had leopard before.
    The installation went for an hour but is now stuck on the gray screen with the apple and the little circle going round and round, no other progress bar and has been like that since YESTERDAY! yikes.
    We couldn't get the disk out, shut down comp with the power button but when started again is still on that screen.

    I had the same Problem on Saturday. Booting with "C" Key pressed and reinstallation helped...
    Theres an official Document on this issue:
    http://support.apple.com/kb/TS2990
    Hope this helps,
    tiktoor

  • My iphone is stuck in the middle of an Apple OS update

    My iphone is stuck in the middle of an Apple OS update. How do I get out of it?

    Click here and follow the instructions.
    (108826)

  • My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    My macbook pro keeps booting up, then after a few seconds, goes back to the sign in page. This happened after I was doing software updates and my computer restarted in the middle of an update. Help! Thanks.

    Start up in Safe Mode.
    http://support.apple.com/kb/ph14204
    Repair Disk    Section: "Try Disk Utility"
    http://support.apple.com/en-us/HT203176

  • I am trying to recover or restore my phone but it either says, error has occurred or it says they cannot find my iphone. It is stuck on the loading apple logo. Please help!

    I am trying to recover or restore my phone but it either says, error has occurred or it says they cannot find my iphone. It is stuck on the loading apple logo. Please help! I dropped it hard, maybe thats why it is not working.. and i put a new screen on it.

    to doublecheck you tried everything error 3194 http://support.apple.com/kb/TS3694#error3194

  • So I just updated my MacBook (2009 model) to Maverick and I tried signing into Facetime and iMessage but it just stays stuck in the log in screen.  Any help?

    So I just updated my MacBook (2009 model) to Maverick and I tried signing into Facetime and iMessage but it just stays stuck in the log in screen.  Any help?

    same problem, its driving me crazy, never had this crap with any other phone

  • My podcasts download over the size it says ***? and my normal podcasts get cut off somewhere in the middle *** is this ****? someone help before i move to android

    my podcasts download over the size it says ***? and my normal podcasts get cut off somewhere in the middle *** is this ****? someone help before i move to android

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • 2.1.0.1526 software update stuck in the middle

    Hi, I have connected my playbook to laptop and downloading the 2.1.0.1526 software on to my playbook.. For some reason it is stuck at installing module 32 of 46 for the last 1.5 hrs. At this point it looks like i cant cancel the update..would my playbook become unusable if i disconnect from the blackberry desktop software and force cancel it? I have backed up the playbook before this update..Not sure how long i need to wait. Please advise. Thanks. ,

    Is the playbook connected to laptop for power purposes and you are downloading the update via wireless or did you download the update to the laptop and doing the update via connection to laptop..If you are connected to laptop for power/charging..that method does not offer enough power for a charge..via the wall plug is the recommended and only working method other than purchasing a rapid charger for about $40 which uses the three prong connection on the bottom of the PB..As for removing the PB now in the middle of the update, I am not sure...If you do, worse comes to worse, you may have to zeroize the notebook and start over again...just dont use the usb to laptop for power anymore
    Gene

  • Program gets stuck in the middle of a click

    When I'm using Google Chrome for browsing this happens a lot. It's when I'm clicking something, like a new tab,  a link that opens a new tab or basically anything, Chrome gets stuck, does not freeze or anything, just stuck. The mouse, keyboard and everything works. But because of that, all pages stops loading until I click the trackpad once again. Then everything is back to normal.
    It almost seems like the OSX thinks I'm "dragging" something. But I can't see that there is anything under the mouse pointer.
    The issue have been present for more then a year.
    I've also never ever had any issues with my trackpad in any sense. I think this is software related. 
    The problem occurs frequently in Google Chrome. I can't remember if it happens in any other application.
    I also can't reproduce it. Problem seem to happen randomly.
    Anyone else have the same issue?
    Suggestions on how to fix this? Or what it could be?

    Hi IamMille and welcome to Apple Support Communities,
    First update your software to at least 10.6.8.
    Then reset PRAM and SMC:
    http://www.guidingtech.com/30498/what-is-pram-smc-mac-reset/
    >It almost seems like the OSX thinks I'm "dragging" something<
    It might be that there is a cable problem w/ the trackpad or the track pad needs an adjustment.
    Worst case, replace the track pad.

Maybe you are looking for

  • EDI order Segregation

    Hi i'm new to EDI environment! The requirement is to make EDI robust enough to handle software orders(ZSW order type) in addition to the regular orders(ZEDI and ZCAT).We have a third party tool which submits order to Sap from sources like(customers o

  • Iphone 4 camera freezes in movie mode

    iphone 4 camera freezes in movie mode

  • Flash pro CS55 vs. Flash Builder 45

    Dear Adobe Community, I have been a Flash Pro (AS3) programmer for some time, but since the advent of Adobe Air for Android and iOS this year, I've been seen increasing momentum in the use of Flex and Flash Builder 4.5. For both Adobe moderators/expe

  • Perf.Tuning

    Hi everybody, Iam new to this oracle sql tuning. call count cpu elapsed disk query current rows Parse 1 0.00 0.00 0 0 2 0 Execute 46 0.42 4.61 717 47066 4332 6049 Fetch 0 0.00 0.00 0 0 0 0 total 47 0.42 4.61 717 47066 4334 6049 Misses in library cach

  • HT1766 For some unknown reason, I cannot access the internet through my Wi-Fi connection, even in my own house with the computer on.  What shall I do?

    I cannot access the internet with my Wi-Fi connection on my IPad2.  It began with my trying to reply to a message.  I then got a msg that I had the wrong password or user name.  Now I have no access and cannot get or send mail, or access the internet