Disc burn error 0xFFFFFFCA?????? PLEASE HELP!!

I have been trying to use Backup 3 (yes it is the Leopard approved version) since upgrading to Leopard (I did not do a "clean" install) to burn to DVD.
The following occurs everytime.
My DVD-RW is ejected and this message appears:
Burn Failed
There was a problem burning this disc. 0xFFFFFFCA
My options:
Cancel Entire Backup Retry
It doesn't work on retry.
It WILL erase the data on disc after inserted for the burn and the disc shows up on my desktop and definitely spins in the drive and is recognized as being in the drive and the disc to burn to. It fails after only copying files.... (which it doesn't appear to completely finish).
Could the problem be the fact that Backup 3 application names the burn drive as SuperDrive when before Leopard and the new Backup 3 it always listed what my iMac was installed with and what I actually have:
PIONEER DVD-RW DVR-K06:
Firmware Revision: Q609
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2000 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: Insert media and refresh to show available burn speeds
I turn to all of you after spending 1 hour and 45 mins on hold for Apple help, first person had no clue and put me back on hold for someone else who supposedly would have a clue, MAYBE...
PLEASE HELP!!
thank you humbly from someone who admits outright I am SUCH A NEWBIE.

Same thing to me using LiquidCD CD/DVD burning application on Leopard 10.5.1
It worked fine for 10 DVD backups and when trying another backup on DVD, I have this error 0xFFFFFFCA
Anybody to help ?

Similar Messages

Disk Utility DVD+R DL Burn Error..Please Help

I am trying to burn my backup image of Retail OS X Leopard 10.5.6 onto a DVD+R DL so that I can re-format my macbook because I have been experiencing some issues lately. The image is verified but about half way through the disk writing process, it says that it is finishing the burn, closing the disk, and than I get an error.
I have tried to burn the image on 2 different brands of disks wondering if that may be the issue (Verbatim and Memorex), but I am still having problems. My macbook is about a year old so I'm hoping that its not a hardware issue because the drive works for everything else.
I'm hoping that someone can help me figure out how to get the leopard image on a dvd since disk utility is not working properly. I also have an external usb hard drive, but I'm not sure if I can use that to boot my macbook with??
Here is the disk utility log excerpt:
2009-08-31 19:25:53 -0700: Disk Utility started.
2009-08-31 19:31:50 -0700: Burning Image “Mac OS X Install DVD.dmg”
2009-08-31 19:31:57 -0700: Image name: “Mac OS X Install DVD.dmg”
2009-08-31 19:31:57 -0700: Burn disc in: “HL-DT-ST DVDRW GSA-S10N”
2009-08-31 19:31:57 -0700: Erase disc before burning: No
2009-08-31 19:31:57 -0700: Leave disc appendable: No
2009-08-31 19:31:57 -0700: Verify burned data after burning: Yes
2009-08-31 19:31:57 -0700: Eject disc after burning
2009-08-31 19:31:57 -0700:
2009-08-31 19:31:57 -0700: Preparing data for burn
2009-08-31 19:33:23 -0700: Opening session
2009-08-31 19:33:31 -0700: Opening track
2009-08-31 19:33:31 -0700: Writing track
2009-08-31 19:46:35 -0700: Finishing burn
2009-08-31 19:47:35 -0700: Closing session
2009-08-31 20:03:20 -0700: Finishing burn
2009-08-31 20:03:26 -0700: Burn failed
2009-08-31 20:03:26 -0700: The device failed to respond properly, unable to recover or retry.
2009-08-31 20:03:26 -0700: Additional information can be found in the ~/Library/Logs/DiscRecording.log log file.
2009-08-31 20:03:26 -0700: Unable to burn “Mac OS X Install DVD.dmg”. (The device failed to respond properly, unable to recover or retry.)
2009-08-31 20:03:26 -0700:
Thanks!!!

Ok I have been experiencing the same issue when trying to create a back up copy of my retail version of MAC OSX Leopard. What I have finally figured out is that you need to create the copy from a image with a .cdr extension. I don't know the details but it works. I blew through too many DVD+R DL disk than i am comfortable with.. they're **** expensive. So this is what I did:
-First create a new image with the disk utility app in your Utilities folder.
-under the format drop down menu, choose "Master DVD, CD". Encryption set to None.
-after you have created the image, then go back to Disk Utility and select the .cdr image that you just created and select Burn. Place a DVD dual layer into the mac and i chose the slowest burn speed.. (2.4). it should burn flawlessly.
Good Luck and hope that helps!

Burning error message please help.

I have a disc image I created and I burned it successfully the first time I tried it. Now everytime I try to burn the same disc image I am getting the below error message. I don't understand how it could have burned the first time, but now I have 12 unusable DVD's. I am burning at 1x speed. Any help would be great.
Thanks,
Doug

Strange...
Can you play the disk image with your Mac with Apple's DVD Player application (you have to double-click on the image to mount it to play it)?
Was the disk image created in iDVD?
You also might try 2x or 4x burning.
What kind media DVD-R or DVD+R) and brand are you using?
F Shippey

Can't burn - error 4261 - please help!

I keep getting error 4261 when I try to burn audio CDs. I was able to do it for awhile just fine and then it stopped working and each time I try now I get partway through burning when it stops, the disk is ejected, and I get error 4261 message.
Here's what I have tried so far with no luck:
1. Decreased burn speed to 2x, on both iTunes and my CD burner
2. Turned off my virus scanning software (Live One)
3. Tried various makes of disks
4. Tried burning a new mix with just songs that I had ripped from my own CDs (i.e., no "protected" iTunes)
5. Updated to latest version of iTunes (7.3)
6. Tried going back to version 7.2
7. Ran diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Dell Inc. Dell DM051
iTunes 7.2.0.34
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
RADEON X300 SE 128MB HyperMemory
RADEON X300 SE 128MB HyperMemory Secondary
Connected Device Information:
DiskDrive, WDC WD2500JS-75NCB1, Bus Type ATA, Bus Address [0,0]
CDROM, HL-DT-ST DVD+-RW GWA4164B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST DVD+-RW GWA4164B, Rev D108
Audio CD in drive.
Found 13 songs on CD, playing time 56:25 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:20:25
Track 3, start time 09:03:00
Track 4, start time 12:43:17
Track 5, start time 16:09:07
Track 6, start time 20:03:02
Track 7, start time 24:53:57
Track 8, start time 29:09:72
Track 9, start time 33:22:52
Track 10, start time 38:01:52
Track 11, start time 42:28:17
Track 12, start time 47:01:25
Track 13, start time 52:02:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 8 10 16 40 48.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GWA4164B on CDR media at speed 16X.
Any suggestions???
Dell E510 Windows XP Pro

I got an Error 4261 message on my computer some months ago while attempting to backup my iTunes music ---about Dec. 2006. Hopefully, the problem is now solved. This was a difficult and time consuming issue to resolve. I shall provide some details of this resolution (worked for me) as I know some others are having the same problem. I hope to post this message to others with 4261 errors.
I have a Dimension E510 computer bought in 2006. I am using Windows XP. My CD ROM burner is as follows: HL-DT-ST DVD +-RW GWA4164B. I wonder if you have the same type CD ROM.
At first, several thoughts came to mind. Google? Never listen to music again. Invest in a sledge hammer? I decided to try and fix the problem and would work on this for the next eight months. Recently, I decided that this problem had to go away. I tried various things to correct the problem often with technical assistance as the following indicate:
Changed copy speed//Did a restore on my computer (no help)// reversed restore
Updated iTunes files//Did virus scans
Contacted a company techie—Discovered my warranty was still good. Cdrom driver was updated. We got the iTunes program to copy a disk. Problem solved?? Time passes.
The problem reoccurs. I contacted a techie again. He was able to get another program to copy on the cdrom I was using to copy iTunes music. I was told that I should contact an iTunes rep. $$. Says cdrom hardware is OK. (One can save files (ex. photos) to a new file created on the desk top and copy them to a cdrom---a test method used.)
I read suggestions about updating my BIOS and chipset on the iTunes message board. Not being a techie I wasn’t so sure about this. (Also Techies did not go in this direction.) Time passes.
I didn’t buy music.
I read messages saying that I should backup my iTunes music.
Called techie again. Updated cdrom driver. We were able to copy data using the same cdrom used for the iTunes copy. (Again this was not a fix. It was indicative of an intermittent/partial cdrom failure which occurred over time, and one manifesting itself in iTunes.) I asked him to try to copy another. Amazingly, this copy failed. Something was wrong. Now we’re getting somewhere. Techie eliminated some startup files to try to determine source of a software error, if one. This did not fix the problem.
Techie deleted a couple registry files. I don’t like deleting registry files because they serve a valuable purpose, but I’m not a techie. Later I was told that this is a routine test procedure. (After the fix I would have to do an update of my iTunes program. iTunes has a repair feature which was on my desktop—a holdover from a previous attempt to fix things with an iTunes update. I ran this repair without harming my music files, and this repaired the program.)
Techie said I may have a problem with my current brands of CD-R disks. I bought and tried other brands---four all total. This did not work.
I happened to attempt to copy some pictures as I was interested in having some developed. To my surprise, my computer stopped the copy citing an error with the copy process. The problem now manifested itself with another software program. Heretofore, I could successfully copy pictures using the same cdrom but not iTunes music.
I called the techie again. I told him what I had done and new error in copying other files to the cdrom. We attempted to use other programs to copy music and picture files on the cdrom. (My thinking is, if they had worked, then the cdrom was OK, and the problem was a software problem and likely involving iTunes---software and not hardware Obviously I wanted a cdrom replacement as this would be easier for me than pursuing imbedded software program issues.) We could not get any software programs to copy files to the cdrom in question. This was a clear indication that the cdrom was defective. We likely used up ten CD-R disks in these latest attempts.
Looking back, there was a subtle indication of a problem with the cdrom. There was a problem with one of the songs I had copied to a new disk (No. 24 of 24 songs on a disk). The song was copied with errors. This shouldn’t have happened.
The company replaced cdrom free of charge the next morning in about 5 minutes. Wow!
I tried the new cdrom and began burning iTunes music right away. No 4261 error message. I also copied pictures to the same cdrom without any error messages. I also successfully used other brands of CD-R disks.
I had problems with iTunes and a photo program after cdrom installation but fixed them with updates. I also experienced problems with Windows Media Player and Roxio/Sonic. They didn’t want to recognize the new cdrom in drive (E:). Restore made things worst so I undid this. I spoke to a tech again about these issues as I wasn’t certain of the scope/nature of problem. Issue of ownership of problem came up again. Software vs hardware. We updated both programs with updates from company support pages. This fixed the problem. Point learned here was the need to keep files updated with the latest and greatest. I am skeptical of too many changes because of risk of problems. Now, it seems, I have no choice but to do this---critical changes at least. Many thanks to Techie.
The thought in my mind now is whether performing updates and specifically on Windows Media Player would have fixed the error to begin with. Well, I did run an update on my iTunes prior to, and there are no updates for my photo program. Looking back I would try the updates/repair first (the easy stuff) before I replaced the cdrom. I spent about 9 hours on phone with techies(caution not to delete music). Without warranty, I couldn’t have afforded this. Luckily for me it was a hardware issue.
Replacing the cdrom on my computer fixed the 4261 error on my computer. I hope something here will be of help to some of you who have the same problem.
Kindest regards. 08/14/07

Problem during burning multiplexing/burning error appers, please help!

I made a movie in imovie that is 1 hour long and contains still pictures and video. It also contains music all the way through it. I exported it to idvd then tried to burn it. It took almost 7 hours for it to get to the burn phase and then it pops up an error saying "problem during multiplexing/burning".
I have made movies in the past and this never has occured, and I have 30GB of HD space.
Any thoughts??

you can use mp3 ...it will simply take longer to encode though ......
http://docs.info.apple.com/article.html?artnum=61636
btw ... don't convert mp3 to aiff (that would be doing things backwards). For example, read these links:
http://discussions.apple.com/thread.jspa?messageID=795036&#795036
http://discussions.apple.com/thread.jspa?messageID=1049799&#1049799
Hope this helps.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Photoshop Elements 8. "Could not use Clone Stamp Tool because of a program error." Please help.

Try this:
Open your picture file
Access the clone stamp tool
Hold down the ALT key on the keyboard and left click on the area from which you wish to clone, then release the ALT key, and click to place the pixels at the destination
TIPS:
It is a good idea to open a blank layer at the top in the layers palette, and do the cloning on this layer. Be sure that "sample all layers" at the top is checked. You can change the layer opacity if necessary
Use the bracket keys next to the letter p on the keyboard to increase & decrease the size of the cursor
Let us know how you make out with the error message now.

It says "error 7, windows error 127" Please help

It says "error 7, windows error 127" Please help

I tried that, got this error:
An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50.727.6195".publicKeyToken="1fc8 b3b9a1e18e3b".processorArchitecture="x86". Please refer to help and Support for more information. HRESULT: 0x8007422.
Please help!

Can't install Adobe Flash player ERROR. Please help

I tried to download the update of Adobe Flash Player BUT every time I try to download it... Look at the screen shot. ERROR.
Please help me I am really happy if someone here can help me.

Hello,
The log file indicates there are permissions issues on a couple of files and they are not being removed. This is preventing the installation of the new version. Please run the uninstaller, posted here Uninstall Flash Player | Windows, and post an updated FlashInstall.log file, and a screenshot of the files remaining in the /Macromed/Flash directory after running the uninstaller. Please only run the uninstaller and do not attempt to re-install at this time.
Thank you.
Maria

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

After the IOS7 update, i can no longer use my imessage and facetime. It says "waiting for activation" and tried to log in on my apple id but it turned out to connection error. Please help me guys! Thank you.

Have you tried to reboot your phone(hold home and lock button simutainiously)?

Error 1001 - please Help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

I am going crazy! the software update keeps on displaying the error code 1001.
I've been trying to activate my tablet since saturday, but it won't let let... it keeps on informing me of the unknown error!@
please help!

My iPod is jailbroken and does not work. It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help

It is now in DFU mode. It doesnt let me fix it When I restore it, it says error 3194.Please Help me!

Go elsewhere. JB voids the Apple warranty and means you will get no support from Apple, including from this Apple forum.

TS3221 my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

my iphone 4s is not connecting with itunes and giving me a message of unknow error 0xE8000012 Please help me out

You've managed to permanently damage the phone. As gdgmacguy suggests, buy a new one. Preferably from a legitimate source.
You may also want to keep in mind that it is illegal to use the Gevey SIM in pretty much every country on the planet. It may still be legal on the continent of antarctica, but that's only because penguins don't use cell phones as a rule.

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

After i updated my iphone 4s from 8.1.2 to 8.1.3 problem occurred.i cant restore and update my phone?saying that iphone could not be restored,an unknown error ocuurred.please help me?

Thanks for the update and clarification. In researching the issue it seems that the 2003 error code may have something to do with the USB connection. I would use this section of one of the above articles:
Get help with iOS update and restore errors
If the USB connection between your device and computer is interrupted, you might not be able to update or restore.
To narrow down the issue, you can try different equipment:
Use the USB cable that came with your device, or a different Apple USB cable.
Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
Try a different computer.
Solve other issues with the USB connection, then with your security software.
If you still see the error message, check for hardware issues by following the next section.
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

HT201210 i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

i cannot get my phone out of recovery mode, when I tried to restore on itune it gives me error 1608. please help me

While YOU may not have attempted to jailbreak the phone, SOMEONE ELSE did. Error 1015 occurs by attempting to restore a previously jailbroken phone.
It's very likely you may NEVER get your phone out of recovery mode and your phone may be rendered permanently bricked.
Terms of Use of this forum prohibit the discussion of jailbroken phones. You'll have to scour the internet for a solution to your problem, if indeed one exists.

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP

Hi i have problem with my hp mini is giving me a error CNU9391WZR PLEASE HELP
Hp mini 110 1140el

Yes bios password, i forgot my windows password so im trying to reset to manufacturing settings but keeps asking me for bios password... Please help

Disc burn error 0xFFFFFFCA?????? PLEASE HELP!!

Similar Messages

Maybe you are looking for